* Add support for Kogan Smarter Home Plug With Energy Meter
Type: Power Plug
Board: Kogan Smarter Home Plug with Energy Meter
Build flag: KOGAN_SMARTER_HOME_PLUG_W_POW
Description: Power Plug with integrated Energy Meter
Baseboard: Tuya TYWE3S
Baseboard Data sheet: https://docs.tuya.com/docDetail?code=K8uhkbb1ihp8u
* Include Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW) into arduino.h
* Update platformio.ini to support Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW)
* Add Kogan Smarter Home plug with energy meter product image
* fix platformio.ini that was missing a '-ota' for the environment
* comment out device definition
* Make device name consistent with #define and platformio.ini
This LED strip is sold by ACTION in Germany and comes with a Tuya (TYWE3L) chip. It can be "freed" by using tuya-convert. It has (yet another) IR remote control that uses another set of codes. Which is added, too. The color codes are copies from SET 1 and 2.
I kind of think that they don't match my remote control but since i'm using my smart home system for controlling, i don't care enough to figure out the correct color codes.
The circuit board supports also a CW channel on PIN 5 (which is not used on by version), nevertheless I've added a comment in case anybody has a similar device with CW
We have created a few dozens of devices, released as open-source hardware and
published the schematics to GitHub. We're planning to organize some small
(10-15 people) workshops on how to assemble, flash and configure these board.
https://github.com/eHomeDIY
* web: revert changed from secure_client patch
* ota/httpupdate: use SecureClient
* ota/httpupdate: use scheduled function on mqtt event
* config: finish up 590282e changes + add warnings
* typo fix
* use bind instead of c++14 magic, use debug text from secureclient
* bump
* actually use the locking
* add support for Hykker Smart Plug with power meter
Type: Power Plugs
Board: Hykker Power Plug
Build flag: HYKKER_POWER_PLUG
Description: Power plug w/ power metering
* Update arduino.h
hykker power plug
* Update platformio.ini
hykker power plug
* Type: Power Plugs
Board: Hykker Smart Home Power Plug
Build flag: HYKKER_SMART_HOME_POWER_PLUG
Description: Power plug w/ power metering
* voltage ratio calibration for correct results
- add experimental `relayDummy` to configure dummy relays at runtime
- add tuya-generic-dimmer #1729
- cleanup broker interface to allow Tuya module to properly receive events, modify broker methods to allow different function signatures
- add basic tests for Tuya frame and data protocol
* utils/version: use git description token as version, add memoization
* pio: move extra scripts to a separate directory
* pio: add -DAPP_REVISION=... as local build flag
* travis: move build flags tests outside of hardware header
* mqtt: fix typo
* travis: use files instead of bundling test cases into script
* fixup! travis: use files instead of bundling test cases into script
* fix variable expansion, remove custom h at the end
* add ade7953 to sensors list
* custom.h path as variable
* shellcheck
* fix printf syntax, silent again
* fix bash 4.3 treating empty array as unset variable
* Stop updating SoftAP SSID and password when changing hostname and password via WebUI / settings `reload`:
https://gitter.im/tinkerman-cat/espurna?at=5d65418f49ac051923be1f06
* Show real ssid and psk values from the current sdk configuration instead of using getSetting
* `WIFI.STA` command
* Add Shelly 2.5
* Add ADE7953 sensor support
* Fix compilation
* Use only one instance
* WIP: Not working, I got StoreProhibited exception
* Fix exception
* Fix merge issues
* Apply request review changes
* declare struct before using it
* uninterruptible delay
* try optimized reg_size
* fix types
* Remove gpio 0 input in analog sensor
* Add energy to ADE7953, it is not finished yet
* Add new method to save energy with index
* Finish energy for ADE7953
* MQTT rewrite with SSL fixes
- Added Arduino MQTT library support (actively maintained)
- Added support for BearSSL (core >= 2.5)
- BearSSL validation: insecure, fingerprinting and CA validation
- AxTLS validation: insecure and fingerprinting
- Support MFLN in order to reduce heap usage
* Better header incl, fix building w/ no NTP_SUPPORT
* Clean up code, use DEBUG_MSG_P
* Fix compile error
* Core 2.6.0+ fixes
* fix env -> config, run travis04 job
* don't duplicate free heap in frag data, use single stats struct
* fix dtostrf warnings, bump buffer sizes
* ...and even less words for fragmentation stat
- update every dynamicjsonbuffer with fixed size constructor argument
- change to ws callback registration to use a class builder (just cosmetic)
- test multiple ws data callbacks for each module
- remove some of the static strings in favour of ws data callback
- improve sensor ws callback data size, remove duplicated strings
- use static buffer in wsDebugSend
- postpone wsSend until loop, implement wsPost to allow other modules to queue message callbacks. remove Ticker based ws callbacks for data
- update WebUI files
* initial ldscripts refactoring
* add missing menu options
* board for 2.3.0 and 2.4.2
* test with core 2.5.0
* typo
* ...same typo in other boards.local.txt
* generate boards.local.txt from common template
* Depend on file presence instead of platform version
* sdk selection
* Override only relevant entries
* generate ldscripts
* formatting
* unused
* fix section scope
* fix linker script comment and build getting stuck
* py2 compat
platformio from pip still does not support py3
* add TODO for py3
* chmod +x, remove leading newline
* comment with real spiffs size
* fixup! chmod +x, remove leading newline
* regenerate all ldscripts
* Preventive fix of spiffs_end calculation
* update arg parsing
* generate only 2.3.0 and latest
* readme for boards.local.txt
* Update ldscript readme
* unique flash sizes
* fix sub
* line break
* correct way to get framework path
* Alias for _FS_... symbols
* unused 2m1m1s
* bump?
* show travis logs
* ensure latest toolchain for travis
* check platform packages when building
- update file paths: .pioenvs -> .pio/build, .piolibdeps -> .pio/libdeps
- modify envs to use common settings
- enable shared libs in travis and ota scripts
* Update encoder
- import modified Encoder library
- customize minimum delta value
* minimum delta in header config
* fixup! minimum delta in header config
* fix dead code, actually use interrupts
* move static class methods to normal funcs, apply namespace
* drop hardcoded register use
- use peripheral api (see cores/esp8266/esp8266_peri.h)
- remove bitmask and register struct members
* add a note about changes
* fixup! add a note about changes
* Add support for MagicHome RGBWW LED strip
This adds support for MagicHome 5 channel LED strip. It is using ESP8285 board, labelled as ESP-M4, has 5 powerful MOSFETs (M3006D, up to 80A! continuous/160A peak) at 12-24V. They are driven by smaller transistors. Red LED is connected to 3.3V power supply, and can't be controller. Green LED is connected to GPIO. Pin mappings:
BTN IO0
R Q8 Q2 IO14
G Q6 Q3 IO12
B Q9 Q4 IO13
WW Q10 Q5 IO15
CW Q7 Q1 IO5
GREEN_LED IO2
Looks like the same board is used in another product which has support for RF remote, but mine doesn't, so I don't include RF config, if yours has it should be a simple copy/paste job to add it.
* Add config for push button
* Fix copy/paste mistake
* Turn on/off LEDs using the push button
Marcus Winkler
Aurélien Requiem
Max Prokhorov
Niek van der Maas
sehraf
Vencislav Atanasov
mpcusack
orrpan
Johannes Hörmann
reaper7
ealfaroc
Xose Pérez
Thomas Oeding
Antonio López Marín
Laine Walker-Avina
Sandeep Sirpatil
Michael Murton
Antonio López Marín
konsgn