/* MIGRATE MODULE Copyright (C) 2016-2018 by Xose Pérez */ void _cmpMoveIndexDown(const char * key, int offset = 0) { if (hasSetting(key, 0)) return; for (unsigned char index = 1; index < SETTINGS_MAX_LIST_COUNT; index++) { if (hasSetting(key, index)) { setSetting(key, index - 1, getSetting(key, index).toInt() + offset); } else { delSetting(key, index - 1); } } } // Configuration versions // // 1: based on Embedis, no board definitions // 2: based on Embedis, with board definitions 1-based // 3: based on Embedis, with board definitions 0-based void migrate() { // Get config version unsigned int board = getSetting("board", 0).toInt(); unsigned int config_version = getSetting("cfg", board > 0 ? 2 : 1).toInt(); // Update if not on latest version if (config_version == CFG_VERSION) return; setSetting("cfg", CFG_VERSION); if (config_version == 2) { _cmpMoveIndexDown("ledGPIO"); _cmpMoveIndexDown("ledLogic"); _cmpMoveIndexDown("btnGPIO"); _cmpMoveIndexDown("btnRelay", -1); _cmpMoveIndexDown("relayGPIO"); _cmpMoveIndexDown("relayType"); } if (config_version == 1) { #if defined(NODEMCU_LOLIN) setSetting("board", 2); setSetting("ledGPIO", 0, 2); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(WEMOS_D1_MINI_RELAYSHIELD) setSetting("board", 3); setSetting("ledGPIO", 0, 2); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 5); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_BASIC) setSetting("board", 4); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_TH) setSetting("board", 5); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_SV) setSetting("board", 6); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_TOUCH) setSetting("board", 7); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_POW) setSetting("board", 8); setSetting("ledGPIO", 0, 15); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("selGPIO", 5); setSetting("cf1GPIO", 13); setSetting("cfGPIO", 14); #elif defined(ITEAD_SONOFF_DUAL) setSetting("board", 9); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnRelay", 0, 0xFF); setSetting("btnRelay", 1, 0xFF); setSetting("btnRelay", 2, 0); setSetting("relayProvider", RELAY_PROVIDER_DUAL); setSetting("relays", 2); #elif defined(ITEAD_1CH_INCHING) setSetting("board", 10); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_4CH) setSetting("board", 11); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnGPIO", 1, 9); setSetting("btnGPIO", 2, 10); setSetting("btnGPIO", 3, 14); setSetting("btnRelay", 0, 0); setSetting("btnRelay", 1, 1); setSetting("btnRelay", 2, 2); setSetting("btnRelay", 3, 3); setSetting("relayGPIO", 0, 12); setSetting("relayGPIO", 1, 5); setSetting("relayGPIO", 2, 4); setSetting("relayGPIO", 3, 15); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); setSetting("relayType", 2, RELAY_TYPE_NORMAL); setSetting("relayType", 3, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SLAMPHER) setSetting("board", 12); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(ITEAD_S20) setSetting("board", 13); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(ELECTRODRAGON_WIFI_IOT) setSetting("board", 14); setSetting("ledGPIO", 0, 16); setSetting("ledLogic", 0, 0); setSetting("btnGPIO", 0, 0); setSetting("btnGPIO", 1, 2); setSetting("btnRelay", 0, 0); setSetting("btnRelay", 1, 1); setSetting("relayGPIO", 0, 12); setSetting("relayGPIO", 1, 13); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); #elif defined(WORKCHOICE_ECOPLUG) setSetting("board", 15); setSetting("ledGPIO", 0, 2); setSetting("ledLogic", 0, 0); setSetting("btnGPIO", 0, 13); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 15); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(JANGOE_WIFI_RELAY_NC) setSetting("board", 