- RF_... -> RFB_...
- rework rcswitch integration, support variable length payload
- rework rfbridge parser (not tested)
- rework settings scanning routine when trying to match rf payload
  with the relay ID
- update build tests

- implement mcp23s08
- support mcp pins in relays and buttons
- add hardware profile for ProDino WiFi

Co-authored-by: dpeddi <dpeddi@gmail.com>
Co-authored-by: Maxim Prokhorov <prokhorov.max@outlook.com>

* Completed kingart curtain switch support:
Added Web UI controls and view in status
Added power up behaviour (nothing, close, open, last position)
Added curtain style (Roller, etc...) for UI status and to be used in MQTT

* Checked commit before PR. Added html gulp static files generated.

* Corrected a code refactor error which make the MQTT messages not handling position from received messages. Added comment to debug tab to show how to enable debug

* Use the maximum compression for gzip. A byte is a byte :)

* Update code/espurna/curtain_kingart.cpp

Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>

* Variable name prefix update
Added public set position function and curtain count

* Added Scheduler new type : curtain

* Add curtain schedule support and correct the 12h bug when adding a slot (00:00 after refresh). Default Hour is 12h

* Code cleaning.
Schedule support.
Light support is having an issue with new schedules corrected here.

* I let do better by the specialists

* Curtain init statues

* Coding style corrections

* Removed debug stuff from now - will be back later with the right way

* rebuild webui

* revert 435f1c5e03 schHour default, rebuild ui

Co-authored-by: Eric Chauvet <eric.chauvet@test-tree.com>
Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>

* hardware: Add support for HUGOAI smart socket plug.

* Update code/platformio.ini

Co-authored-by: pezinek <pezinek@gmail.com>

Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>
Co-authored-by: pezinek <pezinek@gmail.com>

This will add support for the KingArt Wifi Curtain Switch. There are no buttons in the web interface as I could not figure out how to create them (any help on that is welcome).

For now the switch can be controlled over MQTT:
"{hostname}/curtain/set"
"{hostname}/curtain"

* hardware: Add support for Aoycocr X5P Plug.

This change allow espurna to control Aoycocr X5P Plug devices, which has
the same behaviour as the GOSUND WP3 but using different GPIO pins for
relay, button and leds.

* Update platformio.ini

Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>

* update platformio.ini comments
* espurna-base -> espurna-core-webui
* esp8266-<flavour>-<size>-base -> esp8266-<size>-<flavour>-base
* clean-up ESPURNA_CORE detection, use boards function

* base envs

* CI: speed up release process (since we still want some .bin files)

* fixup! CI: speed up release process (since we still want some .bin files)

* release dry run

* fixup! release dry run

* adjust

* fix .bin name

* it works

* minor cleanup for current git

* use pio suggestion about ldscript, reduce build_flags impact

* fix linker

* parse ${vars} instead of ignoring them

* add filtering and override file (sneak peak into tasmota's pio config)

* don't generate secure client (for now)

* formatting

* codacy

* correct Gosund WP3 led color documentation; provide reasonable default actions for button and the two LEDs

* reverse red/blue led roles, as requested, to be consistent with other existing products

Co-authored-by: ziggurat29 <xxx@yyy.zzz>

Co-authored-by: ziggurat29 <xxx@yyy.zzz>

https://github.com/xoseperez/espurna/pull/2185#issuecomment-601198322
-11KiB

Co-authored-by: ziggurat29 <xxx@yyy.zzz>

* wip

* cleanup buttons-through-serial code, remove hw mention from button module

* remove wip

* implement mqtt settings

* fixup struct members, dual no longer allocates debouncer

* add missing debounceevent lib

* fix missing event_handler, update names

* fix namespace

* drop lib

* fix int<->bool comparison

* Move gpio16 handling from DigitalPin to EventHandler

* Cleanup debounceevent headers

* Don't expect system headers to be included

* re 70b54c489f - no allocation, for real

* Adjust settings names

* dont retain by default

* unused

* typo

* Fix length type (ref 6017ad9474)

* Move pin class outside of debounce lib, lowercase ns

* move event handling inside of button_t

* refactor config. ..._MODE -> _CONFIG, ..._MODE_... -> ..._ACTION_...

