You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1288 lines
42 KiB
1288 lines
42 KiB
// // //------------------------------------------------------------------------------
|
|
// Do not change this file unless you know what you are doing
|
|
// Configuration settings are in the settings.h file
|
|
//------------------------------------------------------------------------------
|
|
|
|
//------------------------------------------------------------------------------
|
|
// GENERAL
|
|
//------------------------------------------------------------------------------
|
|
|
|
#define DEVICE_NAME MANUFACTURER "_" DEVICE // Concatenate both to get a unique device name
|
|
|
|
#ifndef ADMIN_PASS
|
|
#define ADMIN_PASS "fibonacci" // Default password (WEB, OTA, WIFI)
|
|
#endif
|
|
|
|
#ifndef USE_PASSWORD
|
|
#define USE_PASSWORD 1 // Insecurity caution! Disabling this will disable password querying completely.
|
|
#endif
|
|
|
|
#ifndef LOOP_DELAY_TIME
|
|
#define LOOP_DELAY_TIME 10 // Delay for this millis in the main loop [0-250]
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// DEBUG
|
|
//------------------------------------------------------------------------------
|
|
|
|
// Serial debug log
|
|
|
|
#ifndef DEBUG_SERIAL_SUPPORT
|
|
#define DEBUG_SERIAL_SUPPORT 1 // Enable serial debug log
|
|
#endif
|
|
|
|
#ifndef DEBUG_PORT
|
|
#define DEBUG_PORT Serial // Default debugging port
|
|
#endif
|
|
|
|
#ifndef SERIAL_BAUDRATE
|
|
#define SERIAL_BAUDRATE 115200 // Default baudrate
|
|
#endif
|
|
|
|
#ifndef DEBUG_ADD_TIMESTAMP
|
|
#define DEBUG_ADD_TIMESTAMP 1 // Add timestamp to debug messages
|
|
// (in millis overflowing every 1000 seconds)
|
|
#endif
|
|
|
|
// Second serial port (used for RX)
|
|
|
|
#ifndef SERIAL_RX_ENABLED
|
|
#define SERIAL_RX_ENABLED 0 // Secondary serial port for RX
|
|
#endif
|
|
|
|
#ifndef SERIAL_RX_PORT
|
|
#define SERIAL_RX_PORT Serial // This setting is usually defined
|
|
// in the hardware.h file for those
|
|
// boards that require it
|
|
#endif
|
|
|
|
#ifndef SERIAL_RX_BAUDRATE
|
|
#define SERIAL_RX_BAUDRATE 115200 // Default baudrate
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
|
|
// UDP debug log
|
|
// To receive the message son the destination computer use nc:
|
|
// nc -ul 8113
|
|
|
|
#ifndef DEBUG_UDP_SUPPORT
|
|
#define DEBUG_UDP_SUPPORT 0 // Enable UDP debug log
|
|
#endif
|
|
|
|
#ifndef DEBUG_UDP_IP
|
|
#define DEBUG_UDP_IP IPAddress(192, 168, 1, 100)
|
|
#endif
|
|
|
|
#ifndef DEBUG_UDP_PORT
|
|
#define DEBUG_UDP_PORT 514
|
|
#endif
|
|
|
|
// If DEBUG_UDP_PORT is set to 514 syslog format is assumed
|
|
// (https://tools.ietf.org/html/rfc3164)
|
|
// DEBUG_UDP_FAC_PRI is the facility+priority
|
|
#define DEBUG_UDP_FAC_PRI (SYSLOG_LOCAL0 | SYSLOG_DEBUG)
|
|
|
|
//------------------------------------------------------------------------------
|
|
|
|
#ifndef DEBUG_TELNET_SUPPORT
|
|
#define DEBUG_TELNET_SUPPORT 1 // Enable telnet debug log (will only work if TELNET_SUPPORT is also 1)
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
|
|
#ifndef DEBUG_WEB_SUPPORT
|
|
#define DEBUG_WEB_SUPPORT 1 // Enable web debug log (will only work if WEB_SUPPORT is also 1)
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// TELNET
|
|
//------------------------------------------------------------------------------
|
|
|
|
#ifndef TELNET_SUPPORT
|
|
#define TELNET_SUPPORT 1 // Enable telnet support by default (3.34Kb)
|
|
#endif
|
|
|
|
#ifndef TELNET_STA
|
|
#define TELNET_STA 0 // By default, disallow connections via STA interface
|
|
#endif
|
|
|
|
#define TELNET_PORT 23 // Port to listen to telnet clients
|
|
#define TELNET_MAX_CLIENTS 1 // Max number of concurrent telnet clients
|
|
|
|
//------------------------------------------------------------------------------
|
|
// TERMINAL
|
|
//------------------------------------------------------------------------------
|
|
|
|
#ifndef TERMINAL_SUPPORT
|
|
#define TERMINAL_SUPPORT 1 // Enable terminal commands (0.97Kb)
|
|
#endif
|
|
|
|
#define TERMINAL_BUFFER_SIZE 128 // Max size for commands commands
|
|
|
|
//------------------------------------------------------------------------------
|
|
// SYSTEM CHECK
|
|
//------------------------------------------------------------------------------
|
|
|
|
#ifndef SYSTEM_CHECK_ENABLED
|
|
#define SYSTEM_CHECK_ENABLED 1 // Enable crash check by default
|
|
#endif
|
|
|
|
#ifndef SYSTEM_CHECK_TIME
|
|
#define SYSTEM_CHECK_TIME 60000 // The system is considered stable after these many millis
|
|
#endif
|
|
|
|
#ifndef SYSTEM_CHECK_MAX
|
|
#define SYSTEM_CHECK_MAX 5 // After this many crashes on boot
|
|
// the system is flagged as unstable
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// EEPROM
|
|
//------------------------------------------------------------------------------
|
|
|
|
#define EEPROM_SIZE 4096 // EEPROM size in bytes
|
|
//#define EEPROM_RORATE_SECTORS 2 // Number of sectors to use for EEPROM rotation
|
|
// If not defined the firmware will use a number based
|
|
// on the number of available sectors
|
|
|
|
#define EEPROM_RELAY_STATUS 0 // Address for the relay status (1 byte)
|
|
#define EEPROM_ENERGY_COUNT 1 // Address for the energy counter (4 bytes)
|
|
#define EEPROM_CUSTOM_RESET 5 // Address for the reset reason (1 byte)
|
|
#define EEPROM_CRASH_COUNTER 6 // Address for the crash counter (1 byte)
|
|
#define EEPROM_MESSAGE_ID 7 // Address for the MQTT message id (4 bytes)
|
|
#define EEPROM_ROTATE_DATA 11 // Reserved for the EEPROM_ROTATE library (3 bytes)
|
|
#define EEPROM_DATA_END 14 // End of custom EEPROM data block
|
|
|
|
//------------------------------------------------------------------------------
|
|
// HEARTBEAT
|
|
//------------------------------------------------------------------------------
|
|
|
|
#ifndef HEARTBEAT_ENABLED
|
|
#define HEARTBEAT_ENABLED 1
|
|
#endif
|
|
|
|
#ifndef HEARTBEAT_INTERVAL
|
|
#define HEARTBEAT_INTERVAL 300000 // Interval between heartbeat messages (in ms)
|
|
#endif
|
|
|
|
#define UPTIME_OVERFLOW 4294967295 // Uptime overflow value
|
|
|
|
// Topics that will be reported in heartbeat
|
|
#define HEARTBEAT_REPORT_STATUS 1
|
|
#define HEARTBEAT_REPORT_IP 1
|
|
#define HEARTBEAT_REPORT_MAC 1
|
|
#define HEARTBEAT_REPORT_RSSI 1
|
|
#define HEARTBEAT_REPORT_UPTIME 1
|
|
#define HEARTBEAT_REPORT_DATETIME 1
|
|
#define HEARTBEAT_REPORT_FREEHEAP 1
|
|
#define HEARTBEAT_REPORT_VCC 1
|
|
#define HEARTBEAT_REPORT_RELAY 1
|
|
#define HEARTBEAT_REPORT_LIGHT 1
|
|
#define HEARTBEAT_REPORT_HOSTNAME 1
|
|
#define HEARTBEAT_REPORT_APP 1
|
|
#define HEARTBEAT_REPORT_VERSION 1
|
|
#define HEARTBEAT_REPORT_BOARD 1
|
|
#define HEARTBEAT_REPORT_INTERVAL 0
|
|
|
|
//------------------------------------------------------------------------------
|
|
// Load average
|
|
//------------------------------------------------------------------------------
|
|
|
|
#ifndef LOADAVG_INTERVAL
|
|
#define LOADAVG_INTERVAL 30000 // Interval between calculating load average (in ms)
|
|
#endif
|
|
|
|
#ifndef LOADAVG_REPORT
|
|
#define LOADAVG_REPORT 1 // Should we report Load average over MQTT?
