hardware: Add support for HUGOAI smart socket plug. (#2243)

* hardware: Add support for HUGOAI smart socket plug.

* Update code/platformio.ini

Co-authored-by: pezinek <pezinek@gmail.com>

Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>
Co-authored-by: pezinek <pezinek@gmail.com>

code/espurna/config/arduino.h

@@ -70,6 +70,7 @@
 //#define HOMECUBE_16A
 //#define HUACANXING_H801
 //#define HUACANXING_H802
+//#define HUGOAI_AWP02L_N
 //#define HYKKER_SMART_HOME_POWER_PLUG
 //#define IKE_ESPIKE
 //#define INTERMITTECH_QUINLED

code/espurna/config/hardware.h

@@ -1487,6 +1487,42 @@
     #define LIGHT_CH3_PIN       13      // BLUE
     #define LIGHT_CH4_PIN       15      // WHITE
 
+// -----------------------------------------------------------------------------
+// HUGOAI AWP02L-N
+// Pin equivalence extracted from https://templates.blakadder.com/hugoai_awp02l-n.html
+//
+// It follows almost same structure as AOYCOCR X5P with only 1 LED on GPIO02
+//
+// -----------------------------------------------------------------------------
+
+#elif defined(HUGOAI_AWP02L_N)
+    #define MANUFACTURER                "HUGOAI"
+    #define DEVICE                      "AWP02L-N"
+
+    // Buttons
+    #define BUTTON1_PIN                 13
+    #define BUTTON1_CONFIG              BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
+    #define BUTTON1_RELAY               1
+    // the defaults are reasonable, but you can change them as desired
+    //#define BUTTON1_PRESS               BUTTON_ACTION_NONE
+    //#define BUTTON1_CLICK               BUTTON_ACTION_TOGGLE
+    //#define BUTTON1_DBLCLICK            BUTTON_ACTION_AP
+    //#define BUTTON1_LNGCLICK            BUTTON_ACTION_RESET
+    //#define BUTTON1_LNGLNGCLICK         BUTTON_ACTION_FACTORY
+
+    // Relays
+    #define RELAY1_PIN                  15
+    #define RELAY1_TYPE                 RELAY_TYPE_NORMAL
+
+    // LEDs
+
+    // LED1 (blue) indicates on/off state; you could use LED_MODE_FOLLOW_INVERSE
+    // so that the LED lights the button when 'off' so it can be found easily.
+    #define LED1_PIN                    2
+    #define LED1_PIN_INVERSE            1
+    #define LED1_MODE                   LED_MODE_FOLLOW
+    #define LED1_RELAY                  1
+
 // -----------------------------------------------------------------------------
 // Jan Goedeke Wifi Relay
 // https://github.com/JanGoe/esp8266-wifi-relay

code/platformio.ini

@@ -353,7 +353,7 @@ src_build_flags = -DTINKERMAN_RFM69GW -DNOWSAUTH
 
 [env:foxel-lightfox-dual]
 extends = env:esp8266-1m-base
-src_build_flags = 
+src_build_flags =
     -DFOXEL_LIGHTFOX_DUAL
     -DDISABLE_POSTMORTEM_STACKDUMP
 
@@ -1006,3 +1006,7 @@ src_build_flags = -DKINGART_CURTAIN_SWITCH
 [env:aoycocr-x5p]
 extends = env:esp8266-1m-base
 src_build_flags = -DAOYCOCR_X5P
+
+[env:hugoai-awp02l-n]
+extends = env:esp8266-1m-base
+src_build_flags = -DHUGOAI_AWP02L_N