// ----------------------------------------------------------------------------- // Configuration HELP // ----------------------------------------------------------------------------- // // MANUFACTURER: Name of the manufacturer of the board ("string") // DEVICE: Name of the device ("string") // BUTTON#_PIN: GPIO for the n-th button (1-based, up to 4 buttons) // BUTTON#_RELAY: Relay number that will be bind to the n-th button (1-based) // BUTTON#_MODE: A mask of options (BUTTON_PUSHBUTTON and BUTTON_SWITCH cannot be together) // - BUTTON_PUSHBUTTON: button event is fired when released // - BUTTON_SWITCH: button event is fired when pressed or released // - BUTTON_DEFAULT_HIGH: there is a pull up in place // - BUTTON_SET_PULLUP: set pullup by software // RELAY#_PIN: GPIO for the n-th relay (1-based, up to 4 relays) // RELAY#_PIN_INVERSE: Relay has inversed logic (closed or ON when pulled down) // RELAY#_LED: LED number that will be bind to the n-th relay (1-based) // LED#_PIN: GPIO for the n-th LED (1-based, up to 4 LEDs) // LED#_PIN_INVERSE: LED has inversed logic (lit when pulled down) // WIFI_LED: LED number that will used for WIFI notifications (1-based, defaults to 1) // ----------------------------------------------------------------------------- // Development boards // ----------------------------------------------------------------------------- #if defined(NODEMCUV2) #define MANUFACTURER "NODEMCU" #define DEVICE "LOLIN" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_LNGCLICK BUTTON_MODE_PULSE #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 2 #define LED1_PIN_INVERSE 1 #elif defined(D1_RELAYSHIELD) #define MANUFACTURER "WEMOS" #define DEVICE "D1_MINI" #define RELAY1_PIN 5 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 2 #define LED1_PIN_INVERSE 1 // ----------------------------------------------------------------------------- // ESPurna // ----------------------------------------------------------------------------- #elif defined(ESPURNA_H) #define MANUFACTURER "TINKERMAN" #define DEVICE "ESPURNA_H" #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 1 #define LED1_PIN 5 #define LED1_PIN_INVERSE 0 #define BUTTON1_PIN 4 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define ENABLE_HLW8012 1 // ----------------------------------------------------------------------------- // Itead Studio boards // ----------------------------------------------------------------------------- #elif defined(SONOFF) #define MANUFACTURER "ITEAD" #define DEVICE "SONOFF" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 13 #define LED1_PIN_INVERSE 1 #elif defined(SONOFF_TH) #define MANUFACTURER "ITEAD" #define DEVICE "SONOFF_TH" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 13 #define LED1_PIN_INVERSE 1 #elif defined(SONOFF_SV) #define MANUFACTURER "ITEAD" #define DEVICE "SONOFF_SV" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 13 #define LED1_PIN_INVERSE 1 #elif defined(SLAMPHER) #define MANUFACTURER "ITEAD" #define DEVICE "SLAMPHER" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 13 #define LED1_PIN_INVERSE 1 #elif defined(S20) #define MANUFACTURER "ITEAD" #define DEVICE "S20" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 13 #define LED1_PIN_INVERSE 1 #elif defined(SONOFF_TOUCH) #define MANUFACTURER "ITEAD" #define DEVICE "SONOFF_TOUCH" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 13 #define LED1_PIN_INVERSE 1 #elif defined(SONOFF_POW) #define MANUFACTURER "ITEAD" #define DEVICE "SONOFF_POW" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 15 #define LED1_PIN_INVERSE 0 #define ENABLE_HLW8012 1 #elif defined(SONOFF_DUAL) #define MANUFACTURER "ITEAD" #define DEVICE "SONOFF_DUAL" #define BUTTON3_RELAY 1 #define LED1_PIN 13 #define LED1_PIN_INVERSE 1 #undef SERIAL_BAUDRATE #define SERIAL_BAUDRATE 19230 #undef RELAY_PROVIDER #define RELAY_PROVIDER RELAY_PROVIDER_DUAL #elif defined(SONOFF_4CH) #define MANUFACTURER "ITEAD" #define DEVICE "SONOFF_4CH" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define BUTTON2_PIN 9 #define BUTTON2_RELAY 2 #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define BUTTON3_PIN 10 #define BUTTON3_RELAY 3 #define BUTTON3_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define BUTTON4_PIN 14 #define BUTTON4_RELAY 4 #define BUTTON4_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define RELAY2_PIN 5 #define RELAY2_PIN_INVERSE 0 #define RELAY3_PIN 4 #define RELAY3_PIN_INVERSE 0 #define RELAY4_PIN 15 #define RELAY4_PIN_INVERSE 0 #define LED1_PIN 13 #define LED1_PIN_INVERSE 1 #elif defined(ITEAD_1CH_INCHING) // The inching functionality is managed by a misterious IC in the board. // You cannot control the inching button and functionality from the ESP8266 // Besides, enabling the inching functionality using the hardware button // will result in the relay switching on and off continuously. // Fortunately the unkown IC keeps memory of the hardware inching status // so you can just disable it and forget. The inching LED must be lit. // You can still use the pulse options from the web interface // without problem. #define MANUFACTURER "ITEAD" #define DEVICE "1CH_INCHING" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 13 #define LED1_PIN_INVERSE 1 #elif defined(ITEAD_MOTOR) #define MANUFACTURER "ITEAD" #define DEVICE "MOTOR" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 13 #define LED1_PIN_INVERSE 1 // ----------------------------------------------------------------------------- // Electrodragon boards // ----------------------------------------------------------------------------- #elif defined(ESP_RELAY_BOARD) #define MANUFACTURER "ELECTRODRAGON" #define DEVICE "ESP_RELAY_BOARD" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define BUTTON2_PIN 2 #define BUTTON2_RELAY 2 #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define RELAY2_PIN 13 #define RELAY2_PIN_INVERSE 0 #define LED1_PIN 16 #define LED1_PIN_INVERSE 0 // ----------------------------------------------------------------------------- // WorkChoice ecoPlug // ----------------------------------------------------------------------------- #elif defined(ECOPLUG) #define MANUFACTURER "WORKCHOICE" #define DEVICE "ECOPLUG" #define BUTTON1_PIN 13 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 15 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 2 #define LED1_PIN_INVERSE 0 // ----------------------------------------------------------------------------- // AI Thinker // ----------------------------------------------------------------------------- #elif defined(AI_LIGHT) #define MANUFACTURER "AI_THINKER" #define DEVICE "AI_LIGHT" #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT #define LIGHT_PROVIDER LIGHT_PROVIDER_MY9192 // ----------------------------------------------------------------------------- // LED Controller // ----------------------------------------------------------------------------- #elif defined(LED_CONTROLLER) #define MANUFACTURER "MAGIC_HOME" #define DEVICE "LED_CONTROLLER" #define LED1_PIN 2 #define LED1_PIN_INVERSE 1 #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT #define LIGHT_PROVIDER LIGHT_PROVIDER_RGB #undef RGBW_INVERSE_LOGIC #undef RGBW_RED_PIN #undef RGBW_GREEN_PIN #undef RGBW_BLUE_PIN #undef RGBW_WHITE_PIN #define RGBW_INVERSE_LOGIC 1 #define RGBW_RED_PIN 14 #define RGBW_GREEN_PIN 5 #define RGBW_BLUE_PIN 12 #define RGBW_WHITE_PIN 13 // ----------------------------------------------------------------------------- // HUACANXING H801 // ----------------------------------------------------------------------------- #elif defined(H801_LED_CONTROLLER) #define MANUFACTURER "HUACANXING" #define DEVICE "H801" #define LED1_PIN 5 #define LED1_PIN_INVERSE 1 #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT #define LIGHT_PROVIDER LIGHT_PROVIDER_RGB2W #undef RGBW_INVERSE_LOGIC #undef RGBW_RED_PIN #undef RGBW_GREEN_PIN #undef RGBW_BLUE_PIN #undef RGBW_WHITE_PIN #define RGBW_INVERSE_LOGIC 1 #define RGBW_RED_PIN 15 #define RGBW_GREEN_PIN 13 #define RGBW_BLUE_PIN 12 #define RGBW_WHITE_PIN 14 #define RGBW_WHITE2_PIN 4 // ----------------------------------------------------------------------------- // Jan Goedeke Wifi Relay // https://github.com/JanGoe/esp8266-wifi-relay // ----------------------------------------------------------------------------- #elif defined(WIFI_RELAY_NC) #define MANUFACTURER "JAN_GOEDEKE" #define DEVICE "WIFI_RELAY_NC" #define BUTTON1_PIN 12 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define BUTTON2_PIN 13 #define BUTTON2_RELAY 