/*
|
|
|
|
DEVICED MODULE
|
|
|
|
Copyright (C) 2018 by Xose Pérez <xose dot perez at gmail dot com>
|
|
|
|
*/
|
|
|
|
// Configuration settings for each device, the most common ones are:
|
|
//
|
|
// board: ID of the board according to *devices* enum in hardware.h
|
|
// device: Name of the device ("string")
|
|
// btnGPIO <n>: GPIO for the n-th button (0-based)
|
|
// btnRelay <n>: Relay index linked to the n-th button
|
|
// btnMode <n>: Mode for the n-th button, can be a sum of:
|
|
// - BUTTON_PUSHBUTTON: button event is fired when released
|
|
// - BUTTON_SWITCH: button event is fired when pressed or released
|
|
// - BUTTON_DEFAULT_HIGH: there is a pull up in place
|
|
// - BUTTON_SET_PULLUP: set pullup by software
|
|
// rlyGPIO <n>: GPIO for the n-th relay (0-based)
|
|
// rlyType <n>: Type of the n-th relaym can be on of:
|
|
// - RELAY_TYPE_NORMAL
|
|
// - RELAY_TYPE_INVERSE
|
|
// - RELAY_TYPE_LATCHED
|
|
// - RELAY_TYPE_LATCHED_INVERSE
|
|
// ledGPIO <n>: GPIO for the n-th LED (0-based)
|
|
// ledLogic <n>: GPIO_LOGIC_DIRECT or GPIO_LOGIC_INVERSE
|
|
// ledMode <n>: Mode for the n-th LED, check types.h for LED_MODE_%
|
|
// ledRelay <n>: Relay linked to the n-th LED
|
|
//
|
|
// Besides, other hardware specific information can be added to any device
|
|
|
|
void _deviceLoad() {
|
|
|
|
// Do not load defaults if custom board
|
|
if (getSetting("board", DEVICE_UNKNOWN).toInt() == DEVICE_CUSTOM) return;
|
|
|
|
// -------------------------------------------------------------------------
|
|
// Board definitions
|
|
// -------------------------------------------------------------------------
|
|
|
|
#if defined(NODEMCU_LOLIN)
|
|
|
|
setSetting("board", DEVICE_NODEMCU_LOLIN);
|
|
setSetting("device", "NODEMCU_LOLIN");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(WEMOS_D1_MINI_RELAYSHIELD)
|
|
|
|
setSetting("board", DEVICE_WEMOS_D1_MINI_RELAYSHIELD);
|
|
setSetting("device", "WEMOS_D1_MINI_RELAYSHIELD");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 5);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_BASIC)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_BASIC);
|
|
setSetting("device", "ITEAD_SONOFF_BASIC");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_TH)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_TH);
|
|
setSetting("device", "ITEAD_SONOFF_TH");
|
|
setSetting("fw", ESPURNA_SENSOR);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
// Jack is connected to GPIO14 (and with a small hack to GPIO4)
|
|
setSetting("dhtEnabled", 1);
|
|
setSetting("dhtGPIO", 0, 14);
|
|
|
|
setSetting("dsEnabled", 1);
|
|
setSetting("dsGPIO", 0, 14);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_SV)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_SV);
|
|
setSetting("device", "ITEAD_SONOFF_SV");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_TOUCH)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_TOUCH);
|
|
setSetting("device", "ITEAD_SONOFF_TOUCH");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_POW)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_POW);
|
|
setSetting("device", "ITEAD_SONOFF_POW");
|
|
setSetting("fw", ESPURNA_HLW8012);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 15);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("hlwEnabled", 1);
|
|
setSetting("hlwSELGPIO", 5);
|
|
setSetting("hlwCF1GPIO", 13);
|
|
setSetting("hlwCFGPIO", 14);
|
|
|
|
#elif defined(ITEAD_SONOFF_DUAL)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_DUAL);
|
|
setSetting("device", "ITEAD_SONOFF_DUAL");
|
|
setSetting("fw", ESPURNA_SONOFF_DUAL);
|
|
|
|
setSetting("btnRelay", 0, GPIO_NONE);
|
|
setSetting("btnRelay", 1, GPIO_NONE);
|
|
setSetting("btnRelay", 2, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_DUAL);
|
|
setSetting("rlyDummy", 2);
|
|
|
|
setSetting("dbgSerial", 0);
|
|
setSetting("dbgSpeed", 19230);
|
|
|
|
#elif defined(ITEAD_1CH_INCHING)
|
|
|
|
// The inching functionality is managed by a misterious IC in the board.
|
|
// You cannot control the inching button and functionality from the ESP8266
|
|
// Besides, enabling the inching functionality using the hardware button
|
|
// will result in the relay switching on and off continuously.
|
|
// Fortunately the unkown IC keeps memory of the hardware inching status
|
|
// so you can just disable it and forget. The inching LED must be lit.
|
|
// You can still use the pulse options from the web interface
|
|
// without problem.
