Add support for BME680 using libalgobsec proprietary algorithms for precise Indoor Air Quality (IAQ) measurement. Unlike traditional CO2 sensors - and good ones are expensive - it measures nearly all VOCs compounds in the air (plus other gases) and compensates those measurements with its built-in temperature and humidity sensors to determine indoor air quality.
Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>
- replace `apmode` with `wifiApMode`
- deprecate `WIFI_FALLBACK_APMODE` in favour of the AP mode setting
- allow to set custom SSID and passphrase for the softAP via `wifiApSsid` & `wifiApPass`
- identifier fallback for hostname
* wip based on early draft. todo benchmarking
* fixup eraser, assume keys are unique
* fix cursor copy, test removal at random
* small benchmark via permutations. todo lambdas and novirtual
* fix empty condition / reset
* overwrite optimizations, fix move offsets overflows
* ...erase using 0xff instead of 0
* test the theory with code, different length kv were bugged
* try to check for out-of-bounds writes / reads
* style
* trying to fix mover again
* clarify length, defend against reading len on edge
* fix uncommited rewind change
* prove space assumptions
* more concise traces, fix move condition (agrh!!!)
* slightly more internal knowledge (estimates API?)
* make sure cursor is only valid within the range
* ensure 0 does not blow things
* go back up
* cursor comments
* comments
* rewrite writes through cursor
* in del too
* estimate kv storage requirements, return available size
* move raw erase / move into a method, allow ::set to avoid scanning storage twice
* refactor naming, use in code
* amend storage slicing test
* fix crash handler offsets, cleanup configuration
* start -> begin
* eeprom readiness
* dependencies
* unused
* SPI_FLASH constants for older Core
* vtables -> templates
* less include dependencies
* gcov help, move estimate outside of the class
* writer position can never match, use begin + offset
* tweak save_crash to trigger only once in a serious crash
* doh, header function should be inline
* foreach api, tweak structs for public api
* use test helper class
* when not using foreach, move cursor reset closer to the loop using read_kv
* coverage comments, fix typo in tests decltype
* ensure set() does not break with offset
* make codacy happy again
Change the underlying command line handling:
- switch to a custom parser, inspired by redis / sds
- update terminalRegisterCommand signature, pass only bare minimum
- clean-up `help` & `commands`. update settings `set`, `get` and `del`
- allow our custom test suite to run command-line tests
- clean-up Stream IO to allow us to print large things into debug stream (for example, `eeprom.dump`)
- send parsing errors to the debug log
As a proof of concept, introduce `TERMINAL_MQTT_SUPPORT` and `TERMINAL_WEB_API_SUPPORT`
- MQTT subscribes to the `<root>/cmd/set` and sends response to the `<root>/cmd`. We can't output too much, as we don't have any large-send API.
- Web API listens to the `/api/cmd?apikey=...&line=...` (or PUT, params inside the body). This one is intended as a possible replacement of the `API_SUPPORT`. Internals introduce a 'task' around the AsyncWebServerRequest object that will simulate what WiFiClient does and push data into it continuously, switching between CONT and SYS.
Both are experimental. We only accept a single command and not every command is updated to use Print `ctx.output` object. We are also somewhat limited by the Print / Stream overall, perhaps I am overestimating the usefulness of Arduino compatibility to such an extent :)
Web API handler can also sometimes show only part of the result, whenever the command tries to yield() by itself waiting for something. Perhaps we would need to create a custom request handler for that specific use-case.
This will add support for the KingArt Wifi Curtain Switch. There are no buttons in the web interface as I could not figure out how to create them (any help on that is welcome).