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// BUTTON
|
|
//------------------------------------------------------------------------------
|
|
|
|
#ifndef BUTTON_SUPPORT
|
|
#define BUTTON_SUPPORT 1
|
|
#endif
|
|
|
|
#ifndef BUTTON_DEBOUNCE_DELAY
|
|
#define BUTTON_DEBOUNCE_DELAY 50 // Debounce delay (ms)
|
|
#endif
|
|
|
|
#ifndef BUTTON_DBLCLICK_DELAY
|
|
#define BUTTON_DBLCLICK_DELAY 500 // Time in ms to wait for a second (or third...) click
|
|
#endif
|
|
|
|
#ifndef BUTTON_LNGCLICK_DELAY
|
|
#define BUTTON_LNGCLICK_DELAY 1000 // Time in ms holding the button down to get a long click
|
|
#endif
|
|
|
|
#ifndef BUTTON_LNGLNGCLICK_DELAY
|
|
#define BUTTON_LNGLNGCLICK_DELAY 10000 // Time in ms holding the button down to get a long-long click
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// LED
|
|
//------------------------------------------------------------------------------
|
|
|
|
#ifndef LED_SUPPORT
|
|
#define LED_SUPPORT 1
|
|
#endif
|
|
|
|
//------------------------------------------------------------------------------
|
|
// RELAY
|
|
//------------------------------------------------------------------------------
|
|
|
|
// Default boot mode: 0 means OFF, 1 ON and 2 whatever was before
|
|
#ifndef RELAY_BOOT_MODE
|
|
#define RELAY_BOOT_MODE RELAY_BOOT_OFF
|
|
#endif
|
|
|
|
// 0 means ANY, 1 zero or one and 2 one and only one
|
|
#ifndef RELAY_SYNC
|
|
#define RELAY_SYNC RELAY_SYNC_ANY
|
|
#endif
|
|
|
|
// Default pulse mode: 0 means no pulses, 1 means normally off, 2 normally on
|
|
#ifndef RELAY_PULSE_MODE
|
|
#define RELAY_PULSE_MODE RELAY_PULSE_NONE
|
|
#endif
|
|
|
|
// Default pulse time in seconds
|
|
#ifndef RELAY_PULSE_TIME
|
|
#define RELAY_PULSE_TIME 1.0
|
|
#endif
|
|
|
|
// Relay requests flood protection window - in seconds
|
|
#ifndef RELAY_FLOOD_WINDOW
|
|
#define RELAY_FLOOD_WINDOW 3
|
|
#endif
|
|
|
|
// Allowed actual relay changes inside requests flood protection window
|
|
#ifndef RELAY_FLOOD_CHANGES
|
|
#define RELAY_FLOOD_CHANGES 5
|
|
#endif
|
|
|
|
// Pulse with in milliseconds for a latched relay
|
|
#ifndef RELAY_LATCHING_PULSE
|
|
#define RELAY_LATCHING_PULSE 10
|
|
#endif
|
|
|
|
// Do not save relay state after these many milliseconds
|
|
#ifndef RELAY_SAVE_DELAY
|
|
#define RELAY_SAVE_DELAY 1000
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// WIFI
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef WIFI_CONNECT_TIMEOUT
|
|
#define WIFI_CONNECT_TIMEOUT 60000 // Connecting timeout for WIFI in ms
|
|
#endif
|
|
|
|
#ifndef WIFI_RECONNECT_INTERVAL
|
|
#define WIFI_RECONNECT_INTERVAL 180000 // If could not connect to WIFI, retry after this time in ms
|
|
#endif
|
|
|
|
#ifndef WIFI_MAX_NETWORKS
|
|
#define WIFI_MAX_NETWORKS 5 // Max number of WIFI connection configurations
|
|
#endif
|
|
|
|
#ifndef WIFI_AP_CAPTIVE
|
|
#define WIFI_AP_CAPTIVE 1 // Captive portal enabled when in AP mode
|
|
#endif
|
|
|
|
|
|
#ifndef WIFI_SLEEP_MODE
|
|
#define WIFI_SLEEP_MODE WIFI_NONE_SLEEP // WIFI_NONE_SLEEP, WIFI_LIGHT_SLEEP or WIFI_MODEM_SLEEP
|
|
#endif
|
|
|
|
#ifndef WIFI_SCAN_NETWORKS
|
|
#define WIFI_SCAN_NETWORKS 1 // Perform a network scan before connecting
|
|
#endif
|
|
|
|
// Optional hardcoded configuration (up to 2 networks)
|
|
#ifndef WIFI1_SSID
|
|
#define WIFI1_SSID ""
|
|
#endif
|
|
|
|
#ifndef WIFI1_PASS
|
|
#define WIFI1_PASS ""
|
|
#endif
|
|
|
|
#ifndef WIFI1_IP
|
|
#define WIFI1_IP ""
|
|
#endif
|
|
|
|
#ifndef WIFI1_GW
|
|
#define WIFI1_GW ""
|
|
#endif
|
|
|
|
#ifndef WIFI1_MASK
|
|
#define WIFI1_MASK ""
|
|
#endif
|
|
|
|
#ifndef WIFI1_DNS
|
|
#define WIFI1_DNS ""
|
|
#endif
|
|
|
|
#ifndef WIFI2_SSID
|
|
#define WIFI2_SSID ""
|
|
#endif
|
|
|
|
#ifndef WIFI2_PASS
|
|
#define WIFI2_PASS ""
|
|
#endif
|
|
|
|
#ifndef WIFI2_IP
|
|
#define WIFI2_IP ""
|
|
#endif
|
|
|
|
#ifndef WIFI2_GW
|
|
#define WIFI2_GW ""
|
|
#endif
|
|
|
|
#ifndef WIFI2_MASK
|
|
#define WIFI2_MASK ""
|
|
#endif
|
|
|
|
#ifndef WIFI2_DNS
|
|
#define WIFI2_DNS ""
|
|
#endif
|
|
|
|
#ifndef WIFI_RSSI_1M
|
|
#define WIFI_RSSI_1M -30 // Calibrate it with your router reading the RSSI at 1m
|
|
#endif
|
|
|
|
#ifndef WIFI_PROPAGATION_CONST
|
|
#define WIFI_PROPAGATION_CONST 4 // This is typically something between 2.7 to 4.3 (free space is 2)
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// WEB
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef WEB_SUPPORT
|
|
#define WEB_SUPPORT 1 // Enable web support (http, api, 121.65Kb)
|
|
#endif
|
|
|
|
#ifndef WEB_EMBEDDED
|
|
#define WEB_EMBEDDED 1 // Build the firmware with the web interface embedded in
|
|
#endif
|
|
|
|
// This is not working at the moment!!
