//------------------------------------------------------------------------------ // Do not change this file unless you know what you are doing // Configuration settings are in the settings.h file //------------------------------------------------------------------------------ //------------------------------------------------------------------------------ // GENERAL //------------------------------------------------------------------------------ #define ADMIN_PASS "fibonacci" // Default password (WEB, OTA, WIFI) #define DEVICE_NAME MANUFACTURER "_" DEVICE // Concatenate both to get a unique device name #define LOOP_DELAY_TIME 10 // Delay for this millis in the main loop [0-250] #define ARRAYINIT(type, name, ...) \ type name[] = {__VA_ARGS__}; //------------------------------------------------------------------------------ // TELNET //------------------------------------------------------------------------------ #ifndef TELNET_SUPPORT #define TELNET_SUPPORT 1 // Enable telnet support by default #endif #ifndef TELNET_STA #define TELNET_STA 0 // By default, disallow connections via STA interface #endif #define TELNET_PORT 23 // Port to listen to telnet clients #define TELNET_MAX_CLIENTS 1 // Max number of concurrent telnet clients //------------------------------------------------------------------------------ // DEBUG //------------------------------------------------------------------------------ // Serial debug log #ifndef DEBUG_SERIAL_SUPPORT #define DEBUG_SERIAL_SUPPORT 1 // Enable serial debug log #endif #ifndef DEBUG_PORT #define DEBUG_PORT Serial // Default debugging port #endif //------------------------------------------------------------------------------ // UDP debug log // To receive the message son the destination computer use nc: // nc -ul 8113 #ifndef DEBUG_UDP_SUPPORT #define DEBUG_UDP_SUPPORT 0 // Enable UDP debug log #endif #define DEBUG_UDP_IP IPAddress(192, 168, 1, 100) #define DEBUG_UDP_PORT 8113 //------------------------------------------------------------------------------ #ifndef DEBUG_TELNET_SUPPORT #define DEBUG_TELNET_SUPPORT TELNET_SUPPORT // Enable telnet debug log if telnet is enabled too #endif //------------------------------------------------------------------------------ // General debug options and macros #define DEBUG_FORMAT_MAX_LENGTH 80 #define DEBUG_SUPPORT DEBUG_SERIAL_SUPPORT || DEBUG_UDP_SUPPORT || DEBUG_TELNET_SUPPORT #if DEBUG_SUPPORT #define DEBUG_MSG(...) debugSend(__VA_ARGS__) #define DEBUG_MSG_P(...) debugSend_P(__VA_ARGS__) #endif #ifndef DEBUG_MSG #define DEBUG_MSG(...) #define DEBUG_MSG_P(...) #endif //------------------------------------------------------------------------------ // TERMINAL //------------------------------------------------------------------------------ #ifndef TERMINAL_SUPPORT #define TERMINAL_SUPPORT 1 // Enable terminal commands #endif //------------------------------------------------------------------------------ // SYSTEM CHECK //------------------------------------------------------------------------------ #ifndef SYSTEM_CHECK_ENABLED #define SYSTEM_CHECK_ENABLED 1 // Enable crash check by default #endif #define SYSTEM_CHECK_TIME 60000 // The system is considered stable after these many millis #define SYSTEM_CHECK_MAX 5 // After this many crashes on boot // the system is flagged as unstable //------------------------------------------------------------------------------ // EEPROM //------------------------------------------------------------------------------ #define EEPROM_SIZE 4096 // EEPROM size in bytes #define EEPROM_RELAY_STATUS 0 // Address for the relay status (1 byte) #define EEPROM_ENERGY_COUNT 1 // Address for the energy counter (4 bytes) #define EEPROM_CUSTOM_RESET 5 // Address for the reset reason (1 byte) #define EEPROM_CRASH_COUNTER 6 // Address for the crash counter (1 byte) #define EEPROM_DATA_END 7 // End of custom EEPROM data block //------------------------------------------------------------------------------ // HEARTBEAT //------------------------------------------------------------------------------ #define HEARTBEAT_INTERVAL 300000 // Interval between heartbeat messages (in ms) #define UPTIME_OVERFLOW 4294967295 // Uptime overflow value // Topics that will be reported in heartbeat #define HEARTBEAT_REPORT_STATUS 1 #define HEARTBEAT_REPORT_IP 1 #define HEARTBEAT_REPORT_MAC 1 #define HEARTBEAT_REPORT_RSSI 1 #define HEARTBEAT_REPORT_UPTIME 1 #define HEARTBEAT_REPORT_FREEHEAP 1 #define HEARTBEAT_REPORT_VCC 1 #define HEARTBEAT_REPORT_RELAY 1 #define HEARTBEAT_REPORT_LIGHT 1 #define HEARTBEAT_REPORT_HOSTNAME 1 #define HEARTBEAT_REPORT_APP 1 #define HEARTBEAT_REPORT_VERSION 1 #define HEARTBEAT_REPORT_INTERVAL 0 //------------------------------------------------------------------------------ // RESET //------------------------------------------------------------------------------ #define CUSTOM_RESET_HARDWARE 1 // Reset from hardware button #define CUSTOM_RESET_WEB 2 // Reset from web interface #define CUSTOM_RESET_TERMINAL 3 // Reset from terminal #define CUSTOM_RESET_MQTT 4 // Reset via MQTT #define CUSTOM_RESET_RPC 5 // Reset via RPC (HTTP) #define CUSTOM_RESET_OTA 6 // Reset after successful OTA update #define CUSTOM_RESET_NOFUSS 8 // Reset after successful NOFUSS update #define CUSTOM_RESET_UPGRADE 9 // Reset after update from web interface #define CUSTOM_RESET_FACTORY 10 // Factory reset from terminal #define CUSTOM_RESET_MAX 10 #include PROGMEM const char custom_reset_hardware[] = "Hardware button"; PROGMEM const char custom_reset_web[] = "Reset from web interface"; PROGMEM const char custom_reset_terminal[] = "Reset from terminal"; PROGMEM const char custom_reset_mqtt[] = "Reset from MQTT"; PROGMEM const char custom_reset_rpc[] = "Reset from RPC"; PROGMEM const char custom_reset_ota[] = "Reset after successful OTA update"; PROGMEM const char custom_reset_nofuss[] = "Reset after successful NoFUSS update"; PROGMEM const char custom_reset_upgrade[] = "Reset after successful web update"; PROGMEM const char custom_reset_factory[] = "Factory reset"; PROGMEM const char* const custom_reset_string[] = { custom_reset_hardware, custom_reset_web, custom_reset_terminal, custom_reset_mqtt, custom_reset_rpc, custom_reset_ota, custom_reset_nofuss, custom_reset_upgrade, custom_reset_factory }; //------------------------------------------------------------------------------ // BUTTON //------------------------------------------------------------------------------ #define BUTTON_DEBOUNCE_DELAY 50 // Debounce delay (ms) #define BUTTON_DBLCLICK_DELAY 500 // Time in ms to wait for a second (or third...) click #define BUTTON_LNGCLICK_DELAY 1000 // Time in ms holding the button down to get a long click #define BUTTON_LNGLNGCLICK_DELAY 10000 // Time in ms holding the button down to get a long-long click #define BUTTON_EVENT_NONE 0 #define BUTTON_EVENT_PRESSED 1 #define BUTTON_EVENT_RELEASED 2 #define BUTTON_EVENT_CLICK 2 #define BUTTON_EVENT_DBLCLICK 3 #define BUTTON_EVENT_LNGCLICK 4 #define BUTTON_EVENT_LNGLNGCLICK 5 #define BUTTON_MODE_NONE 0 #define BUTTON_MODE_TOGGLE 1 #define BUTTON_MODE_ON 2 #define BUTTON_MODE_OFF 3 #define BUTTON_MODE_AP 4 #define BUTTON_MODE_RESET 5 #define BUTTON_MODE_PULSE 6 #define BUTTON_MODE_FACTORY 7 //------------------------------------------------------------------------------ // RELAY //------------------------------------------------------------------------------ #define RELAY_MODE_OFF 0 #define RELAY_MODE_ON 1 #define RELAY_MODE_SAME 2 #define RELAY_MODE_TOOGLE 3 #define RELAY_TYPE_NORMAL 0 #define RELAY_TYPE_INVERSE 1 #define RELAY_TYPE_LATCHED 