// ----------------------------------------------------------------------------- // Devices // ----------------------------------------------------------------------------- // New devices have to be added just before the DEVICE_LAST line, // then add configuration in the hardware.ino enum devices { DEVICE_UNKNOWN, DEVICE_CUSTOM, DEVICE_NODEMCU_LOLIN, DEVICE_WEMOS_D1_MINI_RELAYSHIELD, DEVICE_ITEAD_SONOFF_BASIC, DEVICE_ITEAD_SONOFF_TH, DEVICE_ITEAD_SONOFF_SV, DEVICE_ITEAD_SONOFF_TOUCH, DEVICE_ITEAD_SONOFF_POW, DEVICE_ITEAD_SONOFF_DUAL, DEVICE_ITEAD_1CH_INCHING, DEVICE_ITEAD_SONOFF_4CH, DEVICE_ITEAD_SLAMPHER, DEVICE_ITEAD_S20, DEVICE_ELECTRODRAGON_WIFI_IOT, DEVICE_WORKCHOICE_ECOPLUG, DEVICE_JANGOE_WIFI_RELAY_NC, DEVICE_JANGOE_WIFI_RELAY_NO, DEVICE_OPENENERGYMONITOR_MQTT_RELAY, DEVICE_JORGEGARCIA_WIFI_RELAYS, DEVICE_AITHINKER_AI_LIGHT, DEVICE_MAGICHOME_LED_CONTROLLER, DEVICE_ITEAD_MOTOR, DEVICE_TINKERMAN_ESPURNA_H06, DEVICE_HUACANXING_H801, DEVICE_ITEAD_BNSZ01, DEVICE_ITEAD_SONOFF_RFBRIDGE, DEVICE_ITEAD_SONOFF_4CH_PRO, DEVICE_ITEAD_SONOFF_B1, DEVICE_ITEAD_SONOFF_LED, DEVICE_ITEAD_SONOFF_T1_1CH, DEVICE_ITEAD_SONOFF_T1_2CH, DEVICE_ITEAD_SONOFF_T1_3CH, DEVICE_ITEAD_SONOFF_RF, DEVICE_WION_50055, DEVICE_EXS_WIFI_RELAY_V31, DEVICE_HUACANXING_H802, DEVICE_GENERIC_V9261F, DEVICE_GENERIC_ECH1560, DEVICE_TINKERMAN_ESPURNA_H08, DEVICE_MANCAVEMADE_ESPLIVE, DEVICE_INTERMITTECH_QUINLED, DEVICE_MAGICHOME_LED_CONTROLLER_20, DEVICE_ARILUX_AL_LC06, DEVICE_XENON_SM_PW702U, DEVICE_AUTHOMETION_LYT8266, DEVICE_ARILUX_E27, DEVICE_YJZK_SWITCH_2CH, DEVICE_ITEAD_SONOFF_DUAL_R2, DEVICE_GENERIC_8CH, DEVICE_ARILUX_AL_LC01, DEVICE_ARILUX_AL_LC11, DEVICE_ARILUX_AL_LC02, DEVICE_KMC_70011, DEVICE_GIZWITS_WITTY_CLOUD, DEVICE_EUROMATE_WIFI_STECKER_SCHUKO, DEVICE_TONBUX_POWERSTRIP02, DEVICE_LINGAN_SWA1, DEVICE_HEYGO_HY02, DEVICE_MAXCIO_WUS002S, DEVICE_YIDIAN_XSSSA05, DEVICE_TONBUX_XSSSA06, DEVICE_GREEN_ESP8266RELAY, DEVICE_IKE_ESPIKE, DEVICE_ARNIEX_SWIFITCH, DEVICE_GENERIC_ESP01S_RELAY_V40, DEVICE_GENERIC_ESP01S_RGBLED_V10, DEVICE_HELTEC_TOUCHRELAY, DEVICE_GENERIC_ESP01S_DHT11_V10, DEVICE_GENERIC_ESP01S_DS18B20_V10, DEVICE_ZHILDE_EU44_W, DEVICE_ITEAD_SONOFF_POW_R2, DEVICE_LUANI_HVIO, DEVICE_ALLNET_4DUINO_IOT_WLAN_RELAIS, DEVICE_TONBUX_MOSQUITO_KILLER, DEVICE_NEO_COOLCAM_NAS_WR01W, DEVICE_PILOTAK_ESP_DIN_V1, DEVICE_ESTINK_WIFI_POWER_STRIP, DEVICE_BH_ONOFRE, DEVICE_BLITZWOLF_BWSHP2, DEVICE_TINKERMAN_ESPURNA_SWITCH, DEVICE_ITEAD_SONOFF_S31, DEVICE_STM_RELAY, DEVICE_VANZAVANZU_SMART_WIFI_PLUG_MINI, DEVICE_GENERIC_GEIGER_COUNTER, DEVICE_TINKERMAN_RFM69GW, DEVICE_ITEAD_SONOFF_IFAN02, DEVICE_GENERIC_AG_L4, DEVICE_HOMECUBE_16A, DEVICE_ALLTERCO_SHELLY1, DEVICE_LOHAS_9W, DEVICE_YJZK_SWITCH_1CH, DEVICE_YJZK_SWITCH_3CH, DEVICE_XIAOMI_SMART_DESK_LAMP, DEVICE_ALLTERCO_SHELLY2, DEVICE_PHYX_ESP12_RGB, DEVICE_IWOOLE_LED_TABLE_LAMP, DEVICE_EXS_WIFI_RELAY_V50, DEVICE_BESTEK_MRJ1011, DEVICE_LAST }; // ----------------------------------------------------------------------------- // Board => Image type // ----------------------------------------------------------------------------- #if \ defined(ALLNET_4DUINO_IOT_WLAN_RELAIS) || \ defined(ALLTERCO_SHELLY1) || \ defined(ARNIEX_SWIFITCH) || \ defined(BH_ONOFRE) || \ defined(BESTEK_MRJ1011) || \ defined(ELECTRODRAGON_WIFI_IOT) || \ defined(ESTINK_WIFI_POWER_STRIP) || \ defined(EUROMATE_WIFI_STECKER_SCHUKO) || \ defined(EXS_WIFI_RELAY_V31) || \ defined(EXS_WIFI_RELAY_V50) || \ defined(GENERIC_8CH) || \ defined(GENERIC_ESP01S_RELAY_V40) || \ defined(GENERIC_ESP01S_RGBLED_V10) || \ defined(GREEN_ESP8266RELAY) || \ defined(HELTEC_TOUCHRELAY) || \ defined(HEYGO_HY02) || \ defined(IKE_ESPIKE) || \ defined(ITEAD_1CH_INCHING) || \ defined(ITEAD_MOTOR) || \ defined(ITEAD_S20) || \ defined(ITEAD_SLAMPHER) || \ defined(ITEAD_SONOFF_4CH) || \ defined(ITEAD_SONOFF_4CH_PRO) || \ defined(ITEAD_SONOFF_BASIC) || \ defined(ITEAD_SONOFF_DUAL_R2) || \ defined(ITEAD_SONOFF_IFAN02) || \ defined(ITEAD_SONOFF_RF) || \ defined(ITEAD_SONOFF_SV) || \ defined(ITEAD_SONOFF_T1_1CH) || \ defined(ITEAD_SONOFF_T1_2CH) || \ defined(ITEAD_SONOFF_T1_3CH) || \ defined(ITEAD_SONOFF_TOUCH) || \ defined(JANGOE_WIFI_RELAY_NC) || \ defined(JANGOE_WIFI_RELAY_NO) || \ defined(JORGEGARCIA_WIFI_RELAYS) || \ defined(LINGAN_SWA1) || \ defined(LUANI_HVIO) || \ defined(NEO_COOLCAM_NAS_WR01W) || \ defined(NODEMCU_LOLIN) || \ defined(OPENENERGYMONITOR_MQTT_RELAY) || \ defined(TINKERMAN_ESPURNA_SWITCH) || \ defined(TONBUX_MOSQUITO_KILLER) || \ defined(TONBUX_POWERSTRIP02) || \ defined(TONBUX_XSSSA06) || \ defined(WEMOS_D1_MINI_RELAYSHIELD) || \ defined(WION_50055) || \ defined(WORKCHOICE_ECOPLUG) || \ defined(XENON_SM_PW702U) || \ defined(YJZK_SWITCH_1CH) || \ defined(YJZK_SWITCH_2CH) || \ defined(YJZK_SWITCH_3CH) || \ defined(ZHILDE_EU44_W) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_BASIC // ----------------------------------------------------------------------------- #elif \ defined(BLITZWOLF_BWSHP2) || \ defined(HOMECUBE_16A) || \ defined(ITEAD_SONOFF_POW) || \ defined(KMC_70011) || \ defined(MAXCIO_WUS002S) || \ defined(TINKERMAN_ESPURNA_H06) || \ defined(TINKERMAN_ESPURNA_H08) || \ defined(VANZAVANZU_SMART_WIFI_PLUG_MINI) || \ defined(YIDIAN_XSSSA05) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_HLW8012 // ----------------------------------------------------------------------------- #elif \ defined(ITEAD_SONOFF_POW_R2) || \ defined(ITEAD_SONOFF_S31) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_CSE77XX // ----------------------------------------------------------------------------- #elif defined(GENERIC_V9261F) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_V9261F // ----------------------------------------------------------------------------- #elif defined(GENERIC_ECH1560) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_ECH1560 // ----------------------------------------------------------------------------- #elif \ defined(ARILUX_AL_LC01) || \ defined(ARILUX_AL_LC02) || \ defined(ARILUX_AL_LC06) || \ defined(ARILUX_AL_LC11) || \ defined(AUTHOMETION_LYT8266) || \ defined(GENERIC_AG_L4) || \ defined(HUACANXING_H801) || \ defined(HUACANXING_H802) || \ defined(INTERMITTECH_QUINLED) || \ defined(ITEAD_BNSZ01) || \ defined(ITEAD_SONOFF_LED) || \ defined(IWOOLE_LED_TABLE_LAMP) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_DIMMER // ----------------------------------------------------------------------------- #elif \ defined(AITHINKER_AI_LIGHT) || \ defined(ARILUX_E27) || \ defined(ITEAD_SONOFF_B1) || \ defined(LOHAS_9W) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_MY92XX // ----------------------------------------------------------------------------- #elif \ defined(GENERIC_ESP01S_DHT11_V10) || \ defined(GENERIC_ESP01S_DS18B20_V10) || \ defined(ITEAD_SONOFF_TH) || \ defined(MANCAVEMADE_ESPLIVE) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_SENSOR // ----------------------------------------------------------------------------- #elif defined(TINKERMAN_RFM69GW) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_RFM69 // ----------------------------------------------------------------------------- #elif defined(ITEAD_SONOFF_DUAL) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_SONOFF_DUAL // ----------------------------------------------------------------------------- #elif defined(STM_RELAY) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_STM // ----------------------------------------------------------------------------- #elif defined(GENERIC_GEIGER_COUNTER) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_GEIGER // ----------------------------------------------------------------------------- // PENDING // ----------------------------------------------------------------------------- #elif defined(ITEAD_SONOFF_RFBRIDGE) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_SONOFF_RFBRIDGE // Info #define RELAY_PROVIDER RELAY_PROVIDER_RFBRIDGE // RFB Direct hack thanks to @wildwiz // https://github.com/xoseperez/espurna/wiki/Hardware-Itead-Sonoff-RF-Bridge---Direct-Hack #ifndef RFB_DIRECT #define RFB_DIRECT 0 #endif #ifndef RFB_RX_PIN #define RFB_RX_PIN 4 // GPIO for RX when RFB_DIRECT #endif #ifndef RFB_TX_PIN #define RFB_TX_PIN 5 // GPIO for TX when RFB_DIRECT #endif // When using un-modified harware, ESPurna communicates with the secondary // MCU EFM8BB1 via UART at 19200 bps so we need to change the speed of // the port and remove UART noise on serial line #if not RFB_DIRECT #define SERIAL_BAUDRATE 19200 #define DEBUG_SERIAL_SUPPORT 