diff --git a/code/devices/005_itead_sonoff_th.json b/code/devices/005_itead_sonoff_th.json index 832e649e..1df300dc 100644 --- a/code/devices/005_itead_sonoff_th.json +++ b/code/devices/005_itead_sonoff_th.json @@ -4,6 +4,8 @@ "btnMode0": 2, "btnRelay0": 0, "device": "ITEAD_SONOFF_TH", + "dhtGPIO0": 14, + "dsGPIO0": 14, "ledGPIO0": 13, "ledLogic0": 1, "rlyGPIO0": 12, diff --git a/code/devices/009_itead_sonoff_dual.json b/code/devices/009_itead_sonoff_dual.json index 48312eb7..23bb6dc3 100644 --- a/code/devices/009_itead_sonoff_dual.json +++ b/code/devices/009_itead_sonoff_dual.json @@ -6,6 +6,6 @@ "device": "ITEAD_SONOFF_DUAL", "ledGPIO0": 13, "ledLogic0": 1, - "rlyCount": 2, + "rlyDummy": 2, "rlyProvider": 1 } diff --git a/code/devices/020_aithinker_ai_light.json b/code/devices/020_aithinker_ai_light.json index db7c93d5..83e494eb 100644 --- a/code/devices/020_aithinker_ai_light.json +++ b/code/devices/020_aithinker_ai_light.json @@ -7,6 +7,6 @@ "myDIGPIO": 13, "myMapping": "0123", "myModel": 0, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/021_magichome_led_controller.json b/code/devices/021_magichome_led_controller.json index 9c36cc56..f705e6f4 100644 --- a/code/devices/021_magichome_led_controller.json +++ b/code/devices/021_magichome_led_controller.json @@ -15,6 +15,6 @@ "litChLogic2": 0, "litChLogic3": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/024_huacanxing_h801.json b/code/devices/024_huacanxing_h801.json index e45f04d5..bfdebf2e 100644 --- a/code/devices/024_huacanxing_h801.json +++ b/code/devices/024_huacanxing_h801.json @@ -16,6 +16,6 @@ "litChLogic3": 0, "litChLogic4": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/025_itead_bnsz01.json b/code/devices/025_itead_bnsz01.json index a05ac41a..0f07678a 100644 --- a/code/devices/025_itead_bnsz01.json +++ b/code/devices/025_itead_bnsz01.json @@ -6,6 +6,6 @@ "litChGPIO0": 12, "litChLogic0": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/026_itead_sonoff_rfbridge.json b/code/devices/026_itead_sonoff_rfbridge.json index 4eac878b..66326e78 100644 --- a/code/devices/026_itead_sonoff_rfbridge.json +++ b/code/devices/026_itead_sonoff_rfbridge.json @@ -10,6 +10,6 @@ "rfbDirect": 0, "rfbRXGPIO": 4, "rfbTXGPIO": 5, - "rlyCount": 8, + "rlyDummy": 8, "rlyProvider": 3 } \ No newline at end of file diff --git a/code/devices/028_itead_sonoff_b1.json b/code/devices/028_itead_sonoff_b1.json index 6d3c61fc..90876c0b 100644 --- a/code/devices/028_itead_sonoff_b1.json +++ b/code/devices/028_itead_sonoff_b1.json @@ -9,6 +9,6 @@ "myDIGPIO": 12, "myMapping": "43501", "myModel": 1, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/029_itead_sonoff_led.json b/code/devices/029_itead_sonoff_led.json index 9d6d5392..c9056e79 100644 --- a/code/devices/029_itead_sonoff_led.json +++ b/code/devices/029_itead_sonoff_led.json @@ -8,6 +8,6 @@ "litChLogic0": 0, "litChLogic1": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/036_huacanxing_h802.json b/code/devices/036_huacanxing_h802.json index 9599365f..41c14c74 100644 --- a/code/devices/036_huacanxing_h802.json +++ b/code/devices/036_huacanxing_h802.json @@ -12,6 +12,6 @@ "litChLogic2": 0, "litChLogic3": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/041_intermittech_quinled.json b/code/devices/041_intermittech_quinled.json index b8a22743..427999fb 100644 --- a/code/devices/041_intermittech_quinled.json +++ b/code/devices/041_intermittech_quinled.json @@ -8,6 +8,6 @@ "litChLogic0": 0, "litChLogic1": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/042_magichome_led_controller_20.json b/code/devices/042_magichome_led_controller_20.json index 2aaa14cc..328c7a7a 100644 --- a/code/devices/042_magichome_led_controller_20.json +++ b/code/devices/042_magichome_led_controller_20.json @@ -15,6 +15,6 @@ "litChLogic2": 0, "litChLogic3": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/043_arilux_al_lc06.json b/code/devices/043_arilux_al_lc06.json index 09cdad95..28967117 100644 --- a/code/devices/043_arilux_al_lc06.json +++ b/code/devices/043_arilux_al_lc06.json @@ -12,6 +12,6 @@ "litChLogic3": 0, "litChLogic4": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/045_authometion_lyt8266.json b/code/devices/045_authometion_lyt8266.json index 44f07658..cd2bc46e 100644 --- a/code/devices/045_authometion_lyt8266.json +++ b/code/devices/045_authometion_lyt8266.json @@ -12,6 +12,6 @@ "litEnableGPIO": 15, "litEnableLogic": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/046_arilux_e27.json b/code/devices/046_arilux_e27.json index 158a0910..51c45cca 100644 --- a/code/devices/046_arilux_e27.json +++ b/code/devices/046_arilux_e27.json @@ -7,6 +7,6 @@ "myDIGPIO": 13, "myMapping": "0123", "myModel": 0, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/050_arilux_al_lc01.json b/code/devices/050_arilux_al_lc01.json index c550afab..07137348 100644 --- a/code/devices/050_arilux_al_lc01.json +++ b/code/devices/050_arilux_al_lc01.json @@ -8,6 +8,6 @@ "litChLogic1": 0, "litChLogic2": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/051_arilux_al_lc11.json b/code/devices/051_arilux_al_lc11.json index fa21361f..47ffc227 100644 --- a/code/devices/051_arilux_al_lc11.json +++ b/code/devices/051_arilux_al_lc11.json @@ -12,6 +12,6 @@ "litChLogic3": 0, "litChLogic4": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/052_arilux_al_lc02.json b/code/devices/052_arilux_al_lc02.json index ea47c31c..b45ab586 100644 --- a/code/devices/052_arilux_al_lc02.json +++ b/code/devices/052_arilux_al_lc02.json @@ -10,6 +10,6 @@ "litChLogic2": 0, "litChLogic3": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/054_gizwits_witty_cloud.json b/code/devices/054_gizwits_witty_cloud.json index 9dfe1bba..e7e79855 100644 --- a/code/devices/054_gizwits_witty_cloud.json +++ b/code/devices/054_gizwits_witty_cloud.json @@ -18,6 +18,6 @@ "litChLogic1": 0, "litChLogic2": 0, "litProvider": 2, - "rlyCount": 1, + "rlyDummy": 1, "rlyProvider": 2 } \ No newline at end of file diff --git a/code/devices/082_stm_relay.json b/code/devices/082_stm_relay.json index cb80ef3a..67d35613 100644 --- a/code/devices/082_stm_relay.json +++ b/code/devices/082_stm_relay.json @@ -2,6 +2,6 @@ "board": 82, "dbgSerial": 0, "device": "STM_RELAY", - "rlyCount": 2, + "rlyDummy": 2, "rlyProvider": 4 } \ No newline at end of file diff --git a/code/espurna/button.ino b/code/espurna/button.ino index bea00dc2..6b09ac07 100644 --- a/code/espurna/button.ino +++ b/code/espurna/button.ino @@ -185,7 +185,7 @@ void _buttonConfigure() { #endif - DEBUG_MSG_P(PSTR("[BUTTON] Number of buttons: %u\n"), _buttons.size()); + DEBUG_MSG_P(PSTR("[BUTTON] Buttons: %u\n"), _buttons.size()); } diff --git a/code/espurna/config/defaults.h b/code/espurna/config/defaults.h index 96bc7047..43b9c4ad 100644 --- a/code/espurna/config/defaults.h +++ b/code/espurna/config/defaults.h @@ -212,10 +212,6 @@ // Relays // ----------------------------------------------------------------------------- -#ifndef DUMMY_RELAY_COUNT -#define DUMMY_RELAY_COUNT 0 -#endif - #ifndef RELAY1_PIN #define RELAY1_PIN GPIO_NONE #endif diff --git a/code/espurna/espurna.ino b/code/espurna/espurna.ino index 0b10a7a5..dba72f83 100644 --- a/code/espurna/espurna.ino +++ b/code/espurna/espurna.ino @@ -59,8 +59,7 @@ void setup() { settingsSetup(); // Load board data - loadBoard(); - migrate(); + hardwareSetup(); // Show welcome message and system configuration info(); @@ -169,15 +168,11 @@ void setup() { uartmqttSetup(); #endif - // 3rd party code hook #if USE_EXTRA extraSetup(); #endif - // Prepare configuration for version 2.0 - migrate(); - saveSettings(); } diff --git a/code/espurna/hardware.ino b/code/espurna/hardware.ino new file mode 100644 index 00000000..c17056e3 --- /dev/null +++ b/code/espurna/hardware.ino @@ -0,0 +1,1822 @@ +/* + +HARDWARE MODULE + +Copyright (C) 2016-2018 by Xose Pérez + +*/ + +void _hardwareMigrateMoveIndexDown(const char * key, int offset = 0) { + if (hasSetting(key, 0)) return; + for (unsigned char index = 1; index < SETTINGS_MAX_LIST_COUNT; index++) { + if (hasSetting(key, index)) { + setSetting(key, index - 1, getSetting(key, index).toInt() + offset); + } else { + delSetting(key, index - 1); + } + } +} + +// Configuration versions +// +// 1: based on Embedis, no board definitions +// 2: based on Embedis, with board definitions 1-based +// 3: based on Embedis, with board definitions 0-based +// 4: based on Embedis, added sensors and force resetting + +void _hardwareMigrate() { + + moveSetting("boardName", "device"); + moveSettings("relayGPIO", "rlyGPIO"); + moveSettings("relayResetGPIO", "rlyResetGPIO"); + moveSettings("relayType", "rlyType"); + moveSetting("selGPIO", "hlwSELGPIO"); + moveSetting("cfGPIO", "hlwCFGPIO"); + moveSetting("cf1GPIO", "hlwCF1GPIO"); + moveSetting("relayProvider", "rlyProvider"); + moveSetting("lightProvider", "litProvider"); + moveSetting("relays", "rlyDummy"); + moveSettings("chGPIO", "litChGPIO"); + moveSettings("chLogic", "litChLogic"); + moveSetting("enGPIO", "litEnableGPIO"); + moveSetting("hlwSelC", "hlwCurLevel"); + moveSetting("hlwIntM", "hlwInt"); + delSetting("ledWifi"); + + // Get config version + unsigned int board = getSetting("board", 0).toInt(); + unsigned int config_version = getSetting("cfg", board > 0 ? 2 : 1).toInt(); + setSetting("cfg", CFG_VERSION); + + if (config_version == 2) { + _hardwareMigrateMoveIndexDown("ledGPIO"); + _hardwareMigrateMoveIndexDown("ledLogic"); + _hardwareMigrateMoveIndexDown("btnGPIO"); + _hardwareMigrateMoveIndexDown("btnRelay", -1); + _hardwareMigrateMoveIndexDown("rlyGPIO"); + _hardwareMigrateMoveIndexDown("rlyType"); + } + +} + +/* +void _hardwareLoad() { + #ifndef ESPURNA_CORE + char buffer[device_config_len+1]; + strncpy_P(buffer, (const char *) device_config, device_config_len); + buffer[device_config_len] = 0; + DynamicJsonBuffer jsonBuffer; + JsonObject& json = jsonBuffer.parseObject(buffer); + json["app"] = APP_NAME; + settingsRestoreJson(json); + #endif +} +*/ + +void _hardwareLoad() { + + // ------------------------------------------------------------------------- + // Board definitions + // ------------------------------------------------------------------------- + + #if defined(NODEMCU_LOLIN) + + setSetting("board", 2); + setSetting("device", "NODEMCU_LOLIN"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(WEMOS_D1_MINI_RELAYSHIELD) + + setSetting("board", 3); + setSetting("device", "WEMOS_D1_MINI_RELAYSHIELD"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 5); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_BASIC) + + setSetting("board", 4); + setSetting("device", "ITEAD_SONOFF_BASIC"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_TH) + + setSetting("board", 5); + setSetting("device", "ITEAD_SONOFF_TH"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("dsGPIO", 0, 14); + setSetting("dhtGPIO", 0, 14); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_SV) + + setSetting("board", 6); + setSetting("device", "ITEAD_SONOFF_SV"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_TOUCH) + + setSetting("board", 7); + setSetting("device", "ITEAD_SONOFF_TOUCH"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnPress", 0, BUTTON_MODE_TOGGLE); + setSetting("btnClick", 0, BUTTON_MODE_NONE); + setSetting("btnDblClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_POW) + + setSetting("board", 8); + setSetting("device", "ITEAD_SONOFF_POW"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 15); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + setSetting("hlwEnabled", 1); + setSetting("hlwSELGPIO", 5); + setSetting("hlwCF1GPIO", 13); + setSetting("hlwCFGPIO", 14); + + #elif defined(ITEAD_SONOFF_DUAL) + + setSetting("board", 9); + setSetting("device", "ITEAD_SONOFF_DUAL"); + + setSetting("btnRelay", 0, GPIO_INVALID); + setSetting("btnRelay", 1, GPIO_INVALID); + setSetting("btnRelay", 2, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyProvider", RELAY_PROVIDER_DUAL); + setSetting("rlyDummy", 2); + + setSetting("dbgSerial", 0); + setSetting("dbgBaudrate", 19230); + + #elif defined(ITEAD_1CH_INCHING) + + // The inching functionality is managed by a misterious IC in the board. + // You cannot control the inching button and functionality from the ESP8266 + // Besides, enabling the inching functionality using the hardware button + // will result in the relay switching on and off continuously. + // Fortunately the unkown IC keeps memory of the hardware inching status + // so you can just disable it and forget. The inching LED must be lit. + // You can still use the pulse options from the web interface + // without problem. + + setSetting("board", 10); + setSetting("device", "ITEAD_1CH_INCHING"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_4CH) + + setSetting("board", 11); + setSetting("device", "ITEAD_SONOFF_4CH"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnGPIO", 1, 9); + setSetting("btnGPIO", 2, 10); + setSetting("btnGPIO", 3, 14); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 3, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + setSetting("btnRelay", 2, 2); + setSetting("btnRelay", 3, 3); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyGPIO", 1, 5); + setSetting("rlyGPIO", 2, 4); + setSetting("rlyGPIO", 3, 15); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + setSetting("rlyType", 2, RELAY_TYPE_NORMAL); + setSetting("rlyType", 3, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SLAMPHER) + + setSetting("board", 12); + setSetting("device", "ITEAD_SLAMPHER"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_S20) + + setSetting("board", 