Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

244 lines
6.9 KiB

// -----------------------------------------------------------------------------
// DHTXX Sensor
// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
// -----------------------------------------------------------------------------
#if SENSOR_SUPPORT && DHT_SUPPORT
#pragma once
#include "Arduino.h"
#include "BaseSensor.h"
#define DHT_MAX_DATA 5
#define DHT_MAX_ERRORS 5
#define DHT_MIN_INTERVAL 2000
#define DHT_CHIP_DHT11 11
#define DHT_CHIP_DHT22 22
#define DHT_CHIP_DHT21 21
#define DHT_CHIP_AM2301 21
class DHTSensor : public BaseSensor {
public:
// ---------------------------------------------------------------------
// Public
// ---------------------------------------------------------------------
DHTSensor(): BaseSensor() {
_count = 2;
_sensor_id = SENSOR_DHTXX_ID;
}
~DHTSensor() {
if (_previous != GPIO_NONE) gpioReleaseLock(_previous);
}
// ---------------------------------------------------------------------
void setGPIO(unsigned char gpio) {
_gpio = gpio;
}
void setType(unsigned char type) {
_type = type;
}
// ---------------------------------------------------------------------
unsigned char getGPIO() {
return _gpio;
}
unsigned char getType() {
return _type;
}
// ---------------------------------------------------------------------
// Sensor API
// ---------------------------------------------------------------------
// Initialization method, must be idempotent
void begin() {
_count = 0;
// Manage GPIO lock
if (_previous != GPIO_NONE) gpioReleaseLock(_previous);
_previous = GPIO_NONE;
if (!gpioGetLock(_gpio)) {
_error = SENSOR_ERROR_GPIO_USED;
return;
}
_previous = _gpio;
_count = 2;
}
// Pre-read hook (usually to populate registers with up-to-date data)
void pre() {
_error = SENSOR_ERROR_OK;
_read();
}
// Descriptive name of the sensor
String description() {
char buffer[20];
snprintf(buffer, sizeof(buffer), "DHT%d @ GPIO%d", _type, _gpio);
return String(buffer);
}
// Descriptive name of the slot # index
String slot(unsigned char index) {
return description();
};
// Address of the sensor (it could be the GPIO or I2C address)
String address(unsigned char index) {
return String(_gpio);
}
// Type for slot # index
unsigned char type(unsigned char index) {
if (index == 0) return MAGNITUDE_TEMPERATURE;
if (index == 1) return MAGNITUDE_HUMIDITY;
return MAGNITUDE_NONE;
}
// Current value for slot # index
double value(unsigned char index) {
if (index == 0) return _temperature;
if (index == 1) return _humidity;
return 0;
}
protected:
// ---------------------------------------------------------------------
// Protected
// ---------------------------------------------------------------------
void _read() {
if ((_last_ok > 0) && (millis() - _last_ok < DHT_MIN_INTERVAL)) {
_error = SENSOR_ERROR_OK;
return;
}
unsigned long low = 0;
unsigned long high = 0;
unsigned char dhtData[DHT_MAX_DATA] = {0};
unsigned char byteInx = 0;
unsigned char bitInx = 7;
// Send start signal to DHT sensor
if (++_errors > DHT_MAX_ERRORS) {
_errors = 0;
digitalWrite(_gpio, HIGH);
delay(250);
}
pinMode(_gpio, OUTPUT);
noInterrupts();
digitalWrite(_gpio, LOW);
if (_type == DHT_CHIP_DHT11) {
delay(20);
} else {
delayMicroseconds(500);
}
digitalWrite(_gpio, HIGH);
delayMicroseconds(40);
pinMode(_gpio, INPUT_PULLUP);
delayMicroseconds(10);
// No errors, read the 40 data bits
for( int k = 0; k < 41; k++ ) {
// Starts new data transmission with >50us low signal
low = _signal(100, LOW);
if (low == 0) {
_error = SENSOR_ERROR_TIMEOUT;
return;
}
// Check to see if after >70us rx data is a 0 or a 1
high = _signal(100, HIGH);
if (high == 0) {
_error = SENSOR_ERROR_TIMEOUT;
return;
}
// Skip the first bit
if (k == 0) continue;
// add the current read to the output data
// since all dhtData array where set to 0 at the start,
// only look for "1" (>28us us)
if (high > low) dhtData[byteInx] |= (1 << bitInx);
// index to next byte
if (bitInx == 0) {
bitInx = 7;
++byteInx;
} else {
--bitInx;
}
}
interrupts();
// Verify checksum
if (dhtData[4] != ((dhtData[0] + dhtData[1] + dhtData[2] + dhtData[3]) & 0xFF)) {
_error = SENSOR_ERROR_CRC;
return;
}
// Get humidity from Data[0] and Data[1]
if (_type == DHT_CHIP_DHT11) {
_humidity = dhtData[0];
} else {
_humidity = dhtData[0] * 256 + dhtData[1];
_humidity /= 10;
}
// Get temp from Data[2] and Data[3]
if (_type == DHT_CHIP_DHT11) {
_temperature = dhtData[2];
} else {
_temperature = (dhtData[2] & 0x7F) * 256 + dhtData[3];
_temperature /= 10;
if (dhtData[2] & 0x80) _temperature *= -1;
}
_last_ok = millis();
_errors = 0;
_error = SENSOR_ERROR_OK;
}
unsigned long _signal(int usTimeOut, bool state) {
unsigned long uSec = 1;
while (digitalRead(_gpio) == state) {
if (++uSec > usTimeOut) return 0;
delayMicroseconds(1);
}
return uSec;
}
unsigned char _gpio = GPIO_NONE;
unsigned char _previous = GPIO_NONE;
unsigned char _type = DHT_CHIP_DHT22;
unsigned long _last_ok = 0;
unsigned char _errors = 0;
double _temperature = 0;
unsigned int _humidity = 0;
};
#endif // SENSOR_SUPPORT && DHT_SUPPORT