0 #endif // ----------------------------------------------------------------------------- #elif defined(PILOTAK_ESP_DIN_V1) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_SENSOR #ifndef RF_SUPPORT #define RF_SUPPORT 1 // Does this need the RFBRIDGE image? #endif #define RF_PIN 14 // ----------------------------------------------------------------------------- #elif defined(MAGICHOME_LED_CONTROLLER) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_DIMMER // IR #define IR_SUPPORT 1 #define IR_RECEIVER_PIN 4 #define IR_BUTTON_SET 1 #elif defined(MAGICHOME_LED_CONTROLLER_20) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_DIMMER // IR #define IR_SUPPORT 1 #define IR_RECEIVER_PIN 4 #define IR_BUTTON_SET 1 #elif defined(GIZWITS_WITTY_CLOUD) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_DIMMER #define ANALOG_SUPPORT 1 // TODO: specific or generic? // ----------------------------------------------------------------------------- // TEST devices (do not use!!) // ----------------------------------------------------------------------------- #elif defined(TRAVIS01) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_BASIC // A bit of I2C - pins 3,4 #define I2C_SDA_PIN 3 #define I2C_SCL_PIN 4 // And, as they say in "From Dusk till Dawn": // This is a sensor blow out! // Alright, we got white sensor, black sensor, spanish sensor, yellow sensor. We got hot sensor, cold sensor. // We got wet sensor. We got smelly sensor. We got hairy sensor, bloody sensor. We got snapping sensor. // We got silk sensor, velvet sensor, naugahyde sensor. We even got horse sensor, dog sensor, chicken sensor. // C'mon, you want sensor, come on in sensor lovers! // If we don’t got it, you don't want it! #define AM2320_SUPPORT 1 #define BH1750_SUPPORT 1 #define BMX280_SUPPORT 1 #define SHT3X_I2C_SUPPORT 1 #define EMON_ADC121_SUPPORT 1 #define EMON_ADS1X15_SUPPORT 1 #define SHT3X_I2C_SUPPORT 1 #define SI7021_SUPPORT 1 #define PMSX003_SUPPORT 1 #define SENSEAIR_SUPPORT 1 // A bit of lights - pin 5 #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER #define DUMMY_RELAY_COUNT 1 #define LIGHT_CHANNELS 1 #define LIGHT_CH1_PIN 5 #define LIGHT_CH1_INVERSE 0 // A bit of HLW8012 - pins 6,7,8 #ifndef HLW8012_SUPPORT #define HLW8012_SUPPORT 1 #endif #define HLW8012_SEL_PIN 6 #define HLW8012_CF1_PIN 7 #define HLW8012_CF_PIN 8 // A bit of Dallas - pin 9 #ifndef DALLAS_SUPPORT #define DALLAS_SUPPORT 1 #endif #define DALLAS_PIN 9 // A bit of ECH1560 - pins 10,11, 12 #ifndef ECH1560_SUPPORT #define ECH1560_SUPPORT 1 #endif #define ECH1560_CLK_PIN 10 #define ECH1560_MISO_PIN 11 #define ECH1560_INVERTED 12 #elif defined(TRAVIS02) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_BASIC // A bit of CSE7766 - pin 1 #ifndef CSE7766_SUPPORT #define CSE7766_SUPPORT 1 #endif #define CSE7766_PIN 1 // Relay type