mh
/
mhsw-espurna
1
0
Fork 0
Code Releases 0 Activity
Browse Source

parametrized stuff from general.h 

ups, forgot this one :)

parametrize debug-udp

Wrong file from wrong branch
rfm69
Lazar Obradovic 6 years ago
parent
0bdd00304f
commit
d0f5d7a01b
1 changed files with 267 additions and 7 deletions
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. +267
    -7
      code/espurna/config/general.h

+ 267
- 7
code/espurna/config/general.h View File

@ -8,9 +8,19 @@
//------------------------------------------------------------------------------
#define DEVICE_NAME MANUFACTURER "_" DEVICE // Concatenate both to get a unique device name
#ifndef ADMIN_PASS
#define ADMIN_PASS "fibonacci" // Default password (WEB, OTA, WIFI)
#endif
#ifndef USE_PASSWORD
#define USE_PASSWORD 1 // Insecurity caution! Disabling this will disable password querying completely.
#endif
#ifndef LOOP_DELAY_TIME
#define LOOP_DELAY_TIME 10 // Delay for this millis in the main loop [0-250]
#endif
#define ARRAYINIT(type, name, ...) \
type name[] = {__VA_ARGS__};
@ -78,8 +88,14 @@
#ifndef DEBUG_UDP_SUPPORT
#define DEBUG_UDP_SUPPORT 0 // Enable UDP debug log
#endif
#ifndef DEBUG_UDP_IP
#define DEBUG_UDP_IP IPAddress(192, 168, 1, 100)
#endif
#ifndef DEBUG_UDP_PORT
#define DEBUG_UDP_PORT 8113
#endif
//------------------------------------------------------------------------------
@ -104,6 +120,7 @@
#endif
#define DEBUG_WEB_ENABLED 1 // Enable debug output by default
#endif
//------------------------------------------------------------------------------
@ -139,6 +156,7 @@
#endif
#define SYSTEM_CHECK_TIME 60000 // The system is considered stable after these many millis
#ifndef SYSTEM_CHECK_MAX
#define SYSTEM_CHECK_MAX 5 // After this many crashes on boot
// the system is flagged as unstable
@ -187,8 +205,13 @@
//------------------------------------------------------------------------------
// Load average
//------------------------------------------------------------------------------
#ifndef LOADAVG_INTERVAL
#define LOADAVG_INTERVAL 30000 // Interval between calculating load average (in ms)
#endif
#ifndef LOADAVG_REPORT
#define LOADAVG_REPORT 1 // Should we report Load average over MQTT?
#endif
//------------------------------------------------------------------------------
// RESET
@ -291,28 +314,44 @@ PROGMEM const char* const custom_reset_string[] = {
#define RELAY_PROVIDER_STM 4
// Default boot mode: 0 means OFF, 1 ON and 2 whatever was before
#ifndef RELAY_BOOT_MODE
#define RELAY_BOOT_MODE RELAY_BOOT_OFF
#endif
// 0 means ANY, 1 zero or one and 2 one and only one
#ifndef RELAY_SYNC
#define RELAY_SYNC RELAY_SYNC_ANY
#endif
