Xose Pérez
|
84af178c3f
|
Command to save settings when SETTINGS_AUTOSAVE is off
|
6 years ago |
Xose Pérez
|
915082162d
|
Limit the max number of nodes supported in RFM69 module
|
6 years ago |
ValCob
|
30285b3a72
|
we should send only buttons events that have actions assigned to them or set BUTTON_MQTT_SEND_ALL_EVENTS to 1 to send everything
|
6 years ago |
Xose Pérez
|
ba4d4be810
|
Remove duplicate call to EEPROMr.begin (#1214)
|
6 years ago |
Xose Pérez
|
2b9a7341c3
|
Replace HEARTBEAT_ENABLED by HEARTBEAT_MDE allowing disable, single heartbeat on MQTT connect or repeat (default) (#1196)
|
6 years ago |
Xose Pérez
|
5488bfaf7f
|
API is not restful (issue a PUT to change a relay status). It can be disabled from web UI (#1192)
|
6 years ago |
Xose Pérez
|
04b48881a9
|
Try to send up to 3 times a POST to Thingspeak if the result is not >0 (#1213)
|
6 years ago |
Xose Pérez
|
a0105ce00f
|
Changed default values for RFM69GW board
|
6 years ago |
Yonsm
|
3e1031ab7c
|
define HOMEASSISTANT_PAYLOAD_AVAILABLE and HOMEASSISTANT_PAYLOAD_NOT_AVAILABLE
|
6 years ago |
Xose Pérez
|
261748e5e8
|
Option to disable password in telnet connections, default is enabled
|
6 years ago |
Xose Pérez
|
7e22a8878e
|
Configure AP fallback at build time
|
6 years ago |
Maxim Prokhorov
|
e326fbe09f
|
hostname/password length requirements
* fix webui regexp and input length limits
* explain requirements in webui and headers
|
6 years ago |
Xose Pérez
|
29d8dd734f
|
Support for IR transmit and MQTT-IR bridge, also in RAW mode (#556, #907)
|
6 years ago |
Xose Pérez
|
ea1207195c
|
Initial -untested- support for Xiaomi Smart Desk Lamp (#884) and rotary encoders
|
6 years ago |
Xose Pérez
|
9aafa58fcd
|
Change light module to use soft config
|
6 years ago |
Xose Pérez
|
4f61d3aa7e
|
Option to remove API_SUPPORT at build time
|
6 years ago |
Xose Pérez
|
f827f91c43
|
Update version to 1.13.2b
|
6 years ago |
Xose Pérez
|
13b0279ecc
|
Option to change default payload for HA (#1085)
|
6 years ago |
Xose Pérez
|
a8a0e11d24
|
Clean IR reception, IR to MQTT
|
6 years ago |
Xose Pérez
|
0c65bfe36b
|
Option to cofigure ON/OFF payload at build time (#1085)
|
6 years ago |
Maxim Prokhorov
|
8a0b3bca42
|
Fix compiler warnings
Add button definitions to the travis02 and travis03
IR_BUTTON should be uint32_t to properly work with new macro
eepromRotate return value is not used
|
6 years ago |
Xose Pérez
|
9078ff3404
|
Fix comment in PWM config
|
6 years ago |
Xose Pérez
|
b44258ac41
|
Preliminary support for Itead Sonoff IFAN02
|
6 years ago |
Xose Pérez
|
f93b100e8a
|
Remove support for secondary Serial RX port (Huacanzing devices), use TELNET or WEB DEBUG instead
|
6 years ago |
Xose Pérez
|
126471e2e0
|
Serial debug working out of configuration
|
6 years ago |
Xose Pérez
|
e9d8ad7364
|
Load config on boot from embedded JSON file
|
6 years ago |
Xose Pérez
|
152bf22fdd
|
Option to disable button support
|
6 years ago |
Xose Pérez
|
210cd8df71
|
Option to disable LED support
|
6 years ago |
Xose Pérez
|
3cd58e7f7c
|
Initial support for RFM69GW board
|
6 years ago |
Maxim Prokhorov
|
f4de7c061b
|
MQTT dynamic pulse timer for relays
|
6 years ago |
Xose Pérez
|
5db395cffd
|
Enable CORS
|
6 years ago |
Xose Pérez
|
53aa1d109e
|
Increasing MQTT keepalive to 300s to fit into the heartbeat interval (#715)
|
6 years ago |
Xose Pérez
|
ad623524f5
|
Fix password check regexp (#879)
|
6 years ago |
Xose Pérez
|
bc30b9e2f6
|
Specific EEPROM module
|
6 years ago |
Xose Pérez
|
4548cc724c
|
Using EEPROM_Rotate library
|
6 years ago |
Xose Pérez
|
3dae7b71a0
|
Added UART_MQTT_TERMINATION setting
|
6 years ago |
Xose Pérez
|
73906fbe73
|
Initial support for JustWifi v2
|
6 years ago |
Xose Pérez
|
265991eacd
|
Move debug defines to their own header
|
6 years ago |
Darsh Patel
|
f51c4e5e0a
|
Added Remote keypad for relay toggle
Added samsung AA59-00608A , to toggle relays for a 8CH Relay Board
|
6 years ago |
Xose Pérez
|
0575a97fb3
|
Added captive portal when in AP mode
|
6 years ago |
Xose Pérez
|
2060dd9661
|
Initial support for syslog messaging
|
6 years ago |
Niklas Wagner
|
f116f30ef7
|
Rename variables
|
6 years ago |
Niklas Wagner
|
81dcb644b6
|
Switch 4th and 5th channel and rename variables
|
6 years ago |
Xose Pérez
|
42b2974790
|
Some fixings after configuration refactor
|
6 years ago |
Niklas Wagner
|
20adc846a9
|
Use the 5th Channel as Cold White LED
|
6 years ago |
Xose Pérez
|
4600fd5fa3
|
NTP method to get a string from any unix timestamp
|
6 years ago |
Xose Pérez
|
f2bd5bad54
|
Add deleted definitions
|
6 years ago |
Xose Pérez
|
33b2c919bc
|
Add brightness factor for lightbulbs with power white LEDs but low brightness RGB
|
6 years ago |
Lazar Obradovic
|
9ee9ad813e
|
WIFI params should be defined
|
6 years ago |
Lazar Obradovic
|
9db0b4b4d7
|
ntp_time_offset and net_day_light
|
6 years ago |