* update platformio.ini comments
* espurna-base -> espurna-core-webui
* esp8266-<flavour>-<size>-base -> esp8266-<size>-<flavour>-base
* clean-up ESPURNA_CORE detection, use boards function

* base envs

* CI: speed up release process (since we still want some .bin files)

* fixup! CI: speed up release process (since we still want some .bin files)

* release dry run

* fixup! release dry run

* adjust

* fix .bin name

* it works

* minor cleanup for current git

* use pio suggestion about ldscript, reduce build_flags impact

* fix linker

* parse ${vars} instead of ignoring them

* add filtering and override file (sneak peak into tasmota's pio config)

* don't generate secure client (for now)

* formatting

* codacy

* correct Gosund WP3 led color documentation; provide reasonable default actions for button and the two LEDs

* reverse red/blue led roles, as requested, to be consistent with other existing products

Co-authored-by: ziggurat29 <xxx@yyy.zzz>

Co-authored-by: ziggurat29 <xxx@yyy.zzz>

https://github.com/xoseperez/espurna/pull/2185#issuecomment-601198322
-11KiB

Co-authored-by: ziggurat29 <xxx@yyy.zzz>

* wip

* cleanup buttons-through-serial code, remove hw mention from button module

* remove wip

* implement mqtt settings

* fixup struct members, dual no longer allocates debouncer

* add missing debounceevent lib

* fix missing event_handler, update names

* fix namespace

* drop lib

* fix int<->bool comparison

* Move gpio16 handling from DigitalPin to EventHandler

* Cleanup debounceevent headers

* Don't expect system headers to be included

* re 70b54c489f - no allocation, for real

* Adjust settings names

* dont retain by default

* unused

* typo

* Fix length type (ref 6017ad9474)

* Move pin class outside of debounce lib, lowercase ns

* move event handling inside of button_t

* refactor config. ..._MODE -> _CONFIG, ..._MODE_... -> ..._ACTION_...

* fix test

* naming

* move indexed value to header

* refactor actions into direct opts

* fix webui, fix buttons not respecting old user setting

* change button config format from bitmask to a struct, adjust settings conversion

* proxy some more header defautls, fix web kv

* gpiopin

* adjust webui func to support every setting

* clarify single-return event->string

* fix dual setting

* fix dual packet condition, de-duplicate funcs

* fix bogus warning

* Config: remove prototypes.h

* fixup order

* word

* add missing

* fix warning while still using .ino

* bad at c/p;

- use similar to relay & wifi, configuration through helper methods that
  use indexed defines
- clock cycles for led delay polling
- button mode defaults

Not a match to same model from Neo Coolcam

* add support for DELTACO SH-P01

* renaming deltaco_sh_le14w to deltaco_sh_lexxw

* add support Deltaco SH-P03USB and SH-LEXXRGB

* Add support for Kogan Smarter Home Plug With Energy Meter

Type: Power Plug
Board: Kogan Smarter Home Plug with Energy Meter
Build flag: KOGAN_SMARTER_HOME_PLUG_W_POW
Description: Power Plug with integrated Energy Meter
Baseboard: Tuya TYWE3S
Baseboard Data sheet: https://docs.tuya.com/docDetail?code=K8uhkbb1ihp8u

* Include Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW) into arduino.h

* Update platformio.ini to support Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW)

* Add Kogan Smarter Home plug with energy meter product image

* fix platformio.ini that was missing a '-ota' for the environment

* comment out device definition

* Make device name consistent with #define and platformio.ini

This LED strip is sold by ACTION in Germany and comes with a Tuya (TYWE3L) chip. It can be "freed" by using tuya-convert. It has (yet another) IR remote control that uses another set of codes. Which is added, too. The color codes are copies from SET 1 and 2.
I kind of think that they don't match my remote control but since i'm using my smart home system for controlling, i don't care enough to figure out the correct color codes.

The circuit board supports also a CW channel on PIN 5 (which is not used on by version), nevertheless I've added a comment in case anybody has a similar device with CW

We have created a few dozens of devices, released as open-source hardware and
published the schematics to GitHub. We're planning to organize some small
(10-15 people) workshops on how to assemble, flash and configure these board.

https://github.com/eHomeDIY

* Add LinkSprite R4 def

* Platformio.ini def for linksprite r4

* LINKSPRITE_LINKNODE_R4

- fix hardware.h weird encoding (todo: is there a git-attribute for
this to be peristent?)
- sort and add missing support and hw entries to the arduino.h
- force thermostat to depend on sensors to avoid confusing linker error

