new devices

new devices; heltec touch relay, generic relay 4.0, generic rgbled 1.0

README.md

@@ -235,6 +235,8 @@ Here is the list of supported hardware. For more information please refer to the
 |**Jan Goedeke Wifi Relay (NO/NC)**|**Jorge García Wifi + Relays Board Kit**|**EXS Wifi Relay v3.1**|
 |![ManCaveMade ESP-Live](images/devices/mancavemade-esp-live.jpg)|![Wemos D1 Mini Relay Shield](images/devices/wemos-d1-mini-relayshield.jpg)|![Witty Cloud](images/devices/witty-cloud.jpg)|
 |**ManCaveMade ESP-Live**|**Wemos D1 Mini Relay Shield**|**Witty Cloud**|
+|![Heltec Touch Relay](images/devices/heltec-touch-relay.jpg)|![Generic Relay v4.0](images/devices/generic-relay-40.jpg)|![Generic RGBLed v1.0](images/devices/generic-rgbled-10.jpg)|
+|**Heltec Touch Relay**|**Generic Relay v4.0**|**Generic RGBLed v1.0**|
 |||
 |**YJZK 2-gang switch**|**STM_RELAY**||
 

code/espurna/config/arduino.h

@@ -71,6 +71,9 @@
 //#define GREEN_ESP8266RELAY
 //#define IKE_ESPIKE
 //#define ARNIEX_SWIFITCH
+//#define GENERIC_ESP01SRELAY40
+//#define GENERIC_ESP01SRGBLED10
+//#define HELTEC_TOUCHRELAY
 
 //--------------------------------------------------------------------------------
 // Features (values below are non-default values)

code/espurna/config/hardware.h

@@ -1797,6 +1797,68 @@
     #define LED1_PIN              12 // D6
     #define LED1_PIN_INVERSE      1
 
+// -----------------------------------------------------------------------------
+// ESP-01S RELAY v4.0
+// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180404024035&SearchText=esp-01s+relay
+// -----------------------------------------------------------------------------
+
+#elif defined(GENERIC_ESP01SRELAY40)
+
+    // Info
+    #define MANUFACTURER        "GENERIC"
+    #define DEVICE              "ESP01S_RELAY_40"
+
+    // Relays
+    #define RELAY1_PIN          0
+    #define RELAY1_TYPE         RELAY_TYPE_NORMAL
+
+    // LEDs
+    #define LED1_PIN            2
+    #define LED1_PIN_INVERSE    0
+
+// -----------------------------------------------------------------------------
+// ESP-01S RGB LED v1.0 (some sold with ws2818)
+// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180404023816&SearchText=esp-01s+led+controller
+// -----------------------------------------------------------------------------
+
+#elif defined(GENERIC_ESP01SRGBLED10)
+
+    // Info
+    #define MANUFACTURER        "GENERIC"
+    #define DEVICE              "ESP01S_RGBLED_10"
+
+    // This board is sold as RGB LED module BUT it has on board 3 pin ph2.0 connector (VCC, GPIO2, GND)
+    // so, if you wish, you may connect LED, BUTTON, RELAY, SENSOR etc.
+
+    // Buttons
+    //#define BUTTON1_PIN         2
+
+    // Relays
+    //#define RELAY1_PIN          2
+
+    // LEDs
+    #define LED1_PIN            2
+
+// -----------------------------------------------------------------------------
+// Heltec Touch Relay
+// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180408043114&SearchText=esp8266+touch+relay
+// -----------------------------------------------------------------------------
+
+#elif defined(HELTEC_TOUCHRELAY)
+
+    // Info
+    #define MANUFACTURER        "HELTEC"
+    #define DEVICE              "TOUCH_RELAY"
+
+    // Buttons
+    #define BUTTON1_PIN         14
+    #define BUTTON1_RELAY       1
+    #define BUTTON1_MODE        BUTTON_PUSHBUTTON
+
+    // Relays
+    #define RELAY1_PIN          12
+    #define RELAY1_TYPE         RELAY_TYPE_NORMAL
+
 // -----------------------------------------------------------------------------
 // TEST boards (do not use!!)
 // -----------------------------------------------------------------------------