|
|
// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0
|
|
#ifndef WEB_SSL_ENABLED
|
|
#define WEB_SSL_ENABLED 0 // Use HTTPS web interface
|
|
#endif
|
|
|
|
#ifndef WEB_USERNAME
|
|
#define WEB_USERNAME "admin" // HTTP username
|
|
#endif
|
|
|
|
#ifndef WEB_FORCE_PASS_CHANGE
|
|
#define WEB_FORCE_PASS_CHANGE 1 // Force the user to change the password if default one
|
|
#endif
|
|
|
|
#ifndef WEB_PORT
|
|
#define WEB_PORT 80 // HTTP port
|
|
#endif
|
|
|
|
// Defining a WEB_REMOTE_DOMAIN will enable Cross-Origin Resource Sharing (CORS)
|
|
// so you will be able to login to this device from another domain. This will allow
|
|
// you to manage all ESPurna devices in your local network from a unique installation
|
|
// of the web UI. This installation could be in a local server (a Raspberry Pi, for instance)
|
|
// or in the Internet. Since the WebUI is just one compressed file with HTML, CSS and JS
|
|
// there are no special requirements. Any static web server will do (NGinx, Apache, Lighttpd,...).
|
|
// The only requirement is that the resource must be available under this domain.
|
|
#define WEB_REMOTE_DOMAIN "http://tinkerman.cat"
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// WEBSOCKETS
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)
|
|
#ifndef WS_AUTHENTICATION
|
|
#define WS_AUTHENTICATION 1 // WS authentication ON by default (see #507)
|
|
#endif
|
|
|
|
#ifndef WS_BUFFER_SIZE
|
|
#define WS_BUFFER_SIZE 5 // Max number of secured websocket connections
|
|
#endif
|
|
|
|
#ifndef WS_TIMEOUT
|
|
#define WS_TIMEOUT 1800000 // Timeout for secured websocket
|
|
#endif
|
|
|
|
#ifndef WS_UPDATE_INTERVAL
|
|
#define WS_UPDATE_INTERVAL 30000 // Update clients every 30 seconds
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// API
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)
|
|
#ifndef API_ENABLED
|
|
#define API_ENABLED 0 // Do not enable API by default
|
|
#endif
|
|
|
|
#ifndef API_BUFFER_SIZE
|
|
#define API_BUFFER_SIZE 15 // Size of the buffer for HTTP GET API responses
|
|
#endif
|
|
|
|
#ifndef API_REAL_TIME_VALUES
|
|
#define API_REAL_TIME_VALUES 0 // Show filtered/median values by default (0 => median, 1 => real time)
|
|
#endif
|
|
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// MDNS / LLMNR / NETBIOS / SSDP
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef MDNS_SERVER_SUPPORT
|
|
#define MDNS_SERVER_SUPPORT 1 // Publish services using mDNS by default (1.48Kb)
|
|
#endif
|
|
|
|
#ifndef MDNS_CLIENT_SUPPORT
|
|
#define MDNS_CLIENT_SUPPORT 0 // Resolve mDNS names (3.44Kb)
|
|
#endif
|
|
|
|
#ifndef LLMNR_SUPPORT
|
|
#define LLMNR_SUPPORT 0 // Publish device using LLMNR protocol by default (1.95Kb) - requires 2.4.0
|
|
#endif
|
|
|
|
#ifndef NETBIOS_SUPPORT
|
|
#define NETBIOS_SUPPORT 0 // Publish device using NetBIOS protocol by default (1.26Kb) - requires 2.4.0
|
|
#endif
|
|
|
|
#ifndef SSDP_SUPPORT
|
|
#define SSDP_SUPPORT 0 // Publish device using SSDP protocol by default (4.59Kb)
|
|
// Not compatible with ALEXA_SUPPORT at the moment
|
|
#endif
|
|
|
|
#ifndef SSDP_DEVICE_TYPE
|
|
#define SSDP_DEVICE_TYPE "upnp:rootdevice"
|
|
//#define SSDP_DEVICE_TYPE "urn:schemas-upnp-org:device:BinaryLight:1"
|
|
#endif
|
|
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// SPIFFS
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef SPIFFS_SUPPORT
|
|
#define SPIFFS_SUPPORT 0 // Do not add support for SPIFFS by default
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// OTA
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef OTA_PORT
|
|
#define OTA_PORT 8266 // OTA port
|
|
#endif
|
|
|
|
#define OTA_GITHUB_FP "D7:9F:07:61:10:B3:92:93:E3:49:AC:89:84:5B:03:80:C1:9E:2F:8B"
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// NOFUSS
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef NOFUSS_SUPPORT
|
|
#define NOFUSS_SUPPORT 0 // Do not enable support for NoFuss by default (12.65Kb)
|
|
#endif
|
|
|
|
#ifndef NOFUSS_ENABLED
|
|
#define NOFUSS_ENABLED 0 // Do not perform NoFUSS updates by default
|
|
#endif
|
|
|
|
#ifndef NOFUSS_SERVER
|
|
#define NOFUSS_SERVER "" // Default NoFuss Server
|
|
#endif
|
|
|
|
#ifndef NOFUSS_INTERVAL
|
|
#define NOFUSS_INTERVAL 3600000 // Check for updates every hour
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// UART <-> MQTT
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef UART_MQTT_SUPPORT
|
|
#define UART_MQTT_SUPPORT 0 // No support by default
|
|
#endif
|
|
|
|
#ifndef UART_MQTT_USE_SOFT
|
|
#define UART_MQTT_USE_SOFT 0 // Use SoftwareSerial
|
|
#endif
|
|
|
|
#ifndef UART_MQTT_HW_PORT
|
|
#define UART_MQTT_HW_PORT Serial // Hardware serial port (if UART_MQTT_USE_SOFT == 0)
|
|
#endif
|
|
|
|
#ifndef UART_MQTT_RX_PIN
|
|
#define UART_MQTT_RX_PIN 4 // RX PIN (if UART_MQTT_USE_SOFT == 1)
|
|
#endif
|
|
|
|
#ifndef UART_MQTT_TX_PIN
|
|
#define UART_MQTT_TX_PIN 5 // TX PIN (if UART_MQTT_USE_SOFT == 1)
|
|
#endif
|
|
|
|
#ifndef UART_MQTT_BAUDRATE
|
|
#define UART_MQTT_BAUDRATE 115200 // Serial speed
|
|
#endif
|
|
|
|
#ifndef UART_MQTT_TERMINATION
|
|
#define UART_MQTT_TERMINATION '\n' // Termination character
|
|
#endif
|
|
|
|
#define UART_MQTT_BUFFER_SIZE 100 // UART buffer size
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// MQTT
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef MQTT_SUPPORT
|
|
#define MQTT_SUPPORT 1 // MQTT support (22.38Kb async, 12.48Kb sync)
|
|
#endif
|
|
|
|
|
|
#ifndef MQTT_USE_ASYNC
|
|
#define MQTT_USE_ASYNC 1 // Use AysncMQTTClient (1) or PubSubClient (0)
|
|
#endif
|
|
|
|
// MQTT OVER SSL
|
|
// Using MQTT over SSL works pretty well but generates problems with the web interface.