* add support for Hykker Smart Plug with power meter
Type: Power Plugs
Board: Hykker Power Plug
Build flag: HYKKER_POWER_PLUG
Description: Power plug w/ power metering

* Update arduino.h

hykker power plug

* Update platformio.ini

hykker power plug

* Type: Power Plugs
Board: Hykker Smart Home Power Plug
Build flag: HYKKER_SMART_HOME_POWER_PLUG
Description: Power plug w/ power metering

* voltage ratio calibration for correct results

* sensor: add DHT_CHIP_SI7021 references

* sensor: update DHT_TYPE definitions, use enum

* changelog

- add experimental `relayDummy` to configure dummy relays at runtime
- add tuya-generic-dimmer #1729
- cleanup broker interface to allow Tuya module to properly receive events, modify broker methods to allow different function signatures
- add basic tests for Tuya frame and data protocol

* RPN rules (WIP)

* RPN rules web interface, MQTT inputs

* Stickyness, rpn.ops,...

* Perform light updates only when value changes

* Improve wsSend performance

* Revert PR test

* Check TERMINAL_SUPPORT for _rpnInitCommands and remove unused variable

* Fix merge

* formatting

* disable by default (?)

* changelog

* comment

* remove debug function wrappers in favour of var activation

* fixup! comment

* Adding support for miobulb001

* Add miobulb001 images

* defined MUVIT_IO_MIOBULB001

* Update platformio.ini

revert default env
use dashes

* typo

* typo

* travis: move build flags tests outside of hardware header

* mqtt: fix typo

* travis: use files instead of bundling test cases into script

* fixup! travis: use files instead of bundling test cases into script

* fix variable expansion, remove custom h at the end

* add ade7953 to sensors list

* custom.h path as variable

* shellcheck

* fix printf syntax, silent again

* fix bash 4.3 treating empty array as unset variable

Control board for Hoermann UAP1 Garage interface
http://frank-schuetz.de/index.php/fhem/13-hoermann-torantrieb-mit-espeasy-in-fhem-einbinden

* Add Shelly 2.5

* Add ADE7953 sensor support

* Fix compilation

* Use only one instance

* WIP: Not working, I got StoreProhibited exception

* Fix exception

* Fix merge issues

* Apply request review changes

* declare struct before using it

* uninterruptible delay

* try optimized reg_size

* fix types

* Remove gpio 0 input in analog sensor

* Add energy to ADE7953, it is not finished yet

* Add new method to save energy with index

* Finish energy for ADE7953

- add httpupdate ota impelementation
- move async ota into a separate module
- support bearssl & axtls through wificlientsecure
- allow to disable arduino ide ota module

* enable multiple Digital, Events & PulseMeter

* delete SPI dependency

* back to only one PulseMeter

* deprecared pins

*  * Added support for Etekcity ESW01-USA device

* Update hardware.h

* Update hardware.h

Signed-off-by: Michael Murton <6764025+CrazyIvan359@users.noreply.github.com>

* Add Shelly 1PM

* Improve Shelly 1PM temperature tabs

* Add shelly 1pm button

* adding Nexete

Started Adding Nexete A19 Bulb

* Update hardware.h

* fixed pinout

* Rename to Nexete_A19 + added non-ota

* Make compilation more flexible allowing to define in custom.h your own variation to devices and define four wifi networks

* Implement suggestion from Max Prokhorov, it's simpler and cleaner

* Change a #elif by #else

* Move ESPurna Core comment

* Update encoder

- import modified Encoder library
- customize minimum delta value

* minimum delta in header config

* fixup! minimum delta in header config

* fix dead code, actually use interrupts

* move static class methods to normal funcs, apply namespace

* drop hardcoded register use

- use peripheral api (see cores/esp8266/esp8266_peri.h)
- remove bitmask and register struct members

* add a note about changes

* fixup! add a note about changes

* Add support for MagicHome RGBWW LED strip

This adds support for MagicHome 5 channel LED strip. It is using ESP8285 board, labelled as ESP-M4, has 5 powerful MOSFETs (M3006D, up to 80A! continuous/160A peak) at 12-24V. They are driven by smaller transistors. Red LED is connected to 3.3V power supply, and can't be controller. Green LED is connected to GPIO. Pin mappings:
BTN IO0
R Q8 Q2 IO14
G Q6 Q3 IO12
B Q9 Q4 IO13
WW Q10 Q5 IO15
CW Q7 Q1 IO5
GREEN_LED IO2
Looks like the same board is used in another product which has support for RF remote, but mine doesn't, so I don't include RF config, if yours has it should be a simple copy/paste job to add it.

* Add config for push button

* Fix copy/paste mistake

* Turn on/off LEDs using the push button