16); setSetting("btnGPIO", 0, 12); setSetting("btnGPIO", 1, 13); setSetting("btnRelay", 0, 0); setSetting("btnRelay", 1, 1); setSetting("relayGPIO", 0, 2); setSetting("relayGPIO", 1, 14); setSetting("relayType", 0, RELAY_TYPE_INVERSE); setSetting("relayType", 1, RELAY_TYPE_INVERSE); #elif defined(JANGOE_WIFI_RELAY_NO) setSetting("board", 17); setSetting("btnGPIO", 0, 12); setSetting("btnGPIO", 1, 13); setSetting("btnRelay", 0, 0); setSetting("btnRelay", 1, 1); setSetting("relayGPIO", 0, 2); setSetting("relayGPIO", 1, 14); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); #elif defined(OPENENERGYMONITOR_MQTT_RELAY) setSetting("board", 18); setSetting("ledGPIO", 0, 16); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(JORGEGARCIA_WIFI_RELAYS) setSetting("board", 19); setSetting("relayGPIO", 0, 0); setSetting("relayGPIO", 1, 2); setSetting("relayType", 0, RELAY_TYPE_INVERSE); setSetting("relayType", 1, RELAY_TYPE_INVERSE); #elif defined(AITHINKER_AI_LIGHT) setSetting("board", 20); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_MY92XX); setSetting("myModel", MY92XX_MODEL_MY9291); setSetting("myChips", 1); setSetting("myDIGPIO", 13); setSetting("myDCKIGPIO", 15); setSetting("relays", 1); #elif defined(MAGICHOME_LED_CONTROLLER) setSetting("board", 21); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("ledGPIO", 0, 2); setSetting("ledLogic", 0, 1); setSetting("chGPIO", 0, 14); setSetting("chGPIO", 1, 5); setSetting("chGPIO", 2, 12); setSetting("chGPIO", 3, 13); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("chLogic", 2, 0); setSetting("chLogic", 3, 0); setSetting("relays", 1); #elif defined(MAGICHOME_LED_CONTROLLER_IR) setSetting("board", 21); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("ledGPIO", 0, 2); setSetting("ledLogic", 0, 1); setSetting("chGPIO", 0, 5); setSetting("chGPIO", 1, 12); setSetting("chGPIO", 2, 13); setSetting("chGPIO", 3, 14); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("chLogic", 2, 0); setSetting("chLogic", 3, 0); setSetting("relays", 1); #elif defined(ITEAD_MOTOR) setSetting("board", 22); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(TINKERMAN_ESPURNA_H06) setSetting("board", 23); setSetting("ledGPIO", 0, 5); setSetting("ledLogic", 0, 0); setSetting("btnGPIO", 0, 4); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_INVERSE); setSetting("selGPIO", 2); setSetting("cf1GPIO", 13); setSetting("cfGPIO", 14); #elif defined(HUACANXING_H801) setSetting("board", 24); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("ledGPIO", 0, 5); setSetting("ledLogic", 0, 1); setSetting("chGPIO", 0, 15); setSetting("chGPIO", 1, 13); setSetting("chGPIO", 2, 12); setSetting("chGPIO", 3, 14); setSetting("chGPIO", 4, 4); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("chLogic", 2, 0); setSetting("chLogic", 3, 0); setSetting("chLogic", 4, 0); setSetting("relays", 1); #elif defined(ITEAD_BNSZ01) setSetting("board", 25); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("chGPIO", 0, 12); setSetting("chLogic", 0, 0); setSetting("relays", 1); #elif defined(ITEAD_SONOFF_RFBRIDGE) setSetting("board", 26); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("relayProvider", RELAY_PROVIDER_RFBRIDGE); setSetting("relays", 6); #elif defined(ITEAD_SONOFF_4CH_PRO) setSetting("board", 27); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnGPIO", 1, 9); setSetting("btnGPIO", 2, 10); setSetting("btnGPIO", 3, 14); setSetting("btnRelay", 0, 0); setSetting("btnRelay", 1, 1); setSetting("btnRelay", 2, 2); setSetting("btnRelay", 3, 3); setSetting("relayGPIO", 0, 12); setSetting("relayGPIO", 1, 5); setSetting("relayGPIO", 2, 