* wip

* cleanup buttons-through-serial code, remove hw mention from button module

* remove wip

* implement mqtt settings

* fixup struct members, dual no longer allocates debouncer

* add missing debounceevent lib

* fix missing event_handler, update names

* fix namespace

* drop lib

* fix int<->bool comparison

* Move gpio16 handling from DigitalPin to EventHandler

* Cleanup debounceevent headers

* Don't expect system headers to be included

* re 70b54c489f - no allocation, for real

* Adjust settings names

* dont retain by default

* unused

* typo

* Fix length type (ref 6017ad9474)

* Move pin class outside of debounce lib, lowercase ns

* move event handling inside of button_t

* refactor config. ..._MODE -> _CONFIG, ..._MODE_... -> ..._ACTION_...

* fix test

* naming

* move indexed value to header

* refactor actions into direct opts

* fix webui, fix buttons not respecting old user setting

* change button config format from bitmask to a struct, adjust settings conversion

* proxy some more header defautls, fix web kv

* gpiopin

* adjust webui func to support every setting

* clarify single-return event->string

* fix dual setting

* fix dual packet condition, de-duplicate funcs

* fix bogus warning

* Fixes and updates for thermostat and display:

- Switch to original esp8266-oled-ssd1306 library
- Fixes and updates for thermostat and display
- Add display switching off after interval
- If THERMOSTAT_DISPLAY_SUPPORT enabled, then one click enable display, long click switch relay. This functionality also depend on fix for long click. See pull request https://github.com/xoseperez/espurna/pull/2172

* Move buttons definitions for display to dependencies.h

* Pin ThingPulse/esp8266-oled-ssd1306#3398c97

- continue #2140 , use the correct implementation for http requests not confuse code readers with our parsing
- fix data sender data duplication, run build test
- add note that this is actually really RAM heavy, some connection failures are not easily distinguishable from any code errors and are simply OOM.

also
- fix arduinoota prototype error when building without it (... ino2cpp, again)
- add comment about 160mhz into the platformio.ini

* Thingspeak: cleanup

* fix sync client config, refactoring

* revert changes in tspk config

* inheritance

* fix empty wificlient

* Permit thingspeak urn edit

* Update thinkspeak.ino

* Update index.html

* Replace Host, Port, and URL with Address in Thingspeak

* Create AsyncThingspeak object

Create AsyncThingspeak object to contain the url of the component.

* replace pointer by class member

Thingspeak class improvement to answer Max's question:
why use a pointer when it can be a class member?
So now address parameter isn't a pointer anymore.

* Update Thingspeak address on post

* Config: remove prototypes.h

* fixup order

* word

* add missing

* fix warning while still using .ino

* bad at c/p;

* ntp: try using sntp app from lwip, drop ntpclientlib

* fix display

* thermostat: fix day and month getters

* test build sizes with scheduler

* use system timers for once-a-minute scheduling, no polling

* tick

* avoid timestamps, use tm

* drop utc rpn operator, add utc_hour and utc_dow

* try to build with old implementation too

* dep

* notify ws

* progmem

* cleanup types

* offset tm values by 1 to match existing schedules

* avoid using ntpclientlib with rpn

* test. show debug strings in sch

* fix secureclient

* consts, fix unsyncing when changing tz (and not triggering sntp after reinit for some reason)

* startup time in seconds

* same delay as lwip

* header

* assume build timestamp is unixtime

* cache server value

* fmt

* typo

* handle dhcp request

* rename

* web

* TZ.h

* add notice about what alias means

* fix disabling NTP_SUPPORT

* scheduled ticker

* same behaviour as old module

* rollback rpn dependency check, utc_ prefixes

* ...

* comments, refactor naming

- add ltDimmerGPIO<index> & ltDimmerInv<index> to override / add to hardware configuration. Add pin defaults, mapped as GPIO_NONE. pwm_init() receives resulting GPIO mapping based on settings loader.
- remove bogus _light_channels variable, use this name for channel array instead (...which is vector and has size(). functions always use that value anyway)

* Sensors: refactor configuration

- move sensor implementaion to the .ino,
  remove dependency undef / define from sensor files
- update test/build/sensor.h from SENSOR_SUPPORT
- allow to change sensor config variables externally
- `#include <...>` for global headers and libraries,
  fix relative path for math library

* add missing sns <-> i2c dependency

* ledrelay should return relay_none as default

* rollback to original test header

* include debug header when requested (relative)

- use similar to relay & wifi, configuration through helper methods that
  use indexed defines
- clock cycles for led delay polling
- button mode defaults

* debug: log mode, allow to skip boot messages

* typo, fix warning about unhandled switch

* mention telnet wifiserver & reverse changes

* PIO: remove -ota envs, handle OTA condition in extra script
* Tweak ESPURNA_BOARD variable
* Support git and latest in ota script
* Handle ESPURNA_FLAGS too
* Try to handle env and projenv in pylint
* Add deprecation comment about -ota envs
* regen arduino.h

