Namespace build configurations of modules, make more things into constexpr
(not fully finished though)
Unify code using ...Count() to parse IDs
Avoid using unsigned char aka uint8_t as index, prefer size_t
as most code already uses it anyway. Making sure we never accidentally
truncate the value or try to read it as 32bit-wide. Also, simplify
access to built in containers, since those use the wide type as well.
Renames led and button types, more consistent initialization and field access.
Make gamma & invert flags only apply to the transition itself.
Revert to previous behaviour, where the modified value is only ever seen
by the provider function.
- clamp values via helper functions
- unify channel access as long
slightly more ram, but we no longer cast values that are 32bit-wide anyway
- remove css option, send unconditionally as /hex
- reimplement hsv conversion functions (based on HA / python's colorsys)
simplify calculations and allow to return standalone value structs for
RGB and HSV
- named channel accessors
- implement HA color inputs / outputs
Make sure 'custom provider' `lightAdd()` scheduled function locks further channel modifications,
and take care of light sanity checks before the light update is even scheduled.
Reworked rtcmem reader / writer to use default values, instead of accidentaly using
the unitialized mem of the stack. Also, reworked const names used by the lights module
to distinguish them from the build flags.
Make sure transition is always pushed into the vector the same way
Only happens with ESPURNA_BUILD_SINGLE_SOURCE=1:
/home/runner/.platformio/packages/toolchain-xtensa/xtensa-lx106-elf/include/c++/4.8.2/bits/vector.tcc:405:31: error: __c causes a section type conflict with __c
_M_check_len(size_type(1), __EXCSTR("vector::_M_emplace_back_aux"));
^
/home/runner/.platformio/packages/toolchain-xtensa/xtensa-lx106-elf/include/c++/4.8.2/bits/vector.tcc:71:23: note: '__c' was declared here
__throw_length_error(__EXCSTR(__N("vector::reserve")));
- make sure we have custom provider before calling the update,
replace old check in the update function
- fix race condition in the provider function, causing complete lock-up of
lights controls (triggered by sending light updates very fast. for example,
using arrow keys with the webui sliders; ref. #2424)
- rework state change functions to work using loop() func instead of a
pair of scheduled functions. we should not go out-of-sync now, and it
also avoids forcibly creating std::func object each invocation
- rework other providers to be more in line with custom callbacks -
introduce state, value and update calls as a common way to handle lights
- correctly handle state change when turning OFF and ON
- update tuya to store the last state, never send channel values when OFF (ref. #2424)
- retain setting
- generate topic and message in the discovery object instead of
creating them all at once
- re-implement relays, lights and sensors discovery
- rework name normalization, use relative magnitude indexes
- replace original lights code with schema: json, subscribe to a special
topic to handle lights instead of using the common API
(still wip - colors, hs, temperature settings)
resolve#630resolve#1564resolve#2403
- shrink utils source file, move heartbeat and boot management into system
- improvise with 'heartbeat' functionality. include scheduler implementation that will
manage the per-module heartbeat callbacks with individual 'mode' and
'interval' settings. current ones are mqtt (including relays, lights, thermostat), debug and
influxdb. preserve heartbeat NONE, ONCE and REPEAT, REPEAT_STATUS is effectively a hbReport & status bit.
- mqtt heartbeat is managed through mqttHeartbeat() callbacks
- tweak mqtt callbacks to use lists instead of the vector, slighly reducing the size of the .bin
- update WebUI, include report setting and update hbMode values
- make sure general.h settings include new heartbeat,
move constant definitions outside of the header
- correctly include dependencies through the .cpp, avoid leaking
internal details.
- as a side-effect, base headers are no longer included recursively
ref. https://github.com/xoseperez/espurna/issues/1132#issuecomment-431868924
it is slightly bigger, but better looking and no jquery dependency
rework colorpicker style as well, hide to prevent sending garbage when
lights are off. update lights module to send `lightState()` and separate
state from status payloads
yes, input[type="color"] is an option, but it does not look good
- gpio module now tracks the known providers (right now, hardware and mcp expander)
- refactored relay struct to use 'Provider' implementing setup,notify,change,boot instead of just BasePin actions
- refactored button module to use gpio provider instead of referencing types itself
- removed dual & stm code from buttons, migrate both to relay module
- added status notify and change callbacks for relayStatus (i.e. 'notify' when relay status was called, but not changed. and 'changed' when it did)
- relays runtime configuration keys
- relay command now shows configured relays and current & target statuses
- refactor the code using relayStatus(0, blah) under LIGHT_PROVIDER check to use lightState instead
- remove rfbridge code form relay module. implement through a basic state listener in the rfbridge module, depend on RELAY_SUPPORT
- allow to bind rf codes to real relays
- drop tuya-specific lights provider, remove tuya code from relays and lights modules
- integrate tuya via relay listeners and providers, use lights custom provider
- implement channel transitions for tuya. disabled by default, and transition time and step are overridden to 2000 + 100. needs to be set to some value below the total time (i.e. `total transition time / step time == number of steps`, we need to figure out a correct time that serial comms could handle)
- lights custom provider (global, not per-pin) and state listeners
- remove lights code from relay module. implement through providers & listeners in the lights module, depend on RELAY_SUPPORT
- lights per-channel relay provider (unused atm), depend on RELAY_SUPPORT
- refactored channel transition - calculate step only once, make sure time + step values are sane, generate quick transitions with very small delay (10ms hardcoded) for transitions during OFF state i.e. we no longer waste 500ms (or whatever transition time is set to) on boot doing nothing
- transition time + step parameter for the lightUpdate
- report mask parameter for the lightUpdate
- minor fixes across the board
resolve#2222
- match paths through a custom AsyncWebHandler instead of using generic not-found fallback handler
- allow MQTT-like patterns when registering paths (`simple/path`, `path/+/something`, `path/#`)
Replaces `relay/0`, `relay/1` etc. with `relay/+`. Magnitudes are plain paths, but using `/+` in case there's more than 1 magnitude of the same type.