13); + setSetting("device", "ITEAD_S20"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(ELECTRODRAGON_WIFI_IOT) + + setSetting("board", 14); + setSetting("device", "ELECTRODRAGON_WIFI_IOT"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnGPIO", 1, 2); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + + setSetting("ledGPIO", 0, 16); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyGPIO", 1, 13); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + + #elif defined(WORKCHOICE_ECOPLUG) + + setSetting("board", 15); + setSetting("device", "WORKCHOICE_ECOPLUG"); + + setSetting("btnGPIO", 0, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 15); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(JANGOE_WIFI_RELAY_NC) + + // Jan Goedeke Wifi Relay + // https://github.com/JanGoe/esp8266-wifi-relay + + setSetting("board", 16); + setSetting("device", "JANGOE_WIFI_RELAY_NC"); + + setSetting("btnGPIO", 0, 12); + setSetting("btnGPIO", 1, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + + setSetting("rlyGPIO", 0, 2); + setSetting("rlyGPIO", 1, 14); + setSetting("rlyType", 0, RELAY_TYPE_INVERSE); + setSetting("rlyType", 1, RELAY_TYPE_INVERSE); + + #elif defined(JANGOE_WIFI_RELAY_NO) + + setSetting("board", 17); + setSetting("device", "JANGOE_WIFI_RELAY_NO"); + + setSetting("btnGPIO", 0, 12); + setSetting("btnGPIO", 1, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + + setSetting("rlyGPIO", 0, 2); + setSetting("rlyGPIO", 1, 14); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + + #elif defined(OPENENERGYMONITOR_MQTT_RELAY) + + setSetting("board", 18); + setSetting("device", "OPENENERGYMONITOR_MQTT_RELAY"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 16); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(JORGEGARCIA_WIFI_RELAYS) + + // Jorge García Wifi+Relays Board Kit + // https://www.tindie.com/products/jorgegarciadev/wifi--relays-board-kit + // https://github.com/jorgegarciadev/wifikit + + setSetting("board", 19); + setSetting("device", "JORGEGARCIA_WIFI_RELAYS"); + + setSetting("rlyGPIO", 0, 0); + setSetting("rlyGPIO", 1, 2); + setSetting("rlyType", 0, RELAY_TYPE_INVERSE); + setSetting("rlyType", 1, RELAY_TYPE_INVERSE); + + #elif defined(AITHINKER_AI_LIGHT) + + setSetting("board", 20); + setSetting("device", "AITHINKER_AI_LIGHT"); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("litProvider", LIGHT_PROVIDER_MY92XX); + + setSetting("myModel", MY92XX_MODEL_MY9291); // 4 channels per chip + setSetting("myChips", 1); + setSetting("myDIGPIO", 13); + setSetting("myDCKIGPIO", 15); + setSetting("myMapping", "0123"); + + #elif defined(MAGICHOME_LED_CONTROLLER) + + setSetting("board", 21); + setSetting("device", "MAGICHOME_LED_CONTROLLER"); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("irEnabled", 1); + setSetting("irGPIO", 4); + setSetting("irSet", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 14); + setSetting("litChGPIO", 1, 5); + setSetting("litChGPIO", 2, 12); + setSetting("litChGPIO", 3, 13); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT); + + #elif defined(ITEAD_MOTOR) + + setSetting("board", 22); + setSetting("device", "ITEAD_MOTOR"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(TINKERMAN_ESPURNA_H06) + + setSetting("board", 23); + setSetting("device", "TINKERMAN_ESPURNA_H06"); + + setSetting("btnGPIO", 0, 4); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 5); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_INVERSE); + + setSetting("hlwEnabled", 1); + setSetting("hlwSELGPIO", 2); + setSetting("hlwCF1GPIO", 13); + setSetting("hlwCFGPIO", 14); + + #elif defined(HUACANXING_H801) + + setSetting("board", 24); + setSetting("device", "HUACANXING_H801"); + + setSetting("ledGPIO", 0, 5); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("dbgPort", 1); + setSetting("dbgRXEnabled", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 15); + setSetting("litChGPIO", 1, 13); + setSetting("litChGPIO", 2, 12); + setSetting("litChGPIO", 3, 14); + setSetting("litChGPIO", 4, 4); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 4, GPIO_LOGIC_DIRECT); + + #elif defined(ITEAD_BNSZ01) + + setSetting("board", 25); + setSetting("device", "ITEAD_BNSZ01"); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 12); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + + #elif defined(ITEAD_SONOFF_RFBRIDGE) + + setSetting("board", 26); + setSetting("device", "ITEAD_SONOFF_RFBRIDGE"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyProvider", RELAY_PROVIDER_RFBRIDGE); + setSetting("rlyDummy", 8); + + // When using un-modified harware, ESPurna communicates with the secondary + // MCU EFM8BB1 via UART at 19200 bps so we need to change the speed of + // the port and remove UART noise on serial line + setSetting("dbgSerial", 0); + setSetting("dbgBaudrate", 19200); + + setSetting("rfbDirect", 0); + setSetting("rfbRXGPIO", 4); + setSetting("rfbTXGPIO", 5); + + #elif defined(ITEAD_SONOFF_4CH_PRO) + + setSetting("board", 27); + setSetting("device", "ITEAD_SONOFF_4CH_PRO"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnGPIO", 1, 9); + setSetting("btnGPIO", 2, 10); + setSetting("btnGPIO", 3, 14); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 3, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + setSetting("btnRelay", 2, 2); + setSetting("btnRelay", 3, 3); + + // Sonoff 4CH Pro uses a secondary STM32 microcontroller to handle + // buttons and relays, but it also forwards button presses to the ESP8285. + // This allows ESPurna to handle button presses -almost- the same way + // as with other devices except: + // * Double click seems to break/disable the button on the STM32 side + // * With S6 switch to 1 (self-locking and inching modes) everything's OK + // * With S6 switch to 0 (interlock mode) if there is a relay ON + // and you click on another relay button, the STM32 sends a "press" + // event for the button of the first relay (to turn it OFF) but it + // does not send a "release" event. It's like it's holding the + // button down since you can see it is still LOW. + // Whatever reason the result is that it may actually perform a + // long click or long-long click. + // The configuration below make the button toggle the relay on press events + // and disables any possibly harmful combination with S6 set to 0. + // If you are sure you will only use S6 to 1 you can comment the + // btnLngClick(0) and btnLngLngClick(0) options below to recover the + // reset mode and factory reset functionalities, or link other actions like + // AP mode in the commented line below. + setSetting("btnPress", 0, BUTTON_MODE_TOGGLE); + setSetting("btnClick", 0, BUTTON_MODE_NONE); + setSetting("btnDblClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngClick", 0, BUTTON_MODE_NONE); // or BUTTON_MODE_AP + setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE); // or BUTTON_MODE_FACTORY + setSetting("btnPress", 1, BUTTON_MODE_TOGGLE); + setSetting("btnClick", 1, BUTTON_MODE_NONE); + setSetting("btnPress", 2, BUTTON_MODE_TOGGLE); + setSetting("btnClick", 2, BUTTON_MODE_NONE); + setSetting("btnPress", 3, BUTTON_MODE_TOGGLE); + setSetting("btnClick", 3, BUTTON_MODE_NONE); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyGPIO", 1, 5); + setSetting("rlyGPIO", 2, 4); + setSetting("rlyGPIO", 3, 15); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + setSetting("rlyType", 2, RELAY_TYPE_NORMAL); + setSetting("rlyType", 3, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_B1) + + setSetting("board", 28); + setSetting("device", "ITEAD_SONOFF_B1"); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("litProvider", LIGHT_PROVIDER_MY92XX); + setSetting("litChFactor", 4, 0.1); // White LEDs are way more bright in the B1 + setSetting("litChFactor", 5, 0.1); // White LEDs are way more bright in the B1 + + setSetting("myModel", MY92XX_MODEL_MY9231); // 3 channels per chip + setSetting("myChips", 2); + setSetting("myDIGPIO", 12); + setSetting("myDCKIGPIO", 14); + setSetting("myMapping", "43501"); // TODO + + #elif defined(ITEAD_SONOFF_LED) + + setSetting("board", 29); + setSetting("device", "ITEAD_SONOFF_LED"); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 12); // Cold white + setSetting("litChGPIO", 1, 14); // Warm white + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + + #elif defined(ITEAD_SONOFF_T1_1CH) + + setSetting("board", 30); + setSetting("device", "ITEAD_SONOFF_T1_1CH"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("btnPress", 0, BUTTON_MODE_TOGGLE); + setSetting("btnClick", 0, BUTTON_MODE_NONE); + setSetting("btnDblClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_T1_2CH) + + setSetting("board", 31); + setSetting("device", "ITEAD_SONOFF_T1_2CH"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnGPIO", 1, 9); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + + setSetting("btnPress", 0, BUTTON_MODE_TOGGLE); + setSetting("btnPress", 1, BUTTON_MODE_TOGGLE); + setSetting("btnClick", 0, BUTTON_MODE_NONE); + setSetting("btnClick", 1, BUTTON_MODE_NONE); + setSetting("btnDblClick", 0, BUTTON_MODE_NONE); + setSetting("btnDblClick", 1, BUTTON_MODE_NONE); + setSetting("btnLngClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngClick", 1, BUTTON_MODE_NONE); + setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET); + setSetting("btnLngLngClick", 1, BUTTON_MODE_RESET); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyGPIO", 1, 5); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_T1_3CH) + + setSetting("board", 32); + setSetting("device", "ITEAD_SONOFF_T1_3CH"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnGPIO", 1, 9); + setSetting("btnGPIO", 2, 10); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + setSetting("btnRelay", 2, 2); + + setSetting("btnPress", 0, BUTTON_MODE_TOGGLE); + setSetting("btnPress", 1, BUTTON_MODE_TOGGLE); + setSetting("btnPress", 2, BUTTON_MODE_TOGGLE); + setSetting("btnClick", 0, BUTTON_MODE_NONE); + setSetting("btnClick", 1, BUTTON_MODE_NONE); + setSetting("btnClick", 2, BUTTON_MODE_NONE); + setSetting("btnDblClick", 0, BUTTON_MODE_NONE); + setSetting("btnDblClick", 1, BUTTON_MODE_NONE); + setSetting("btnDblClick", 2, BUTTON_MODE_NONE); + setSetting("btnLngClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngClick", 1, BUTTON_MODE_NONE); + setSetting("btnLngClick", 2, BUTTON_MODE_NONE); + setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET); + setSetting("btnLngLngClick", 1, BUTTON_MODE_RESET); + setSetting("btnLngLngClick", 2, BUTTON_MODE_RESET); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyGPIO", 1, 5); + setSetting("rlyGPIO", 2, 4); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + setSetting("rlyType", 2, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_RF) + + setSetting("board", 33); + setSetting("device", "ITEAD_SONOFF_RF"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(WION_50055) + + // WiOn 50055 Indoor Wi-Fi Wall Outlet & Tap + // https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50050-Indoor-Wi-Fi-Outlet-Wireless-Switch-Programmable-Timer-%2F263112281551 + // https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50055-Indoor-Wi-Fi-Wall-Tap-Monitor-Energy-Usage-Wireless-Smart-Switch-%2F263020837777 + // Does not support power monitoring yet + + setSetting("board", 34); + setSetting("device", "WION_50055"); + + setSetting("btnGPIO", 0, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 15); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(EXS_WIFI_RELAY_V31) + + // EX-Store Wifi Relay v3.1 + // https://ex-store.de/ESP8266-WiFi-Relay-V31 + + setSetting("board", 35); + setSetting("device", "EXS_WIFI_RELAY_V31"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("rlyGPIO", 0, 13); + setSetting("rlyResetGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_LATCHED); + + #elif defined(HUACANXING_H802) + + setSetting("board", 36); + setSetting("device", "HUACANXING_H802"); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("dbgPort", 1); + setSetting("dbgRXEnabled", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 12); + setSetting("litChGPIO", 1, 14); + setSetting("litChGPIO", 2, 13); + setSetting("litChGPIO", 3, 15); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT); + + #elif defined(GENERIC_V9261F) + + setSetting("board", 37); + setSetting("device", "GENERIC_V9261F"); + + setSetting("v92Enabled", 1); + setSetting("v92GPIO", 2); + setSetting("v92Logic", GPIO_LOGIC_INVERSE); + + #elif defined(GENERIC_ECH1560) + + setSetting("board", 38); + setSetting("device", "GENERIC_ECH1560"); + + setSetting("echEnabled", 1); + setSetting("echCLKGPIO", 4); + setSetting("echMISOGPIO", 5); + setSetting("echLogic", GPIO_LOGIC_INVERSE); + + #elif defined(TINKERMAN_ESPURNA_H08) + + setSetting("board", 39); + setSetting("device", "TINKERMAN_ESPURNA_H08"); + + setSetting("btnGPIO", 0, 4); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + setSetting("hlwEnabled", 1); + setSetting("hlwSELGPIO", 5); + setSetting("hlwCF1GPIO", 13); + setSetting("hlwCFGPIO", 14); + + #elif defined(MANCAVEMADE_ESPLIVE) + + // ESPLive + // https://github.com/ManCaveMade/ESP-Live + + setSetting("board", 40); + setSetting("device", "MANCAVEMADE_ESPLIVE"); + + setSetting("btnGPIO", 0, 4); + setSetting("btnGPIO", 1, 5); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyGPIO", 1, 13); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + + setSetting("dsEnabled", 1); + setSetting("dsGPIO", 0, 2); + + #elif defined(INTERMITTECH_QUINLED) + + // QuinLED + // http://blog.quindorian.org/2017/02/esp8266-led-lighting-quinled-v2-6-pcb.html + + setSetting("board", 