Update arduino.h and platformio.ini (#1774) (#1790)

code/espurna/config/arduino.h

@@ -81,6 +81,7 @@
 //#define IWOOLE_LED_TABLE_LAMP
 //#define JANGOE_WIFI_RELAY_NC
 //#define JANGOE_WIFI_RELAY_NO
+//#define JINVOO_VALVE_SM_AW713
 //#define JORGEGARCIA_WIFI_RELAYS
 //#define KMC_70011
 //#define LINGAN_SWA1

code/espurna/config/hardware.h

@@ -3577,6 +3577,36 @@
     #define LDR_ON_GROUND       false
     #define LDR_RESISTOR        10000
 
+#elif defined(JINVOO_VALVE_SM_AW713)
+
+    // Reflashing from original Tuya firmware
+    // to thirdparty firmware like espurna by:
+    // https://github.com/ct-Open-Source/tuya-convert
+
+    // Info
+    #define MANUFACTURER        "JINVOO"
+    #define DEVICE              "VALVE_SM_AW713"
+
+    // Buttons
+    #define BUTTON1_PIN         13
+    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
+    #define BUTTON1_RELAY       1
+
+    // Relays
+    #define RELAY1_PIN          12
+    #define RELAY1_TYPE         RELAY_TYPE_NORMAL
+
+    // LED
+    #define LED1_PIN            5  // 5 red led
+    #define LED1_PIN_INVERSE    0
+    #define LED1_RELAY          1
+    #define LED1_MODE           LED_MODE_RELAY
+
+    #define LED2_PIN            4  // 4 blue led
+    #define LED2_PIN_INVERSE    0
+    #define LED2_RELAY          1
+    #define LED2_MODE           LED_MODE_FINDME_WIFI
+
 // -----------------------------------------------------------------------------
 // TEST boards (do not use!!)
 // -----------------------------------------------------------------------------
@@ -3781,36 +3811,6 @@
     #define SSDP_SUPPORT        1
     #define RF_SUPPORT          1
 
-#elif defined(JINVOO_VALVE_SM_AW713)
-
-    // Reflashing from original Tuya firmware 
-    // to thirdparty firmware like espurna by:
-    // https://github.com/ct-Open-Source/tuya-convert
-
-    // Info
-    #define MANUFACTURER        "JINVOO"
-    #define DEVICE              "VALVE_SM_AW713"
-
-    // Buttons
-    #define BUTTON1_PIN         13
-    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH
-    #define BUTTON1_RELAY       1
-
-    // Relays
-    #define RELAY1_PIN          12
-    #define RELAY1_TYPE         RELAY_TYPE_NORMAL
-
-    // LED
-    #define LED1_PIN            5  // 5 red led
-    #define LED1_PIN_INVERSE    0
-    #define LED1_RELAY          1
-    #define LED1_MODE           LED_MODE_RELAY
-
-    #define LED2_PIN            4  // 4 blue led
-    #define LED2_PIN_INVERSE    0
-    #define LED2_RELAY          1
-    #define LED2_MODE           LED_MODE_FINDME_WIFI
-
 #endif
 
 // -----------------------------------------------------------------------------

code/platformio.ini

@@ -3399,3 +3399,28 @@ upload_port = ${common.upload_port}
 upload_flags = ${common.upload_flags}
 monitor_speed = ${common.monitor_speed}
 extra_scripts = ${common.extra_scripts}
+
+[env:jinvoo-valve-sm-aw713]
+platform = ${common.platform}
+framework = ${common.framework}
+board = ${common.board_1m}
+board_build.flash_mode = ${common.flash_mode}
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m0m} -DJINVOO_VALVE_SM_AW713
+monitor_speed = ${common.monitor_speed}
+extra_scripts = ${common.extra_scripts}
+
+[env:jinvoo-valve-sm-aw713-ota]
+platform = ${common.platform}
+framework = ${common.framework}
+board = ${common.board_1m}
+board_build.flash_mode = ${common.flash_mode}
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m0m} -DJINVOO_VALVE_SM_AW713
+upload_speed = ${common.upload_speed}
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
+monitor_speed = ${common.monitor_speed}
+extra_scripts = ${common.extra_scripts}