|
|
// It could be a good idea to use it in conjuntion with WEB_SUPPORT=0.
|
|
// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0.
|
|
//
|
|
// You can use SSL with MQTT_USE_ASYNC=1 (AsyncMqttClient library)
|
|
// but you might experience hiccups on the web interface, so my recommendation is:
|
|
// WEB_SUPPORT=0
|
|
//
|
|
// If you use SSL with MQTT_USE_ASYNC=0 (PubSubClient library)
|
|
// you will have to disable all the modules that use ESPAsyncTCP, that is:
|
|
// ALEXA_SUPPORT=0, INFLUXDB_SUPPORT=0, TELNET_SUPPORT=0, THINGSPEAK_SUPPORT=0 and WEB_SUPPORT=0
|
|
//
|
|
// You will need the fingerprint for your MQTT server, example for CloudMQTT:
|
|
// $ echo -n | openssl s_client -connect m11.cloudmqtt.com:24055 > cloudmqtt.pem
|
|
// $ openssl x509 -noout -in cloudmqtt.pem -fingerprint -sha1
|
|
|
|
#ifndef MQTT_SSL_ENABLED
|
|
#define MQTT_SSL_ENABLED 0 // By default MQTT over SSL will not be enabled
|
|
#endif
|
|
|
|
#ifndef MQTT_SSL_FINGERPRINT
|
|
#define MQTT_SSL_FINGERPRINT "" // SSL fingerprint of the server
|
|
#endif
|
|
|
|
|
|
#ifndef MQTT_ENABLED
|
|
#define MQTT_ENABLED 0 // Do not enable MQTT connection by default
|
|
#endif
|
|
|
|
#ifndef MQTT_AUTOCONNECT
|
|
#define MQTT_AUTOCONNECT 1 // If enabled and MDNS_SERVER_SUPPORT=1 will perform an autodiscover and
|
|
// autoconnect to the first MQTT broker found if none defined
|
|
#endif
|
|
|
|
#ifndef MQTT_SERVER
|
|
#define MQTT_SERVER "" // Default MQTT broker address
|
|
#endif
|
|
|
|
#ifndef MQTT_USER
|
|
#define MQTT_USER "" // Default MQTT broker usename
|
|
#endif
|
|
|
|
#ifndef MQTT_PASS
|
|
#define MQTT_PASS "" // Default MQTT broker password
|
|
#endif
|
|
|
|
#ifndef MQTT_PORT
|
|
#define MQTT_PORT 1883 // MQTT broker port
|
|
#endif
|
|
|
|
#ifndef MQTT_TOPIC
|
|
#define MQTT_TOPIC "{hostname}" // Default MQTT base topic
|
|
#endif
|
|
|
|
#ifndef MQTT_RETAIN
|
|
#define MQTT_RETAIN true // MQTT retain flag
|
|
#endif
|
|
|
|
#ifndef MQTT_QOS
|
|
#define MQTT_QOS 0 // MQTT QoS value for all messages
|
|
#endif
|
|
|
|
#ifndef MQTT_KEEPALIVE
|
|
#define MQTT_KEEPALIVE 300 // MQTT keepalive value
|
|
#endif
|
|
|
|
|
|
#ifndef MQTT_RECONNECT_DELAY_MIN
|
|
#define MQTT_RECONNECT_DELAY_MIN 5000 // Try to reconnect in 5 seconds upon disconnection
|
|
#endif
|
|
|
|
#ifndef MQTT_RECONNECT_DELAY_STEP
|
|
#define MQTT_RECONNECT_DELAY_STEP 5000 // Increase the reconnect delay in 5 seconds after each failed attempt
|
|
#endif
|
|
|
|
#ifndef MQTT_RECONNECT_DELAY_MAX
|
|
#define MQTT_RECONNECT_DELAY_MAX 120000 // Set reconnect time to 2 minutes at most
|
|
#endif
|
|
|
|
|
|
#ifndef MQTT_SKIP_RETAINED
|
|
#define MQTT_SKIP_RETAINED 1 // Skip retained messages on connection
|
|
#endif
|
|
|
|
#ifndef MQTT_SKIP_TIME
|
|
#define MQTT_SKIP_TIME 1000 // Skip messages for 1 second anter connection
|
|
#endif
|
|
|
|
|
|
#ifndef MQTT_USE_JSON
|
|
#define MQTT_USE_JSON 0 // Group messages in a JSON body
|
|
#endif
|
|
|
|
#ifndef MQTT_USE_JSON_DELAY
|
|
#define MQTT_USE_JSON_DELAY 100 // Wait this many ms before grouping messages
|
|
#endif
|
|
|
|
#ifndef MQTT_QUEUE_MAX_SIZE
|
|
#define MQTT_QUEUE_MAX_SIZE 20 // Size of the MQTT queue when MQTT_USE_JSON is enabled
|
|
#endif
|
|
|
|
|
|
// These are the properties that will be sent when useJson is true
|
|
#ifndef MQTT_ENQUEUE_IP
|
|
#define MQTT_ENQUEUE_IP 1
|
|
#endif
|
|
|
|
#ifndef MQTT_ENQUEUE_MAC
|
|
#define MQTT_ENQUEUE_MAC 1
|
|
#endif
|
|
|
|
#ifndef MQTT_ENQUEUE_HOSTNAME
|
|
#define MQTT_ENQUEUE_HOSTNAME 1
|
|
#endif
|
|
|
|
#ifndef MQTT_ENQUEUE_DATETIME
|
|
#define MQTT_ENQUEUE_DATETIME 1
|
|
#endif
|
|
|
|
#ifndef MQTT_ENQUEUE_MESSAGE_ID
|
|
#define MQTT_ENQUEUE_MESSAGE_ID 1
|
|
#endif
|
|
|
|
// These particles will be concatenated to the MQTT_TOPIC base to form the actual topic
|
|
#define MQTT_TOPIC_JSON "data"
|
|
#define MQTT_TOPIC_ACTION "action"
|
|
#define MQTT_TOPIC_RELAY "relay"
|
|
#define MQTT_TOPIC_LED "led"
|
|
#define MQTT_TOPIC_BUTTON "button"
|
|
#define MQTT_TOPIC_IP "ip"
|
|
#define MQTT_TOPIC_VERSION "version"
|
|
#define MQTT_TOPIC_UPTIME "uptime"
|
|
#define MQTT_TOPIC_DATETIME "datetime"
|
|
#define MQTT_TOPIC_FREEHEAP "freeheap"
|
|