code/espurna/migrate.ino

@@ -843,11 +843,42 @@ void migrate() {
             setSetting("btnGPIO", 2, 13);
             setSetting("btnRelay", 2, 2);
             setSetting("relayGPIO", 0, 4);
-            setSetting("relayType", 0, RELAY_TYPE_INVERSE);
+            setSetting("relayType", 0, RELAY_TYPE_NORMAL);
             setSetting("relayGPIO", 1, 5);
-            setSetting("relayType", 1, RELAY_TYPE_INVERSE);
+            setSetting("relayType", 1, RELAY_TYPE_NORMAL);
             setSetting("relayGPIO", 2, 16);
-            setSetting("relayType", 2, RELAY_TYPE_INVERSE);
+            setSetting("relayType", 2, RELAY_TYPE_NORMAL);
+
+        #elif defined(ARNIEX_SWIFITCH)
+
+            setSetting("board", 64);
+            setSetting("ledGPIO", 0, 12);
+            setSetting("ledLogic", 0, 1);
+            setSetting("btnGPIO", 0, 4);
+            setSetting("btnRelay", 0, 1);
+            setSetting("relayGPIO", 0, 5);
+            setSetting("relayType", 0, RELAY_TYPE_INVERSE);
+
+        #elif defined(GENERIC_ESP01SRELAY40)
+
+            setSetting("board", 65);
+            setSetting("ledGPIO", 0, 2);
+            setSetting("ledLogic", 0, 0);
+            setSetting("relayGPIO", 0, 0);
+            setSetting("relayType", 0, RELAY_TYPE_NORMAL);
+
+        #elif defined(GENERIC_ESP01SRGBLED10)
+
+            setSetting("board", 66);
+            setSetting("ledGPIO", 0, 2);
+
+        #elif defined(HELTEC_TOUCHRELAY)
+
+            setSetting("board", 67);
+            setSetting("btnGPIO", 0, 14);
+            setSetting("btnRelay", 0, 1);
+            setSetting("relayGPIO", 0, 12);
+            setSetting("relayType", 0, RELAY_TYPE_NORMAL);
 
         #else
 

code/platformio.ini

@@ -4,12 +4,46 @@ src_dir = espurna
 data_dir = espurna/data
 
 [common]
-; platform = espressif8266@1.6.0
-platform = espressif8266@1.5.0
-build_flags = -g -DMQTT_MAX_PACKET_SIZE=400 ${env.ESPURNA_FLAGS}
+# ------------------------------------------------------------------------------
+# PLATFORM:
+#   !! DO NOT confuse platformio's Esp8266 development platform with Arduino core for ESP8266
+#
+#   we use platformIO 1.5.0 as default
+#   platform 1.6.0 = arduino core 2.4.0 is required for newer features/boards
+# ------------------------------------------------------------------------------
+platform_150 = espressif8266@1.5.0
+platform_160 = espressif8266@1.6.0
+platform = ${common.platform_150}
+
+# ------------------------------------------------------------------------------
+# FLAGS: DEBUG
+#
+# ------------------------------------------------------------------------------
 debug_flags = -DDEBUG_ESP_CORE -DDEBUG_ESP_SSL -DDEBUG_ESP_WIFI -DDEBUG_ESP_HTTP_CLIENT -DDEBUG_ESP_HTTP_UPDATE -DDEBUG_ESP_HTTP_SERVER -DDEBUG_ESP_UPDATER -DDEBUG_ESP_OTA -DDEBUG_TLS_MEM
+
+# ------------------------------------------------------------------------------
+# FLAGS: build flags
+#   build flags for 512k/1m ESP's are different because we use Linker Scripts to adjust flash split
+#   512 KB = 487 KB sketch, 20 KB eeprom
+#     1 MB = 999 KB sketch, 20 KB eeprom
+# ------------------------------------------------------------------------------
+build_flags = -g -DMQTT_MAX_PACKET_SIZE=400 ${env.ESPURNA_FLAGS}
 build_flags_512k = ${common.build_flags} -Wl,-Tesp8266.flash.512k0.ld
 build_flags_1m = ${common.build_flags} -Wl,-Tesp8266.flash.1m0.ld
+
+# ------------------------------------------------------------------------------
+# GLOBALS:
+# ------------------------------------------------------------------------------
+# IP address when using OTA
+upload_port = "192.168.4.1"
+upload_flags = --auth=fibonacci --port 8266
+#upload_port = "${env.ESPURNA_IP}"
+#upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+
+# ------------------------------------------------------------------------------
+# LIBRARIES: required dependencies
+#   Please note that we don't always use the latest version of a library.
+# ------------------------------------------------------------------------------
 lib_deps =
     ArduinoJson
     https://github.com/marvinroger/async-mqtt-client#v0.8.1
@@ -92,8 +126,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DWEMOS_D1_MINI_RELAYSHIELD -DDEBUG_FAUXMO=Serial -DNOWSAUTH
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 extra_scripts = ${common.extra_scripts}
 
 [env:nodemcu-lolin]
@@ -126,8 +160,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DNODEMCU_LOLIN -DDEBUG_FAUXMO=Serial -DNOWSAUTH
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -151,8 +185,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DTINKERMAN_ESPURNA_H06
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -174,8 +208,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DTINKERMAN_ESPURNA_H08
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -221,8 +255,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_BASIC
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -246,8 +280,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_BASIC -DDHT_SUPPORT=1
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -282,8 +316,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_RF
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -307,8 +341,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_TH
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -332,8 +366,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_POW
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -356,8 +390,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_DUAL
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-dual-r2]
@@ -379,8 +413,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_DUAL_R2
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 extra_scripts = ${common.extra_scripts}
 
