mh
/
mhsw-espurna


								//--------------------------------------------------------------------------------

								// Custom RF module

								// Check http://tinkerman.cat/adding-rf-to-a-non-rf-itead-sonoff/

								// Enable support by passing RF_SUPPORT=1 build flag

								//--------------------------------------------------------------------------------


								#define RF_PIN                  14

								#define RF_CHANNEL              31

								#define RF_DEVICE               1


								//--------------------------------------------------------------------------------

								// DHTXX temperature/humidity sensor

								// Enable support by passing DHT_SUPPORT=1 build flag

								//--------------------------------------------------------------------------------


								#define DHT_PIN                 14

								#define DHT_UPDATE_INTERVAL     60000

								#define DHT_TYPE                DHT22

								#define DHT_TIMING              11

								#define DHT_TEMPERATURE_TOPIC   "temperature"

								#define DHT_HUMIDITY_TOPIC      "humidity"


								#define HUMIDITY_NORMAL         0

								#define HUMIDITY_COMFORTABLE    1

								#define HUMIDITY_DRY            2

								#define HUMIDITY_WET            3


								//--------------------------------------------------------------------------------

								// Analog sensor

								// Enable support by passing ANALOG_SUPPORT=1 build flag

								//--------------------------------------------------------------------------------


								#define ANALOG_PIN              0

								#define ANALOG_UPDATE_INTERVAL  60000

								#define ANALOG_TOPIC            "analog"


								#if ANALOG_SUPPORT

								    #undef ENABLE_ADC_VCC

								    #define ENABLE_ADC_VCC      0

								#endif


								//--------------------------------------------------------------------------------

								// DS18B20 temperature sensor

								// Enable support by passing DS18B20_SUPPORT=1 build flag

								//--------------------------------------------------------------------------------


								#define DS_PIN                  14

								#define DS_UPDATE_INTERVAL      60000

								#define DS_TEMPERATURE_TOPIC    "temperature"


								//--------------------------------------------------------------------------------

								// Custom current sensor

								// Check http://tinkerman.cat/your-laundry-is-done/

								// Check http://tinkerman.cat/power-monitoring-sonoff-th-adc121/

								// Enable support by passing EMON_SUPPORT=1 build flag

								//--------------------------------------------------------------------------------


								#define EMON_ANALOG_PROVIDER    0

								#define EMON_ADC121_PROVIDER    1


								// If you select EMON_ADC121_PROVIDER you need to enable and configure I2C in general.h

								#define EMON_PROVIDER           EMON_ANALOG_PROVIDER


								#if EMON_PROVIDER == EMON_ANALOG_PROVIDER

								    #define EMON_CURRENT_PIN        0

									#define EMON_ADC_BITS           10

									#define EMON_REFERENCE_VOLTAGE  1.0

								    #define EMON_CURRENT_PRECISION  1

								    #define EMON_CURRENT_OFFSET     0.25

								    #if EMON_SUPPORT

								        #undef ENABLE_ADC_VCC

										#define ENABLE_ADC_VCC      0

								    #endif

								#endif


								#if EMON_PROVIDER == EMON_ADC121_PROVIDER

								    #define EMON_ADC121_ADDRESS     0x50

									#define EMON_ADC_BITS           12

									#define EMON_REFERENCE_VOLTAGE  3.3

								    #define EMON_CURRENT_PRECISION  2

								    #define EMON_CURRENT_OFFSET     0.10

								#endif


								#define EMON_CURRENT_RATIO      30

								#define EMON_SAMPLES            1000

								#define EMON_INTERVAL           10000

								#define EMON_MEASUREMENTS       6

								#define EMON_MAINS_VOLTAGE      230

								#define EMON_APOWER_TOPIC       "apower"

								#define EMON_ENERGY_TOPIC       "energy"

								#define EMON_CURRENT_TOPIC      "current"


								//--------------------------------------------------------------------------------

								// HLW8012 power sensor (Sonoff POW, Espurna H)

								// Enable support by passing HLW8012_SUPPORT=1 build flag

								//--------------------------------------------------------------------------------


								// GPIOs defined in the hardware.h file


								#define HLW8012_USE_INTERRUPTS  1

								#define HLW8012_SEL_CURRENT     HIGH

								#define HLW8012_CURRENT_R       0.001

								#define HLW8012_VOLTAGE_R_UP    ( 5 * 470000 ) // Real: 2280k

								#define HLW8012_VOLTAGE_R_DOWN  ( 1000 ) // Real 1.009k

								#define HLW8012_POWER_TOPIC     "power"

								#define HLW8012_CURRENT_TOPIC   "current"

								#define HLW8012_VOLTAGE_TOPIC   "voltage"

								#define HLW8012_APOWER_TOPIC    "apower"

								#define HLW8012_RPOWER_TOPIC    "rpower"

								#define HLW8012_PFACTOR_TOPIC   "pfactor"

								#define HLW8012_ENERGY_TOPIC    "energy"

								#define HLW8012_UPDATE_INTERVAL 5000

								#define HLW8012_REPORT_EVERY    12

								#define HLW8012_MIN_POWER       5

								#define HLW8012_MAX_POWER       2500

								#define HLW8012_MIN_CURRENT     0.05

								#define HLW8012_MAX_CURRENT     10


								//--------------------------------------------------------------------------------

								// Internal power montior

								// Enable support by passing ENABLE_ADC_VCC=1 build flag

								// Do not enable this if using the analog GPIO for any other thing

								//--------------------------------------------------------------------------------


								#ifndef ENABLE_ADC_VCC

								#define ENABLE_ADC_VCC       1

								#endif


								#if ENABLE_ADC_VCC

								    ADC_MODE(ADC_VCC);

								#endif