# ESPurna Firmware ESPurna ("spark" in Catalan) is a custom firmware for ESP8266 based smart switches. It was originally developed with the **[IteadStudio Sonoff](https://www.itead.cc/sonoff-wifi-wireless-switch.html)** in mind but now it supports a growing number of ESP8266-based boards. It uses the Arduino Core for ESP8266 framework and a number of 3rd party libraries. > **Current Release Version is 1.9.6**, read the [changelog](https://bitbucket.org/xoseperez/espurna/src/master/CHANGELOG.md). > **NOTICE**: Default flash layout changed in 1.8.3, as an unpredicted consequence devices will not be able to persist/retrieve configuration if flashed with 1.8.3 via **OTA** from **PlatformIO**. Please check issue #187. > **NOTICE**: since version 1.9.0 the default **MQTT topics for commands have changed**. They all now end with "/set". This means you will have to change your controller software (Node-RED or alike) to send messages to -for instance- "/home/living/light/relay/0/set". The device will publish its state in "/home/living/light/relay/0" like before. ## Features * *KRACK* vulnerability free * Support for **multiple ESP8266-based boards** ([check list](https://bitbucket.org/xoseperez/espurna/wiki/Hardware)) * Wifi **AP Mode** or **STA mode** * Up to 5 different networks can be defined * Supports static IP * Scans for strongest network if more than one defined * Defaults to AP mode (also available after double clicking the main button) * Switch management * Support for **push buttons** and **toggle switches** * Configurable **status on boot** (always ON, always OFF, same as before or toggle) * Support for **pulse mode** (normally ON or normally OFF) with configurable time * Support for **relay synchronization** (all equal, only one ON, one and only on ON) * Support for **delayed ON/OFF** * **MQTT** enabled * **SSL/TLS support** (not on regular builds, see #64) * Switch on/off and toggle relays * Report button event notifications * Enable/disable pulse mode * Change LED notification mode * Remote reset the board * **Alexa** integration using the [FauxmoESP Library](https://bitbucket.org/xoseperez/fauxmoesp) * [**Google Assistant**](http://tinkerman.cat/using-google-assistant-control-your-esp8266-devices/) integration using IFTTT and Webhooks (Google Home, Allo) * [**Domoticz**](https://domoticz.com/) integration via MQTT * [**Home Assistant**](https://home-assistant.io/) integration via MQTT * Supports MQTT auto-discover feature (switches and lights) * [**InfluxDB**](https://www.influxdata.com/) integration via HTTP API * Support for different **sensors** * DHT11 / DHT22 / DHT21 / AM2301 (supports celsius & fahrenheit reporting) * DS18B20 (supports celsius & fahrenheit reporting) * HLW8012 using the [HLW8012 Library](https://bitbucket.org/xoseperez/hlw8012) (Sonoff POW) * Non-invasive current sensor using the [EmonLiteESP Library](https://bitbucket.org/xoseperez/emonliteesp) (requires some hacking) * Raw analog sensor * Fast asynchronous **HTTP Server** * Configurable port * Basic authentication * Web-based configuration * Relay switching and sensor data from the web interface * Handle color, brightness, and white/warm channels for lights * Websockets-based communication between the device and the browser * Backup and restore settings option * Upgrade firmware from the web interface * Works great behind a [secured reverse proxy](http://tinkerman.cat/secure-remote-access-to-your-iot-devices/) * **REST API** (enable/disable from web interface) * GET and PUT relay status * Change light color (for supported hardware) * GET sensor data (power, current, voltage, temperature and humidity) depending on the available hardware * Works great behind a secured reverse proxy * **RPC API** (enable/disable from web interface) * Remote reset the board * **Over-The-Air** (OTA) updates even for 1Mb boards * Manually from PlatformIO or Arduino IDE * Automatic updates through the [NoFUSS Library](https://bitbucket.org/xoseperez/nofuss) * Update from web interface using pre-built images * **Command line configuration** * Change configuration * Run special commands * **Telnet support** * Enable/disable via the web UI * Show debug info and allows to run terminal commands * **Unstable system check** * Detects unstable system (crashes on boot continuously) and defaults to a stable system * Only WiFi AP, OTA and Telnet available if system is flagged as unstable * Button interface * Click to toggle relays * Double click to enter AP mode (only main button) * Long click (>1 second) to reboot device (only main button) * Extra long click (>10 seconds) to go back to factory settings (only main button) ## Documentation For more information please refer to the [ESPurna Wiki](https://bitbucket.org/xoseperez/espurna/wiki/Home). ## Supported hardware Here is the list of supported hardware. For more information please refer to the [ESPurna Wiki Hardware page](https://bitbucket.org/xoseperez/espurna/wiki/Hardware). |||| |---|---|---| |![Tinkerman Espurna H](images/devices/tinkerman-espurna-h.jpg)|![IteadStudio Sonoff RF Bridge](images/devices/itead-sonoff-rfbridge.jpg)|| |**Tinkerman ESPurna H**|**IteadStudio Sonoff RF Bridge**|| |![IteadStudio Sonoff Basic](images/devices/itead-sonoff-basic.jpg)|![IteadStudio Sonoff RF](images/devices/itead-sonoff-rf.jpg)|![Electrodragon WiFi IOT](images/devices/electrodragon-wifi-iot.jpg)| |**IteadStudio Sonoff Basic**|**IteadStudio Sonoff RF**|**Electrodragon WiFi IOT**| |![IteadStudio Sonoff Dual](images/devices/itead-sonoff-dual.jpg)|![IteadStudio Sonoff POW](images/devices/itead-sonoff-pow.jpg)|![IteadStudio Sonoff TH10/TH16](images/devices/itead-sonoff-th.jpg)| |**IteadStudio Sonoff Dual**|**IteadStudio Sonoff POW**|**IteadStudio Sonoff TH10/TH16**| |![IteadStudio Sonoff 4CH](images/devices/itead-sonoff-4ch.jpg)|![IteadStudio Sonoff 4CH Pro](images/devices/itead-sonoff-4ch-pro.jpg)|![OpenEnergyMonitor WiFi MQTT Relay / Thermostat](images/devices/openenergymonitor-mqtt-relay.jpg)| |**IteadStudio Sonoff 4CH**|**IteadStudio Sonoff 4CH Pro**|**OpenEnergyMonitor WiFi MQTT Relay / Thermostat**| |![IteadStudio S20](images/devices/itead-s20.jpg)|![WorkChoice EcoPlug](images/devices/workchoice-ecoplug.jpg)|![Power meters based on V9261F and ECH1560](images/devices/generic-v9261f.jpg)| |**IteadStudio S20**|**WorkChoice EcoPlug**|**Power meters based on V9261F and ECH1560**| |![IteadStudio Sonoff Touch](images/devices/itead-sonoff-touch.jpg)|![IteadStudio Sonoff T1](images/devices/itead-sonoff-t1.jpg)|| |**IteadStudio Sonoff Touch**|**IteadStudio Sonoff T1**|| |![IteadStudio Slampher](images/devices/itead-slampher.jpg)|![AI-Thinker Wifi Light / Noduino OpenLight](images/devices/aithinker-ai-light.jpg)|![Itead Sonoff B1](images/devices/itead-sonoff-b1.jpg)| |**IteadStudio Slampher**|**AI-Thinker Wifi Light / Noduino OpenLight**|**IteadStudio Sonoff B1**| |![MagicHome LED Controller (1.0 and 2.0)](images/devices/magichome-led-controller.jpg)|![Huacanxing H801](images/devices/huacanxing-h801.jpg)|![Itead BN-SZ01](images/devices/itead-bn-sz01.jpg)| |**MagicHome LED Controller (1.0 and 2.0)**|**Huacanxing H801**|**Itead BN-SZ01**| |![IteadStudio Sonoff SV](images/devices/itead-sonoff-sv.jpg)|![IteadStudio 1CH Inching](images/devices/itead-1ch-inching.jpg)|![IteadStudio Motor Clockwise/Anticlockwise](images/devices/itead-motor.jpg)| |**IteadStudio Sonoff SV**|**IteadStudio 1CH Inching**|**IteadStudio Motor Clockwise/Anticlockwise**| |![Wemos D1 Mini Relay Shield](images/devices/wemos-d1-mini-relayshield.jpg)|![Jan Goedeke Wifi Relay (NO/NC)](images/devices/jangoe-wifi-relay.png)|![Jorge García Wifi + Relays Board Kit](images/devices/jorgegarcia-wifi-relays.jpg)| |**Wemos D1 Mini Relay Shield**|**Jan Goedeke Wifi Relay (NO/NC)**|**Jorge García Wifi + Relays Board Kit**| |![EXS Wifi Relay v3.1](images/devices/exs-wifi-relay-v31.jpg)||| |**EXS Wifi Relay v3.1**||| Other supported boards: Itead Sonoff LED, Huacanxing H802, WiOn 50055, ManCaveMade ESP-Live, InterMitTech QuinLED 2.6, Arilux AL-LC06, Xenon SM-PW702U, Authometion LYT8266. ## License Copyright (C) 2016-2017 by Xose Pérez (@xoseperez) This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see .