Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

329 lines
11 KiB

//------------------------------------------------------------------------------
// GENERAL
//------------------------------------------------------------------------------
#define SERIAL_BAUDRATE 115200
#define HOSTNAME DEVICE
#define BUFFER_SIZE 1024
#define HEARTBEAT_INTERVAL 300000
#define UPTIME_OVERFLOW 4294967295
//--------------------------------------------------------------------------------
// DEBUG
//--------------------------------------------------------------------------------
#ifndef DEBUG_PORT
#define DEBUG_PORT Serial
#endif
// Uncomment and configure these lines to enable remote debug via udpDebug
// To receive the message son the destination computer use nc:
// nc -ul 8111
//#define DEBUG_UDP_IP IPAddress(192, 168, 1, 100)
//#define DEBUG_UDP_PORT 8111
//--------------------------------------------------------------------------------
// EEPROM
//--------------------------------------------------------------------------------
#define EEPROM_RELAY_STATUS 0
#define EEPROM_ENERGY_COUNT 1
#define EEPROM_CUSTOM_RESET 5
#define EEPROM_DATA_END 6
//--------------------------------------------------------------------------------
// RESET
//--------------------------------------------------------------------------------
#define CUSTOM_RESET_HARDWARE 1
#define CUSTOM_RESET_WEB 2
#define CUSTOM_RESET_TERMINAL 3
#define CUSTOM_RESET_MQTT 4
#define CUSTOM_RESET_RPC 5
#define CUSTOM_RESET_OTA 6
#define CUSTOM_RESET_NOFUSS 8
#define CUSTOM_RESET_UPGRADE 9
#define CUSTOM_RESET_FACTORY 10
#define CUSTOM_RESET_MAX 10
#include <pgmspace.h>
PROGMEM const char custom_reset_hardware[] = "Hardware button";
PROGMEM const char custom_reset_web[] = "Reset from web interface";
PROGMEM const char custom_reset_terminal[] = "Reset from terminal";
PROGMEM const char custom_reset_mqtt[] = "Reset from MQTT";
PROGMEM const char custom_reset_rpc[] = "Reset from RPC";
PROGMEM const char custom_reset_ota[] = "Reset after successful OTA update";
PROGMEM const char custom_reset_nofuss[] = "Reset after successful NoFUSS update";
PROGMEM const char custom_reset_upgrade[] = "Reset after successful web update";
PROGMEM const char custom_reset_factory[] = "Factory reset";
PROGMEM const char* const custom_reset_string[] = {
custom_reset_hardware, custom_reset_web, custom_reset_terminal,
custom_reset_mqtt, custom_reset_rpc, custom_reset_ota,
custom_reset_nofuss, custom_reset_upgrade, custom_reset_factory
};
//--------------------------------------------------------------------------------
// BUTTON
//--------------------------------------------------------------------------------
#define BUTTON_LNGCLICK_LENGTH 1000
#define BUTTON_LNGLNGCLICK_LENGTH 10000
#define BUTTON_EVENT_NONE 0
#define BUTTON_EVENT_PRESSED 1
#define BUTTON_EVENT_CLICK 2
#define BUTTON_EVENT_DBLCLICK 3
#define BUTTON_EVENT_LNGCLICK 4
#define BUTTON_EVENT_LNGLNGCLICK 5
#define BUTTON_MODE_NONE 0
#define BUTTON_MODE_TOGGLE 1
#define BUTTON_MODE_AP 2
#define BUTTON_MODE_RESET 3
#define BUTTON_MODE_PULSE 4
#define BUTTON_MODE_FACTORY 5
#define BUTTON_DEFAULT_MODE BUTTON_MODE_TOGGLE
//--------------------------------------------------------------------------------
// RELAY
//--------------------------------------------------------------------------------
#define RELAY_MODE_OFF 0
#define RELAY_MODE_ON 1
#define RELAY_MODE_SAME 2