2 #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 2 #define RELAY1_PIN_INVERSE 1 #define RELAY2_PIN 14 #define RELAY2_PIN_INVERSE 1 #elif defined(WIFI_RELAY_NO) #define MANUFACTURER "JAN_GOEDEKE" #define DEVICE "WIFI_RELAY_NO" #define BUTTON1_PIN 12 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define BUTTON2_PIN 13 #define BUTTON2_RELAY 2 #define BUTTON2_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 2 #define RELAY1_PIN_INVERSE 0 #define RELAY2_PIN 14 #define RELAY2_PIN_INVERSE 0 // ----------------------------------------------------------------------------- // Jorge García Wifi+Relays Board Kit // https://www.tindie.com/products/jorgegarciadev/wifi--relays-board-kit // https://github.com/jorgegarciadev/wifikit // ----------------------------------------------------------------------------- #elif defined(WIFI_RELAYS_BOARD_KIT) #define MANUFACTURER "JORGE_GARCIA" #define DEVICE "WIFI_RELAYS_BOARD_KIT" #define RELAY1_PIN 0 #define RELAY1_PIN_INVERSE 1 #define RELAY2_PIN 2 #define RELAY2_PIN_INVERSE 1 // ----------------------------------------------------------------------------- // WiFi MQTT Relay / Thermostat // ----------------------------------------------------------------------------- #elif defined(MQTT_RELAY) #define MANUFACTURER "OPENENERGYMONITOR" #define DEVICE "MQTT_RELAY" #define BUTTON1_PIN 0 #define BUTTON1_RELAY 1 #define BUTTON1_MODE BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH #define RELAY1_PIN 12 #define RELAY1_PIN_INVERSE 0 #define LED1_PIN 16 #define LED1_PIN_INVERSE 0 // ----------------------------------------------------------------------------- // Unknown hardware // ----------------------------------------------------------------------------- #else #error "UNSUPPORTED HARDWARE!" #endif // ----------------------------------------------------------------------------- // Default values // ----------------------------------------------------------------------------- #ifndef BUTTON1_PRESS #define BUTTON1_PRESS BUTTON_MODE_NONE #endif #ifndef BUTTON2_PRESS #define BUTTON2_PRESS BUTTON_MODE_NONE #endif #ifndef BUTTON3_PRESS #define BUTTON3_PRESS BUTTON_MODE_NONE #endif #ifndef BUTTON4_PRESS #define BUTTON4_PRESS BUTTON_MODE_NONE #endif #ifndef BUTTON1_CLICK #define BUTTON1_CLICK BUTTON_MODE_TOGGLE #endif #ifndef BUTTON2_CLICK #define BUTTON2_CLICK BUTTON_MODE_TOGGLE #endif #ifndef BUTTON3_CLICK #define BUTTON3_CLICK BUTTON_MODE_TOGGLE #endif #ifndef BUTTON4_CLICK #define BUTTON4_CLICK BUTTON_MODE_TOGGLE #endif #ifndef BUTTON1_DBLCLICK #define BUTTON1_DBLCLICK BUTTON_MODE_AP #endif #ifndef BUTTON2_DBLCLICK #define BUTTON2_DBLCLICK BUTTON_MODE_NONE #endif #ifndef BUTTON3_DBLCLICK #define BUTTON3_DBLCLICK BUTTON_MODE_NONE #endif #ifndef BUTTON4_DBLCLICK #define BUTTON4_DBLCLICK BUTTON_MODE_NONE #endif #ifndef BUTTON1_LNGCLICK #define BUTTON1_LNGCLICK BUTTON_MODE_RESET #endif #ifndef BUTTON2_LNGCLICK #define BUTTON2_LNGCLICK BUTTON_MODE_NONE #endif #ifndef BUTTON3_LNGCLICK #define BUTTON3_LNGCLICK BUTTON_MODE_NONE #endif #ifndef BUTTON4_LNGCLICK #define BUTTON4_LNGCLICK BUTTON_MODE_NONE #endif #ifndef BUTTON1_LNGLNGCLICK #define BUTTON1_LNGLNGCLICK BUTTON_MODE_FACTORY #endif #ifndef BUTTON2_LNGLNGCLICK #define BUTTON2_LNGLNGCLICK BUTTON_MODE_NONE #endif #ifndef BUTTON3_LNGLNGCLICK #define BUTTON3_LNGLNGCLICK BUTTON_MODE_NONE #endif #ifndef BUTTON4_LNGLNGCLICK #define BUTTON4_LNGLNGCLICK BUTTON_MODE_NONE #endif #ifndef BUTTON1_RELAY #define BUTTON1_RELAY 0 #endif #ifndef BUTTON2_RELAY #define BUTTON2_RELAY 0 #endif #ifndef BUTTON3_RELAY #define BUTTON3_RELAY 0 #endif #ifndef BUTTON4_RELAY #define BUTTON4_RELAY 0 #endif #ifndef RELAY1_LED #define RELAY1_LED 0 #endif #ifndef RELAY2_LED #define RELAY2_LED 0 #endif #ifndef RELAY3_LED #define RELAY3_LED 0 #endif #ifndef RELAY4_LED #define RELAY4_LED 0 #endif #ifndef WIFI_LED #define WIFI_LED 1 #endif // Needed for ESP8285 boards under Windows using PlatformIO (?) #ifndef BUTTON_PUSHBUTTON #define BUTTON_PUSHBUTTON 0 #define BUTTON_SWITCH 1 #define BUTTON_DEFAULT_HIGH 2 #define BUTTON_SET_PULLUP 4 #endif // Relay providers #ifndef RELAY_PROVIDER #define RELAY_PROVIDER RELAY_PROVIDER_RELAY #endif // Light provider #ifndef LIGHT_PROVIDER #define LIGHT_PROVIDER LIGHT_PROVIDER_NONE #endif