// Default pulse mode: 0 means no pulses, 1 means normally off, 2 normally on
#ifndef RELAY_PULSE_MODE
#define RELAY_PULSE_MODE RELAY_PULSE_NONE
#endif
// Default pulse time in seconds
#ifndef RELAY_PULSE_TIME
#define RELAY_PULSE_TIME 1.0
#endif
// Relay requests flood protection window - in seconds
#ifndef RELAY_FLOOD_WINDOW
#define RELAY_FLOOD_WINDOW 3
#endif
// Allowed actual relay changes inside requests flood protection window
#ifndef RELAY_FLOOD_CHANGES
#define RELAY_FLOOD_CHANGES 5
#endif
// Pulse with in milliseconds for a latched relay
#ifndef RELAY_LATCHING_PULSE
#define RELAY_LATCHING_PULSE 10
#endif
// Do not save relay state after these many milliseconds
#ifndef RELAY_SAVE_DELAY
#define RELAY_SAVE_DELAY 1000
#endif
//------------------------------------------------------------------------------
// LED
@ -333,53 +372,86 @@ PROGMEM const char* const custom_reset_string[] = {
// WIFI
// -----------------------------------------------------------------------------
#ifndef WIFI_CONNECT_TIMEOUT
#define WIFI_CONNECT_TIMEOUT 60000 // Connecting timeout for WIFI in ms
#endif
#ifndef WIFI_RECONNECT_INTERVAL
#define WIFI_RECONNECT_INTERVAL 180000 // If could not connect to WIFI, retry after this time in ms
#endif
#define WIFI_MAX_NETWORKS 5 // Max number of WIFI connection configurations
#ifndef WIFI_AP_MODE
#define WIFI_AP_MODE AP_MODE_ALONE
#endif
#ifndef WIFI_SLEEP_MODE
#define WIFI_SLEEP_MODE WIFI_NONE_SLEEP // WIFI_NONE_SLEEP, WIFI_LIGHT_SLEEP or WIFI_MODEM_SLEEP
#endif
#ifndef WIFI_SCAN_NETWORKS
#define WIFI_SCAN_NETWORKS 1 // Perform a network scan before connecting
#endif
// Optional hardcoded configuration (up to 2 networks)
#ifndef WIFI1_SSID
#define WIFI1_SSID ""
#endif
#ifndef WIFI1_PASS
#define WIFI1_PASS ""
#endif
#ifndef WIFI1_IP
#define WIFI1_IP ""
#endif
#ifndef WIFI1_GW
#define WIFI1_GW ""
#endif
#ifndef WIFI1_MASK
#define WIFI1_MASK ""
#endif
#ifndef WIFI1_DNS
#define WIFI1_DNS ""
#endif
#endif // WIFI1
#ifndef WIFI2_SSID
#define WIFI2_SSID ""
#endif
#ifndef WIFI2_PASS
#define WIFI2_PASS ""
#endif
#ifndef WIFI2_IP
#define WIFI2_IP ""
#endif
#ifndef WIFI2_GW
#define WIFI2_GW ""
#endif
#ifndef WIFI2_MASK
#define WIFI2_MASK ""
#endif
#ifndef WIFI2_DNS
#define WIFI2_DNS ""
#endif
#endif // WIFI2
#ifndef WIFI_RSSI_1M
#define WIFI_RSSI_1M -30 // Calibrate it with your router reading the RSSI at 1m
#endif
#ifndef WIFI_PROPAGATION_CONST
#define WIFI_PROPAGATION_CONST 4 // This is typically something between 2.7 to 4.3 (free space is 2)
#endif
// -----------------------------------------------------------------------------
// WEB
@ -395,35 +467,60 @@ PROGMEM const char* const custom_reset_string[] = {
// This is not working at the moment!!
// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0
#ifndef WEB_SSL_ENABLED
#define WEB_SSL_ENABLED 0 // Use HTTPS web interface
#endif
#define WEB_MODE_NORMAL 0
#define WEB_MODE_PASSWORD 1
#ifndef WEB_USERNAME
#define WEB_USERNAME "admin" // HTTP username
#endif
#ifndef WEB_FORCE_PASS_CHANGE
#define WEB_FORCE_PASS_CHANGE 1 // Force the user to change the password if default one
#endif
#ifndef WEB_PORT
#define WEB_PORT 80 // HTTP port
#endif
// -----------------------------------------------------------------------------
// WEBSOCKETS
// -----------------------------------------------------------------------------
// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)
#ifndef WS_AUTHENTICATION
#define WS_AUTHENTICATION 1 // WS authentication ON by default (see #507)
#endif
#ifndef WS_BUFFER_SIZE
#define WS_BUFFER_SIZE 5 // Max number of secured websocket connections
#endif
#ifndef WS_TIMEOUT
#define WS_TIMEOUT 1800000 // Timeout for secured websocket
#endif
#ifndef WS_UPDATE_INTERVAL
#define WS_UPDATE_INTERVAL 30000 // Update clients every 30 seconds
#endif
// -----------------------------------------------------------------------------
// API
// -----------------------------------------------------------------------------
// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)
#ifndef API_ENABLED
#define API_ENABLED 0 // Do not enable API by default
#endif
#ifndef API_BUFFER_SIZE
#define API_BUFFER_SIZE 15 // Size of the buffer for HTTP GET API responses
#endif
#ifndef API_REAL_TIME_VALUES
#define API_REAL_TIME_VALUES 0 // Show filtered/median values by default (0 => median, 1 => real time)
#endif
// -----------------------------------------------------------------------------
// UI
@ -480,7 +577,10 @@ PROGMEM const char* const custom_reset_string[] = {
// OTA
// -----------------------------------------------------------------------------
#ifndef OTA_PORT
#define OTA_PORT 8266 // OTA port
#endif
#define OTA_GITHUB_FP "D7:9F:07:61:10:B3:92:93:E3:49:AC:89:84:5B:03:80:C1:9E:2F:8B"
// -----------------------------------------------------------------------------
@ -491,9 +591,17 @@ PROGMEM const char* const custom_reset_string[] = {
#define NOFUSS_SUPPORT 0 // Do not enable support for NoFuss by default (12.65Kb)
#endif
#ifndef NOFUSS_ENABLED
#define NOFUSS_ENABLED 0 // Do not perform NoFUSS updates by default
#endif
#ifndef NOFUSS_SERVER
#define NOFUSS_SERVER "" // Default NoFuss Server
#endif
#ifndef NOFUSS_INTERVAL
#define NOFUSS_INTERVAL 3600000 // Check for updates every hour
#endif
// -----------------------------------------------------------------------------
// UART <-> MQTT
@ -503,11 +611,26 @@ PROGMEM const char* const custom_reset_string[] = {
#define UART_MQTT_SUPPORT 0 // No support by default
#endif
#ifndef UART_MQTT_USE_SOFT
#define UART_MQTT_USE_SOFT 0 // Use SoftwareSerial
#endif
#ifndef UART_MQTT_HW_PORT
#define UART_MQTT_HW_PORT Serial // Hardware serial port (if UART_MQTT_USE_SOFT == 0)
#endif
#ifndef UART_MQTT_RX_PIN
#define UART_MQTT_RX_PIN 4 // RX PIN (if UART_MQTT_USE_SOFT == 1)
#endif
#ifndef UART_MQTT_TX_PIN
#define UART_MQTT_TX_PIN 5 // TX PIN (if UART_MQTT_USE_SOFT == 1)