#define RELAY_MODE_TOOGLE 3
#define RELAY_SYNC_ANY 0
#define RELAY_SYNC_NONE_OR_ONE 1
#define RELAY_SYNC_ONE 2
#define RELAY_SYNC_SAME 3
#define RELAY_PULSE_NONE 0
#define RELAY_PULSE_OFF 1
#define RELAY_PULSE_ON 2
#define RELAY_PROVIDER_RELAY 0
#define RELAY_PROVIDER_DUAL 1
#define RELAY_PROVIDER_LIGHT 2
// Pulse time in milliseconds
#define RELAY_PULSE_TIME 1.0
// 0 means OFF, 1 ON and 2 whatever was before
#define RELAY_MODE RELAY_MODE_OFF
// 0 means ANY, 1 zero or one and 2 one and only one
#define RELAY_SYNC RELAY_SYNC_ANY
// 0 means no pulses, 1 means normally off, 2 normally on
#define RELAY_PULSE_MODE RELAY_PULSE_NONE
// Relay requests flood protection window - in seconds
#define RELAY_FLOOD_WINDOW 3
// Allowed actual relay changes inside requests flood protection window
#define RELAY_FLOOD_CHANGES 5
//--------------------------------------------------------------------------------
// I18N
//--------------------------------------------------------------------------------
#define TMP_CELSIUS 0
#define TMP_FAHRENHEIT 1
#define TMP_UNITS TMP_CELSIUS
//--------------------------------------------------------------------------------
// LED
//--------------------------------------------------------------------------------
// All defined LEDs in the board can be managed through MQTT
// except the first one when LED_AUTO is set to 1.
// If LED_AUTO is set to 1 the board will use first defined LED to show wifi status.
#define LED_AUTO 1
// -----------------------------------------------------------------------------
// WIFI & WEB
// -----------------------------------------------------------------------------
#define WIFI_RECONNECT_INTERVAL 120000
#define WIFI_MAX_NETWORKS 5
#define ADMIN_PASS "fibonacci"
#define FORCE_CHANGE_PASS 1
#define HTTP_USERNAME "admin"
#define WS_BUFFER_SIZE 5
#define WS_TIMEOUT 1800000
#define WEBSERVER_PORT 80
#define DNS_PORT 53
#define ENABLE_MDNS 1
#define WEB_MODE_NORMAL 0
#define WEB_MODE_PASSWORD 1
#define AP_MODE AP_MODE_ALONE
// This option builds the firmware with the web interface embedded.
// You first have to build the data.h file that holds the contents
// of the web interface by running "gulp buildfs_embed"
#ifndef EMBEDDED_WEB
#define EMBEDDED_WEB 1
#endif
// -----------------------------------------------------------------------------
// OTA & NOFUSS
// -----------------------------------------------------------------------------
#define OTA_PORT 8266
#define NOFUSS_SERVER ""
#define NOFUSS_INTERVAL 3600000
// -----------------------------------------------------------------------------
// MQTT
// -----------------------------------------------------------------------------
#ifndef MQTT_USE_ASYNC
#define MQTT_USE_ASYNC 1
#endif
#define MQTT_SERVER ""
#define MQTT_PORT 1883
#define MQTT_TOPIC "/test/switch/{identifier}"
#define MQTT_RETAIN true
#define MQTT_QOS 0
#define MQTT_KEEPALIVE 30
#define MQTT_RECONNECT_DELAY 10000
#define MQTT_TRY_INTERVAL 30000
#define MQTT_MAX_TRIES 12
#define MQTT_SKIP_RETAINED 1
#define MQTT_SKIP_TIME 1000
#define MQTT_TOPIC_ACTION "action"
#define MQTT_TOPIC_RELAY "relay"
#define MQTT_TOPIC_LED "led"
#define MQTT_TOPIC_COLOR "color"
#define MQTT_TOPIC_BUTTON "button"
#define MQTT_TOPIC_IP "ip"
#define MQTT_TOPIC_VERSION "version"
#define MQTT_TOPIC_UPTIME "uptime"
#define MQTT_TOPIC_FREEHEAP "freeheap"
#define MQTT_TOPIC_VCC "vcc"
#define MQTT_TOPIC_STATUS "status"