#define MQTT_TOPIC_VCC "vcc"
|
|
#define MQTT_TOPIC_STATUS "status"
|
|
#define MQTT_TOPIC_MAC "mac"
|
|
#define MQTT_TOPIC_RSSI "rssi"
|
|
#define MQTT_TOPIC_MESSAGE_ID "id"
|
|
#define MQTT_TOPIC_APP "app"
|
|
#define MQTT_TOPIC_INTERVAL "interval"
|
|
#define MQTT_TOPIC_HOSTNAME "host"
|
|
#define MQTT_TOPIC_TIME "time"
|
|
#define MQTT_TOPIC_RFOUT "rfout"
|
|
#define MQTT_TOPIC_RFIN "rfin"
|
|
#define MQTT_TOPIC_RFLEARN "rflearn"
|
|
#define MQTT_TOPIC_RFRAW "rfraw"
|
|
#define MQTT_TOPIC_UARTIN "uartin"
|
|
#define MQTT_TOPIC_UARTOUT "uartout"
|
|
#define MQTT_TOPIC_LOADAVG "loadavg"
|
|
#define MQTT_TOPIC_BOARD "board"
|
|
#define MQTT_TOPIC_PULSE "pulse"
|
|
#define MQTT_TOPIC_SPEED "speed"
|
|
|
|
// Light module
|
|
#define MQTT_TOPIC_CHANNEL "channel"
|
|
#define MQTT_TOPIC_COLOR_RGB "rgb"
|
|
#define MQTT_TOPIC_COLOR_HSV "hsv"
|
|
#define MQTT_TOPIC_ANIM_MODE "anim_mode"
|
|
#define MQTT_TOPIC_ANIM_SPEED "anim_speed"
|
|
#define MQTT_TOPIC_BRIGHTNESS "brightness"
|
|
#define MQTT_TOPIC_MIRED "mired"
|
|
#define MQTT_TOPIC_KELVIN "kelvin"
|
|
|
|
#define MQTT_STATUS_ONLINE "1" // Value for the device ON message
|
|
#define MQTT_STATUS_OFFLINE "0" // Value for the device OFF message (will)
|
|
|
|
#define MQTT_ACTION_RESET "reboot" // RESET MQTT topic particle
|
|
|
|
#define MQTT_MESSAGE_ID_SHIFT 1000 // Store MQTT message id into EEPROM every these many
|
|
|
|
// Custom get and set postfixes
|
|
// Use something like "/status" or "/set", with leading slash
|
|
// Since 1.9.0 the default value is "" for getter and "/set" for setter
|
|
#ifndef MQTT_GETTER
|
|
#define MQTT_GETTER ""
|
|
#endif
|
|
|
|
#ifndef MQTT_SETTER
|
|
#define MQTT_SETTER "/set"
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// BROKER
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef BROKER_SUPPORT
|
|
#define BROKER_SUPPORT 1 // The broker is a poor-man's pubsub manager
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// SETTINGS
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef SETTINGS_AUTOSAVE
|
|
#define SETTINGS_AUTOSAVE 1 // Autosave settings o force manual commit
|
|
#endif
|
|
|
|
#define SETTINGS_MAX_LIST_COUNT 10 // Maximum index for settings lists
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// LIGHT
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// LIGHT_PROVIDER_DIMMER can have from 1 to 5 different channels.
|
|
// They have to be defined for each device in the hardware.h file.
|
|
// If 3 or more channels first 3 will be considered RGB.
|
|
// Usual configurations are:
|
|
// 1 channels => W
|
|
// 2 channels => WW
|
|
// 3 channels => RGB
|
|
// 4 channels => RGBW
|
|
// 5 channels => RGBWW
|
|
|
|
#ifndef LIGHT_SAVE_ENABLED
|
|
#define LIGHT_SAVE_ENABLED 1 // Light channel values saved by default after each change
|
|
#endif
|
|
|
|
#ifndef LIGHT_SAVE_DELAY
|
|
#define LIGHT_SAVE_DELAY 5 // Persist color after 5 seconds to avoid wearing out
|
|
#endif
|
|
|
|
|
|
#ifndef LIGHT_MAX_PWM
|
|
|
|
#if LIGHT_PROVIDER == LIGHT_PROVIDER_MY92XX
|
|
#define LIGHT_MAX_PWM 255
|
|
#endif
|
|
|
|
#if LIGHT_PROVIDER == LIGHT_PROVIDER_DIMMER
|
|
#define LIGHT_MAX_PWM 10000 // 10000 * 200ns => 2 kHz
|
|
#endif
|
|
|
|
#endif // LIGHT_MAX_PWM
|
|
|
|
#ifndef LIGHT_LIMIT_PWM
|
|
#define LIGHT_LIMIT_PWM LIGHT_MAX_PWM // Limit PWM to this value (prevent 100% power)
|
|
#endif
|
|
|
|
#ifndef LIGHT_MAX_VALUE
|
|
#define LIGHT_MAX_VALUE 255 // Maximum light value
|
|
#endif
|
|
|
|
#ifndef LIGHT_MAX_BRIGHTNESS
|
|
#define LIGHT_MAX_BRIGHTNESS 255 // Maximun brightness value
|
|
#endif
|
|
|
|
#define LIGHT_MIN_MIREDS 153 // Default to the Philips Hue value that HA also use.
|
|
#define LIGHT_MAX_MIREDS 500 // https://developers.meethue.com/documentation/core-concepts
|
|
|
|
#ifndef LIGHT_STEP
|
|
#define LIGHT_STEP 32 // Step size
|
|
#endif
|
|
|
|
#ifndef LIGHT_USE_COLOR
|
|
#define LIGHT_USE_COLOR 1 // Use 3 first channels as RGB
|
|
#endif
|
|
|
|
#ifndef LIGHT_USE_WHITE
|
|
#define LIGHT_USE_WHITE 0 // Use the 4th channel as (Warm-)White LEDs
|
|
#endif
|
|
|
|
#ifndef LIGHT_USE_CCT
|
|
#define LIGHT_USE_CCT 0 // Use the 5th channel as Coldwhite LEDs, LIGHT_USE_WHITE must be 1.
