* Sensors: refactor configuration

- move sensor implementaion to the .ino,
  remove dependency undef / define from sensor files
- update test/build/sensor.h from SENSOR_SUPPORT
- allow to change sensor config variables externally
- `#include <...>` for global headers and libraries,
  fix relative path for math library

* add missing sns <-> i2c dependency

* ledrelay should return relay_none as default

* rollback to original test header

* include debug header when requested (relative)

- use similar to relay & wifi, configuration through helper methods that
  use indexed defines
- clock cycles for led delay polling
- button mode defaults

* debug: log mode, allow to skip boot messages

* typo, fix warning about unhandled switch

* mention telnet wifiserver & reverse changes

* PIO: remove -ota envs, handle OTA condition in extra script
* Tweak ESPURNA_BOARD variable
* Support git and latest in ota script
* Handle ESPURNA_FLAGS too
* Try to handle env and projenv in pylint
* Add deprecation comment about -ota envs
* regen arduino.h

* experimental: refactor get/set/del/hasSetting

* sensors

* lights

* cleaup

* r

* tuya

* fixup! sensors

* fixup! tuya

* header defaults types

* fix lights

* setup already checks for max

* helper for flashstring

* fix overload

* oops

* refactor includes

* warnings

* test with migrate

* add ids in a separate file

* cleanup

rev: crash

rev: domoticz

rev: encoder

rev: loopdelay

rev: hass

rev: i2c

rev2: hass

rev: mqtt

rev: rfm69

rev: relay

rev: rpn

rev: settings setup

rev: hb settings

rev: telnet preprocessor fix

rev: settings wrap

rev: tspk bool style

rev: wifi types

rev: util hb

rev: settings

fixup! rev: settings

* rev: cleanup wifi injections based on new getters

* hasSetting now can return true for empty key

* show hardcoded network in web

* oops

* fix ws referencing wrong index

* ensure empty strings are written

* c/p

* use experimental schema style for payload, mark network as not deletable

* allow to customize converter

* shorter syntax, try using with wifi

* use proper #if syntax to handle definitions that are missing

* fixup ota sc checks getter, cast schEnabled to bool

* add utils header to sensors

Not a match to same model from Neo Coolcam

* Fixed ignorance from the 16th PIN on ESP8266

* Added update to led every change of relay

* per https://github.com/xoseperez/espurna/pull/2110#discussion_r367551042

* gpio16 comment

Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>

* debug: store boot log

* order

* roll single header

* hide when not implemented

* fix capacity check

* dependencies

* refactor names, can just use malloc

* settings formatting

* dbgBuf prefix

* show size

* release memory after buffer is displayed

* fix uptime unused warning, combine printer

* comments

* use arg flag instead of static to handle boot

* ci test fix

* Hide whole info() without debug

* typo

* cleanup setDebugOutput condition

* add support for DELTACO SH-P01

* renaming deltaco_sh_le14w to deltaco_sh_lexxw

* add support Deltaco SH-P03USB and SH-LEXXRGB

* Add support for Kogan Smarter Home Plug With Energy Meter

Type: Power Plug
Board: Kogan Smarter Home Plug with Energy Meter
Build flag: KOGAN_SMARTER_HOME_PLUG_W_POW
Description: Power Plug with integrated Energy Meter
Baseboard: Tuya TYWE3S
Baseboard Data sheet: https://docs.tuya.com/docDetail?code=K8uhkbb1ihp8u

* Include Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW) into arduino.h

* Update platformio.ini to support Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW)

* Add Kogan Smarter Home plug with energy meter product image

* fix platformio.ini that was missing a '-ota' for the environment

* comment out device definition

* Make device name consistent with #define and platformio.ini

* Version 1.14.1

* fix autoreplace

* formatting

* Test: check core feature build

* order

* add missing

* webui: improve updater error message

* ota: properly check updater state and finalize on errors

* finish up ota handling refactor

* fail web upgrade when cannot find magic byte

* send updater status with no payload arg and always send payload with

* mention magic byte and flash mode in webui

* gzip magic

* make async ota at least usable. timeouts, show errors, try harder to find data after headers

* simplify setup and destruction

* cleanup class instantiations for ota and url

* handle default case of magicflashchipsize

* shorter

* blobs

* web: fix rfb node generator syntax, do not send as basic settings

* ha: allocate discovery object later

- use setOriginalsFromValues function right after elements had changed and
**only** with those elements
- add checkbox handling to setOriginalsFromValues to match hasChanged
- apply hasChanged after value is set to refresh originals after saving
- change parts that already set 'original' attribute manually

This was sort-of broken, because original attr never worked as intended. 
Also fix possible OOM for large WebUI images, since sending full config each time means that we need more memory to buffer and parse it.

This LED strip is sold by ACTION in Germany and comes with a Tuya (TYWE3L) chip. It can be "freed" by using tuya-convert. It has (yet another) IR remote control that uses another set of codes. Which is added, too. The color codes are copies from SET 1 and 2.
I kind of think that they don't match my remote control but since i'm using my smart home system for controlling, i don't care enough to figure out the correct color codes.

The circuit board supports also a CW channel on PIN 5 (which is not used on by version), nevertheless I've added a comment in case anybody has a similar device with CW

This reverts commit 7efaaa8a80.

* broker: drop REAL_TIME flag, use separate Broker entities

* influxdb: use async client, send data in batches

We have created a few dozens of devices, released as open-source hardware and
published the schematics to GitHub. We're planning to organize some small
(10-15 people) workshops on how to assemble, flash and configure these board.

https://github.com/eHomeDIY

* Add LinkSprite R4 def

* Platformio.ini def for linksprite r4

* LINKSPRITE_LINKNODE_R4

- fix colorpicker variable name
- var msg and var pre for debug messages
- add gpio16 to gpio list, remove unused template code
- fix lightfox endif matching rfbridge instead of lightfox
- formatting

* web: revert changed from secure_client patch

* ota/httpupdate: use SecureClient

* ota/httpupdate: use scheduled function on mqtt event

* config: finish up 590282e changes + add warnings

* typo fix

* use bind instead of c++14 magic, use debug text from secureclient

* bump

* actually use the locking

- fix hardware.h weird encoding (todo: is there a git-attribute for
this to be peristent?)
- sort and add missing support and hw entries to the arduino.h
- force thermostat to depend on sensors to avoid confusing linker error

* add support for Hykker Smart Plug with power meter
Type: Power Plugs
Board: Hykker Power Plug
Build flag: HYKKER_POWER_PLUG
Description: Power plug w/ power metering

* Update arduino.h

hykker power plug

* Update platformio.ini

hykker power plug

* Type: Power Plugs
Board: Hykker Smart Home Power Plug
Build flag: HYKKER_SMART_HOME_POWER_PLUG
Description: Power plug w/ power metering

* voltage ratio calibration for correct results

* scripts: memanalyzer fixes

- cleanup duplication
- cleanup external dependencies
- properly use subprocess when calling pio, add debug mode
- cleanup argparse usage, use store_true actions instead of counters
- use python3 syntax and python3 shebang by default
- fix some issues with module dependencies

* move to scripts

* use simple return

* quick fix for rfm

* codacy unused import

* formatting

* show defaults

* while at it, rewrite to make pylint happy

* fix unused

* add windows support + note