For now the switch can be controlled over MQTT:
"{hostname}/curtain/set"
"{hostname}/curtain"
* Fixes and updates for thermostat and display:
- Switch to original esp8266-oled-ssd1306 library
- Fixes and updates for thermostat and display
- Add display switching off after interval
- If THERMOSTAT_DISPLAY_SUPPORT enabled, then one click enable display, long click switch relay. This functionality also depend on fix for long click. See pull request https://github.com/xoseperez/espurna/pull/2172
* Move buttons definitions for display to dependencies.h
* Pin ThingPulse/esp8266-oled-ssd1306#3398c97
- continue #2140 , use the correct implementation for http requests not confuse code readers with our parsing
- fix data sender data duplication, run build test
- add note that this is actually really RAM heavy, some connection failures are not easily distinguishable from any code errors and are simply OOM.
also
- fix arduinoota prototype error when building without it (... ino2cpp, again)
- add comment about 160mhz into the platformio.ini
* Permit thingspeak urn edit
* Update thinkspeak.ino
* Update index.html
* Replace Host, Port, and URL with Address in Thingspeak
* Create AsyncThingspeak object
Create AsyncThingspeak object to contain the url of the component.
* replace pointer by class member
Thingspeak class improvement to answer Max's question:
why use a pointer when it can be a class member?
So now address parameter isn't a pointer anymore.
* Update Thingspeak address on post
* ntp: try using sntp app from lwip, drop ntpclientlib
* fix display
* thermostat: fix day and month getters
* test build sizes with scheduler
* use system timers for once-a-minute scheduling, no polling
* tick
* avoid timestamps, use tm
* drop utc rpn operator, add utc_hour and utc_dow
* try to build with old implementation too
* dep
* notify ws
* progmem
* cleanup types
* offset tm values by 1 to match existing schedules
* avoid using ntpclientlib with rpn
* test. show debug strings in sch
* fix secureclient
* consts, fix unsyncing when changing tz (and not triggering sntp after reinit for some reason)
* startup time in seconds
* same delay as lwip
* header
* assume build timestamp is unixtime
* cache server value
* fmt
* typo
* handle dhcp request
* rename
* web
* TZ.h
* add notice about what alias means
* fix disabling NTP_SUPPORT
* scheduled ticker
* same behaviour as old module
* rollback rpn dependency check, utc_ prefixes
* ...
* comments, refactor naming
* Sensors: refactor configuration
- move sensor implementaion to the .ino,
remove dependency undef / define from sensor files
- update test/build/sensor.h from SENSOR_SUPPORT
- allow to change sensor config variables externally
- `#include <...>` for global headers and libraries,
fix relative path for math library
* add missing sns <-> i2c dependency
* ledrelay should return relay_none as default
* rollback to original test header
* include debug header when requested (relative)
* debug: store boot log
* order
* roll single header
* hide when not implemented
* fix capacity check
* dependencies
* refactor names, can just use malloc
* settings formatting
* dbgBuf prefix
* show size
* release memory after buffer is displayed
* fix uptime unused warning, combine printer
* comments
* use arg flag instead of static to handle boot
* ci test fix
* Hide whole info() without debug
* typo
* cleanup setDebugOutput condition
This LED strip is sold by ACTION in Germany and comes with a Tuya (TYWE3L) chip. It can be "freed" by using tuya-convert. It has (yet another) IR remote control that uses another set of codes. Which is added, too. The color codes are copies from SET 1 and 2.
I kind of think that they don't match my remote control but since i'm using my smart home system for controlling, i don't care enough to figure out the correct color codes.