4); setSetting("relayGPIO", 3, 15); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); setSetting("relayType", 2, RELAY_TYPE_NORMAL); setSetting("relayType", 3, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_B1) setSetting("board", 28); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_MY92XX); setSetting("myModel", MY92XX_MODEL_MY9231); setSetting("myChips", 2); setSetting("myDIGPIO", 12); setSetting("myDCKIGPIO", 14); setSetting("relays", 1); #elif defined(ITEAD_SONOFF_LED) setSetting("board", 29); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("chGPIO", 0, 12); setSetting("chLogic", 0, 0); setSetting("chGPIO", 1, 14); setSetting("chLogic", 1, 0); setSetting("relays", 1); #elif defined(ITEAD_SONOFF_T1_1CH) setSetting("board", 30); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 9); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 5); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_T1_2CH) setSetting("board", 31); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnGPIO", 1, 10); setSetting("btnRelay", 0, 0); setSetting("btnRelay", 1, 1); setSetting("relayGPIO", 0, 12); setSetting("relayGPIO", 1, 4); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_T1_3CH) setSetting("board", 32); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnGPIO", 1, 9); setSetting("btnGPIO", 2, 10); setSetting("btnRelay", 0, 0); setSetting("btnRelay", 1, 1); setSetting("btnRelay", 2, 2); setSetting("relayGPIO", 0, 12); setSetting("relayGPIO", 1, 5); setSetting("relayGPIO", 2, 4); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); setSetting("relayType", 2, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_RF) setSetting("board", 33); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(WION_50055) setSetting("board", 34); setSetting("ledGPIO", 0, 2); setSetting("ledLogic", 0, 0); setSetting("btnGPIO", 0, 13); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 15); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(EXS_WIFI_RELAY_V31) setSetting("board", 35); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 13); setSetting("relayResetGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(HUACANXING_H802) setSetting("board", 36); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("chGPIO", 0, 12); setSetting("chGPIO", 1, 14); setSetting("chGPIO", 2, 13); setSetting("chGPIO", 3, 15); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("chLogic", 2, 0); setSetting("chLogic", 3, 0); setSetting("relays", 1); #elif defined(GENERIC_V9261F) setSetting("board", 37); #elif defined(GENERIC_ECH1560) setSetting("board", 38); #elif defined(TINKERMAN_ESPURNA_H08) setSetting("board", 39); setSetting("ledGPIO", 0, 2); setSetting("ledLogic", 0, 0); setSetting("btnGPIO", 0, 4); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("selGPIO", 5); setSetting("cf1GPIO", 13); setSetting("cfGPIO", 14); #elif defined(MANCAVEMADE_ESPLIVE) setSetting("board", 40); setSetting("btnGPIO", 0, 4); setSetting("btnGPIO", 1, 5); setSetting("btnRelay", 0, 0); setSetting("btnRelay", 1, 1); setSetting("relayGPIO", 0, 12); setSetting("relayGPIO", 1, 13); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); #elif defined(INTERMITTECH_QUINLED) setSetting("board", 41); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("ledGPIO", 0, 1); setSetting("ledLogic", 0, 1); setSetting("chGPIO", 0, 0); setSetting("chGPIO", 1, 2); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("relays", 1); #elif defined(MAGICHOME_LED_CONTROLLER_20) setSetting("board", 42); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("chGPIO", 0, 5); setSetting("chGPIO", 1, 12); setSetting("chGPIO", 2, 13); setSetting("chGPIO", 3, 15); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("chLogic", 2, 0); setSetting("chLogic", 3, 0); setSetting("relays", 1); #elif defined(ARILUX_AL_LC06) setSetting("board", 43); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("chGPIO", 0, 12); setSetting("chGPIO", 1, 14); setSetting("chGPIO", 2, 13); setSetting("chGPIO", 3, 15); setSetting("chGPIO", 4, 5); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("chLogic", 2, 0); setSetting("chLogic", 3, 0); setSetting("chLogic", 4, 0); setSetting("relays", 1); #elif defined(XENON_SM_PW702U) setSetting("board", 44); setSetting("ledGPIO", 0, 4); setSetting("ledLogic", 0, 0); setSetting("btnGPIO", 0, 13); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(AUTHOMETION_LYT8266) setSetting("board", 45); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("chGPIO", 0, 13); setSetting("chGPIO", 1, 12); setSetting("chGPIO", 2, 14); setSetting("chGPIO", 3, 2); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("chLogic", 2, 0); setSetting("chLogic", 3, 0); setSetting("relays", 1); setSetting("enGPIO", 15); #elif defined(ARILUX_E27) setSetting("board", 46); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_MY92XX); setSetting("myModel", MY92XX_MODEL_MY9291); setSetting("myChips", 1); setSetting("myDIGPIO", 13); setSetting("myDCKIGPIO", 15); setSetting("relays", 1); #elif defined(YJZK_SWITCH_2CH) setSetting("board", 47); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 0); setSetting("ledWifi", 0); setSetting("btnGPIO", 0, 0); setSetting("btnGPIO", 1, 9); setSetting("btnRelay", 0, 0); setSetting("btnRelay", 1, 1); setSetting("relayGPIO", 0, 12); setSetting("relayGPIO", 1, 5); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_DUAL_R2) setSetting("board", 48); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnGPIO", 1, 9); setSetting("btnGPIO", 2, 10); setSetting("btnRelay", 0, 0); setSetting("btnRelay", 1, 1); setSetting("btnRelay", 2, 0); setSetting("relayGPIO", 0, 12); setSetting("relayGPIO", 1, 5); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); #elif defined(GENERIC_8CH) setSetting("board", 49); setSetting("relayGPIO", 0, 0); setSetting("relayGPIO", 1, 2); setSetting("relayGPIO", 2, 4); setSetting("relayGPIO", 3, 5); setSetting("relayGPIO", 4, 12); setSetting("relayGPIO", 5, 13); setSetting("relayGPIO", 6, 14); setSetting("relayGPIO", 7, 15); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); setSetting("relayType", 2, RELAY_TYPE_NORMAL); setSetting("relayType", 3, RELAY_TYPE_NORMAL); setSetting("relayType", 4, RELAY_TYPE_NORMAL); setSetting("relayType", 5, RELAY_TYPE_NORMAL); setSetting("relayType", 6, RELAY_TYPE_NORMAL); setSetting("relayType", 7, RELAY_TYPE_NORMAL); #elif defined(ARILUX_AL_LC01) setSetting("board", 50); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("chGPIO", 0, 5); setSetting("chGPIO", 1, 12); setSetting("chGPIO", 2, 13); setSetting("chGPIO", 3, 14); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("chLogic", 2, 0); setSetting("chLogic", 3, 0); setSetting("relays", 1); #elif defined(ARILUX_AL_LC11) setSetting("board", 51); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("chGPIO", 0, 5); setSetting("chGPIO", 1, 4); setSetting("chGPIO", 2, 14); setSetting("chGPIO", 3, 13); setSetting("chGPIO", 4, 12); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("chLogic", 2, 0); setSetting("chLogic", 3, 0); setSetting("chLogic", 4, 0); setSetting("relays", 1); #elif defined(ARILUX_AL_LC02) setSetting("board", 52); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("chGPIO", 0, 12); setSetting("chGPIO", 1, 5); setSetting("chGPIO", 2, 13); setSetting("chGPIO", 3, 15); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("chLogic", 2, 0); setSetting("chLogic", 3, 0); setSetting("relays", 1); #elif defined(KMC_70011) setSetting("board", 53); setSetting("ledGPIO", 0, 13); setSetting("ledLogic", 0, 0); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 14); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("selGPIO", 12); setSetting("cf1GPIO", 5); setSetting("cfGPIO", 4); #elif defined(GIZWITS_WITTY_CLOUD) setSetting("board", 54); setSetting("ledGPIO", 0, 2); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 4); setSetting("relayProvider", RELAY_PROVIDER_LIGHT); setSetting("lightProvider", LIGHT_PROVIDER_DIMMER); setSetting("chGPIO", 0, 15); setSetting("chGPIO", 1, 12); setSetting("chGPIO", 2, 13); setSetting("chLogic", 0, 0); setSetting("chLogic", 1, 0); setSetting("chLogic", 2, 0); setSetting("relays", 1); #elif defined(EUROMATE_WIFI_STECKER_SCHUKO) setSetting("board", 55); setSetting("ledGPIO", 0, 4); setSetting("ledLogic", 0, 0); setSetting("ledGPIO", 1, 12); setSetting("ledLogic", 1, 0); setSetting("btnGPIO", 0, 14); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 5); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(TONBUX_POWERSTRIP02) setSetting("board", 56); setSetting("relayGPIO", 0, 4); setSetting("relayGPIO", 1, 13); setSetting("relayGPIO", 2, 12); setSetting("relayGPIO", 3, 14); setSetting("relayGPIO", 4, 16); setSetting("relayType", 0, RELAY_TYPE_INVERSE); setSetting("relayType", 1, RELAY_TYPE_INVERSE); setSetting("relayType", 2, RELAY_TYPE_INVERSE); setSetting("relayType", 3, RELAY_TYPE_INVERSE); setSetting("relayType", 4, RELAY_TYPE_NORMAL); // Not a relay. USB ports on/off setSetting("ledGPIO", 0, 0); // 1 blue led setSetting("ledLogic", 0, 1); setSetting("ledGPIO", 1, 3); // 3 red leds setSetting("ledLogic", 1, 1); setSetting("btnGPIO", 0, 5); setSetting("btnRelay", 0, 1); #elif defined(LINGAN_SWA1) setSetting("board", 57); setSetting("ledGPIO", 0, 4); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 13); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 5); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(HEYGO_HY02) setSetting("board", 58); setSetting("ledGPIO", 0, 0); setSetting("ledLogic", 0, 1); setSetting("ledGPIO", 1, 15); setSetting("ledLogic", 1, 0); setSetting("btnGPIO", 0, 13); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 15); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("selGPIO", 3); setSetting("cf1GPIO", 14); setSetting("cfGPIO", 5); #elif defined(MAXCIO_WUS002S) setSetting("board", 59); setSetting("ledGPIO", 0, 3); setSetting("ledLogic", 0, 0); setSetting("btnGPIO", 0, 2); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 13); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("selGPIO", 12); setSetting("cf1GPIO", 5); setSetting("cfGPIO", 4); #elif defined(YIDIAN_XSSSA05) setSetting("board", 60); setSetting("ledGPIO", 0, 0); setSetting("ledLogic", 0, 0); setSetting("ledGPIO", 1, 5); setSetting("ledLogic", 1, 0); setSetting("ledGPIO", 2, 2); setSetting("ledLogic", 2, 0); setSetting("btnGPIO", 0, 13); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 15); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(TONBUX_XSSSA06) setSetting("board", 61); setSetting("ledGPIO", 0, 4); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 13); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 5); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(GREEN_ESP8266RELAY) setSetting("board", 62); setSetting("ledGPIO", 0, 2); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 5); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 4); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(IKE_ESPIKE) setSetting("board", 