#define MQTT_TOPIC_MAC "mac"
#define MQTT_TOPIC_RSSI "rssi"
#define MQTT_TOPIC_APP "app"
#define MQTT_TOPIC_INTERVAL "interval"
#define MQTT_TOPIC_HOSTNAME "hostname"
#define MQTT_TOPIC_ANALOG "analog"
// Periodic reports
#define MQTT_REPORT_STATUS 1
#define MQTT_REPORT_IP 1
#define MQTT_REPORT_MAC 1
#define MQTT_REPORT_RSSI 1
#define MQTT_REPORT_UPTIME 1
#define MQTT_REPORT_FREEHEAP 1
#define MQTT_REPORT_VCC 1
#define MQTT_REPORT_RELAY 1
#define MQTT_REPORT_COLOR 1
#define MQTT_REPORT_HOSTNAME 1
#define MQTT_REPORT_APP 1
#define MQTT_REPORT_VERSION 1
#define MQTT_REPORT_INTERVAL 0
#define MQTT_STATUS_ONLINE "1"
#define MQTT_STATUS_OFFLINE "0"
#define MQTT_ACTION_RESET "reset"
#define MQTT_CONNECT_EVENT 0
#define MQTT_DISCONNECT_EVENT 1
#define MQTT_MESSAGE_EVENT 2
// Custom get and set postfixes6+
// Use something like "/status" or "/set", with leading slash
#define MQTT_USE_GETTER ""
#define MQTT_USE_SETTER ""
// -----------------------------------------------------------------------------
// I2C
// -----------------------------------------------------------------------------
#define ENABLE_I2C 0
#define I2C_SDA_PIN 4
#define I2C_SCL_PIN 14
#define I2C_CLOCK_STRETCH_TIME 200
#define I2C_SCL_FREQUENCY 1000
// -----------------------------------------------------------------------------
// LIGHT
// -----------------------------------------------------------------------------
#define ENABLE_GAMMA_CORRECTION 0
#define LIGHT_PROVIDER_NONE 0
#define LIGHT_PROVIDER_WS2812 1
#define LIGHT_PROVIDER_RGB 2
#define LIGHT_PROVIDER_RGBW 3
#define LIGHT_PROVIDER_MY9192 4
#define LIGHT_PROVIDER_RGB2W 5
#define LIGHT_DEFAULT_COLOR "#000080"
#define LIGHT_SAVE_DELAY 5
#define LIGHT_MAX_VALUE 255
#define MY9291_DI_PIN 13
#define MY9291_DCKI_PIN 15
#define MY9291_COMMAND MY9291_COMMAND_DEFAULT
// Shared settings between RGB and RGBW lights
#define RGBW_INVERSE_LOGIC 1
#define RGBW_RED_PIN 14
#define RGBW_GREEN_PIN 5
#define RGBW_BLUE_PIN 12
#define RGBW_WHITE_PIN 13
// -----------------------------------------------------------------------------
// DOMOTICZ
// -----------------------------------------------------------------------------
#ifndef ENABLE_DOMOTICZ
#define ENABLE_DOMOTICZ 1
#endif
#define DOMOTICZ_IN_TOPIC "domoticz/in"
#define DOMOTICZ_OUT_TOPIC "domoticz/out"
// -----------------------------------------------------------------------------
// INFLUXDB
// -----------------------------------------------------------------------------
#ifndef ENABLE_INFLUXDB
#define ENABLE_INFLUXDB 1
#endif
#define INFLUXDB_PORT 8086
// -----------------------------------------------------------------------------
// NTP
// -----------------------------------------------------------------------------
#define NTP_SERVER "pool.ntp.org"
#define NTP_TIME_OFFSET 1
#define NTP_DAY_LIGHT true
#define NTP_UPDATE_INTERVAL 1800
// -----------------------------------------------------------------------------
// FAUXMO
// -----------------------------------------------------------------------------
// This setting defines whether Alexa support should be built into the firmware
#ifndef ENABLE_FAUXMO
#define ENABLE_FAUXMO 1
#endif
// This is default value for the fauxmoEnabled setting that defines whether
// this device should be discoberable and respond to Alexa commands.
// Both ENABLE_FAUXMO and fauxmoEnabled should be 1 for Alexa support to work.
#define FAUXMO_ENABLED 1