 [env:itead-sonoff-4ch]
@@ -403,8 +437,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_4CH
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -428,8 +462,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_4CH_PRO
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -453,8 +487,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_TOUCH
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -478,8 +512,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_B1
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -503,8 +537,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_T1_1CH
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -528,8 +562,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_T1_2CH
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -553,8 +587,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_T1_3CH
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -578,8 +612,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_LED
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -603,8 +637,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_RFBRIDGE
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 19200
 extra_scripts = ${common.extra_scripts}
 
@@ -630,8 +664,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SLAMPHER
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -655,8 +689,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_S20
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -680,8 +714,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_1CH_INCHING
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -705,8 +739,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_MOTOR
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -729,8 +763,8 @@ board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_SONOFF_SV
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -754,8 +788,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DELECTRODRAGON_WIFI_IOT -DDHT_SUPPORT=1
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -779,8 +813,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DWORKCHOICE_ECOPLUG
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -802,8 +836,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DJANGOE_WIFI_RELAY_NC
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -825,8 +859,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DJANGOE_WIFI_RELAY_NO
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -848,8 +882,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DOPENENERGYMONITOR_MQTT_RELAY -DDALLAS_SUPPORT=1
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -871,8 +905,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DJORGEGARCIA_WIFI_RELAYS
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -896,8 +930,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DAITHINKER_AI_LIGHT
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -921,8 +955,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DMAGICHOME_LED_CONTROLLER
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -945,8 +979,8 @@ board_flash_mode = dout
 lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DMAGICHOME_LED_CONTROLLER_20
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -970,8 +1004,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DHUACANXING_H801
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -995,8 +1029,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DHUACANXING_H802
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1020,8 +1054,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DARILUX_AL_LC01
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1045,8 +1079,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DARILUX_AL_LC02
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1070,8 +1104,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DARILUX_AL_LC06
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1095,8 +1129,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DARILUX_AL_LC11
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1120,8 +1154,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = -g -Wl,-Tesp8266.flash.1m0.ld -DARILUX_E27
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1145,8 +1179,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DITEAD_BNSZ01
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1170,8 +1204,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DWION_50055
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1195,8 +1229,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DEXS_WIFI_RELAY_V31
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1219,8 +1253,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DGENERIC_V9261F
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1244,8 +1278,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DGENERIC_V9261F
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1268,8 +1302,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DGENERIC_ECH1560
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1293,8 +1327,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DGENERIC_ECH1560
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1317,8 +1351,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags} -DMANCAVEMADE_ESPLIVE
 upload_speed = 460800
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1342,8 +1376,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DINTERMITTECH_QUINLED
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1367,8 +1401,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DXENON_SM_PW702U
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1392,8 +1426,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DAUTHOMETION_LYT8266
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1417,8 +1451,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DKMC_70011
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1442,8 +1476,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DYJZK_SWITCH_2CH
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1574,8 +1608,8 @@ lib_deps = ${common.lib_deps}
 lib_ignore = ${common.lib_ignore}
 build_flags = ${common.build_flags_1m} -DSTM_RELAY
 upload_speed = 115200
-upload_port = "192.168.4.1"
-upload_flags = --auth=fibonacci --port 8266
+upload_port = ${common.upload_port}
+upload_flags = ${common.upload_flags}
 monitor_baud = 115200
 extra_scripts = ${common.extra_scripts}
 
@@ -1747,6 +1781,78 @@ upload_port = "${env.ESPURNA_IP}"
 upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
 extra_scripts = ${common.extra_scripts}
 
+[env:generic-esp01s-relay-40]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01SRELAY40
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
+[env:generic-esp01s-relay-40-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01SRELAY40
+upload_speed = 115200
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+extra_scripts = ${common.extra_scripts}
+
+[env:generic-esp01s-rgbled-10]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01SRGBLED10
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
+[env:generic-esp01s-rgbled-10-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DGENERIC_ESP01SRGBLED10
+upload_speed = 115200
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+extra_scripts = ${common.extra_scripts}
+
+[env:heltec-touch-relay]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DHELTEC_TOUCHRELAY
+monitor_baud = 115200
+extra_scripts = ${common.extra_scripts}
+
+[env:heltec-touch-relay-ota]
+platform = ${common.platform}
+framework = arduino
+board = esp01_1m
+board_flash_mode = dout
+lib_deps = ${common.lib_deps}
+lib_ignore = ${common.lib_ignore}
+build_flags = ${common.build_flags_1m} -DHELTEC_TOUCHRELAY
+upload_speed = 115200
+upload_port = "${env.ESPURNA_IP}"
+upload_flags = --auth=${env.ESPURNA_AUTH} --port 8266
+extra_scripts = ${common.extra_scripts}
+
 # ------------------------------------------------------------------------------
 # GENERIC OTA ENVIRONMENTS
 # ------------------------------------------------------------------------------