2 #define RELAY_SYNC_ANY 0 #define RELAY_SYNC_NONE_OR_ONE 1 #define RELAY_SYNC_ONE 2 #define RELAY_SYNC_SAME 3 #define RELAY_PULSE_NONE 0 #define RELAY_PULSE_OFF 1 #define RELAY_PULSE_ON 2 #define RELAY_PROVIDER_RELAY 0 #define RELAY_PROVIDER_DUAL 1 #define RELAY_PROVIDER_LIGHT 2 #define RELAY_PROVIDER_RFBRIDGE 3 // Pulse time in milliseconds #define RELAY_PULSE_TIME 1.0 // 0 means OFF, 1 ON and 2 whatever was before #define RELAY_MODE RELAY_MODE_OFF // 0 means ANY, 1 zero or one and 2 one and only one #define RELAY_SYNC RELAY_SYNC_ANY // 0 means no pulses, 1 means normally off, 2 normally on #define RELAY_PULSE_MODE RELAY_PULSE_NONE // Relay requests flood protection window - in seconds #define RELAY_FLOOD_WINDOW 3 // Allowed actual relay changes inside requests flood protection window #define RELAY_FLOOD_CHANGES 5 // Pulse with in milliseconds for a latched relay #define RELAY_LATCHING_PULSE 10 // Do not save relay state after these many milliseconds #define RELAY_SAVE_DELAY 1000 //------------------------------------------------------------------------------ // I18N //------------------------------------------------------------------------------ #define TMP_CELSIUS 0 #define TMP_FAHRENHEIT 1 #define TMP_UNITS TMP_CELSIUS // Temperature units (TMP_CELSIUS | TMP_FAHRENHEIT) //------------------------------------------------------------------------------ // LED //------------------------------------------------------------------------------ // All defined LEDs in the board can be managed through MQTT // except the first one when LED_AUTO is set to 1. // If LED_AUTO is set to 1 the board will use a defined LED to show wifi status. #define LED_AUTO 1 // LED # to use as WIFI status indicator #ifndef LED_WIFI #define LED_WIFI 1 #endif // ----------------------------------------------------------------------------- // WIFI // ----------------------------------------------------------------------------- #define WIFI_CONNECT_TIMEOUT 60000 // Connecting timeout for WIFI in ms #define WIFI_RECONNECT_INTERVAL 180000 // If could not connect to WIFI, retry after this time in ms #define WIFI_MAX_NETWORKS 5 // Max number of WIFI connection configurations #define WIFI_AP_MODE AP_MODE_ALONE #define WIFI_SLEEP_ENABLED 1 // Enable WiFi light sleep // Optional hardcoded configuration (up to 2 different networks) //#define WIFI1_SSID "..." //#define WIFI1_PASS "..." //#define WIFI1_IP "192.168.1.201" //#define WIFI1_GW "192.168.1.1" //#define WIFI1_MASK "255.255.255.0" //#define WIFI1_DNS "8.8.8.8" //#define WIFI2_SSID "..." //#define WIFI2_PASS "..." // ----------------------------------------------------------------------------- // WEB // ----------------------------------------------------------------------------- #ifndef WEB_SUPPORT #define WEB_SUPPORT 1 // Enable web support (http, api) #endif #ifndef WEB_EMBEDDED #define WEB_EMBEDDED 1 // Build the firmware with the web interface embedded in #endif // This is not working at the moment!! // Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core staging version. #define WEB_SSL_ENABLED 0 // Use HTTPS web interface #define WEB_MODE_NORMAL 0 #define WEB_MODE_PASSWORD 1 #define WEB_USERNAME "admin" // HTTP username #define WEB_FORCE_PASS_CHANGE 1 // Force the user to change the password if default one #define WEB_PORT 80 // HTTP port // ----------------------------------------------------------------------------- // WEBSOCKETS // ----------------------------------------------------------------------------- // This will only be enabled if WEB_SUPPORT is 1 (this is the default value) #define WS_BUFFER_SIZE 5 // Max number of secured websocket connections #define WS_TIMEOUT 1800000 // Timeout for secured websocket // ----------------------------------------------------------------------------- // API // ----------------------------------------------------------------------------- // This will only be enabled if WEB_SUPPORT is 1 (this is the default value) #define API_ENABLED 0 // Do not enable API by default #define API_BUFFER_SIZE 15 // Size of the buffer for HTTP GET API responses #define API_REAL_TIME_VALUES 0 // Show filtered/median values by default (0 => median, 1 => real time) // ----------------------------------------------------------------------------- // MDNS // ----------------------------------------------------------------------------- #ifndef MDNS_SUPPORT #define MDNS_SUPPORT 1 // Publish services using mDNS by default #endif // ----------------------------------------------------------------------------- // SPIFFS // ----------------------------------------------------------------------------- #ifndef SPIFFS_SUPPORT #define SPIFFS_SUPPORT 0 // Do not add support for SPIFFS by default #endif // ----------------------------------------------------------------------------- // OTA // ----------------------------------------------------------------------------- #define OTA_PORT 8266 // OTA port // ----------------------------------------------------------------------------- // NOFUSS // ----------------------------------------------------------------------------- #ifndef NOFUSS_SUPPORT #define NOFUSS_SUPPORT 0 // Do not enable support for NoFuss by default #endif #define NOFUSS_ENABLED 0 // Do not perform NoFUSS updates by default #define NOFUSS_SERVER "" // Default NoFuss Server #define NOFUSS_INTERVAL 3600000 // Check for updates every hour // ----------------------------------------------------------------------------- // MQTT // ----------------------------------------------------------------------------- #ifndef MQTT_USE_ASYNC #define MQTT_USE_ASYNC 1 // Use AysncMQTTClient (1) or PubSubClient (0) #endif // MQTT OVER SSL // Using MQTT over SSL works pretty well but generates problems with the web interface. // It could be a good idea to use it in conjuntion with WEB_SUPPORT=0. // Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core staging version. // // You can use it with MQTT_USE_ASYNC=1 (AsyncMqttClient library) // but you might experience hiccups on the web interface, so my recommendation is: // WEB_SUPPORT=0 // // If you use it with MQTT_USE_ASYNC=0 (PubSubClient library) // you will have to disable all the modules that use ESPAsyncTCP, that is: // ALEXA_SUPPORT=0, INFLUXDB_SUPPORT=0, TELNET_SUPPORT=0 and WEB_SUPPORT=0 // // You will need the fingerprint for your MQTT server, example for CloudMQTT: // $ echo -n | openssl s_client -connect m11.cloudmqtt.com:24055 > cloudmqtt.pem // $ openssl x509 -noout -in cloudmqtt.pem -fingerprint -sha1 #define MQTT_SSL_ENABLED 0 // By default MQTT over SSL will not be enabled #define MQTT_SSL_FINGERPRINT "" // SSL fingerprint of the server #define MQTT_ENABLED 0 // Do not enable MQTT connection by default #define MQTT_AUTOCONNECT 1 // If enabled and MDNS_SUPPORT=1 will perform an autodiscover and // autoconnect to the first MQTT broker found if none defined #define MQTT_SERVER "" // Default MQTT broker address #define MQTT_USER "" // Default MQTT broker usename #define MQTT_PASS "" // Default MQTT broker password #define MQTT_PORT 1883 // MQTT broker port #define MQTT_TOPIC "{identifier}" // Default MQTT base topic #define MQTT_RETAIN true // MQTT retain flag #define MQTT_QOS 0 // MQTT QoS value for all messages #define MQTT_KEEPALIVE 30 // MQTT keepalive value #define MQTT_RECONNECT_DELAY_MIN 5000 // Try to reconnect in 5 seconds upon disconnection #define MQTT_RECONNECT_DELAY_STEP 5000 // Increase the reconnect delay in 5 seconds after each failed attempt #define MQTT_RECONNECT_DELAY_MAX 120000 // Set reconnect time to 2 minutes at most #define