Fixed old reference to dallas sensors in platformio.ini file. Default GPIO for DALLAS and DHT set to 14

code/espurna/config/sensors.h

@@ -158,7 +158,7 @@
 #endif
 
 #ifndef DALLAS_PIN
-#define DALLAS_PIN                      13
+#define DALLAS_PIN                      14
 #endif
 
 #define DALLAS_RESOLUTION               9        // Not used atm
@@ -174,7 +174,7 @@
 #endif
 
 #ifndef DHT_PIN
-#define DHT_PIN                         13
+#define DHT_PIN                         14
 #endif
 
 #ifndef DHT_TYPE

code/platformio.ini

@@ -171,7 +171,7 @@ upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
 
-[env:itead-sonoff-basic-dht22]
+[env:itead-sonoff-basic-dht]
 platform = ${common.platform}
 framework = arduino
 board = esp01_1m
@@ -181,7 +181,7 @@ lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_BASIC -DDHT_SUPPORT=1
 monitor_baud = 115200
 
-[env:itead-sonoff-basic-dht22-ota]
+[env:itead-sonoff-basic-dht-ota]
 platform = ${common.platform}
 framework = arduino
 board = esp01_1m
@@ -194,14 +194,14 @@ upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266
 monitor_baud = 115200
 
-[env:itead-sonoff-basic-ds18b20]
+[env:itead-sonoff-basic-dallas]
 platform = ${common.platform}
 framework = arduino
 board = esp01_1m
 board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_BASIC -DDS18B20_SUPPORT=1
+build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_BASIC -DDALLAS_SUPPORT=1
 monitor_baud = 115200
 
 [env:itead-sonoff-rf]
@@ -689,7 +689,7 @@ framework = arduino
 board = esp_wroom_02
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags} -DOPENENERGYMONITOR_MQTT_RELAY -DDS18B20_SUPPORT=1
+build_flags = ${common.build_flags} -DOPENENERGYMONITOR_MQTT_RELAY -DDALLAS_SUPPORT=1
 monitor_baud = 115200
 
 [env:openenergymonitor-mqtt-relay-ota]
@@ -698,7 +698,7 @@ framework = arduino
 board = esp_wroom_02
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
-build_flags = ${common.build_flags} -DOPENENERGYMONITOR_MQTT_RELAY -DDS18B20_SUPPORT=1
+build_flags = ${common.build_flags} -DOPENENERGYMONITOR_MQTT_RELAY -DDALLAS_SUPPORT=1
 upload_speed = 115200
 upload_port = "192.168.4.1"
 upload_flags = --auth=fibonacci --port 8266