|
|
#endif
|
|
|
|
// Used when LIGHT_USE_WHITE AND LIGHT_USE_CCT is 1 - (1000000/Kelvin = MiReds)
|
|
// Warning! Don't change this yet, NOT FULLY IMPLEMENTED!
|
|
#define LIGHT_COLDWHITE_MIRED 153 // Coldwhite Strip, Value must be __BELOW__ W2!! (Default: 6535 Kelvin/153 MiRed)
|
|
#define LIGHT_WARMWHITE_MIRED 500 // Warmwhite Strip, Value must be __ABOVE__ W1!! (Default: 2000 Kelvin/500 MiRed)
|
|
|
|
#ifndef LIGHT_USE_GAMMA
|
|
#define LIGHT_USE_GAMMA 0 // Use gamma correction for color channels
|
|
#endif
|
|
|
|
#ifndef LIGHT_USE_CSS
|
|
#define LIGHT_USE_CSS 1 // Use CSS style to report colors (1=> "#FF0000", 0=> "255,0,0")
|
|
#endif
|
|
|
|
#ifndef LIGHT_USE_RGB
|
|
#define LIGHT_USE_RGB 0 // Use RGB color selector (1=> RGB, 0=> HSV)
|
|
#endif
|
|
|
|
#ifndef LIGHT_WHITE_FACTOR
|
|
#define LIGHT_WHITE_FACTOR 1 // When using LIGHT_USE_WHITE with uneven brightness LEDs,
|
|
// this factor is used to scale the white channel to match brightness
|
|
#endif
|
|
|
|
|
|
#ifndef LIGHT_USE_TRANSITIONS
|
|
#define LIGHT_USE_TRANSITIONS 1 // Transitions between colors
|
|
#endif
|
|
|
|
#ifndef LIGHT_TRANSITION_STEP
|
|
#define LIGHT_TRANSITION_STEP 10 // Time in millis between each transtion step
|
|
#endif
|
|
|
|
#ifndef LIGHT_TRANSITION_TIME
|
|
#define LIGHT_TRANSITION_TIME 500 // Time in millis from color to color
|
|
#endif
|
|
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// DOMOTICZ
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef DOMOTICZ_SUPPORT
|
|
#define DOMOTICZ_SUPPORT MQTT_SUPPORT // Build with domoticz (if MQTT) support (1.72Kb)
|
|
#endif
|
|
|
|
#define DOMOTICZ_ENABLED 0 // Disable domoticz by default
|
|
#define DOMOTICZ_IN_TOPIC "domoticz/in" // Default subscription topic
|
|
#define DOMOTICZ_OUT_TOPIC "domoticz/out" // Default publication topic
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// HOME ASSISTANT
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef HOMEASSISTANT_SUPPORT
|
|
#define HOMEASSISTANT_SUPPORT MQTT_SUPPORT // Build with home assistant support (if MQTT, 1.64Kb)
|
|
#endif
|
|
|
|
#define HOMEASSISTANT_ENABLED 0 // Integration not enabled by default
|
|
#define HOMEASSISTANT_PREFIX "homeassistant" // Default MQTT prefix
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// INFLUXDB
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef INFLUXDB_SUPPORT
|
|
#define INFLUXDB_SUPPORT 0 // Disable InfluxDB support by default (4.38Kb)
|
|
#endif
|
|
|
|
#ifndef INFLUXDB_ENABLED
|
|
#define INFLUXDB_ENABLED 0 // InfluxDB disabled by default
|
|
#endif
|
|
|
|
#ifndef INFLUXDB_HOST
|
|
#define INFLUXDB_HOST "" // Default server
|
|
#endif
|
|
|
|
#ifndef INFLUXDB_PORT
|
|
#define INFLUXDB_PORT 8086 // Default InfluxDB port
|
|
#endif
|
|
|
|
#ifndef INFLUXDB_DATABASE
|
|
#define INFLUXDB_DATABASE "" // Default database
|
|
#endif
|
|
|
|
#ifndef INFLUXDB_USERNAME
|
|
#define INFLUXDB_USERNAME "" // Default username
|
|
#endif
|
|
|
|
#ifndef INFLUXDB_PASSWORD
|
|
#define INFLUXDB_PASSWORD "" // Default password
|
|
#endif
|
|
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// THINGSPEAK
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef THINGSPEAK_SUPPORT
|
|
#define THINGSPEAK_SUPPORT 1 // Enable Thingspeak support by default (2.56Kb)
|
|
#endif
|
|
|
|
#ifndef THINGSPEAK_ENABLED
|
|
#define THINGSPEAK_ENABLED 0 // Thingspeak disabled by default
|
|
#endif
|
|
|
|
#ifndef THINGSPEAK_APIKEY
|
|
#define THINGSPEAK_APIKEY "" // Default API KEY
|
|
#endif
|
|
|
|
#define THINGSPEAK_USE_ASYNC 1 // Use AsyncClient instead of WiFiClientSecure
|
|
|
|
// THINGSPEAK OVER SSL
|
|
// Using THINGSPEAK over SSL works well but generates problems with the web interface,
|
|
// so you should compile it with WEB_SUPPORT to 0.
|
|
// When THINGSPEAK_USE_ASYNC is 1, requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0.
|
|
#define THINGSPEAK_USE_SSL 0 // Use secure connection
|
|
|
|
#define THINGSPEAK_FINGERPRINT "78 60 18 44 81 35 BF DF 77 84 D4 0A 22 0D 9B 4E 6C DC 57 2C"
|
|
|
|
#define THINGSPEAK_HOST "api.thingspeak.com"
|
|
#if THINGSPEAK_USE_SSL
|
|
#define THINGSPEAK_PORT 443
|
|
#else
|
|
#define THINGSPEAK_PORT 80
|
|
#endif
|
|
|
|
#define THINGSPEAK_URL "/update"
|
|
|
|
#define THINGSPEAK_MIN_INTERVAL 15000 // Minimum interval between POSTs (in millis)
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// SCHEDULER
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef SCHEDULER_SUPPORT
|
|
#define SCHEDULER_SUPPORT 1 // Enable scheduler (1.77Kb)
|
|
#endif
|
|
|
|
#ifndef SCHEDULER_MAX_SCHEDULES
|
|
#define SCHEDULER_MAX_SCHEDULES 10 // Max schedules alowed
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// NTP
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef NTP_SUPPORT
|
|
#define NTP_SUPPORT 1 // Build with NTP support by default (6.78Kb)
|
|
#endif
|
|
|
|
#ifndef NTP_SERVER
|
|
#define NTP_SERVER "pool.ntp.org" // Default NTP server
|
|
#endif
|
|
|
|
#ifndef NTP_TIMEOUT
|
|
#define NTP_TIMEOUT 1000 // Set NTP request timeout to 2 seconds (issue #452)
|
|
#endif
|
|
|
|
#ifndef NTP_TIME_OFFSET
|
|
#define NTP_TIME_OFFSET 60 // Default timezone offset (GMT+1)
|
|
#endif
|
|
|
|
#ifndef NTP_DAY_LIGHT
|
|
#define NTP_DAY_LIGHT 1 // Enable daylight time saving by default
|
|
#endif
|
|
|
|
#ifndef NTP_SYNC_INTERVAL
|
|
#define NTP_SYNC_INTERVAL 60 // NTP initial check every minute
|
|
#endif
|
|
|
|
#ifndef NTP_UPDATE_INTERVAL
|
|
#define NTP_UPDATE_INTERVAL 1800 // NTP check every 30 minutes
|
|
#endif
|
|
|
|
#ifndef NTP_START_DELAY
|
|
#define NTP_START_DELAY 1000 // Delay NTP start 1 second
|
|
#endif
|
|
|
|
#ifndef NTP_DST_REGION
|
|
#define NTP_DST_REGION 0 // 0 for Europe, 1 for USA (defined in NtpClientLib)
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// ALEXA
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// This setting defines whether Alexa support should be built into the firmware
|
|
#ifndef ALEXA_SUPPORT
|
|
#define ALEXA_SUPPORT 1 // Enable Alexa support by default (10.84Kb)
|
|
#endif
|
|
|
|
// This is default value for the alexaEnabled setting that defines whether
|
|
// this device should be discoberable and respond to Alexa commands.