MQTT_SKIP_RETAINED 1 // Skip retained messages on connection #define MQTT_SKIP_TIME 1000 // Skip messages for 1 second anter connection #define MQTT_USE_JSON 0 // Group messages in a JSON body #define MQTT_USE_JSON_DELAY 100 // Wait this many ms before grouping messages // These particles will be concatenated to the MQTT_TOPIC base to form the actual topic #define MQTT_TOPIC_JSON "data" #define MQTT_TOPIC_ACTION "action" #define MQTT_TOPIC_RELAY "relay" #define MQTT_TOPIC_LED "led" #define MQTT_TOPIC_BUTTON "button" #define MQTT_TOPIC_IP "ip" #define MQTT_TOPIC_VERSION "version" #define MQTT_TOPIC_UPTIME "uptime" #define MQTT_TOPIC_FREEHEAP "freeheap" #define MQTT_TOPIC_VCC "vcc" #define MQTT_TOPIC_STATUS "status" #define MQTT_TOPIC_MAC "mac" #define MQTT_TOPIC_RSSI "rssi" #define MQTT_TOPIC_APP "app" #define MQTT_TOPIC_INTERVAL "interval" #define MQTT_TOPIC_HOSTNAME "host" #define MQTT_TOPIC_TIME "time" #define MQTT_TOPIC_ANALOG "analog" #define MQTT_TOPIC_COUNTER "counter" #define MQTT_TOPIC_RFOUT "rfout" #define MQTT_TOPIC_RFIN "rfin" #define MQTT_TOPIC_RFLEARN "rflearn" // Power module #define MQTT_TOPIC_POWER_ACTIVE "power" #define MQTT_TOPIC_CURRENT "current" #define MQTT_TOPIC_VOLTAGE "voltage" #define MQTT_TOPIC_POWER_APPARENT "apparent" #define MQTT_TOPIC_POWER_REACTIVE "reactive" #define MQTT_TOPIC_POWER_FACTOR "factor" #define MQTT_TOPIC_ENERGY_DELTA "energy_delta" #define MQTT_TOPIC_ENERGY_TOTAL "energy_total" // Light module #define MQTT_TOPIC_CHANNEL "channel" #define MQTT_TOPIC_COLOR "color" // DEPRECATED, use RGB instead #define MQTT_TOPIC_COLOR_RGB "rgb" #define MQTT_TOPIC_COLOR_HSV "hsv" #define MQTT_TOPIC_ANIM_MODE "anim_mode" #define MQTT_TOPIC_ANIM_SPEED "anim_speed" #define MQTT_TOPIC_BRIGHTNESS "brightness" #define MQTT_TOPIC_MIRED "mired" #define MQTT_TOPIC_KELVIN "kelvin" #define MQTT_STATUS_ONLINE "1" // Value for the device ON message #define MQTT_STATUS_OFFLINE "0" // Value for the device OFF message (will) #define MQTT_ACTION_RESET "reset" // RESET MQTT topic particle // Internal MQTT events (do not change) #define MQTT_CONNECT_EVENT 0 #define MQTT_DISCONNECT_EVENT 1 #define MQTT_MESSAGE_EVENT 2 // Custom get and set postfixes // Use something like "/status" or "/set", with leading slash // Since 1.9.0 the default value is "" for getter and "/set" for setter #define MQTT_USE_GETTER "" #define MQTT_USE_SETTER "/set" // ----------------------------------------------------------------------------- // SETTINGS // ----------------------------------------------------------------------------- #ifndef SETTINGS_AUTOSAVE #define SETTINGS_AUTOSAVE 1 // Autosave settings o force manual commit #endif // ----------------------------------------------------------------------------- // LIGHT // ----------------------------------------------------------------------------- // Available light providers (do not change) #define LIGHT_PROVIDER_NONE 0 #define LIGHT_PROVIDER_MY92XX 1 // works with MY9291 and MY9231 #define LIGHT_PROVIDER_DIMMER 2 // LIGHT_PROVIDER_DIMMER can have from 1 to 5 different channels. // They have to be defined for each device in the hardware.h file. // If 3 or more channels first 3 will be considered RGB. // Usual configurations are: // 1 channels => W // 2 channels => WW // 3 channels => RGB // 4 channels => RGBW // 5 channels => RGBWW #ifndef LIGHT_SAVE_ENABLED #define LIGHT_SAVE_ENABLED 1 // Light channel values saved by default after each change #endif #define LIGHT_SAVE_DELAY 5 // Persist color after 5 seconds to avoid wearing out #ifndef LIGHT_PWM_FREQUENCY #define LIGHT_PWM_FREQUENCY 1000 // PWM frequency #endif #ifndef LIGHT_MAX_PWM #if LIGHT_PROVIDER == LIGHT_PROVIDER_MY92XX #define LIGHT_MAX_PWM 255 #endif #if LIGHT_PROVIDER == LIGHT_PROVIDER_DIMMER #define LIGHT_MAX_PWM 1000 #endif #endif // LIGHT_MAX_PWM #ifndef LIGHT_LIMIT_PWM #define LIGHT_LIMIT_PWM LIGHT_MAX_PWM // Limit PWM to this value (prevent 100% power) #endif #ifndef LIGHT_MAX_VALUE #define LIGHT_MAX_VALUE 255 // Maximum light value #endif #define LIGHT_MAX_BRIGHTNESS 255 // Maximun brightness value #define LIGHT_STEP 32 // Step size #define LIGHT_USE_COLOR 1 // Use 3 first channels as RGB #define LIGHT_USE_WHITE 0 // Use white channel whenever RGB have the same value #define LIGHT_USE_GAMMA 0 // Use gamma correction for color channels #define LIGHT_USE_CSS 1 // Use CSS style to report colors (1=> "#FF0000", 0=> "255,0,0") #define LIGHT_USE_RGB 0 // Use RGB color selector (1=> RGB, 0=> HSV) // ----------------------------------------------------------------------------- // POWER METERING // ----------------------------------------------------------------------------- // Available power-metering providers (do not change this) #define POWER_PROVIDER_NONE 0x00 #define POWER_PROVIDER_EMON_ANALOG 0x10 #define POWER_PROVIDER_EMON_ADC121 0x11 #define POWER_PROVIDER_HLW8012 0x20 #define POWER_PROVIDER_V9261F 0x30 #define POWER_PROVIDER_ECH1560 0x40 // Available magnitudes (do not change this) #define POWER_MAGNITUDE_CURRENT 1 #define POWER_MAGNITUDE_VOLTAGE 2 #define POWER_MAGNITUDE_ACTIVE 4 #define POWER_MAGNITUDE_APPARENT 8 #define POWER_MAGNITUDE_REACTIVE 16 #define POWER_MAGNITUDE_POWER_FACTOR 32 #define POWER_MAGNITUDE_ALL 63 // No power provider defined (do not change this) #ifndef POWER_PROVIDER #define POWER_PROVIDER POWER_PROVIDER_NONE #endif // Identify available magnitudes (do not change this) #if (POWER_PROVIDER == POWER_PROVIDER_HLW8012) || (POWER_PROVIDER == POWER_PROVIDER_V9261F) #define POWER_HAS_ACTIVE 1 #else #define POWER_HAS_ACTIVE 0 #endif #if (POWER_PROVIDER == POWER_PROVIDER_HLW8012) #define POWER_HAS_ENERGY 1 #else #define POWER_HAS_ENERGY 0 #endif #define POWER_VOLTAGE 230 // Default voltage #define POWER_MIN_READ_INTERVAL 2000 // Minimum read interval #define POWER_READ_INTERVAL 6000 // Default reading interval (6 seconds) #define POWER_REPORT_INTERVAL 60000 // Default report interval (1 minute) #define POWER_CURRENT_DECIMALS 2 // Decimals for current values #define POWER_VOLTAGE_DECIMALS 0 // Decimals for voltage values #define POWER_POWER_DECIMALS 0 // Decimals for power values #define POWER_ENERGY_DECIMALS 3 // Decimals for energy values #define POWER_ENERGY_DECIMALS_KWH 6 // Decimals for energy values #define POWER_ENERGY_FACTOR 1 // Watt * seconds == Joule (Ws == J) #define POWER_ENERGY_FACTOR_KWH (1. / 1000. / 3600.) // kWh #if POWER_PROVIDER == POWER_PROVIDER_EMON_ANALOG #define EMON_CURRENT_RATIO 30 // Current ratio in the clamp (30V/1A) #define EMON_SAMPLES 1000 // Number of samples to get for each reading #define EMON_ADC_BITS 10 // ADC depth #define EMON_REFERENCE_VOLTAGE 1.0 // Reference voltage of the ADC #define EMON_CURRENT_OFFSET 0.25 // Current offset (error) #undef ADC_VCC_ENABLED #define ADC_VCC_ENABLED 0 // Disable internal battery measurement #endif #if POWER_PROVIDER == POWER_PROVIDER_EMON_ADC121 #define EMON_CURRENT_RATIO 30 // Current ratio in the clamp (30V/1A) #define EMON_SAMPLES 1000 // Number of samples to get for each reading #define EMON_ADC_BITS 12 // ADC depth #define EMON_REFERENCE_VOLTAGE 3.3 // Reference voltage of the ADC #define EMON_CURRENT_OFFSET 0.10 // Current offset (error) #define ADC121_I2C_ADDRESS 0x50 // I2C address of the ADC121 #undef I2C_SUPPORT #define I2C_SUPPORT 1 // Enabled I2C support #endif #if POWER_PROVIDER == POWER_PROVIDER_HLW8012 #define HLW8012_USE_INTERRUPTS 1 // Use interrupts to trap HLW8012 signals #define HLW8012_SEL_CURRENT HIGH // SEL pin to HIGH to measure current #define HLW8012_CURRENT_R 0.001 // Current resistor #define HLW8012_VOLTAGE_R_UP ( 5 * 470000 ) // Upstream voltage resistor #define HLW8012_VOLTAGE_R_DOWN ( 1000 ) // Downstream voltage resistor #endif #if POWER_PROVIDER == POWER_PROVIDER_V9261F #ifndef V9261F_PIN #define V9261F_PIN 2 // TX pin from the V9261F #endif #ifndef V9261F_PIN_INVERSE #define V9261F_PIN_INVERSE 1 // Signal is inverted #endif #define V9261F_SYNC_INTERVAL 600 // Sync signal length (ms) #define V9261F_BAUDRATE 4800 // UART baudrate // Default ratios #define V9261F_CURRENT_FACTOR 79371434.0 #define V9261F_VOLTAGE_FACTOR 4160651.0 #define V9261F_POWER_FACTOR 153699.0 #define V9261F_RPOWER_FACTOR V9261F_CURRENT_FACTOR #endif #if POWER_PROVIDER == POWER_PROVIDER_ECH1560 #ifndef ECH1560_CLK_PIN #define ECH1560_CLK_PIN 4 // Default CLK pin #endif #ifndef ECH1560_MISO_PIN #define ECH1560_MISO_PIN 5 // Default MISO pin #endif #ifndef ECH1560_INVERTED #define ECH1560_INVERTED 0 // Power signal is inverted #endif #endif // ----------------------------------------------------------------------------- // I2C // ----------------------------------------------------------------------------- #ifndef I2C_SUPPORT #define I2C_SUPPORT 0 // I2C enabled #endif #define I2C_SDA_PIN 4 // SDA GPIO #define I2C_SCL_PIN 14 // SCL GPIO #define I2C_CLOCK_STRETCH_TIME 200 // BRZO clock stretch time #define I2C_SCL_FREQUENCY 1000 // BRZO SCL frequency // ----------------------------------------------------------------------------- // DOMOTICZ // ----------------------------------------------------------------------------- #ifndef DOMOTICZ_SUPPORT #define DOMOTICZ_SUPPORT 1 // Build with domoticz support #endif #define DOMOTICZ_ENABLED 0 // Disable domoticz by default #define DOMOTICZ_IN_TOPIC "domoticz/in" // Default subscription topic #define DOMOTICZ_OUT_TOPIC "domoticz/out" // Default publication topic #define DOMOTICZ_SKIP_TIME 2 // Avoid recursion skipping messages to same IDX within 2 seconds // ----------------------------------------------------------------------------- // HOME ASSISTANT // ----------------------------------------------------------------------------- #ifndef HOMEASSISTANT_SUPPORT #define HOMEASSISTANT_SUPPORT 1 // Build with home assistant support #endif #define HOMEASSISTANT_ENABLED 0 // Integration not enabled by default #define HOMEASSISTANT_PREFIX "homeassistant" // Default MQTT prefix // ----------------------------------------------------------------------------- // INFLUXDB // ----------------------------------------------------------------------------- #ifndef INFLUXDB_SUPPORT #define INFLUXDB_SUPPORT 1 // Enable InfluxDB support by default #endif #define INFLUXDB_PORT 8086 // Default InfluxDB port // ----------------------------------------------------------------------------- // NTP // ----------------------------------------------------------------------------- #ifndef NTP_SUPPORT #define NTP_SUPPORT 1 // Build with NTP support by default #endif #define NTP_SERVER "pool.ntp.org" // Default NTP server #define NTP_TIME_OFFSET 1 // Default timezone offset (GMT+1) #define NTP_DAY_LIGHT true // Enable daylight time saving by default #define NTP_UPDATE_INTERVAL 1800 // NTP check every 30 minutes // ----------------------------------------------------------------------------- // FAUXMO // ----------------------------------------------------------------------------- // This setting defines whether Alexa support should be built into the firmware #ifndef ALEXA_SUPPORT #define ALEXA_SUPPORT 1 #endif // This is default value for the alexaEnabled setting that defines whether // this device should be discoberable and respond to Alexa commands. // Both ALEXA_SUPPORT and alexaEnabled should be 1 for Alexa support to work. #define ALEXA_ENABLED 1 // ----------------------------------------------------------------------------- // RFBRIDGE // ----------------------------------------------------------------------------- #define RF_SEND_TIMES 4 // How many times to send the message #define RF_SEND_DELAY 250 // Interval between sendings in ms #define RF_RECEIVE_DELAY 500 // Interval between recieving in ms (avoid debouncing) // ----------------------------------------------------------------------------- // IR // ----------------------------------------------------------------------------- #ifndef IR_SUPPORT #define IR_SUPPORT 0 // Do not build with IR support by default #endif #ifndef IR_PIN #define IR_PIN 4 // IR LED #endif // 24 Buttons Set of the IR Remote #ifndef IR_BUTTON_SET #define IR_BUTTON_SET 1 // IR button set to use (see below) #endif // IR Button modes #define IR_BUTTON_MODE_NONE 0 #define IR_BUTTON_MODE_RGB 1 #define IR_BUTTON_MODE_HSV 2 #define IR_BUTTON_MODE_BRIGHTER 3 #define IR_BUTTON_MODE_STATE 4 #define IR_BUTTON_MODE_EFFECT 5 #define LIGHT_EFFECT_SOLID 0 #define LIGHT_EFFECT_FLASH 1 #define LIGHT_EFFECT_STROBE 2 #define LIGHT_EFFECT_FADE 3 #define LIGHT_EFFECT_SMOOTH 4 //Remote Buttons SET 1 (for the original Remote shipped with the controller) #if IR_BUTTON_SET == 1 #define IR_BUTTON_COUNT 24 const unsigned long IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = { { 0xFF906F, IR_BUTTON_MODE_BRIGHTER, 1 }, { 0xFFB847, IR_BUTTON_MODE_BRIGHTER, 0 }, { 0xFFF807, IR_BUTTON_MODE_STATE, 0 }, { 0xFFB04F, IR_BUTTON_MODE_STATE, 1 }, { 0xFF9867, IR_BUTTON_MODE_RGB, 0xFF0000 }, { 0xFFD827, IR_BUTTON_MODE_RGB, 0x00FF00 }, { 0xFF8877, IR_BUTTON_MODE_RGB, 0x0000FF }, { 0xFFA857, IR_BUTTON_MODE_RGB, 0xFFFFFF }, { 0xFFE817, IR_BUTTON_MODE_RGB, 0xD13A01 }, { 0xFF48B7, IR_BUTTON_MODE_RGB, 0x00E644 }, { 0xFF6897, IR_BUTTON_MODE_RGB, 0x0040A7 }, { 0xFFB24D, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FLASH }, { 0xFF02FD, IR_BUTTON_MODE_RGB, 0xE96F2A }, { 0xFF32CD, IR_BUTTON_MODE_RGB, 0x00BEBF }, { 0xFF20DF, IR_BUTTON_MODE_RGB, 0x56406F }, { 0xFF00FF, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_STROBE }, { 0xFF50AF, IR_BUTTON_MODE_RGB, 0xEE9819 }, { 0xFF7887, IR_BUTTON_MODE_RGB, 0x00799A }, { 0xFF708F, IR_BUTTON_MODE_RGB, 0x944E80 }, { 0xFF58A7, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FADE }, { 0xFF38C7, IR_BUTTON_MODE_RGB, 0xFFFF00 }, { 0xFF28D7, IR_BUTTON_MODE_RGB, 0x0060A1 }, { 0xFFF00F, IR_BUTTON_MODE_RGB, 0xEF45AD }, { 0xFF30CF, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_SMOOTH } }; #endif //Remote Buttons SET 2 (another identical IR Remote shipped with another controller) #if IR_BUTTON_SET == 2 #define IR_BUTTON_COUNT 24 const unsigned long IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = { { 0xFF00FF, IR_BUTTON_MODE_BRIGHTER, 1 }, { 0xFF807F, IR_BUTTON_MODE_BRIGHTER, 0 }, { 0xFF40BF, IR_BUTTON_MODE_STATE, 0 }, { 0xFFC03F, IR_BUTTON_MODE_STATE, 1 }, { 0xFF20DF, IR_BUTTON_MODE_RGB, 0xFF0000 }, { 0xFFA05F, IR_BUTTON_MODE_RGB, 0x00FF00 }, { 0xFF609F, IR_BUTTON_MODE_RGB, 0x0000FF }, { 0xFFE01F, IR_BUTTON_MODE_RGB, 0xFFFFFF }, { 0xFF10EF, IR_BUTTON_MODE_RGB, 0xD13A01 }, { 0xFF906F, IR_BUTTON_MODE_RGB, 0x00E644 }, { 0xFF50AF, IR_BUTTON_MODE_RGB, 0x0040A7 }, { 0xFFD02F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FLASH }, { 0xFF30CF, IR_BUTTON_MODE_RGB, 0xE96F2A }, { 0xFFB04F, IR_BUTTON_MODE_RGB, 0x00BEBF }, { 0xFF708F, IR_BUTTON_MODE_RGB, 0x56406F }, { 0xFFF00F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_STROBE }, { 0xFF08F7, IR_BUTTON_MODE_RGB, 0xEE9819 }, { 0xFF8877, IR_BUTTON_MODE_RGB, 0x00799A }, { 0xFF48B7, IR_BUTTON_MODE_RGB, 0x944E80 }, { 0xFFC837, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FADE }, { 0xFF28D7, IR_BUTTON_MODE_RGB, 0xFFFF00 }, { 0xFFA857, IR_BUTTON_MODE_RGB, 0x0060A1 }, { 0xFF6897, IR_BUTTON_MODE_RGB, 0xEF45AD }, { 0xFFE817, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_SMOOTH } }; #endif