Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

418 lines
14 KiB

/*
IR MODULE
Copyright (C) 2018 by Alexander Kolesnikov (raw and MQTT implementation)
Copyright (C) 2017-2018 by François Déchery
Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
-----------------------------------------------------------------------------
Configuration
-----------------------------------------------------------------------------
To enable transmit functions define IR_TX_PIN
To enable receiver functions define IR_RX_PIN
MQTT input topic: {root}/irin
MQTT output topic: {root}/irout/set
--------------------------------------------------------------------------------
MQTT messages
--------------------------------------------------------------------------------
Decoded messages:
Transmitting:
Payload: 2:121944:32:1 (<type>:<code>:<bits>[:<repeat>])
The repeat value is optional and defaults to 1
Receiving:
Payload: 2:121944:32 (<type>:<code>:<bits>)
Raw messages:
Transmitting:
Payload: 1000,1000,1000,1000,1000,DELAY,COUNT,FREQ:500,500,500,500,500
| IR codes | | IR repeat codes |
codes - time in microseconds when IR LED On/Off. First value - ON, second - Off ...
DELAY - delay in milliseconds between sending repeats
COUNT - how many repeats send. Max 120.
FREQ - modulation frequency. Usually 38kHz. You may set 38, it means 38kHz or set 38000, it meant same.
Repeat codes is optional. You may omit ":" and codes. In this case if repeat count > 0 we repeat main code.
Receiving:
Payload: 1000,1000,1000,1000,1000
| IR codes |
--------------------------------------------------------------------------------
*/
#if IR_SUPPORT
#include <IRremoteESP8266.h>
#if defined(IR_RX_PIN)
#include <IRrecv.h>
IRrecv _ir_receiver(IR_RX_PIN, IR_BUFFER_SIZE, IR_TIMEOUT, true);
decode_results _ir_results;
#endif // defined(IR_RX_PIN)
#if defined(IR_TX_PIN)
#include <IRsend.h>
IRsend _ir_sender(IR_TX_PIN);
#if IR_USE_RAW
uint16_t _ir_freq = 38; // IR modulation freq. for sending codes and repeat codes
uint8_t _ir_repeat_size = 0; // size of repeat array
uint16_t * _ir_raw; // array for sending codes and repeat codes
#else
uint8_t _ir_type = 0; // Type of encoding
uint64_t _ir_code = 0; // Code to transmit
uint16_t _ir_bits = 0; // Code bits
#endif
uint8_t _ir_repeat = 0; // count of times repeating of repeat_code
uint32_t _ir_delay = IR_DELAY; // delay between repeat codes
#endif // defined(IR_TX_PIN)
// MQTT to IR
#if MQTT_SUPPORT && defined(IR_TX_PIN)
void _irMqttCallback(unsigned int type, const char * topic, const char * payload) {
if (type == MQTT_CONNECT_EVENT) {
mqttSubscribe(MQTT_TOPIC_IROUT);
}
if (type == MQTT_MESSAGE_EVENT) {
String t = mqttMagnitude((char *) topic);
// Match topic
if (t.equals(MQTT_TOPIC_IROUT)) {
String data = String(payload);
unsigned int len = data.length();
int col = data.indexOf(":"); // position of ":" which means repeat_code
#if IR_USE_RAW
unsigned char count = 1; // count of code values for allocating array
if (col > 2) { // count & validating repeat code
_ir_repeat_size = 1;
// count & validate repeat-string
for(unsigned int i = col+1; i < len; i++) {
if (i < len-1) {
if ( payload[i] == ',' && isDigit(payload[i+1]) && i>0 ) { //validate string
_ir_repeat_size++;
} else if (!isDigit(payload[i])) {
// Error in repeat_code. Use comma separated unsigned integer values.
// Last three is repeat delay, repeat count(<120) and frequency.
// After all you may write ':' and specify repeat code followed by comma.