41); + setSetting("device", "INTERMITTECH_QUINLED"); + + setSetting("ledGPIO", 0, 5); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 0); + setSetting("litChGPIO", 1, 2); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + + #elif defined(MAGICHOME_LED_CONTROLLER_20) + + setSetting("board", 42); + setSetting("device", "MAGICHOME_LED_CONTROLLER_20"); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("irEnabled", 1); + setSetting("irGPIO", 4); + setSetting("irSet", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 5); + setSetting("litChGPIO", 1, 12); + setSetting("litChGPIO", 2, 13); + setSetting("litChGPIO", 3, 15); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT); + + #elif defined(ARILUX_AL_LC06) + + setSetting("board", 43); + setSetting("device", "ARILUX_AL_LC06"); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 14); + setSetting("litChGPIO", 1, 12); + setSetting("litChGPIO", 2, 13); + setSetting("litChGPIO", 3, 15); + setSetting("litChGPIO", 4, 5); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 4, GPIO_LOGIC_DIRECT); + + #elif defined(XENON_SM_PW702U) + + setSetting("board", 44); + setSetting("device", "XENON_SM_PW702U"); + + setSetting("btnGPIO", 0, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 4); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(AUTHOMETION_LYT8266) + + // AUTHOMETION LYT8266 + // https://authometion.com/shop/en/home/13-lyt8266.html + + setSetting("board", 45); + setSetting("device", "AUTHOMETION_LYT8266"); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 13); + setSetting("litChGPIO", 1, 12); + setSetting("litChGPIO", 2, 14); + setSetting("litChGPIO", 3, 2); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT); + setSetting("litEnableGPIO", 15); + setSetting("litEnableLogic", GPIO_LOGIC_DIRECT); + + #elif defined(ARILUX_E27) + + setSetting("board", 46); + setSetting("device", "ARILUX_E27"); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("litProvider", LIGHT_PROVIDER_MY92XX); + + setSetting("myModel", MY92XX_MODEL_MY9291); // 4 channels per chip + setSetting("myChips", 1); + setSetting("myDIGPIO", 13); + setSetting("myDCKIGPIO", 15); + setSetting("myMapping", "0123"); + + #elif defined(YJZK_SWITCH_2CH) + + setSetting("board", 47); + setSetting("device", "YJZK_SWITCH_2CH"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnGPIO", 1, 9); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyGPIO", 1, 5); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_DUAL_R2) + + setSetting("board", 48); + setSetting("device", "ITEAD_SONOFF_DUAL_R2"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("btnGPIO", 1, 9); + setSetting("btnGPIO", 2, 10); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 1, 1); + setSetting("btnRelay", 2, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyGPIO", 1, 5); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + + #elif defined(GENERIC_8CH) + + setSetting("board", 49); + setSetting("device", "GENERIC_8CH"); + + setSetting("rlyGPIO", 0, 0); + setSetting("rlyGPIO", 1, 2); + setSetting("rlyGPIO", 2, 4); + setSetting("rlyGPIO", 3, 5); + setSetting("rlyGPIO", 4, 12); + setSetting("rlyGPIO", 5, 13); + setSetting("rlyGPIO", 6, 14); + setSetting("rlyGPIO", 7, 15); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + setSetting("rlyType", 2, RELAY_TYPE_NORMAL); + setSetting("rlyType", 3, RELAY_TYPE_NORMAL); + setSetting("rlyType", 4, RELAY_TYPE_NORMAL); + setSetting("rlyType", 5, RELAY_TYPE_NORMAL); + setSetting("rlyType", 6, RELAY_TYPE_NORMAL); + setSetting("rlyType", 7, RELAY_TYPE_NORMAL); + + #elif defined(ARILUX_AL_LC01) + + setSetting("board", 50); + setSetting("device", "ARILUX_AL_LC01"); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 5); + setSetting("litChGPIO", 1, 12); + setSetting("litChGPIO", 2, 13); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT); + + #elif defined(ARILUX_AL_LC11) + + setSetting("board", 51); + setSetting("device", "ARILUX_AL_LC11"); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 5); + setSetting("litChGPIO", 1, 4); + setSetting("litChGPIO", 2, 14); + setSetting("litChGPIO", 3, 13); + setSetting("litChGPIO", 4, 12); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 4, GPIO_LOGIC_DIRECT); + + #elif defined(ARILUX_AL_LC02) + + setSetting("board", 52); + setSetting("device", "ARILUX_AL_LC02"); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 12); + setSetting("litChGPIO", 1, 5); + setSetting("litChGPIO", 2, 13); + setSetting("litChGPIO", 3, 15); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT); + + #elif defined(KMC_70011) + + // KMC 70011 + // https://www.amazon.com/KMC-Monitoring-Required-Control-Compatible/dp/B07313TH7B + + setSetting("board", 53); + setSetting("device", "KMC_70011"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 14); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + setSetting("hlwEnabled", 1); + setSetting("hlwSELGPIO", 12); + setSetting("hlwCF1GPIO", 5); + setSetting("hlwCFGPIO", 4); + setSetting("hlwVolResUp", 2000000); + + #elif defined(GIZWITS_WITTY_CLOUD) + + setSetting("board", 54); + setSetting("device", "GIZWITS_WITTY_CLOUD"); + + setSetting("btnGPIO", 0, 4); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnPress", 0, BUTTON_MODE_TOGGLE); + setSetting("btnClick", 0, BUTTON_MODE_NONE); + setSetting("btnDblClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyProvider", RELAY_PROVIDER_LIGHT); + setSetting("rlyDummy", 1); + + setSetting("anaEnabled", 1); + + setSetting("litProvider", LIGHT_PROVIDER_DIMMER); + setSetting("litChGPIO", 0, 15); + setSetting("litChGPIO", 1, 12); + setSetting("litChGPIO", 2, 13); + setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT); + setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT); + + #elif defined(EUROMATE_WIFI_STECKER_SCHUKO) + + // Euromate (?) Wifi Stecker Shuko + // https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko/p/2291706 + // Thanks to @Geitde + + // The relay in the device is not a bistable (latched) relay. + // The device is reported to have a flip-flop circuit to drive the relay + // So @Geitde hack is still the only possible + // Hack: drive GPIO12 low and use GPIO5 as normal relay pin: + + setSetting("board", 55); + setSetting("device", "EUROMATE_WIFI_STECKER_SCHUKO"); + + setSetting("btnGPIO", 0, 14); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 4); + setSetting("ledGPIO", 1, 12); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("ledLogic", 1, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 5); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(TONBUX_POWERSTRIP02) + + setSetting("board", 56); + setSetting("device", "TONBUX_POWERSTRIP02"); + + setSetting("btnGPIO", 0, 5); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 1); + + setSetting("ledGPIO", 