- restore `std::function` as callback container (no more single-byte arg nonsense). Still, limit to 1 type per handler type
- adds JSON handlers which will receive JsonObject root as both input and output. Same logic as plain - GET returns resource data, PUT updates it.
- breaking change to `apiAuthenticate(request)`, it no longer will do `request->send(403)` and expect this to be handled externally.
- allow `Api-Key` header containing the key, works for both GET & PUT plain requests. The only way to set apikey for JSON.
- add `ApiRequest::param` to retrieve both GET and PUT params (aka args), remove ApiBuffer
- remove `API_BUFFER_SIZE`. Allow custom form-data key=value pairs for requests, allow to send basic `String`.
- add `API_JSON_BUFFER_SIZE` for the JSON buffer (both input and output)
- `/apis` replaced with `/api/list`, no longer uses custom handler and is an `apiRegister` callback
- `/api/rpc` custom handler replaced with an `apiRegister` callback
WIP further down:
- no more `webLog` for API requests, unless `webAccessLog` / `WEB_ACCESS_LOG` is set to `1`. This also needs to happen to the other handlers.
- migrate to ArduinoJson v6, since it become apparent it is actually a good upgrade :)
- actually make use of JSON endpoints more, right now it's just existing GET for sensors and relays
- fork ESPAsyncWebServer to cleanup path parsing and temporary objects attached to the request (also, fix things a lot of things based on PRs there...)
- reduce overall size of the structure, store a single required entity
inside of Api object itself.
- tweak internal functions to expect a certain path size
- (kind of a hack) add manual calls to vector<Api>::reserve() as we go over
the current capacity and vector increases it's size times 2.
e.g. for 9 relays, we would allocate space for 32 Api objects
when vector size goes from 16 to 32, after we add 18 Api objects with relay + pulse
- (breaking) json calls on a separate path, don't waste time encoding
a single entity as json object when we can encode more things
Change the underlying command line handling:
- switch to a custom parser, inspired by redis / sds
- update terminalRegisterCommand signature, pass only bare minimum
- clean-up `help` & `commands`. update settings `set`, `get` and `del`
- allow our custom test suite to run command-line tests
- clean-up Stream IO to allow us to print large things into debug stream (for example, `eeprom.dump`)
- send parsing errors to the debug log
As a proof of concept, introduce `TERMINAL_MQTT_SUPPORT` and `TERMINAL_WEB_API_SUPPORT`
- MQTT subscribes to the `<root>/cmd/set` and sends response to the `<root>/cmd`. We can't output too much, as we don't have any large-send API.
- Web API listens to the `/api/cmd?apikey=...&line=...` (or PUT, params inside the body). This one is intended as a possible replacement of the `API_SUPPORT`. Internals introduce a 'task' around the AsyncWebServerRequest object that will simulate what WiFiClient does and push data into it continuously, switching between CONT and SYS.
Both are experimental. We only accept a single command and not every command is updated to use Print `ctx.output` object. We are also somewhat limited by the Print / Stream overall, perhaps I am overestimating the usefulness of Arduino compatibility to such an extent :)
Web API handler can also sometimes show only part of the result, whenever the command tries to yield() by itself waiting for something. Perhaps we would need to create a custom request handler for that specific use-case.
* broker: declare and define per module
We no longer need to specify each Broker type in broker.h
But, we exchange that bit for explicit initialization of the instance
Define helper macros to generate boilerplate code
- namespace with Instance, Register(), Publish()
- forward Register(...) -> Instance.Register(...),
Publish(...) -> Instance.Publish(...)
* don't check for broker when deps enable it
- general conversion from .ino modules into a separate .cpp files
- clean-up internal headers, place libraries into .h. guard .cpp with _SUPPORT flags
- fix some instances of shared variables instead of public methods
- tweak build system to still build a single source file via os environment variable ESPURNA_BUILD_SINGLE_SOURCE
- add ltDimmerGPIO<index> & ltDimmerInv<index> to override / add to hardware configuration. Add pin defaults, mapped as GPIO_NONE. pwm_init() receives resulting GPIO mapping based on settings loader.
- remove bogus _light_channels variable, use this name for channel array instead (...which is vector and has size(). functions always use that value anyway)
- add experimental `relayDummy` to configure dummy relays at runtime
- add tuya-generic-dimmer #1729
- cleanup broker interface to allow Tuya module to properly receive events, modify broker methods to allow different function signatures
- add basic tests for Tuya frame and data protocol
* light: fix inconsistent transitions
- capture step variable for the current transition
- use one-shot timer, restart from the timer callback
* schedule inside provider func, not transition
Maxim Prokhorov