dual - pins 2,3 #define RELAY_PROVIDER RELAY_PROVIDER_DUAL #define RELAY1_PIN 2 #define RELAY2_PIN 3 #define RELAY1_TYPE RELAY_TYPE_NORMAL #define RELAY2_TYPE RELAY_TYPE_NORMAL // IR - pin 4 #define IR_SUPPORT 1 #define IR_RECEIVER_PIN 4 #define IR_BUTTON_SET 1 // A bit of DHT - pin 5 #ifndef DHT_SUPPORT #define DHT_SUPPORT 1 #endif #define DHT_PIN 5 // A bit of TMP3X (analog) #define TMP3X_SUPPORT 1 // A bit of EVENTS - pin 10 #define EVENTS_SUPPORT 1 #define EVENTS_PIN 6 // Sonar #define SONAR_SUPPORT 1 #define SONAR_TRIGGER 7 #define SONAR_ECHO 8 // MHZ19 #define MHZ19_SUPPORT 1 #define MHZ19_RX_PIN 9 #define MHZ19_TX_PIN 10 // PZEM004T #define PZEM004T_SUPPORT 1 #define PZEM004T_RX_PIN 11 #define PZEM004T_TX_PIN 12 // V9261F #define V9261F_SUPPORT 1 #define V9261F_PIN 13 // GUVAS12SD #define GUVAS12SD_SUPPORT 1 #define GUVAS12SD_PIN 14 // Test non-default modules #define MDNS_CLIENT_SUPPORT 1 #define NOFUSS_SUPPORT 1 #define UART_MQTT_SUPPORT 1 #define INFLUXDB_SUPPORT 1 #define IR_SUPPORT 1 #elif defined(TRAVIS03) #undef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_BASIC // MY9231 Light - pins 1,2 #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT #define LIGHT_PROVIDER LIGHT_PROVIDER_MY92XX #define DUMMY_RELAY_COUNT 1 #define LIGHT_CHANNELS 5 #define MY92XX_MODEL MY92XX_MODEL_MY9231 #define MY92XX_CHIPS 2 #define MY92XX_DI_PIN 1 #define MY92XX_DCKI_PIN 2 #define MY92XX_COMMAND MY92XX_COMMAND_DEFAULT #define MY92XX_MAPPING 4, 3, 5, 0, 1 // A bit of Analog EMON (analog) #ifndef EMON_ANALOG_SUPPORT #define EMON_ANALOG_SUPPORT 1 #endif // Test non-default modules #define LLMNR_SUPPORT 1 #define NETBIOS_SUPPORT 1 #define SSDP_SUPPORT 1 // Encoder support #ifndef ENCODER_SUPPORT #define ENCODER_SUPPORT 1 #endif #endif // ----------------------------------------------------------------------------- // ESPurna Core // This is a special device targeted to generate a light-weight binary image // meant to be able to do two-step-updates: // https://github.com/xoseperez/espurna/wiki/TwoStepUpdates // ----------------------------------------------------------------------------- #ifndef ESPURNA_IMAGE #define ESPURNA_IMAGE ESPURNA_CORE #endif // ----------------------------------------------------------------------------- // Image definitions // ----------------------------------------------------------------------------- #if ESPURNA_IMAGE == ESPURNA_CORE #define ESPURNA_IMAGE_NAME "CORE" // Disable non-core modules #define ALEXA_SUPPORT 0 #define API_SUPPORT 0 #define BROKER_SUPPORT 0 #define BUTTON_SUPPORT 0 #define DOMOTICZ_SUPPORT 0 #define HOMEASSISTANT_SUPPORT 0 #define I2C_SUPPORT 0 #define MDNS_SERVER_SUPPORT 0 #define MQTT_SUPPORT 0 #define NTP_SUPPORT 0 #define SCHEDULER_SUPPORT 0 #define SENSOR_SUPPORT 0 #define THINGSPEAK_SUPPORT 0 #define WEB_SUPPORT 0 // Extra