update custom action callback to also get the event
buttons fan actions
ifan buttons are handled through action instead of manually
fan settings and api are (sort-of) generic
- gpio module now tracks the known providers (right now, hardware and mcp expander)
- refactored relay struct to use 'Provider' implementing setup,notify,change,boot instead of just BasePin actions
- refactored button module to use gpio provider instead of referencing types itself
- removed dual & stm code from buttons, migrate both to relay module
- added status notify and change callbacks for relayStatus (i.e. 'notify' when relay status was called, but not changed. and 'changed' when it did)
- relays runtime configuration keys
- relay command now shows configured relays and current & target statuses
- refactor the code using relayStatus(0, blah) under LIGHT_PROVIDER check to use lightState instead
- remove rfbridge code form relay module. implement through a basic state listener in the rfbridge module, depend on RELAY_SUPPORT
- allow to bind rf codes to real relays
- drop tuya-specific lights provider, remove tuya code from relays and lights modules
- integrate tuya via relay listeners and providers, use lights custom provider
- implement channel transitions for tuya. disabled by default, and transition time and step are overridden to 2000 + 100. needs to be set to some value below the total time (i.e. `total transition time / step time == number of steps`, we need to figure out a correct time that serial comms could handle)
- lights custom provider (global, not per-pin) and state listeners
- remove lights code from relay module. implement through providers & listeners in the lights module, depend on RELAY_SUPPORT
- lights per-channel relay provider (unused atm), depend on RELAY_SUPPORT
- refactored channel transition - calculate step only once, make sure time + step values are sane, generate quick transitions with very small delay (10ms hardcoded) for transitions during OFF state i.e. we no longer waste 500ms (or whatever transition time is set to) on boot doing nothing
- transition time + step parameter for the lightUpdate
- report mask parameter for the lightUpdate
- minor fixes across the board
resolve#2222
- Add ::Released button event to be used specifically with switches, opposite of ::Pressed
- Always use default state for switches instead of ignoring it and using current pin reading as value. This allows us to boot with the switch held in the opposite state and trigger the correct event immediately
(meaning, switches now depend on the BUTTON_DEFAULT_HIGH presence to detect the default position)
- BREAKING: Fixup hardware.h. Any custom board needs manual changes.
- BREAKING: Rework MQTT button messages to send text from debug messages instead of numeric code
- Buttons events source as button property instead of a global one
- Rename events source -> provider for all settings, consistent with the other things like relay and light providers
- AnalogPin to read between a certain analogRead() range
Trying to follow defaults here - analog 'press' is digital LOW, default value is HIGH, so no additional cfg entries are needed besides pin, level and changing evt source
- (debug) Refactor gpio command, add adc to show analogRead(pin)
- (debug) Add button command
Implemented based on:
https://gitter.im/tinkerman-cat/espurna?at=5f5d44c8df4af236f902e25dhttps://gitter.im/tinkerman-cat/espurna?at=5f60e7f1f969413294e95370
* Add support for the Zhilde ZLD-64EU-W
This is a power outlet with 6 power sockets and 4 USB ports.
* fixup based on the zld-44eu hw and tasmota template info
Co-authored-by: Maxim Prokhorov <prokhorov.max@outlook.com>
ref. https://travis-ci.com/github/mcspr/espurna-nightly-builder/jobs/378203413#L698
> +env ESPURNA_FLAGS=-DGENERIC_ESP01_512KB ESPURNA_RELEASE_NAME=generic-esp01-512kb ESPURNA_BUILD_SINGLE_SOURCE=1 pio run -e esp8266-512k-base -s -t release
> /home/travis/.platformio/packages/toolchain-xtensa/bin/../lib/gcc/xtensa-lx106-elf/4.8.2/../../../../xtensa-lx106-elf/bin/ld: .pio/build/esp8266-512k-base/firmware.elf section `.irom0.text' will not fit in region `irom0_0_seg'
Remove ~90Kb from the build.
* Completed kingart curtain switch support:
Added Web UI controls and view in status
Added power up behaviour (nothing, close, open, last position)
Added curtain style (Roller, etc...) for UI status and to be used in MQTT
* Checked commit before PR. Added html gulp static files generated.
* Corrected a code refactor error which make the MQTT messages not handling position from received messages. Added comment to debug tab to show how to enable debug
* Use the maximum compression for gzip. A byte is a byte :)
* Update code/espurna/curtain_kingart.cpp
Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>
* Variable name prefix update
Added public set position function and curtain count
* Added Scheduler new type : curtain
* Add curtain schedule support and correct the 12h bug when adding a slot (00:00 after refresh). Default Hour is 12h
* Code cleaning.
Schedule support.
Light support is having an issue with new schedules corrected here.
* I let do better by the specialists
* Curtain init statues
* Coding style corrections
* Removed debug stuff from now - will be back later with the right way
* rebuild webui
* revert 435f1c5e03 schHour default, rebuild ui
Co-authored-by: Eric Chauvet <eric.chauvet@test-tree.com>
Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>
This will add support for the KingArt Wifi Curtain Switch. There are no buttons in the web interface as I could not figure out how to create them (any help on that is welcome).
For now the switch can be controlled over MQTT:
"{hostname}/curtain/set"
"{hostname}/curtain"
* hardware: Add support for Aoycocr X5P Plug.
This change allow espurna to control Aoycocr X5P Plug devices, which has
the same behaviour as the GOSUND WP3 but using different GPIO pins for
relay, button and leds.
* Update platformio.ini
Co-authored-by: Max Prokhorov <prokhorov.max@outlook.com>
* base envs
* CI: speed up release process (since we still want some .bin files)
* fixup! CI: speed up release process (since we still want some .bin files)
* release dry run
* fixup! release dry run
* adjust
* fix .bin name
* it works
* minor cleanup for current git
* use pio suggestion about ldscript, reduce build_flags impact
* fix linker
* parse ${vars} instead of ignoring them
* add filtering and override file (sneak peak into tasmota's pio config)
* don't generate secure client (for now)
* formatting
* codacy
* correct Gosund WP3 led color documentation; provide reasonable default actions for button and the two LEDs
* reverse red/blue led roles, as requested, to be consistent with other existing products
Co-authored-by: ziggurat29 <xxx@yyy.zzz>
- use similar to relay & wifi, configuration through helper methods that
use indexed defines
- clock cycles for led delay polling
- button mode defaults
* Add support for Kogan Smarter Home Plug With Energy Meter
Type: Power Plug
Board: Kogan Smarter Home Plug with Energy Meter
Build flag: KOGAN_SMARTER_HOME_PLUG_W_POW
Description: Power Plug with integrated Energy Meter
Baseboard: Tuya TYWE3S
Baseboard Data sheet: https://docs.tuya.com/docDetail?code=K8uhkbb1ihp8u
* Include Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW) into arduino.h
* Update platformio.ini to support Kogan Smarter Home plug with energy meter (KOGAN_SMARTER_HOME_PLUG_W_POW)
* Add Kogan Smarter Home plug with energy meter product image
* fix platformio.ini that was missing a '-ota' for the environment
* comment out device definition
* Make device name consistent with #define and platformio.ini
Maxim Prokhorov
Alex. Tircovnicu
Nicolas Gilles
tom-kaltofen
user176176
Bert Vermeulen
dpeddi
Matt Black
Andrej Peterka
Eric Chauvet
Esteban Zapata Rojas
Albert Weterings
ziggurat29
julianwb
Anders Blockmar
orrpan
Wil Wilsman
Marcus Winkler
Aurélien Requiem