diff --git a/code/espurna/config/general.h b/code/espurna/config/general.h
index e1850a7a..cf72d2dd 100644
--- a/code/espurna/config/general.h
+++ b/code/espurna/config/general.h
@@ -1730,6 +1730,63 @@
 
 #endif
 
+//Remote Buttons SET 5 (another identical IR Remote shipped with another controller as SET 1 and 2)
+#if IR_BUTTON_SET == 5
+
+/*
+   +------+------+------+------+
+   |  UP  | Down | OFF  |  ON  |
+   +------+------+------+------+
+   |  R   |  G   |  B   |  W   |
+   +------+------+------+------+
+   |  1   |  2   |  3   |FLASH |
+   +------+------+------+------+
+   |  4   |  5   |  6   |STROBE|
+   +------+------+------+------+
+   |  7   |  8   |  9   | FADE |
+   +------+------+------+------+
+   |  10  |  11  |  12  |SMOOTH|
+   +------+------+------+------+
+*/
+
+    #define IR_BUTTON_COUNT 24
+
+    const unsigned long IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = {
+
+        { 0xF700FF, IR_BUTTON_MODE_BRIGHTER, 1 },
+        { 0xF7807F, IR_BUTTON_MODE_BRIGHTER, 0 },
+        { 0xF740BF, IR_BUTTON_MODE_STATE, 0 },
+        { 0xF7C03F, IR_BUTTON_MODE_STATE, 1 },
+
+        { 0xF720DF, IR_BUTTON_MODE_RGB, 0xFF0000 },
+        { 0xF7A05F, IR_BUTTON_MODE_RGB, 0x00FF00 },
+        { 0xF7609F, IR_BUTTON_MODE_RGB, 0x0000FF },
+        { 0xF7E01F, IR_BUTTON_MODE_RGB, 0xFFFFFF },
+
+        { 0xF710EF, IR_BUTTON_MODE_RGB, 0xD13A01 },
+        { 0xF7906F, IR_BUTTON_MODE_RGB, 0x00E644 },
+        { 0xF750AF, IR_BUTTON_MODE_RGB, 0x0040A7 },
+        { 0xF7D02F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FLASH },
+
+        { 0xF730CF, IR_BUTTON_MODE_RGB, 0xE96F2A },
+        { 0xF7B04F, IR_BUTTON_MODE_RGB, 0x00BEBF },
+        { 0xF7708F, IR_BUTTON_MODE_RGB, 0x56406F },
+        { 0xF7F00F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_STROBE },
+
+        { 0xF708F7, IR_BUTTON_MODE_RGB, 0xEE9819 },
+        { 0xF78877, IR_BUTTON_MODE_RGB, 0x00799A },
+        { 0xF748B7, IR_BUTTON_MODE_RGB, 0x944E80 },
+        { 0xF7C837, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FADE },
+
+        { 0xF728D7, IR_BUTTON_MODE_RGB, 0xFFFF00 },
+        { 0xF7A857, IR_BUTTON_MODE_RGB, 0x0060A1 },
+        { 0xF76897, IR_BUTTON_MODE_RGB, 0xEF45AD },
+        { 0xF7E817, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_SMOOTH }
+
+    };
+
+#endif
+
 #ifndef IR_BUTTON_COUNT
 #define IR_BUTTON_COUNT 0
 #endif
diff --git a/code/espurna/config/hardware.h b/code/espurna/config/hardware.h
index 7e8e2f07..eb4f6034 100644
--- a/code/espurna/config/hardware.h
+++ b/code/espurna/config/hardware.h
@@ -4189,6 +4189,39 @@
     #define SENSOR_ENERGY_UNITS         ENERGY_KWH
     #define SENSOR_POWER_UNITS          POWER_WATTS
 
+// -----------------------------------------------------------------------------
+// LSC Smart LED Light Strip (Smart CXonnect Series) available ACTION (Germany)
+// https://www.action.com/de-de/p/lsc-smart-connect-intelligenter-multicolor-led-strip-/
+// Reflashing from original Tuya firmware
+// to thirdparty firmware like espurna by:
+// https://github.com/ct-Open-Source/tuya-convert
+// -----------------------------------------------------------------------------
+
+#elif defined(LSC_SMART_LED_LIGHT_STRIP)
+    // Info
+    #define MANUFACTURER        "LSC"
+    #define DEVICE              "SMART_LED_LIGHT_STRIP"
+    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
+    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER
+    #define DUMMY_RELAY_COUNT   1
+
+    // Light RGBW
+    #define LIGHT_CHANNELS      4
+    #define LIGHT_CH1_PIN       4       // RED
+    #define LIGHT_CH2_PIN       12      // GREEN
+    #define LIGHT_CH3_PIN       14      // BLUE
+    #define LIGHT_CH4_PIN       13      // WHITE
+    // #define LIGHT_CH5_PIN    5       // CW (not connected, but circuit supports it)
+    #define LIGHT_CH1_INVERSE   0
+    #define LIGHT_CH2_INVERSE   0
+    #define LIGHT_CH3_INVERSE   0
+    #define LIGHT_CH4_INVERSE   0
+
+    // IR
+    #define IR_SUPPORT          1
+    #define IR_RX_PIN           0
+    #define IR_BUTTON_SET       5
+
 // -----------------------------------------------------------------------------
 // eHomeDIY WT02
 // https://github.com/eHomeDIY/WT02-hardware
diff --git a/code/platformio.ini b/code/platformio.ini
index a6cd4e23..7fee9915 100644
--- a/code/platformio.ini
+++ b/code/platformio.ini
@@ -1703,6 +1703,14 @@ build_flags = ${common.build_flags_1m0m} -DHYKKER_SMART_HOME_POWER_PLUG
 upload_port = ${common.ota_upload_port}
 upload_flags = ${common.ota_upload_flags}
 
+[env:lsc-smart-led-light-strip]
+board = ${common.board_1m}
+build_flags = ${common.build_flags_1m0m} -DLSC_SMART_LED_LIGHT_STRIP
+
+[env:lsc-smart-led-light-strip-ota]
+board = ${common.board_1m}
+build_flags = ${common.build_flags_1m0m} -DLSC_SMART_LED_LIGHT_STRIP
+
 [env:linksprite-linknode-r4]
 board = ${common.board_4m}
 build_flags = ${common.build_flags_4m1m} -DLINKSPRITE_LINKNODE_R4