DEBUG_MSG_P(PSTR("[IR] Error in repeat code.\n"));
return;
}
}
}
len = col; //cut repeat code from main code processing
} // end of counting & validating repeat code
// count & validate main code string
for(unsigned int i = 0; i < len; i++) {
if (i<len-1) {
if ( payload[i] == ',' && isDigit(payload[i+1]) && i>0 ) { //validate string
count++;
} else if (!isDigit(payload[i])) {
// Error in main code. Use comma separated unsigned integer values.
// Last three is repeat delay, repeat count(<120) and frequency.
// After all you may write ':' and specify repeat code followed by comma.
DEBUG_MSG_P(PSTR("[IR] Error in main code.\n"));
return;
}
}
}
_ir_raw = (uint16_t*)calloc(count, sizeof(uint16_t)); // allocating array for main codes
String value = ""; // for populating values of array from comma separated string
int j = 0; // for populating values of array from comma separated string
// populating main code array from part of MQTT string
for (unsigned int i = 0; i < len; i++) {
if (payload[i] != ',') {
value = value + data[i];
}
if ((payload[i] == ',') || (i == len - 1)) {
_ir_raw[j]= value.toInt();
value = "";
j++;
}
}
// if count>3 then we have values, repeat delay, count and modulation frequency
_ir_repeat=0;
if (count>3) {
if (_ir_raw[count-2] <= 120) { // if repeat count > 120 it's to long and ussualy unusual. maybe we get raw code without this parameters and just use defaults for freq.
_ir_freq = _ir_raw[count-1];
_ir_repeat = _ir_raw[count-2];
_ir_delay = _ir_raw[count-3];
count = count - 3;
}
}
DEBUG_MSG_P(PSTR("[IR] Raw IR output %d codes, repeat %d times on %d(k)Hz freq.\n"), count, _ir_repeat, _ir_freq);
#if defined(IR_RX_PIN)
_ir_receiver.disableIRIn();
#endif
_ir_sender.sendRaw(_ir_raw, count, _ir_freq);
if (_ir_repeat==0) { // no repeat, cleaning array, enabling receiver
free(_ir_raw);
#if defined(IR_RX_PIN)
_ir_receiver.enableIRIn();
#endif
} else if (col>2) { // repeat with repeat_code
DEBUG_MSG_P(PSTR("[IR] Repeat codes count: %d\n"), _ir_repeat_size);
free(_ir_raw);
_ir_raw = (uint16_t*)calloc(_ir_repeat_size, sizeof(uint16_t));
String value = ""; // for populating values of array from comma separated string
int j = 0; // for populating values of array from comma separated string
len = data.length(); //redifining length to full lenght
// populating repeat code array from part of MQTT string
for (unsigned int i = col+1; i < len; i++) {
value = value + data[i];
if ((payload[i] == ',') || (i == len - 1)) {
_ir_raw[j]= value.toInt();
value = "";
j++;
}
}
} else { // if repeat code not specified (col<=2) repeat with current main code
_ir_repeat_size = count;
}
#else
_ir_repeat = 0;
if (col > 0) {
_ir_type = data.toInt();
_ir_code = strtoul(data.substring(col+1).c_str(), NULL, 10);
col = data.indexOf(":", col+1);
if (col > 0) {
_ir_bits = data.substring(col+1).toInt();
col = data.indexOf(":", col+1);
if (col > 2) {
_ir_repeat = data.substring(col+1).toInt();
} else {
_ir_repeat = IR_REPEAT;
}
}
}
if (_ir_repeat > 0) {
DEBUG_MSG_P(PSTR("[IR] IROUT: %d:%lu:%d:%d\n"), _ir_type, (unsigned long) _ir_code, _ir_bits, _ir_repeat);
} else {
DEBUG_MSG_P(PSTR("[IR] Wrong MQTT payload format (%s)\n"), payload);
}
#endif // IR_USE_RAW
} // end of match topic
} // end of MQTT message