|
|
// Both ALEXA_SUPPORT and alexaEnabled should be 1 for Alexa support to work.
|
|
#ifndef ALEXA_ENABLED
|
|
#define ALEXA_ENABLED 1
|
|
#endif
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// RFBRIDGE
|
|
// This module is not compatible with RF_SUPPORT=1
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef RF_SEND_TIMES
|
|
#define RF_SEND_TIMES 4 // How many times to send the message
|
|
#endif
|
|
|
|
#ifndef RF_SEND_DELAY
|
|
#define RF_SEND_DELAY 500 // Interval between sendings in ms
|
|
#endif
|
|
|
|
#ifndef RF_RECEIVE_DELAY
|
|
#define RF_RECEIVE_DELAY 500 // Interval between recieving in ms (avoid debouncing)
|
|
#endif
|
|
|
|
|
|
#ifndef RF_RAW_SUPPORT
|
|
#define RF_RAW_SUPPORT 0 // RF raw codes require a specific firmware for the EFM8BB1
|
|
// https://github.com/rhx/RF-Bridge-EFM8BB1
|
|
#endif
|
|
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// IR
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#ifndef IR_SUPPORT
|
|
#define IR_SUPPORT 0 // Do not build with IR support by default (10.25Kb)
|
|
#endif
|
|
|
|
#ifndef IR_PIN
|
|
#define IR_PIN 4 // IR LED
|
|
#endif
|
|
|
|
// 24 Buttons Set of the IR Remote
|
|
#ifndef IR_BUTTON_SET
|
|
#define IR_BUTTON_SET 1 // IR button set to use (see below)
|
|
#endif
|
|
|
|
//Remote Buttons SET 1 (for the original Remote shipped with the controller)
|
|
#if IR_SUPPORT
|
|
#if IR_BUTTON_SET == 1
|
|
|
|
/*
|
|
+------+------+------+------+
|
|
| UP | Down | OFF | ON |
|
|
+------+------+------+------+
|
|
| R | G | B | W |
|
|
+------+------+------+------+
|
|
| 1 | 2 | 3 |FLASH |
|
|
+------+------+------+------+
|
|
| 4 | 5 | 6 |STROBE|
|
|
+------+------+------+------+
|
|
| 7 | 8 | 9 | FADE |
|
|
+------+------+------+------+
|
|
| 10 | 11 | 12 |SMOOTH|
|
|
+------+------+------+------+
|
|
*/
|
|
|
|
#define IR_BUTTON_COUNT 24
|
|
|
|
const uint32_t IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = {
|
|
|
|
{ 0xFF906F, IR_BUTTON_MODE_BRIGHTER, 1 },
|
|
{ 0xFFB847, IR_BUTTON_MODE_BRIGHTER, 0 },
|
|
{ 0xFFF807, IR_BUTTON_MODE_STATE, 0 },
|
|
{ 0xFFB04F, IR_BUTTON_MODE_STATE, 1 },
|
|
|
|
{ 0xFF9867, IR_BUTTON_MODE_RGB, 0xFF0000 },
|
|
{ 0xFFD827, IR_BUTTON_MODE_RGB, 0x00FF00 },
|
|
{ 0xFF8877, IR_BUTTON_MODE_RGB, 0x0000FF },
|
|
{ 0xFFA857, IR_BUTTON_MODE_RGB, 0xFFFFFF },
|
|
|
|
{ 0xFFE817, IR_BUTTON_MODE_RGB, 0xD13A01 },
|
|
{ 0xFF48B7, IR_BUTTON_MODE_RGB, 0x00E644 },
|
|
{ 0xFF6897, IR_BUTTON_MODE_RGB, 0x0040A7 },
|
|
{ 0xFFB24D, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FLASH },
|
|
|
|
{ 0xFF02FD, IR_BUTTON_MODE_RGB, 0xE96F2A },
|
|
{ 0xFF32CD, IR_BUTTON_MODE_RGB, 0x00BEBF },
|
|
{ 0xFF20DF, IR_BUTTON_MODE_RGB, 0x56406F },
|
|
{ 0xFF00FF, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_STROBE },
|
|
|
|
{ 0xFF50AF, IR_BUTTON_MODE_RGB, 0xEE9819 },
|
|
{ 0xFF7887, IR_BUTTON_MODE_RGB, 0x00799A },
|
|
{ 0xFF708F, IR_BUTTON_MODE_RGB, 0x944E80 },
|
|
{ 0xFF58A7, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FADE },
|
|
|
|
{ 0xFF38C7, IR_BUTTON_MODE_RGB, 0xFFFF00 },
|
|
{ 0xFF28D7, IR_BUTTON_MODE_RGB, 0x0060A1 },
|
|
{ 0xFFF00F, IR_BUTTON_MODE_RGB, 0xEF45AD },
|
|
{ 0xFF30CF, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_SMOOTH }
|
|
|
|
};
|
|
|
|
#endif
|
|
|
|
//Remote Buttons SET 2 (another identical IR Remote shipped with another controller)
|
|
#if IR_BUTTON_SET == 2
|
|
|
|
/*
|
|
+------+------+------+------+
|
|
| UP | Down | OFF | ON |
|
|
+------+------+------+------+
|
|
| R | G | B | W |
|
|
+------+------+------+------+
|
|
| 1 | 2 | 3 |FLASH |
|
|
+------+------+------+------+
|
|
| 4 | 5 | 6 |STROBE|
|
|
+------+------+------+------+
|
|
| 7 | 8 | 9 | FADE |
|
|
+------+------+------+------+
|
|
| 10 | 11 | 12 |SMOOTH|
|
|
+------+------+------+------+
|
|
*/
|
|
|
|
#define IR_BUTTON_COUNT 24
|
|
|
|
const unsigned long IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = {
|
|
|
|
{ 0xFF00FF, IR_BUTTON_MODE_BRIGHTER, 1 },
|
|
{ 0xFF807F, IR_BUTTON_MODE_BRIGHTER, 0 },
|
|
{ 0xFF40BF, IR_BUTTON_MODE_STATE, 0 },
|
|
{ 0xFFC03F, IR_BUTTON_MODE_STATE, 1 },
|
|
|
|
