* Add support for Kogan Smarter Home Plug With Energy Meter

Type: Power Plug
Board: Kogan Smarter Home Plug with Energy Meter
Build flag: KOGAN_SMARTER_HOME_PLUG_W_POW
Description: Power Plug with integrated Energy Meter
Baseboard: Tuya TYWE3S
Baseboard Data sheet: https://docs.tuya.com/docDetail?code=K8uhkbb1ihp8u

* Include Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW) into arduino.h

* Update platformio.ini to support Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW)

* Add Kogan Smarter Home plug with energy meter product image

* fix platformio.ini that was missing a '-ota' for the environment

* comment out device definition

* Make device name consistent with #define and platformio.ini

This LED strip is sold by ACTION in Germany and comes with a Tuya (TYWE3L) chip. It can be "freed" by using tuya-convert. It has (yet another) IR remote control that uses another set of codes. Which is added, too. The color codes are copies from SET 1 and 2.
I kind of think that they don't match my remote control but since i'm using my smart home system for controlling, i don't care enough to figure out the correct color codes.

The circuit board supports also a CW channel on PIN 5 (which is not used on by version), nevertheless I've added a comment in case anybody has a similar device with CW

We have created a few dozens of devices, released as open-source hardware and
published the schematics to GitHub. We're planning to organize some small
(10-15 people) workshops on how to assemble, flash and configure these board.

https://github.com/eHomeDIY

* Add LinkSprite R4 def

* Platformio.ini def for linksprite r4

* LINKSPRITE_LINKNODE_R4

- add nodemcu-lolin-secure-client
- add nodemcu-lolin-latest based on $platform_latest
- remove nodemcu-lolin-252 based on $arduino_core_2_5_2

* web: revert changed from secure_client patch

* ota/httpupdate: use SecureClient

* ota/httpupdate: use scheduled function on mqtt event

* config: finish up 590282e changes + add warnings

* typo fix

* use bind instead of c++14 magic, use debug text from secureclient

* bump

* actually use the locking

* add support for Hykker Smart Plug with power meter
Type: Power Plugs
Board: Hykker Power Plug
Build flag: HYKKER_POWER_PLUG
Description: Power plug w/ power metering

* Update arduino.h

hykker power plug

* Update platformio.ini

hykker power plug

* Type: Power Plugs
Board: Hykker Smart Home Power Plug
Build flag: HYKKER_SMART_HOME_POWER_PLUG
Description: Power plug w/ power metering

* voltage ratio calibration for correct results

- add experimental `relayDummy` to configure dummy relays at runtime
- add tuya-generic-dimmer #1729
- cleanup broker interface to allow Tuya module to properly receive events, modify broker methods to allow different function signatures
- add basic tests for Tuya frame and data protocol

* RPN rules (WIP)

* RPN rules web interface, MQTT inputs

* Stickyness, rpn.ops,...

* Perform light updates only when value changes

* Improve wsSend performance

* Revert PR test

* Check TERMINAL_SUPPORT for _rpnInitCommands and remove unused variable

* Fix merge

* formatting

* disable by default (?)

* changelog

* comment

* remove debug function wrappers in favour of var activation

* fixup! comment

* Adding support for miobulb001

* Add miobulb001 images

* defined MUVIT_IO_MIOBULB001

* Update platformio.ini

revert default env
use dashes

* typo

* typo

* utils/version: use git description token as version, add memoization

* pio: move extra scripts to a separate directory

* pio: add -DAPP_REVISION=... as local build flag

* travis: move build flags tests outside of hardware header

* mqtt: fix typo

* travis: use files instead of bundling test cases into script

* fixup! travis: use files instead of bundling test cases into script

* fix variable expansion, remove custom h at the end

* add ade7953 to sensors list

* custom.h path as variable

* shellcheck

* fix printf syntax, silent again

* fix bash 4.3 treating empty array as unset variable

Control board for Hoermann UAP1 Garage interface
http://frank-schuetz.de/index.php/fhem/13-hoermann-torantrieb-mit-espeasy-in-fhem-einbinden

* Stop updating SoftAP SSID and password when changing hostname and password via WebUI / settings `reload`:
https://gitter.im/tinkerman-cat/espurna?at=5d65418f49ac051923be1f06
* Show real ssid and psk values from the current sdk configuration instead of using getSetting
* `WIFI.STA` command