0, 0); // 1 blue led + setSetting("ledGPIO", 1, 3); // 3 red leds + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 4); + setSetting("rlyGPIO", 1, 13); + setSetting("rlyGPIO", 2, 12); + setSetting("rlyGPIO", 3, 14); + setSetting("rlyGPIO", 4, 16); // Not a relay. USB ports on/off + setSetting("rlyType", 0, RELAY_TYPE_INVERSE); + setSetting("rlyType", 1, RELAY_TYPE_INVERSE); + setSetting("rlyType", 2, RELAY_TYPE_INVERSE); + setSetting("rlyType", 3, RELAY_TYPE_INVERSE); + setSetting("rlyType", 4, RELAY_TYPE_NORMAL); // Not a relay. USB ports on/off + + #elif defined(LINGAN_SWA1) + + setSetting("board", 57); + setSetting("device", "LINGAN_SWA1"); + + setSetting("btnGPIO", 0, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 4); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 5); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(HEYGO_HY02) + + setSetting("board", 58); + setSetting("device", "HEYGO_HY02"); + + setSetting("btnGPIO", 0, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 4); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(MAXCIO_WUS002S) + + setSetting("board", 59); + setSetting("device", "MAXCIO_WUS002S"); + + setSetting("btnGPIO", 0, 2); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 3); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 13); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + setSetting("hlwEnabled", 1); + setSetting("hlwSELGPIO", 12); + setSetting("hlwCF1GPIO", 5); + setSetting("hlwCFGPIO", 4); + setSetting("hlwCurRes", 0.002); + setSetting("hlwVolResUp", 2000000); + + #elif defined(YIDIAN_XSSSA05) + + setSetting("board", 60); + setSetting("device", "YIDIAN_XSSSA05"); + + setSetting("btnGPIO", 0, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 4); + setSetting("ledGPIO", 2, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("ledLogic", 2, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + setSetting("hlwEnabled", 1); + setSetting("hlwSELGPIO", 3); + setSetting("hlwCF1GPIO", 14); + setSetting("hlwCFGPIO", 5); + setSetting("hlwVolResUp", 2400000); + + #elif defined(TONBUX_XSSSA06) + + setSetting("board", 61); + setSetting("device", "TONBUX_XSSSA06"); + + setSetting("btnGPIO", 0, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 0); // Red + setSetting("ledGPIO", 0, 5); // Green + setSetting("ledGPIO", 0, 2); // Blue + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 15); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(GREEN_ESP8266RELAY) + + // GREEN ESP8266 RELAY MODULE + // https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180323113846&SearchText=Green+ESP8266 + + setSetting("board", 62); + setSetting("device", "GREEN_ESP8266RELAY"); + + setSetting("btnGPIO", 0, 5); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 4); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(IKE_ESPIKE) + + // Henrique Gravina ESPIKE + // https://github.com/Henriquegravina/Espike + + setSetting("board", 63); + setSetting("device", "IKE_ESPIKE"); + + setSetting("btnGPIO", 0, 13); + setSetting("btnGPIO", 1, 12); + setSetting("btnGPIO", 2, 14); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + setSetting("btnRelay", 2, 2); + setSetting("btnDblClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 4); + setSetting("rlyGPIO", 1, 5); + setSetting("rlyGPIO", 2, 16); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + setSetting("rlyType", 2, RELAY_TYPE_NORMAL); + + #elif defined(ARNIEX_SWIFITCH) + + // SWIFITCH + // https://github.com/ArnieX/swifitch + + setSetting("board", 64); + setSetting("device", "ARNIEX_SWIFITCH"); + + setSetting("btnGPIO", 0, 4); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP); + setSetting("btnRelay", 0, 1); + setSetting("btnPress", 0, BUTTON_MODE_NONE); + setSetting("btnClick", 0, BUTTON_MODE_TOGGLE); + setSetting("btnDblClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE); + + setSetting("ledGPIO", 0, 12); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 5); + setSetting("rlyType", 0, RELAY_TYPE_INVERSE); + + #elif defined(GENERIC_ESP01S_RELAY_V40) + + // ESP-01S RELAY v4.0 + // https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180404024035&SearchText=esp-01s+relay + + setSetting("board", 65); + setSetting("device", "GENERIC_ESP01S_RELAY_V40"); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 0); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(GENERIC_ESP01S_RGBLED_V10) + + // ESP-01S RGB LED v1.0 (some sold with ws2818) + // https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180404023816&SearchText=esp-01s+led+controller + + setSetting("board", 66); + setSetting("device", "GENERIC_ESP01S_RGBLED_V10"); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + #elif defined(HELTEC_TOUCHRELAY) + + // Heltec Touch Relay + // https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180408043114&SearchText=esp8266+touch+relay + + setSetting("board", 67); + setSetting("device", "HELTEC_TOUCHRELAY"); + + setSetting("btnGPIO", 0, 14); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 1); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(GENERIC_ESP01S_DHT11_V10) + + // ESP-01S DHT11 v1.0 + // https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180410105907&SearchText=esp-01s+dht11 + + setSetting("board", 68); + setSetting("device", "GENERIC_ESP01S_DHT11_V10"); + + setSetting("dhtEnabled", 1); + setSetting("dhtGPIO", 0, 2); + setSetting("dhtType", 0, DHT_CHIP_DHT11); + + #elif defined(GENERIC_ESP01S_DS18B20_V10) + + // ESP-01S DS18B20 v1.0 + // https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180410105933&SearchText=esp-01s+ds18b20 + + setSetting("board", 69); + setSetting("device", "GENERIC_ESP01S_DS18B20_V10"); + + setSetting("dsEnabled", 1); + setSetting("dsGPIO", 0, 2); + + #elif defined(ZHILDE_EU44_W) + + // Zhilde ZLD-EU44-W + // http://www.zhilde.com/product/60705150109-805652505/EU_WiFi_Surge_Protector_Extension_Socket_4_Outlets_works_with_Amazon_Echo_Smart_Power_Strip.html + + setSetting("board", 70); + setSetting("device", "ZHILDE_EU44_W"); + + setSetting("btnGPIO", 0, 3); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 1); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 5); + setSetting("rlyGPIO", 1, 4); + setSetting("rlyGPIO", 2, 12); + setSetting("rlyGPIO", 3, 13); + setSetting("rlyGPIO", 4, 14); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + setSetting("rlyType", 2, RELAY_TYPE_NORMAL); + setSetting("rlyType", 3, RELAY_TYPE_NORMAL); + setSetting("rlyType", 4, RELAY_TYPE_NORMAL); + + // Based on the reporter, this product uses GPIO1 and 3 for the button + // and onboard LED, so hardware serial should be disabled... + setSetting("dbgSerial", 0); + + #elif defined(ITEAD_SONOFF_POW_R2) + + setSetting("board", 71); + setSetting("device", "ITEAD_SONOFF_POW_R2"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + setSetting("cseEnabled", 1); + setSetting("cseGPIO", 1); + + setSetting("dbgSerial", 0); + + #elif defined(LUANI_HVIO) + + // Luani HVIO + // https://luani.de/projekte/esp8266-hvio/ + // https://luani.de/blog/esp8266-230v-io-modul/ + + setSetting("board", 72); + setSetting("device", "LUANI_HVIO"); + + setSetting("ledGPIO", 0, 15); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("btnGPIO", 0, 12); + setSetting("btnGPIO", 1, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + setSetting("btnDblClick", 0, BUTTON_MODE_NONE); + + setSetting("rlyGPIO", 0, 4); + setSetting("rlyGPIO", 1, 5); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + + #elif defined(ALLNET_4DUINO_IOT_WLAN_RELAIS) + + // Allnet 4duino ESP8266-UP-Relais + // http://www.allnet.de/de/allnet-brand/produkte/neuheiten/p/allnet-4duino-iot-wlan-relais-unterputz-esp8266-up-relais/ + // https://shop.allnet.de/fileadmin/transfer/products/148814.pdf + + setSetting("board", 73); + setSetting("device", "ALLNET_4DUINO_IOT_WLAN_RELAIS"); + + setSetting("ledGPIO", 0, 0); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 14); + setSetting("rlyResetGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_LATCHED); + + #elif defined(TONBUX_MOSQUITO_KILLER) + + // Tonbux 50-100M Smart Mosquito Killer USB + // https://www.aliexpress.com/item/Original-Tonbux-50-100M-Smart-Mosquito-Killer-USB-Plug-No-Noise-Repellent-App-Smart-Module/32859330820.html + + setSetting("board", 74); + setSetting("device", "TONBUX_MOSQUITO_KILLER"); + + setSetting("btnGPIO", 0, 2); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 15); + setSetting("ledGPIO", 1, 14); + setSetting("ledGPIO", 2, 12); + setSetting("ledGPIO", 3, 16); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE); + setSetting("ledLogic", 2, GPIO_LOGIC_DIRECT); + setSetting("ledLogic", 3, GPIO_LOGIC_DIRECT); + setSetting("ledMode", 0, LED_MODE_WIFI); + setSetting("ledMode", 1, LED_MODE_RELAY); + setSetting("ledRelay", 1, 0); + + setSetting("rlyGPIO", 0, 5); // Fan + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(NEO_COOLCAM_NAS_WR01W) + + // NEO Coolcam NAS-WR01W Wifi Smart Power Plug + // https://es.aliexpress.com/item/-/32854589733.html?spm=a219c.12010608.0.0.6d084e68xX0y5N + // https://www.fasttech.com/product/9649426-neo-coolcam-nas-wr01w-wifi-smart-power-plug-eu + + setSetting("board", 75); + setSetting("device", "NEO_COOLCAM_NAS_WR01W"); + + setSetting("btnGPIO", 0, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 4); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(PILOTAK_ESP_DIN_V1) + + // ESP-DIN relay board V1 + // https://github.com/pilotak/esp_din + + setSetting("board", 76); + setSetting("device", "PILOTAK_ESP_DIN_V1"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 15); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 4); + setSetting("rlyGPIO", 1, 5); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + + setSetting("digEnabled", 1); + setSetting("digGPIO", 0, 16); + setSetting("digMode", 0, INPUT); + + setSetting("dsEnabled", 1); + setSetting("dsGPIO", 0, 2); + + setSetting("i2cEnable", 1); + setSetting("i2cSDAGPIO", 12); + setSetting("i2cSCLGPIO", 13); + + setSetting("rfEnabled", 1); + setSetting("rfGPIO", 14); + + #elif defined(ESTINK_WIFI_POWER_STRIP) + + // Estink Wifi Power Strip + // https://www.amazon.de/Steckdosenleiste-Ladeger%C3%A4t-Sprachsteuerung-SmartphonesTablets-Android/dp/B0796W5FZY + // Fornorm Wi-Fi USB Extension Socket (ZLD-34EU) + // https://www.aliexpress.com/item/Fornorm-WiFi-Extension-Socket-with-Surge-Protector-Smart-Power-Strip-3-Outlets-and-4-USB-Charging/32849743948.html + + setSetting("board", 77); + setSetting("device", "ESTINK_WIFI_POWER_STRIP"); + + setSetting("btnGPIO", 0, 16); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 3); + + setSetting("ledGPIO", 0, 0); + setSetting("ledGPIO", 1, 12); + setSetting("ledGPIO", 2, 3); + setSetting("ledGPIO", 3, 5); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE); + setSetting("ledLogic", 2, GPIO_LOGIC_INVERSE); + setSetting("ledLogic", 3, GPIO_LOGIC_INVERSE); + setSetting("ledMode", 0, LED_MODE_FINDME); + setSetting("ledMode", 1, LED_MODE_FOLLOW); + setSetting("ledMode", 2, LED_MODE_FOLLOW); + setSetting("ledMode", 3, LED_MODE_FOLLOW); + setSetting("ledRelay", 1, 1); + setSetting("ledRelay", 2, 2); + setSetting("ledRelay", 3, 3); + + setSetting("rlyGPIO", 0, 14); // USB power + setSetting("rlyGPIO", 1, 13); // power plug 1 + setSetting("rlyGPIO", 2, 4); // power plug 2 + setSetting("rlyGPIO", 3, 15); // power plug 3 + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + setSetting("rlyType", 2, RELAY_TYPE_NORMAL); + setSetting("rlyType", 3, RELAY_TYPE_NORMAL); + + setSetting("dbgSerial", 0); + + #elif defined(BH_ONOFRE) + + // Bruno Horta's OnOfre + // https://www.bhonofre.pt/ + // https://github.com/brunohorta82/BH_OnOfre/ + + setSetting("board", 78); + setSetting("device", "BH_ONOFRE"); + + setSetting("btnGPIO", 0, 12); + setSetting("btnGPIO", 1, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP); + setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP); + setSetting("btnRelay", 0, 0); + setSetting("btnRelay", 1, 1); + + setSetting("rlyGPIO", 0, 4); + setSetting("rlyGPIO", 1, 5); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + setSetting("rlyType", 1, RELAY_TYPE_NORMAL); + + #elif defined(BLITZWOLF_BWSHP2) + + // Several boards under different names uing a power chip labelled BL0937 or HJL-01 + // * Blitzwolf (https://www.amazon.es/Inteligente-Temporización-Dispositivos-Cualquier-BlitzWolf/dp/B07BMQP142) + // * HomeCube (https://www.amazon.de/Steckdose-Homecube-intelligente-Verbrauchsanzeige-funktioniert/dp/B076Q2LKHG) + // * Coosa (https://www.amazon.com/COOSA-Monitoring-Function-Campatible-Assiatant/dp/B0788W9TDR) + // * Goosund (http://www.gosund.com/?m=content&c=index&a=show&catid=6&id=5) + // * Ablue (https://www.amazon.de/Intelligente-Steckdose-Ablue-Funktioniert-Assistant/dp/B076DRFRZC) + + setSetting("board", 79); + setSetting("device", "BLITZWOLF_BWSHP2"); + + setSetting("btnGPIO", 0, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 2); + setSetting("ledGPIO", 1, 0); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE); + setSetting("ledMode", 0, LED_MODE_WIFI); + setSetting("ledMode", 1, LED_MODE_FINDME); + setSetting("ledRelay", 1, 0); + + setSetting("rlyGPIO", 0, 15); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + setSetting("hlwSELGPIO", 12); + setSetting("hlwCF1GPIO", 14); + setSetting("hlwCFGPIO", 5); + setSetting("hlwCurLevel", LOW); + setSetting("hlwInt", FALLING); + setSetting("curRatio", 25740); + setSetting("volRatio", 313400); + setSetting("pwrRatio", 3414290); + + + #elif defined(TINKERMAN_ESPURNA_SWITCH) + + setSetting("board", 