light-weight image //#define DEBUG_SERIAL_SUPPORT 0 //#define DEBUG_TELNET_SUPPORT 0 //#define DEBUG_WEB_SUPPORT 0 //#define LED_SUPPORT 0 //#define TELNET_SUPPORT 0 //#define TERMINAL_SUPPORT 0 #elif ESPURNA_IMAGE == ESPURNA_BASIC #define ESPURNA_IMAGE_NAME "BASIC" #elif ESPURNA_IMAGE == ESPURNA_DIMMER #define ESPURNA_IMAGE_NAME "DIMMER" #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT #define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER #ifndef ENCODER_SUPPORT #define ENCODER_SUPPORT 1 #endif #elif ESPURNA_IMAGE == ESPURNA_MY92XX #define ESPURNA_IMAGE_NAME "MY92XX" #define RELAY_PROVIDER RELAY_PROVIDER_LIGHT #define LIGHT_PROVIDER LIGHT_PROVIDER_MY92XX #define MY92XX_COMMAND MY92XX_COMMAND_DEFAULT #ifndef ENCODER_SUPPORT #define ENCODER_SUPPORT 1 #endif #elif ESPURNA_IMAGE == ESPURNA_EMON #define ESPURNA_IMAGE_NAME "EMON" #ifndef EMON_ANALOG_SUPPORT #define EMON_ANALOG_SUPPORT 1 #endif #ifndef EMON_ADC121_SUPPORT #define EMON_ADC121_SUPPORT 1 #endif #ifndef EMON_ADS1X15_SUPPORT #define EMON_ADS1X15_SUPPORT 1 #endif #elif ESPURNA_IMAGE == ESPURNA_HLW8012 #define ESPURNA_IMAGE_NAME "HLW8012" #ifndef HLW8012_SUPPORT #define HLW8012_SUPPORT 1 #endif #elif ESPURNA_IMAGE == ESPURNA_CSE77XX #define ESPURNA_IMAGE_NAME "CSE77XX" #ifndef CSE7766_SUPPORT #define CSE7766_SUPPORT 1 #endif #elif ESPURNA_IMAGE == ESPURNA_V9261F #define ESPURNA_IMAGE_NAME "V9261F" #ifndef V9261F_SUPPORT #define V9261F_SUPPORT 1 #endif #ifndef ALEXA_SUPPORT #define ALEXA_SUPPORT 0 #endif #elif ESPURNA_IMAGE == ESPURNA_ECH1560 #define ESPURNA_IMAGE_NAME "ECH1560" #ifndef ECH1560_SUPPORT #define ECH1560_SUPPORT 1 #endif #ifndef ALEXA_SUPPORT #define ALEXA_SUPPORT 0 #endif #elif ESPURNA_IMAGE == ESPURNA_SENSOR #define ESPURNA_IMAGE_NAME "SENSOR" #ifndef ANALOG_SUPPORT #define ANALOG_SUPPORT 1 #endif #ifndef DALLAS_SUPPORT #define DALLAS_SUPPORT 1 #endif #ifndef DHT_SUPPORT #define DHT_SUPPORT 1 #endif #ifndef DIGITAL_SUPPORT #define DIGITAL_SUPPORT 1 #endif #elif ESPURNA_IMAGE == ESPURNA_SONOFF_DUAL #define ESPURNA_IMAGE_NAME "SONOFF_DUAL" #define RELAY_PROVIDER RELAY_PROVIDER_DUAL #elif ESPURNA_IMAGE == ESPURNA_SONOFF_RFBRIDGE #define ESPURNA_IMAGE_NAME "SONOFF_RFBRIDGE" #elif ESPURNA_IMAGE == ESPURNA_RFM69 #define ESPURNA_IMAGE_NAME "RFM69" // RFM69GW #define RFM69_SUPPORT 1 // Disable non-core modules #define ALEXA_SUPPORT 0 #define DOMOTICZ_SUPPORT 0 #define HOMEASSISTANT_SUPPORT 0 #define I2C_SUPPORT 0 #define SCHEDULER_SUPPORT 0 #define SENSOR_SUPPORT 0 #define THINGSPEAK_SUPPORT 0 #elif ESPURNA_IMAGE == ESPURNA_STM #define ESPURNA_IMAGE_NAME "STM" #define RELAY_PROVIDER RELAY_PROVIDER_STM #elif ESPURNA_IMAGE == ESPURNA_GEIGER #define ESPURNA_IMAGE_NAME "GEIGER" // Enable Geiger Counter #define GEIGER_SUPPORT 1 // Disable uneeded modules #define ALEXA_SUPPORT 0 #define SCHEDULER_SUPPORT 0 #endif