#endif
#ifndef UART_MQTT_BAUDRATE
#define UART_MQTT_BAUDRATE 115200 // Serial speed
#endif
#define UART_MQTT_BUFFER_SIZE 100 // UART buffer size
#if UART_MQTT_SUPPORT
@ -548,31 +671,91 @@ PROGMEM const char* const custom_reset_string[] = {
// $ echo -n | openssl s_client -connect m11.cloudmqtt.com:24055 > cloudmqtt.pem
// $ openssl x509 -noout -in cloudmqtt.pem -fingerprint -sha1
#ifndef MQTT_SSL_ENABLED
#define MQTT_SSL_ENABLED 0 // By default MQTT over SSL will not be enabled
#endif
#ifndef MQTT_SSL_FINGERPRINT
#define MQTT_SSL_FINGERPRINT "" // SSL fingerprint of the server
#endif
#ifndef MQTT_ENABLED
#define MQTT_ENABLED 0 // Do not enable MQTT connection by default
#endif
#ifndef MQTT_AUTOCONNECT
#define MQTT_AUTOCONNECT 1 // If enabled and MDNS_SERVER_SUPPORT=1 will perform an autodiscover and
#endif
// autoconnect to the first MQTT broker found if none defined
#ifndef MQTT_SERVER
#define MQTT_SERVER "" // Default MQTT broker address
#endif
#ifndef MQTT_USER
#define MQTT_USER "" // Default MQTT broker usename
#endif
#ifndef MQTT_PASS
#define MQTT_PASS "" // Default MQTT broker password
#endif
#ifndef MQTT_PORT
#define MQTT_PORT 1883 // MQTT broker port
#endif
#ifndef MQTT_TOPIC
#define MQTT_TOPIC "{hostname}" // Default MQTT base topic
#endif
#ifndef MQTT_RETAIN
#define MQTT_RETAIN true // MQTT retain flag
#endif
#ifndef MQTT_QOS
#define MQTT_QOS 0 // MQTT QoS value for all messages
#endif
#ifndef MQTT_KEEPALIVE
#define MQTT_KEEPALIVE 30 // MQTT keepalive value
#endif
#ifndef MQTT_RECONNECT_DELAY_MIN
#define MQTT_RECONNECT_DELAY_MIN 5000 // Try to reconnect in 5 seconds upon disconnection
#endif
#ifndef MQTT_RECONNECT_DELAY_STEP
#define MQTT_RECONNECT_DELAY_STEP 5000 // Increase the reconnect delay in 5 seconds after each failed attempt
#endif
#ifndef MQTT_RECONNECT_DELAY_MAX
#define MQTT_RECONNECT_DELAY_MAX 120000 // Set reconnect time to 2 minutes at most
#endif
#ifndef MQTT_SKIP_RETAINED
#define MQTT_SKIP_RETAINED 1 // Skip retained messages on connection
#endif
#ifndef MQTT_SKIP_TIME
#define MQTT_SKIP_TIME 1000 // Skip messages for 1 second anter connection
#endif
#ifndef MQTT_USE_JSON
#define MQTT_USE_JSON 0 // Group messages in a JSON body
#endif
#ifndef MQTT_USE_JSON_DELAY
#define MQTT_USE_JSON_DELAY 100 // Wait this many ms before grouping messages
#endif
#ifndef MQTT_QUEUE_MAX_SIZE
#define MQTT_QUEUE_MAX_SIZE 20 // Size of the MQTT queue when MQTT_USE_JSON is enabled
#endif
// These are the properties that will be sent when useJson is true
#ifndef MQTT_ENQUEUE_IP
@ -693,7 +876,10 @@ PROGMEM const char* const custom_reset_string[] = {
#define LIGHT_SAVE_ENABLED 1 // Light channel values saved by default after each change
#endif
#ifndef LIGHT_SAVE_DELAY
#define LIGHT_SAVE_DELAY 5 // Persist color after 5 seconds to avoid wearing out
#endif
#ifndef LIGHT_MAX_PWM
@ -720,15 +906,41 @@ PROGMEM const char* const custom_reset_string[] = {
//#define LIGHT_MAX_MIREDS 500 // NOT USED (yet)! // https://developers.meethue.com/documentation/core-concepts
#define LIGHT_DEFAULT_MIREDS 153 // Default value used by MQTT. This value is __NEVRER__ applied!