80); + setSetting("device", "TINKERMAN_ESPURNA_SWITCH"); + + setSetting("btnGPIO", 0, 4); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON); + setSetting("btnPress", 0, BUTTON_MODE_TOGGLE); + setSetting("btnClick", 0, BUTTON_MODE_NONE); + setSetting("btnDblClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngClick", 0, BUTTON_MODE_NONE); + setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 2); + setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + #elif defined(ITEAD_SONOFF_S31) + + setSetting("board", 81); + setSetting("device", "ITEAD_SONOFF_S31"); + + setSetting("btnGPIO", 0, 0); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 13); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + + setSetting("rlyGPIO", 0, 12); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + setSetting("cseEnabled", 1); + setSetting("cseGPIO", 1); + + setSetting("dbgSerial", 0); + + #elif defined(STM_RELAY) + + setSetting("board", 82); + setSetting("device", "STM_RELAY"); + + setSetting("rlyDummy", 2); + setSetting("rlyProvider", RELAY_PROVIDER_STM) + + setSetting("dbgSerial", 0); + + #elif defined(VANZAVANZU_SMART_WIFI_PLUG_MINI) + + // VANZAVANZU Smart Outlet Socket (based on BL0937 or HJL-01) + // https://www.amazon.com/Smart-Plug-Wifi-Mini-VANZAVANZU/dp/B078PHD6S5 + + setSetting("board", 83); + setSetting("device", "VANZAVANZU_SMART_WIFI_PLUG_MINI"); + + setSetting("btnGPIO", 0, 13); + setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH); + setSetting("btnRelay", 0, 0); + + setSetting("ledGPIO", 0, 2); + setSetting("ledGPIO", 1, 0); + setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE); + setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE); + setSetting("ledMode", 0, LED_MODE_WIFI); + setSetting("ledMode", 1, LED_MODE_FINDME); + setSetting("ledRelay", 1, 0); + + setSetting("rlyGPIO", 0, 15); + setSetting("rlyType", 0, RELAY_TYPE_NORMAL); + + setSetting("hlwSELGPIO", 3); + setSetting("hlwCF1GPIO", 14); + setSetting("hlwCFGPIO", 5); + setSetting("hlwCurLevel", LOW); + setSetting("hlwInt", FALLING); + setSetting("curRatio", 25740); + setSetting("volRatio", 313400); + setSetting("pwrRatio", 3414290); + + #elif defined(GENERIC_GEIGER_COUNTER) + + setSetting("board", 84); + setSetting("device", "GENERIC_GEIGER_COUNTER"); + + setSetting("geiEnabled", 1); + + #elif defined(TINKERMAN_RFM69GW) + + // Check http://tinkerman.cat/rfm69-wifi-gateway/ + + setSetting("board", 85); + setSetting("device", "TINKERMAN_RFM69GW"); + + setSetting("btnGPIO", 0, 0); + + setSetting("rfm69Enabled", 1); + setSetting("rfm69CSGPIO", 15); + setSetting("rfm69IRQGPIO", 5); + setSetting("rfm69ResetGPIO", 7); + setSetting("rfm69HW", 0) + + #endif + +} + +void hardwareSetup() { + _hardwareMigrate(); + if (getSetting("board", 1).toInt() != 1) { + _hardwareLoad(); + } +} diff --git a/code/espurna/led.ino b/code/espurna/led.ino index ed296a56..ff0733ed 100644 --- a/code/espurna/led.ino +++ b/code/espurna/led.ino @@ -146,7 +146,7 @@ void _ledConfigure() { } - DEBUG_MSG_P(PSTR("[LED] Number of leds: %d\n"), _leds.size()); + DEBUG_MSG_P(PSTR("[LED] LEDs: %d\n"), _leds.size()); _led_update = true; diff --git a/code/espurna/migrate.ino b/code/espurna/migrate.ino deleted file mode 100644 index f3e2d357..00000000 --- a/code/espurna/migrate.ino +++ /dev/null @@ -1,60 +0,0 @@ -/* - -MIGRATE MODULE - -Copyright (C) 2016-2018 by Xose Pérez - -*/ - -void _migrateMoveIndexDown(const char * key, int offset = 0) { - if (hasSetting(key, 0)) return; - for (unsigned char index = 1; index < SETTINGS_MAX_LIST_COUNT; index++) { - if (hasSetting(key, index)) { - setSetting(key, index - 1, getSetting(key, index).toInt() + offset); - } else { - delSetting(key, index - 1); - } - } -} - -// Configuration versions -// -// 1: based on Embedis, no board definitions -// 2: based on Embedis, with board definitions 1-based -// 3: based on Embedis, with board definitions 0-based -// 4: based on Embedis, added sensors and force resetting - -void migrate() { - - moveSetting("boardName", "device"); - moveSettings("relayGPIO", "rlyGPIO"); - moveSettings("relayResetGPIO", "rlyResetGPIO"); - moveSettings("relayType", "rlyType"); - moveSetting("selGPIO", "hlwSELGPIO"); - moveSetting("cfGPIO", "hlwCFGPIO"); - moveSetting("cf1GPIO", "hlwCF1GPIO"); - moveSetting("relayProvider", "rlyProvider"); - moveSetting("lightProvider", "litProvider"); - moveSetting("relays", "rlyCount"); - moveSettings("chGPIO", "litChGPIO"); - moveSettings("chLogic", "litChLogic"); - moveSetting("enGPIO", "litEnableGPIO"); - moveSetting("hlwSelC", "hlwCurLevel"); - moveSetting("hlwIntM", "hlwInt"); - delSetting("ledWifi"); - - // Get config version - unsigned int board = getSetting("board", 0).toInt(); - unsigned int config_version = getSetting("cfg", board > 0 ? 2 : 1).toInt(); - setSetting("cfg", CFG_VERSION); - - if (config_version == 2) { - _migrateMoveIndexDown("ledGPIO"); - _migrateMoveIndexDown("ledLogic"); - _migrateMoveIndexDown("btnGPIO"); - _migrateMoveIndexDown("btnRelay", -1); - _migrateMoveIndexDown("rlyGPIO"); - _migrateMoveIndexDown("rlyType"); - } - -} diff --git a/code/espurna/relay.ino b/code/espurna/relay.ino index 94e617b7..f7a937bc 100644 --- a/code/espurna/relay.ino +++ b/code/espurna/relay.ino @@ -514,15 +514,16 @@ void _relayConfigure() { // Dummy relays for AI Light, Magic Home LED Controller, H801, // Sonoff Dual and Sonoff RF Bridge - #if DUMMY_RELAY_COUNT > 0 + unsigned char dummy = getSetting("rlyDummy", 0).toInt(); + if (dummy > 0) { - for (unsigned char index=0; index < DUMMY_RELAY_COUNT; index++) { + for (unsigned char index=0; index < dummy; index++) { unsigned long delay_on = getSetting("rlyDelayOn", index, 0).toInt(); unsigned long delay_off = getSetting("rlyDelayOff", index, 0).toInt(); _relays.push_back((relay_t) {0, RELAY_TYPE_NORMAL, 0, delay_on, delay_off}); } - #else + } else { unsigned char index = 0; while (index < MAX_COMPONENTS) { @@ -547,9 +548,9 @@ void _relayConfigure() { } - #endif + } - DEBUG_MSG_P(PSTR("[RELAY] Number of relays: %d\n"), _relays.size()); + DEBUG_MSG_P(PSTR("[RELAY] Relays: %d\n"), _relays.size()); } diff --git a/code/espurna/utils.ino b/code/espurna/utils.ino index 06f4f03d..ed004828 100644 --- a/code/espurna/utils.ino +++ b/code/espurna/utils.ino @@ -34,18 +34,6 @@ String getPassword() { return getSetting("adminPass", ADMIN_PASS); } -void loadBoard() { - #ifndef ESPURNA_CORE - char buffer[device_config_len+1]; - strncpy_P(buffer, (const char *) device_config, device_config_len); - buffer[device_config_len] = 0; - DynamicJsonBuffer jsonBuffer; - JsonObject& json = jsonBuffer.parseObject(buffer); - json["app"] = APP_NAME; - settingsRestoreJson(json); - #endif -} - String getManufacturer() { String device = getDevice(); uint8_t pos = device.indexOf("_");