This LED strip is sold by ACTION in Germany and comes with a Tuya (TYWE3L) chip. It can be "freed" by using tuya-convert. It has (yet another) IR remote control that uses another set of codes. Which is added, too. The color codes are copies from SET 1 and 2.
I kind of think that they don't match my remote control but since i'm using my smart home system for controlling, i don't care enough to figure out the correct color codes.
The circuit board supports also a CW channel on PIN 5 (which is not used on by version), nevertheless I've added a comment in case anybody has a similar device with CW
We have created a few dozens of devices, released as open-source hardware and
published the schematics to GitHub. We're planning to organize some small
(10-15 people) workshops on how to assemble, flash and configure these board.
https://github.com/eHomeDIY
- fix hardware.h weird encoding (todo: is there a git-attribute for
this to be peristent?)
- sort and add missing support and hw entries to the arduino.h
- force thermostat to depend on sensors to avoid confusing linker error
* add support for Hykker Smart Plug with power meter
Type: Power Plugs
Board: Hykker Power Plug
Build flag: HYKKER_POWER_PLUG
Description: Power plug w/ power metering
* Update arduino.h
hykker power plug
* Update platformio.ini
hykker power plug
* Type: Power Plugs
Board: Hykker Smart Home Power Plug
Build flag: HYKKER_SMART_HOME_POWER_PLUG
Description: Power plug w/ power metering
* voltage ratio calibration for correct results
- add experimental `relayDummy` to configure dummy relays at runtime
- add tuya-generic-dimmer #1729
- cleanup broker interface to allow Tuya module to properly receive events, modify broker methods to allow different function signatures
- add basic tests for Tuya frame and data protocol
* travis: move build flags tests outside of hardware header
* mqtt: fix typo
* travis: use files instead of bundling test cases into script
* fixup! travis: use files instead of bundling test cases into script
* fix variable expansion, remove custom h at the end
* add ade7953 to sensors list
* custom.h path as variable
* shellcheck
* fix printf syntax, silent again
* fix bash 4.3 treating empty array as unset variable
* Add Shelly 2.5
* Add ADE7953 sensor support
* Fix compilation
* Use only one instance
* WIP: Not working, I got StoreProhibited exception
* Fix exception
* Fix merge issues
* Apply request review changes
* declare struct before using it
* uninterruptible delay
* try optimized reg_size
* fix types
* Remove gpio 0 input in analog sensor
* Add energy to ADE7953, it is not finished yet
* Add new method to save energy with index
* Finish energy for ADE7953
- add httpupdate ota impelementation
- move async ota into a separate module
- support bearssl & axtls through wificlientsecure
- allow to disable arduino ide ota module
* Make compilation more flexible allowing to define in custom.h your own variation to devices and define four wifi networks
* Implement suggestion from Max Prokhorov, it's simpler and cleaner
* Change a #elif by #else
* Move ESPurna Core comment
* Update encoder
- import modified Encoder library
- customize minimum delta value
* minimum delta in header config
* fixup! minimum delta in header config
* fix dead code, actually use interrupts
* move static class methods to normal funcs, apply namespace
* drop hardcoded register use
- use peripheral api (see cores/esp8266/esp8266_peri.h)
- remove bitmask and register struct members
* add a note about changes
* fixup! add a note about changes
* Add support for MagicHome RGBWW LED strip
This adds support for MagicHome 5 channel LED strip. It is using ESP8285 board, labelled as ESP-M4, has 5 powerful MOSFETs (M3006D, up to 80A! continuous/160A peak) at 12-24V. They are driven by smaller transistors. Red LED is connected to 3.3V power supply, and can't be controller. Green LED is connected to GPIO. Pin mappings:
BTN IO0
R Q8 Q2 IO14
G Q6 Q3 IO12
B Q9 Q4 IO13
WW Q10 Q5 IO15
CW Q7 Q1 IO5
GREEN_LED IO2
Looks like the same board is used in another product which has support for RF remote, but mine doesn't, so I don't include RF config, if yours has it should be a simple copy/paste job to add it.
* Add config for push button
* Fix copy/paste mistake
* Turn on/off LEDs using the push button
Button is not visible from the outside, but can be wired outside or made more accessible by using a thin object, so it feels more like a button than a hole. The configuration should not cause issues if the button is not used at all.
* add support for JINVOO VALVE SM-AW713
* add support for JINVOO VALVE SM-AW713
* add support for JINVOO VALVE SM-AW713
* add support for JINVOO VALVE SM-AW713
Type: Other
Board: Jinvoo SM-AW713
Build flag: JINVOO_VALVE_SM_AW713
Description: motorized valve
* fix typo
- remove optional RFRAW_SUPPORT
- enable module when RF_SUPPORT=1, optionally enable RCSwitch
- reorder ifdef checks to treat RFB_DIRECT and old RF_SUPPORT the same
- rename RF_PIN to RFB_RX_PIN
- depend on RF_SUPPORT instead of ITEAD_SONOFF_RFBRIDGE
- runtime TX & RX PIN setting
Max Prokhorov
sehraf
Vencislav Atanasov
mpcusack
orrpan
Johannes Hörmann
reaper7
ealfaroc
Xose Pérez
Thomas Oeding
Antonio López Marín
Pavel S
Laine Walker-Avina
Sandeep Sirpatil
Michael Murton
Antonio López Marín
konsgn
Rui Caridade
Colin Shorts
irmishappy
Ctrl-F4
Zebble