{ 0xFF20DF, IR_BUTTON_MODE_RGB, 0xFF0000 },
|
|
{ 0xFFA05F, IR_BUTTON_MODE_RGB, 0x00FF00 },
|
|
{ 0xFF609F, IR_BUTTON_MODE_RGB, 0x0000FF },
|
|
{ 0xFFE01F, IR_BUTTON_MODE_RGB, 0xFFFFFF },
|
|
|
|
{ 0xFF10EF, IR_BUTTON_MODE_RGB, 0xD13A01 },
|
|
{ 0xFF906F, IR_BUTTON_MODE_RGB, 0x00E644 },
|
|
{ 0xFF50AF, IR_BUTTON_MODE_RGB, 0x0040A7 },
|
|
{ 0xFFD02F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FLASH },
|
|
|
|
{ 0xFF30CF, IR_BUTTON_MODE_RGB, 0xE96F2A },
|
|
{ 0xFFB04F, IR_BUTTON_MODE_RGB, 0x00BEBF },
|
|
{ 0xFF708F, IR_BUTTON_MODE_RGB, 0x56406F },
|
|
{ 0xFFF00F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_STROBE },
|
|
|
|
{ 0xFF08F7, IR_BUTTON_MODE_RGB, 0xEE9819 },
|
|
{ 0xFF8877, IR_BUTTON_MODE_RGB, 0x00799A },
|
|
{ 0xFF48B7, IR_BUTTON_MODE_RGB, 0x944E80 },
|
|
{ 0xFFC837, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FADE },
|
|
|
|
{ 0xFF28D7, IR_BUTTON_MODE_RGB, 0xFFFF00 },
|
|
{ 0xFFA857, IR_BUTTON_MODE_RGB, 0x0060A1 },
|
|
{ 0xFF6897, IR_BUTTON_MODE_RGB, 0xEF45AD },
|
|
{ 0xFFE817, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_SMOOTH }
|
|
|
|
};
|
|
|
|
#endif
|
|
|
|
//Remote Buttons SET 3 (samsung AA59-00608A 8 Toggle Buttons for generic 8CH module)
|
|
#if IR_BUTTON_SET == 3
|
|
/*
|
|
+------+------+------+
|
|
| 1 | 2 | 3 |
|
|
+------+------+------+
|
|
| 4 | 5 | 6 |
|
|
+------+------+------+
|
|
| 7 | 8 | 9 |
|
|
+------+------+------+
|
|
| | 0 | |
|
|
+------+------+------+
|
|
*/
|
|
#define IR_BUTTON_COUNT 10
|
|
|
|
const unsigned long IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = {
|
|
|
|
{ 0xE0E020DF, IR_BUTTON_MODE_TOGGLE, 0 }, // Toggle Relay #0
|
|
{ 0xE0E0A05F, IR_BUTTON_MODE_TOGGLE, 1 }, // Toggle Relay #1
|
|
{ 0xE0E0609F, IR_BUTTON_MODE_TOGGLE, 2 }, // Toggle Relay #2
|
|
|
|
{ 0xE0E010EF, IR_BUTTON_MODE_TOGGLE, 3 }, // Toggle Relay #3
|
|
{ 0xE0E0906F, IR_BUTTON_MODE_TOGGLE, 4 }, // Toggle Relay #4
|
|
{ 0xE0E050AF, IR_BUTTON_MODE_TOGGLE, 5 }, // Toggle Relay #5
|
|
|
|
{ 0xE0E030CF, IR_BUTTON_MODE_TOGGLE, 6 }, // Toggle Relay #6
|
|
{ 0xE0E0B04F, IR_BUTTON_MODE_TOGGLE, 7 } // Toggle Relay #7
|
|
//{ 0xE0E0708F, IR_BUTTON_MODE_TOGGLE, 8 } //Extra Button
|
|
|
|
//{ 0xE0E08877, IR_BUTTON_MODE_TOGGLE, 9 } //Extra Button
|
|
};
|
|
#endif
|
|
#endif // IR_SUPPORT
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// Custom RF module
|
|
// Check http://tinkerman.cat/adding-rf-to-a-non-rf-itead-sonoff/
|
|
// Enable support by passing RF_SUPPORT=1 build flag
|
|
// This module is not compatible with RFBRIDGE or SONOFF RF
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef RF_SUPPORT
|
|
#define RF_SUPPORT 0
|
|
#endif
|
|
|
|
#ifndef RF_PIN
|
|
#define RF_PIN 14
|
|
#endif
|
|
|
|
#define RF_DEBOUNCE 500
|
|
#define RF_LEARN_TIMEOUT 60000
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// Custom RFM69 to MQTT bridge
|
|
// Check http://tinkerman.cat/rfm69-wifi-gateway/
|
|
// Enable support by passing RFM69_SUPPORT=1 build flag
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef RFM69_SUPPORT
|
|
#define RFM69_SUPPORT 0
|
|
#endif
|
|
|
|
#ifndef RFM69_MAX_TOPICS
|
|
#define RFM69_MAX_TOPICS 50
|
|
#endif
|
|
|
|
#ifndef RFM69_DEFAULT_TOPIC
|
|
#define RFM69_DEFAULT_TOPIC "/rfm69gw/{node}/{key}"
|
|
#endif
|
|
|
|
#ifndef RFM69_NODE_ID
|
|
#define RFM69_NODE_ID 2
|
|
#endif
|
|
|
|
#ifndef RFM69_GATEWAY_ID
|
|
#define RFM69_GATEWAY_ID 2
|
|
#endif
|
|
|
|
#ifndef RFM69_NETWORK_ID
|
|
#define RFM69_NETWORK_ID 164
|
|
#endif
|
|
|
|
#ifndef RFM69_PROMISCUOUS
|
|
#define RFM69_PROMISCUOUS 1
|
|
#endif
|
|
|
|
#ifndef RFM69_PROMISCUOUS_SENDS
|
|
#define RFM69_PROMISCUOUS_SENDS 0
|
|
#endif
|
|
|
|
#ifndef RFM69_FREQUENCY
|
|
#define RFM69_FREQUENCY RF69_868MHZ
|
|
#endif
|
|
|
|
#ifndef RFM69_ENCRYPTKEY
|
|
#define RFM69_ENCRYPTKEY "fibonacci0123456"
|
|
#endif
|
|
|
|
#ifndef RFM69_CS_PIN
|
|
#define RFM69_CS_PIN SS
|
|
#endif
|
|
|
|
#ifndef RFM69_IRQ_PIN
|
|
#define RFM69_IRQ_PIN 5
|
|
#endif
|
|
|
|
#ifndef RFM69_RESET_PIN
|
|
#define RFM69_RESET_PIN 7
|
|
#endif
|
|
|
|
#ifndef RFM69_IS_RFM69HW
|
|
#define RFM69_IS_RFM69HW 0
|
|
#endif
|