63); setSetting("ledGPIO", 0, 2); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 13); setSetting("btnRelay", 0, 0); setSetting("btnGPIO", 1, 12); setSetting("btnRelay", 1, 1); setSetting("btnGPIO", 2, 13); setSetting("btnRelay", 2, 2); setSetting("relayGPIO", 0, 4); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayGPIO", 1, 5); setSetting("relayType", 1, RELAY_TYPE_NORMAL); setSetting("relayGPIO", 2, 16); setSetting("relayType", 2, RELAY_TYPE_NORMAL); #elif defined(ARNIEX_SWIFITCH) setSetting("board", 64); setSetting("ledGPIO", 0, 12); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 4); setSetting("btnRelay", 0, 1); setSetting("relayGPIO", 0, 5); setSetting("relayType", 0, RELAY_TYPE_INVERSE); #elif defined(GENERIC_ESP01S_RELAY_V40) setSetting("board", 65); setSetting("ledGPIO", 0, 2); setSetting("ledLogic", 0, 0); setSetting("relayGPIO", 0, 0); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(GENERIC_ESP01S_RGBLED_V10) setSetting("board", 66); setSetting("ledGPIO", 0, 2); #elif defined(HELTEC_TOUCHRELAY) setSetting("board", 67); setSetting("btnGPIO", 0, 14); setSetting("btnRelay", 0, 1); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(GENERIC_ESP01S_DHT11_V10) setSetting("board", 68); #elif defined(GENERIC_ESP01S_DS18B20_V10) setSetting("board", 69); #elif defined(ZHILDE_EU44_W) setSetting("board", 70); setSetting("btnGPIO", 0, 3); setSetting("ledGPIO", 0, 1); setSetting("ledLogic", 0, 1); setSetting("relayGPIO", 0, 5); setSetting("relayGPIO", 1, 4); setSetting("relayGPIO", 2, 12); setSetting("relayGPIO", 3, 13); setSetting("relayGPIO", 4, 14); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); setSetting("relayType", 2, RELAY_TYPE_NORMAL); setSetting("relayType", 3, RELAY_TYPE_NORMAL); setSetting("relayType", 4, RELAY_TYPE_NORMAL); #elif defined(ITEAD_SONOFF_POW_R2) setSetting("board", 71); setSetting("ledGPIO", 0, 15); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("selGPIO", 5); setSetting("cf1GPIO", 13); setSetting("cfGPIO", 14); #elif defined(LUANI_HVIO) setSetting("board", 72); setSetting("ledGPIO", 0, 15); setSetting("ledLogic", 0, 0); setSetting("btnGPIO", 0, 12); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 4); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayGPIO", 1, 5); setSetting("relayType", 1, RELAY_TYPE_NORMAL); #elif defined(ALLNET_4DUINO_IOT_WLAN_RELAIS) setSetting("board", 73); setSetting("relayGPIO", 0, 14); setSetting("relayResetGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_LATCHED); #elif defined(TONBUX_MOSQUITO_KILLER) setSetting("board", 74); setSetting("ledGPIO", 0, 15); setSetting("ledLogic", 0, 1); setSetting("ledGPIO", 1, 14); setSetting("ledLogic", 1, 1); setSetting("ledGPIO", 2, 12); setSetting("ledLogic", 2, 0); setSetting("ledGPIO", 3, 16); setSetting("ledLogic", 3, 0); setSetting("btnGPIO", 0, 2); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 5); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(NEO_COOLCAM_POWER_PLUG_WIFI) setSetting("board", 75); setSetting("ledGPIO", 0, 4); setSetting("ledLogic", 0, 1); setSetting("btnGPIO", 0, 13); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 12); setSetting("relayType", 0, RELAY_TYPE_NORMAL); #elif defined(PILOTAK_ESP_DIN_V1) setSetting("board", 76); setSetting("ledGPIO", 0, 16); setSetting("ledLogic", 0, 0); setSetting("btnGPIO", 0, 0); setSetting("btnRelay", 0, 0); setSetting("relayGPIO", 0, 4); setSetting("relayGPIO", 1, 5); setSetting("relayType", 0, RELAY_TYPE_NORMAL); setSetting("relayType", 1, RELAY_TYPE_NORMAL); #else // Allow users to define new settings without migration config //#error "UNSUPPORTED HARDWARE!" #endif } saveSettings(); }