* fix test

* naming

* move indexed value to header

* refactor actions into direct opts

* fix webui, fix buttons not respecting old user setting

* change button config format from bitmask to a struct, adjust settings conversion

* proxy some more header defautls, fix web kv

* gpiopin

* adjust webui func to support every setting

* clarify single-return event->string

* fix dual setting

* fix dual packet condition, de-duplicate funcs

* fix bogus warning

* Config: remove prototypes.h

* fixup order

* word

* add missing

* fix warning while still using .ino

* bad at c/p;

- use similar to relay & wifi, configuration through helper methods that
  use indexed defines
- clock cycles for led delay polling
- button mode defaults

Not a match to same model from Neo Coolcam

* add support for DELTACO SH-P01

* renaming deltaco_sh_le14w to deltaco_sh_lexxw

* add support Deltaco SH-P03USB and SH-LEXXRGB

* Add support for Kogan Smarter Home Plug With Energy Meter

Type: Power Plug
Board: Kogan Smarter Home Plug with Energy Meter
Build flag: KOGAN_SMARTER_HOME_PLUG_W_POW
Description: Power Plug with integrated Energy Meter
Baseboard: Tuya TYWE3S
Baseboard Data sheet: https://docs.tuya.com/docDetail?code=K8uhkbb1ihp8u

* Include Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW) into arduino.h

* Update platformio.ini to support Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW)

* Add Kogan Smarter Home plug with energy meter product image

* fix platformio.ini that was missing a '-ota' for the environment

* comment out device definition

* Make device name consistent with #define and platformio.ini

This LED strip is sold by ACTION in Germany and comes with a Tuya (TYWE3L) chip. It can be "freed" by using tuya-convert. It has (yet another) IR remote control that uses another set of codes. Which is added, too. The color codes are copies from SET 1 and 2.
I kind of think that they don't match my remote control but since i'm using my smart home system for controlling, i don't care enough to figure out the correct color codes.

The circuit board supports also a CW channel on PIN 5 (which is not used on by version), nevertheless I've added a comment in case anybody has a similar device with CW

We have created a few dozens of devices, released as open-source hardware and
published the schematics to GitHub. We're planning to organize some small
(10-15 people) workshops on how to assemble, flash and configure these board.

https://github.com/eHomeDIY

* Add LinkSprite R4 def

* Platformio.ini def for linksprite r4

* LINKSPRITE_LINKNODE_R4

- fix hardware.h weird encoding (todo: is there a git-attribute for
this to be peristent?)
- sort and add missing support and hw entries to the arduino.h
- force thermostat to depend on sensors to avoid confusing linker error

* add support for Hykker Smart Plug with power meter
Type: Power Plugs
Board: Hykker Power Plug
Build flag: HYKKER_POWER_PLUG
Description: Power plug w/ power metering

* Update arduino.h

hykker power plug

* Update platformio.ini

hykker power plug

* Type: Power Plugs
Board: Hykker Smart Home Power Plug
Build flag: HYKKER_SMART_HOME_POWER_PLUG
Description: Power plug w/ power metering

* voltage ratio calibration for correct results

* sensor: add DHT_CHIP_SI7021 references

* sensor: update DHT_TYPE definitions, use enum

* changelog

- add experimental `relayDummy` to configure dummy relays at runtime
- add tuya-generic-dimmer #1729
- cleanup broker interface to allow Tuya module to properly receive events, modify broker methods to allow different function signatures
- add basic tests for Tuya frame and data protocol

* RPN rules (WIP)

* RPN rules web interface, MQTT inputs

* Stickyness, rpn.ops,...

* Perform light updates only when value changes

* Improve wsSend performance

* Revert PR test

* Check TERMINAL_SUPPORT for _rpnInitCommands and remove unused variable

* Fix merge

* formatting

* disable by default (?)

* changelog

* comment

* remove debug function wrappers in favour of var activation

* fixup! comment

* Adding support for miobulb001

* Add miobulb001 images

* defined MUVIT_IO_MIOBULB001

* Update platformio.ini

revert default env
use dashes

* typo

* typo

* travis: move build flags tests outside of hardware header

* mqtt: fix typo

* travis: use files instead of bundling test cases into script

* fixup! travis: use files instead of bundling test cases into script

* fix variable expansion, remove custom h at the end

* add ade7953 to sensors list

* custom.h path as variable

* shellcheck

* fix printf syntax, silent again

* fix bash 4.3 treating empty array as unset variable

Control board for Hoermann UAP1 Garage interface
http://frank-schuetz.de/index.php/fhem/13-hoermann-torantrieb-mit-espeasy-in-fhem-einbinden

* Add Shelly 2.5

* Add ADE7953 sensor support

* Fix compilation

* Use only one instance

* WIP: Not working, I got StoreProhibited exception

* Fix exception

* Fix merge issues

* Apply request review changes

* declare struct before using it

* uninterruptible delay

* try optimized reg_size

* fix types

* Remove gpio 0 input in analog sensor

* Add energy to ADE7953, it is not finished yet

* Add new method to save energy with index

* Finish energy for ADE7953