* Add Shelly 2.5

* Add ADE7953 sensor support

* Fix compilation

* Use only one instance

* WIP: Not working, I got StoreProhibited exception

* Fix exception

* Fix merge issues

* Apply request review changes

* declare struct before using it

* uninterruptible delay

* try optimized reg_size

* fix types

* Remove gpio 0 input in analog sensor

* Add energy to ADE7953, it is not finished yet

* Add new method to save energy with index

* Finish energy for ADE7953

* MQTT rewrite with SSL fixes

- Added Arduino MQTT library support (actively maintained)
- Added support for BearSSL (core >= 2.5)
- BearSSL validation: insecure, fingerprinting and CA validation
- AxTLS validation: insecure and fingerprinting
- Support MFLN in order to reduce heap usage

* Better header incl, fix building w/ no NTP_SUPPORT

* Clean up code, use DEBUG_MSG_P

* Fix compile error

* Core 2.6.0+ fixes

* fix env -> config, run travis04 job

* don't duplicate free heap in frag data, use single stats struct

* fix dtostrf warnings, bump buffer sizes

* ...and even less words for fragmentation stat

- update every dynamicjsonbuffer with fixed size constructor argument
- change to ws callback registration to use a class builder (just cosmetic)
- test multiple ws data callbacks for each module
- remove some of the static strings in favour of ws data callback
- improve sensor ws callback data size, remove duplicated strings
- use static buffer in wsDebugSend
- postpone wsSend until loop, implement wsPost to allow other modules to queue message callbacks. remove Ticker based ws callbacks for data
- update WebUI files

* initial ldscripts refactoring

* add missing menu options

* board for 2.3.0 and 2.4.2

* test with core 2.5.0

* typo

* ...same typo in other boards.local.txt

* generate boards.local.txt from common template

* Depend on file presence instead of platform version

* sdk selection

* Override only relevant entries

* generate ldscripts

* formatting

* unused

* fix section scope

* fix linker script comment and build getting stuck

* py2 compat

platformio from pip still does not support py3

* add TODO for py3

* chmod +x, remove leading newline

* comment with real spiffs size

* fixup! chmod +x, remove leading newline

* regenerate all ldscripts

* Preventive fix of spiffs_end calculation

* update arg parsing

* generate only 2.3.0 and latest

* readme for boards.local.txt

* Update ldscript readme

* unique flash sizes

* fix sub

* line break

* correct way to get framework path

* Alias for _FS_... symbols

* unused 2m1m1s

* bump?

* show travis logs

* ensure latest toolchain for travis

* check platform packages when building

*  * Added support for Etekcity ESW01-USA device

* Update hardware.h

* Update hardware.h

Signed-off-by: Michael Murton <6764025+CrazyIvan359@users.noreply.github.com>

* Add Shelly 1PM

* Improve Shelly 1PM temperature tabs

* Add shelly 1pm button

Fix upload_... -> ota_upload_...

* Define ota_upload_port, ota_upload_flags

* Update core builds - basic, wps and smartconfig

* adding Nexete

Started Adding Nexete A19 Bulb

* Update hardware.h

* fixed pinout

* Rename to Nexete_A19 + added non-ota

* Use basic BearSSL ciphers on low memory boards

* Move BearSSL basic flag to recommendation

- update file paths: .pioenvs -> .pio/build, .piolibdeps -> .pio/libdeps
- modify envs to use common settings
- enable shared libs in travis and ota scripts

* PlatformIO development platforms

* Properly detect platform directory

* Naming

* Update platformio.ini

Fix random resets when connection closes prematurely

* Update encoder

- import modified Encoder library
- customize minimum delta value

* minimum delta in header config

* fixup! minimum delta in header config

* fix dead code, actually use interrupts

* move static class methods to normal funcs, apply namespace

* drop hardcoded register use

- use peripheral api (see cores/esp8266/esp8266_peri.h)
- remove bitmask and register struct members

* add a note about changes

* fixup! add a note about changes

* Add support for MagicHome RGBWW LED strip

This adds support for MagicHome 5 channel LED strip. It is using ESP8285 board, labelled as ESP-M4, has 5 powerful MOSFETs (M3006D, up to 80A! continuous/160A peak) at 12-24V. They are driven by smaller transistors. Red LED is connected to 3.3V power supply, and can't be controller. Green LED is connected to GPIO. Pin mappings:
BTN IO0
R Q8 Q2 IO14
G Q6 Q3 IO12
B Q9 Q4 IO13
WW Q10 Q5 IO15
CW Q7 Q1 IO5
GREEN_LED IO2
Looks like the same board is used in another product which has support for RF remote, but mine doesn't, so I don't include RF config, if yours has it should be a simple copy/paste job to add it.

* Add config for push button

* Fix copy/paste mistake

* Turn on/off LEDs using the push button