} //end of function
void _irTXLoop() {
static uint32_t last = 0;
if ((_ir_repeat > 0) && (millis() - last > _ir_delay)) {
last = millis();
// Send message
#if IR_USE_RAW
_ir_sender.sendRaw(_ir_raw, _ir_repeat_size, _ir_freq);
#else
_ir_sender.send(_ir_type, _ir_code, _ir_bits);
#endif
// Update repeat count
--_ir_repeat;
if (0 == _ir_repeat) {
#if IR_USE_RAW
free(_ir_raw);
#endif
#if defined(IR_RX_PIN)
_ir_receiver.enableIRIn();
#endif
}
}
}
#endif // MQTT_SUPPORT && defined(IR_TX_PIN)
// Receiving
#if defined(IR_RX_PIN)
void _irProcess(unsigned char type, unsigned long code) {
#if IR_BUTTON_SET > 0
boolean found = false;
for (unsigned char i = 0; i < IR_BUTTON_COUNT ; i++) {
uint32_t button_code = pgm_read_dword(&IR_BUTTON[i][0]);
if (code == button_code) {
unsigned long button_mode = pgm_read_dword(&IR_BUTTON[i][1]);
unsigned long button_value = pgm_read_dword(&IR_BUTTON[i][2]);
if (button_mode == IR_BUTTON_MODE_STATE) {
relayStatus(0, button_value);
}
if (button_mode == IR_BUTTON_MODE_TOGGLE) {
relayToggle(button_value);
}
#if LIGHT_PROVIDER != LIGHT_PROVIDER_NONE
if (button_mode == IR_BUTTON_MODE_BRIGHTER) {
lightBrightnessStep(button_value ? 1 : -1);
nice_delay(150); //debounce
}
if (button_mode == IR_BUTTON_MODE_RGB) {
lightColor(button_value);
}
/*
#if LIGHT_PROVIDER == LIGHT_PROVIDER_FASTLED
if (button_mode == IR_BUTTON_MODE_EFFECT) {
_buttonAnimMode(button_value);
}
#endif
*/
/*
if (button_mode == IR_BUTTON_MODE_HSV) {
lightColor(button_value);
}
*/
lightUpdate(true, true);
#endif
found = true;
break;
}
}
if (!found) {
DEBUG_MSG_P(PSTR("[IR] Code does not match any action\n"));
}
#endif
}
void _irRXLoop() {
if (_ir_receiver.decode(&_ir_results)) {
_ir_receiver.resume(); // Receive the next value
// Debounce
static unsigned long last_time = 0;
if (millis() - last_time < IR_DEBOUNCE) return;
last_time = millis();
#if IR_USE_RAW
// Check code
if (_ir_results.rawlen < 1) return;
char * payload;
String value = "";
for (int i = 1; i < _ir_results.rawlen; i++) {
if (i>1) value = value + ",";
value = value + String(_ir_results.rawbuf[i] * RAWTICK);
}
payload = const_cast<char*>(value.c_str());
#else
// Check code
if (_ir_results.value < 1) return;
if (_ir_results.decode_type < 1) return;
if (_ir_results.bits < 1) return;
char payload[32];
snprintf_P(payload, sizeof(payload), PSTR("%u:%lu:%u"), _ir_results.decode_type, (unsigned long) _ir_results.value, _ir_results.bits);
#endif
DEBUG_MSG_P(PSTR("[IR] IRIN: %s\n"), payload);
#if not IR_USE_RAW
_irProcess(_ir_results.decode_type, (unsigned long) _ir_results.value);
#endif
#if MQTT_SUPPORT
if (strlen(payload)>0) {
mqttSend(MQTT_TOPIC_IRIN, (const char *) payload);
}
#endif
}
}
#endif // defined(IR_RX_PIN)
// -----------------------------------------------------------------------------
void _irLoop() {
#if defined(IR_RX_PIN)
_irRXLoop();
#endif
#if MQTT_SUPPORT && defined(IR_TX_PIN)
_irTXLoop();
#endif
}
void irSetup() {
#if defined(IR_RX_PIN)
_ir_receiver.enableIRIn();
DEBUG_MSG_P(PSTR("[IR] Receiver initialized \n"));
#endif
#if MQTT_SUPPORT && defined(IR_TX_PIN)
_ir_sender.begin();
mqttRegister(_irMqttCallback);
DEBUG_MSG_P(PSTR("[IR] Transmitter initialized \n"));
#endif
espurnaRegisterLoop(_irLoop);
}
#endif // IR_SUPPORT