#define LIGHT_STEP 32 // Step size
#endif
#ifndef LIGHT_USE_COLOR
#define LIGHT_USE_COLOR 1 // Use 3 first channels as RGB
#endif
#ifndef LIGHT_USE_WHITE
#define LIGHT_USE_WHITE 0 // Use white channel whenever RGB have the same value
#endif
#ifndef LIGHT_USE_GAMMA
#define LIGHT_USE_GAMMA 0 // Use gamma correction for color channels
#endif
#ifndef LIGHT_USE_CSS
#define LIGHT_USE_CSS 1 // Use CSS style to report colors (1=> "#FF0000", 0=> "255,0,0")
#endif
#ifndef LIGHT_USE_RGB
#define LIGHT_USE_RGB 0 // Use RGB color selector (1=> RGB, 0=> HSV)
#endif
#ifndef LIGHT_USE_TRANSITIONS
#define LIGHT_USE_TRANSITIONS 1 // Transitions between colors
#endif
#ifndef LIGHT_TRANSITION_STEP
#define LIGHT_TRANSITION_STEP 10 // Time in millis between each transtion step
#endif
#ifndef LIGHT_TRANSITION_TIME
#define LIGHT_TRANSITION_TIME 500 // Time in millis from color to color
#endif
// -----------------------------------------------------------------------------
// DOMOTICZ
@ -771,12 +983,30 @@ PROGMEM const char* const custom_reset_string[] = {
#define INFLUXDB_SUPPORT 0 // Disable InfluxDB support by default (4.38Kb)
#endif
#ifndef INFLUXDB_ENABLED
#define INFLUXDB_ENABLED 0 // InfluxDB disabled by default
#endif
#ifndef INFLUXDB_HOST
#define INFLUXDB_HOST "" // Default server
#endif
#ifndef INFLUXDB_PORT
#define INFLUXDB_PORT 8086 // Default InfluxDB port
#endif
#ifndef INFLUXDB_DATABASE
#define INFLUXDB_DATABASE "" // Default database
#endif
#ifndef INFLUXDB_USERNAME
#define INFLUXDB_USERNAME "" // Default username
#endif
#ifndef INFLUXDB_PASSWORD
#define INFLUXDB_PASSWORD "" // Default password
#endif
// -----------------------------------------------------------------------------
// THINGSPEAK
@ -839,14 +1069,32 @@ PROGMEM const char* const custom_reset_string[] = {
#define NTP_SUPPORT 1 // Build with NTP support by default (6.78Kb)
#endif
#ifndef NTP_SERVER
#define NTP_SERVER "pool.ntp.org" // Default NTP server
#endif
#ifndef NTP_TIMEOUT
#define NTP_TIMEOUT 2000 // Set NTP request timeout to 2 seconds (issue #452)
#define NTP_TIME_OFFSET 60 // Default timezone offset (GMT+1)
#define NTP_DAY_LIGHT true // Enable daylight time saving by default
#endif
#ifndef NTP_SYNC_INTERVAL
#define NTP_SYNC_INTERVAL 60 // NTP initial check every minute
#endif
#ifndef NTP_UPDATE_INTERVAL
#define NTP_UPDATE_INTERVAL 1800 // NTP check every 30 minutes
#endif
#ifndef NTP_START_DELAY
#define NTP_START_DELAY 1000 // Delay NTP start 1 second
#endif
#ifndef NTP_DST_REGION
#define NTP_DST_REGION 0 // 0 for Europe, 1 for USA (defined in NtpClientLib)
#endif
// -----------------------------------------------------------------------------
// ALEXA
@ -867,12 +1115,24 @@ PROGMEM const char* const custom_reset_string[] = {
// This module is not compatible with RF_SUPPORT=1
// -----------------------------------------------------------------------------
#ifndef RF_SEND_TIMES
#define RF_SEND_TIMES 4 // How many times to send the message
#endif
#ifndef RF_SEND_DELAY
#define RF_SEND_DELAY 500 // Interval between sendings in ms
#endif
#ifndef RF_RECEIVE_DELAY
#define RF_RECEIVE_DELAY 500 // Interval between recieving in ms (avoid debouncing)
#endif
#ifndef RF_RAW_SUPPORT
#define RF_RAW_SUPPORT 0 // RF raw codes require a specific firmware for the EFM8BB1
// https://github.com/rhx/RF-Bridge-EFM8BB1
#endif
// -----------------------------------------------------------------------------
// IR


Write Preview
Loading…
Cancel
Save