The circuit board supports also a CW channel on PIN 5 (which is not used on by version), nevertheless I've added a comment in case anybody has a similar device with CW
- mask is defined as (relay# status << number)
- transparently handle base-2 and base-10 numbers
- if the relay mode requires us to save the mask, it will be saved as base-2
- add experimental `relayDummy` to configure dummy relays at runtime
- add tuya-generic-dimmer #1729
- cleanup broker interface to allow Tuya module to properly receive events, modify broker methods to allow different function signatures
- add basic tests for Tuya frame and data protocol
* Use generic typechecks, OTA add followRedirects
* revamp using is_detected
* relative include
* mention ts draft instead, fix c++17 includes (still not buildable)
* typo
* Always create WiFiClient pointer
* Remove old CREATE_CHECK macro
* do not create wificlient obj when running old Core
* Added restore last schedule support
* Merged RestoreLastScheduleState function into the _schCheck function
* handle lights in restore action
* hide webui chbox when not using scheduler
* use settings instead of struct member, hide under ifdef scheduler_support
* relayLastSchedule uses SCHEDULER_RESTORE_LAST_SCHEDULE as default
* Changed all the variable names to be the same so there would be no confusions
* Fixed client side to create an array from relayLastschedule
* Fixed cosmetic issue with the toggle display in webui
* Fixed variable name and disabled comparison at the end
* Added another check if the switch type is light provider
* Changed variables naming
* Naming mistake
* telnet: buffered output for async server
* telnet: make async buffer an option
* just use the queue containers directly
* try with simpler list
* exhaust buffers as much as possible in a single try
* don't forget to destroy the client object
* naming
* kill the connection earlier
* fix merge issues
- customize relay TOGGLE payload
- match payload string when receiving mqtt status message
- reference enum values instead of raw integers, spell out intended status
- remove dead code
amend #1885, capitalize `relayPayload...` suffix instead of using uppercase
add `relayPayloadToggle`
- remove "platform" key, see #1440. this implicitly sets schema to "basic". pending some other clean-up regarding json and mqtt queueing, other schema can be added down the line
- updated ws module queue elem to capture callbacks list, allows to pass more than one callback (for example, when they are generated on the fly as lambdas, see ha wsPost usage)
- modified method to send ha config to use global ws queue, fix#1762 problem with empty topics and ensure json allocation is consistent.
- use existing defines to set mqtt payload options. amend #1085, #1188, #1883 to use the set payload value. drop HOMEASSISTANT_PAYLOAD... defines.
- update MQTT_STATUS_ONLINE/OFFLINE and RELAY_MQTT_ON/OFF with runtime configuration
- filter payload strings so that the resulting yaml value is not interpreted as bool (python True, False)
- helper method for settings to streamline string values manipulation
* test: etharp_gratuitous
* proper checks before calling etharp_gratuitous, move includes
* disable at runtime
* ms values
* reload
* debug
* reword
* filter by ifnum instead of checking for AP mode
* drop station_if check
2.3.0/lwip1 builds netif->num increments on for each sta or ap
lwip2 keeps those constant, but that seems like a implementation detail
might break in the future anyways...
* Light: proper printf format for HSV, use lround
* core: warn about map() and 2.3.0, type-strict constrain()
* use generic format
* value already has brightness
* MQTT rewrite with SSL fixes
- Added Arduino MQTT library support (actively maintained)
- Added support for BearSSL (core >= 2.5)
- BearSSL validation: insecure, fingerprinting and CA validation
- AxTLS validation: insecure and fingerprinting
- Support MFLN in order to reduce heap usage
* Better header incl, fix building w/ no NTP_SUPPORT
* Clean up code, use DEBUG_MSG_P
* Fix compile error
* Core 2.6.0+ fixes
* fix env -> config, run travis04 job
* don't duplicate free heap in frag data, use single stats struct
* fix dtostrf warnings, bump buffer sizes
* ...and even less words for fragmentation stat
- add httpupdate ota impelementation
- move async ota into a separate module
- support bearssl & axtls through wificlientsecure
- allow to disable arduino ide ota module
* Telnet rewrite, no longer using ESPAsyncTCP
* Support two telnet server implementations
* Clean up diff
* Update types, no free() calls, cleanup
* Use std::unique_ptr
* Fix nullptr checks
* Fix double log with async server
* Common new connection method
* use same connected() check as sync variant
* fixup! use same connected() check as sync variant
* Fix compile issue, close connection in case of timeout and when max connections reached
* Use AyncsClient* in function call
* Allow overriding telnet port + max clients
* Do not allocate 512 bytes by default
* Use TERMINAL_BUFFER_SIZE
Rui Marinho
dpeddi
Max Prokhorov
Albert Weterings
DmitryBlinov
Sammy BAUER
sehraf
Niek van der Maas
foxman69