* experimental: refactor get/set/del/hasSetting

* sensors

* lights

* cleaup

* r

* tuya

* fixup! sensors

* fixup! tuya

* header defaults types

* fix lights

* setup already checks for max

* helper for flashstring

* fix overload

* oops

* refactor includes

* warnings

* test with migrate

* add ids in a separate file

* cleanup

rev: crash

rev: domoticz

rev: encoder

rev: loopdelay

rev: hass

rev: i2c

rev2: hass

rev: mqtt

rev: rfm69

rev: relay

rev: rpn

rev: settings setup

rev: hb settings

rev: telnet preprocessor fix

rev: settings wrap

rev: tspk bool style

rev: wifi types

rev: util hb

rev: settings

fixup! rev: settings

* rev: cleanup wifi injections based on new getters

* hasSetting now can return true for empty key

* show hardcoded network in web

* oops

* fix ws referencing wrong index

* ensure empty strings are written

* c/p

* use experimental schema style for payload, mark network as not deletable

* allow to customize converter

* shorter syntax, try using with wifi

* use proper #if syntax to handle definitions that are missing

* fixup ota sc checks getter, cast schEnabled to bool

* add utils header to sensors

Not a match to same model from Neo Coolcam

* Fixed ignorance from the 16th PIN on ESP8266

* Added update to led every change of relay

* per https://github.com/xoseperez/espurna/pull/2110#discussion_r367551042

* gpio16 comment

Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>

* debug: store boot log

* order

* roll single header

* hide when not implemented

* fix capacity check

* dependencies

* refactor names, can just use malloc

* settings formatting

* dbgBuf prefix

* show size

* release memory after buffer is displayed

* fix uptime unused warning, combine printer

* comments

* use arg flag instead of static to handle boot

* ci test fix

* Hide whole info() without debug

* typo

* cleanup setDebugOutput condition

* add support for DELTACO SH-P01

* renaming deltaco_sh_le14w to deltaco_sh_lexxw

* add support Deltaco SH-P03USB and SH-LEXXRGB

* Add support for Kogan Smarter Home Plug With Energy Meter

Type: Power Plug
Board: Kogan Smarter Home Plug with Energy Meter
Build flag: KOGAN_SMARTER_HOME_PLUG_W_POW
Description: Power Plug with integrated Energy Meter
Baseboard: Tuya TYWE3S
Baseboard Data sheet: https://docs.tuya.com/docDetail?code=K8uhkbb1ihp8u

* Include Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW) into arduino.h

* Update platformio.ini to support Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW)

* Add Kogan Smarter Home plug with energy meter product image

* fix platformio.ini that was missing a '-ota' for the environment

* comment out device definition

* Make device name consistent with #define and platformio.ini

* Version 1.14.1

* fix autoreplace

* formatting

* Test: check core feature build

* order

* add missing

This LED strip is sold by ACTION in Germany and comes with a Tuya (TYWE3L) chip. It can be "freed" by using tuya-convert. It has (yet another) IR remote control that uses another set of codes. Which is added, too. The color codes are copies from SET 1 and 2.
I kind of think that they don't match my remote control but since i'm using my smart home system for controlling, i don't care enough to figure out the correct color codes.

The circuit board supports also a CW channel on PIN 5 (which is not used on by version), nevertheless I've added a comment in case anybody has a similar device with CW

* broker: drop REAL_TIME flag, use separate Broker entities

* influxdb: use async client, send data in batches

We have created a few dozens of devices, released as open-source hardware and
published the schematics to GitHub. We're planning to organize some small
(10-15 people) workshops on how to assemble, flash and configure these board.

https://github.com/eHomeDIY

* Add LinkSprite R4 def

* Platformio.ini def for linksprite r4

* LINKSPRITE_LINKNODE_R4

* web: revert changed from secure_client patch

* ota/httpupdate: use SecureClient

* ota/httpupdate: use scheduled function on mqtt event

* config: finish up 590282e changes + add warnings

* typo fix

* use bind instead of c++14 magic, use debug text from secureclient

* bump

* actually use the locking

- fix hardware.h weird encoding (todo: is there a git-attribute for
this to be peristent?)
- sort and add missing support and hw entries to the arduino.h
- force thermostat to depend on sensors to avoid confusing linker error

* add support for Hykker Smart Plug with power meter
Type: Power Plugs
Board: Hykker Power Plug
Build flag: HYKKER_POWER_PLUG
Description: Power plug w/ power metering

* Update arduino.h

hykker power plug

* Update platformio.ini

hykker power plug

* Type: Power Plugs
Board: Hykker Smart Home Power Plug
Build flag: HYKKER_SMART_HOME_POWER_PLUG
Description: Power plug w/ power metering

* voltage ratio calibration for correct results

* scripts: memanalyzer fixes

- cleanup duplication
- cleanup external dependencies
- properly use subprocess when calling pio, add debug mode
- cleanup argparse usage, use store_true actions instead of counters
- use python3 syntax and python3 shebang by default
- fix some issues with module dependencies

* move to scripts

* use simple return

* quick fix for rfm

* codacy unused import

* formatting

* show defaults

* while at it, rewrite to make pylint happy

* fix unused

* add windows support + note

- mask is defined as (relay# status << number)
- transparently handle base-2 and base-10 numbers
- if the relay mode requires us to save the mask, it will be saved as base-2

* sensor: add DHT_CHIP_SI7021 references

* sensor: update DHT_TYPE definitions, use enum

* changelog

- add experimental `relayDummy` to configure dummy relays at runtime
- add tuya-generic-dimmer #1729
- cleanup broker interface to allow Tuya module to properly receive events, modify broker methods to allow different function signatures
- add basic tests for Tuya frame and data protocol