Adding support for miobulb001 (#1973)

* Adding support for miobulb001

* Add miobulb001 images

* defined MUVIT_IO_MIOBULB001

* Update platformio.ini

revert default env
use dashes

* typo

* typo

README.md

@@ -328,6 +328,8 @@ Here is the list of supported hardware. For more information please refer to the
 |**Arilux AL-LC01 (RGB)**|**Arilux AL-LC02 (RGBW)**|**Arilux AL-LC06 (RGBWWCW)**|
 |![Arilux AL-LC11 (RGBWWW) & RF](images/devices/arilux-al-lc11.jpg)|![MagicHome LED Controller (1.0 and 2.x)](images/devices/magichome-led-controller.jpg)|![Huacanxing H801/802](images/devices/huacanxing-h801.jpg)|
 |**Arilux AL-LC11 (RGBWWW) & RF**|**MagicHome LED Controller (1.0/2.x, also ZJ WFMN A/B11)**|**Huacanxing H801/802**|
+|![Muvit I/O MIOBULB001](images/devices/muvit-io-miobulb001.jpg)|
+|**Muvit I/O MIOBULB001**|
 
 ### Radio links / gateways
 

code/espurna/config/arduino.h

@@ -105,6 +105,7 @@
 //#define MANCAVEMADE_ESPLIVE
 //#define MAXCIO_WDE004
 //#define MAXCIO_WUS002S
+//#define MUVIT_IO_MIOBULB001
 //#define NEO_COOLCAM_NAS_WR01W
 //#define NEXETE_A19
 //#define NODEMCU_BASIC

code/espurna/config/hardware.h

@@ -4012,6 +4012,31 @@
     #define HLW8012_INTERRUPT_ON        FALLING
 
 
+// -----------------------------------------------------------------------------
+// MUVIT_IO_MIOBULB001
+// -----------------------------------------------------------------------------
+
+#elif defined(MUVIT_IO_MIOBULB001)
+
+    // Info
+    #define MANUFACTURER        "MUVIT_IO"
+    #define DEVICE              "MIOBULB001"
+    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT
+    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER
+    #define DUMMY_RELAY_COUNT   1
+
+    // Light
+    #define LIGHT_CHANNELS      4
+    #define LIGHT_CH1_PIN       14      // RED
+    #define LIGHT_CH2_PIN       12      // GREEN
+    #define LIGHT_CH3_PIN       13      // BLUE
+    #define LIGHT_CH4_PIN       4       // WHITE
+    #define LIGHT_CH1_INVERSE   0
+    #define LIGHT_CH2_INVERSE   0
+    #define LIGHT_CH3_INVERSE   0
+    #define LIGHT_CH4_INVERSE   0
+
+
 // -----------------------------------------------------------------------------
 
 #else

code/espurna/migrate.ino

@@ -1372,6 +1372,21 @@ void migrate() {
             setSetting("hlwSelC", LOW);
             setSetting("hlwIntM", FALLING);
 
+        #elif defined(MUVIT_IO_MIOBULB001)
+
+            setSetting("board", 102);
+            setSetting("relayProvider", RELAY_PROVIDER_LIGHT);
+            setSetting("lightProvider", LIGHT_PROVIDER_DIMMER);
+            setSetting("chGPIO", 0, 14);
+            setSetting("chGPIO", 1, 12);
+            setSetting("chGPIO", 2, 13);
+            setSetting("chGPIO", 3, 4);
+            setSetting("chLogic", 0, 0);
+            setSetting("chLogic", 1, 0);
+            setSetting("chLogic", 2, 0);
+            setSetting("chLogic", 3, 0);
+            setSetting("relays", 1);
+
         #else
 
             // Allow users to define new settings without migration config

code/platformio.ini

@@ -1626,4 +1626,14 @@ build_flags = ${common.build_flags_4m1m} -DFS_UAP1
 board = ${common.board_4m}
 build_flags = ${common.build_flags_4m1m} -DFS_UAP1
 upload_port = ${common.ota_upload_port}
-upload_flags = ${common.ota_upload_flags}
+upload_flags = ${common.ota_upload_flags}
+
+[env:muvit-io-miobulb001]
+board = ${common.board_1m}
+build_flags = ${common.build_flags_1m0m} -DMUVIT_IO_MIOBULB001
+
+[env:muvit-io-miobulb001-ota]
+board = ${common.board_1m}
+build_flags = ${common.build_flags_1m0m} -DMUVIT_IO_MIOBULB001
+upload_port = ${common.ota_upload_port}
+upload_flags = ${common.ota_upload_flags}