|
|
|
|
setSetting("board", DEVICE_ITEAD_1CH_INCHING);
|
|
setSetting("device", "ITEAD_1CH_INCHING");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_4CH)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_4CH);
|
|
setSetting("device", "ITEAD_SONOFF_4CH");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnGPIO", 1, 9);
|
|
setSetting("btnGPIO", 2, 10);
|
|
setSetting("btnGPIO", 3, 14);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 3, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
setSetting("btnRelay", 2, 2);
|
|
setSetting("btnRelay", 3, 3);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyGPIO", 1, 5);
|
|
setSetting("rlyGPIO", 2, 4);
|
|
setSetting("rlyGPIO", 3, 15);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SLAMPHER)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SLAMPHER);
|
|
setSetting("device", "ITEAD_SLAMPHER");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_S20)
|
|
|
|
setSetting("board", DEVICE_ITEAD_S20);
|
|
setSetting("device", "ITEAD_S20");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ELECTRODRAGON_WIFI_IOT)
|
|
|
|
setSetting("board", DEVICE_ELECTRODRAGON_WIFI_IOT);
|
|
setSetting("device", "ELECTRODRAGON_WIFI_IOT");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnGPIO", 1, 2);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
|
|
setSetting("ledGPIO", 0, 16);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyGPIO", 1, 13);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(WORKCHOICE_ECOPLUG)
|
|
|
|
setSetting("board", DEVICE_WORKCHOICE_ECOPLUG);
|
|
setSetting("device", "WORKCHOICE_ECOPLUG");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 15);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(JANGOE_WIFI_RELAY_NC)
|
|
|
|
// Jan Goedeke Wifi Relay
|
|
// https://github.com/JanGoe/esp8266-wifi-relay
|
|
|
|
setSetting("board", DEVICE_JANGOE_WIFI_RELAY_NC);
|
|
setSetting("device", "JANGOE_WIFI_RELAY_NC");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 12);
|
|
setSetting("btnGPIO", 1, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
|
|
setSetting("rlyGPIO", 0, 2);
|
|
setSetting("rlyGPIO", 1, 14);
|
|
setSetting("rlyType", 0, RELAY_TYPE_INVERSE);
|
|
setSetting("rlyType", 1, RELAY_TYPE_INVERSE);
|
|
|
|
#elif defined(JANGOE_WIFI_RELAY_NO)
|
|
|
|
setSetting("board", DEVICE_JANGOE_WIFI_RELAY_NO);
|
|
setSetting("device", "JANGOE_WIFI_RELAY_NO");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 12);
|
|
setSetting("btnGPIO", 1, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
|
|
setSetting("rlyGPIO", 0, 2);
|
|
setSetting("rlyGPIO", 1, 14);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(OPENENERGYMONITOR_MQTT_RELAY)
|
|
|
|
setSetting("board", DEVICE_OPENENERGYMONITOR_MQTT_RELAY);
|
|
setSetting("device", "OPENENERGYMONITOR_MQTT_RELAY");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 16);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(JORGEGARCIA_WIFI_RELAYS)
|
|
|
|
// Jorge García Wifi+Relays Board Kit
|
|
// https://www.tindie.com/products/jorgegarciadev/wifi--relays-board-kit
|
|
// https://github.com/jorgegarciadev/wifikit
|
|
|
|
setSetting("board", DEVICE_JORGEGARCIA_WIFI_RELAYS);
|
|
setSetting("device", "JORGEGARCIA_WIFI_RELAYS");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("rlyGPIO", 0, 0);
|
|
setSetting("rlyGPIO", 1, 2);
|
|
setSetting("rlyType", 0, RELAY_TYPE_INVERSE);
|
|
setSetting("rlyType", 1, RELAY_TYPE_INVERSE);
|
|
|
|
#elif defined(AITHINKER_AI_LIGHT)
|
|
|
|
setSetting("board", DEVICE_AITHINKER_AI_LIGHT);
|
|
setSetting("device", "AITHINKER_AI_LIGHT");
|
|
setSetting("fw", ESPURNA_MY92XX);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("myModel", 0); // 4 channels per chip
|
|
setSetting("myChips", 1);
|
|
setSetting("myDIGPIO", 13);
|
|
setSetting("myDCKIGPIO", 15);
|
|
setSetting("myMapping", "0123");
|
|
|
|
#elif defined(MAGICHOME_LED_CONTROLLER)
|
|
|
|
setSetting("board", DEVICE_MAGICHOME_LED_CONTROLLER);
|
|
setSetting("device", "MAGICHOME_LED_CONTROLLER");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("irEnabled", 1);
|
|
setSetting("irGPIO", 4);
|
|
setSetting("irSet", 1);
|
|
|
|
setSetting("litChGPIO", 0, 14);
|
|
setSetting("litChGPIO", 1, 5);
|
|
setSetting("litChGPIO", 2, 12);
|
|
setSetting("litChGPIO", 3, 13);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(ITEAD_MOTOR)
|
|
|
|
setSetting("board", DEVICE_ITEAD_MOTOR);
|
|
setSetting("device", "ITEAD_MOTOR");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(TINKERMAN_ESPURNA_H06)
|
|
|
|
setSetting("board", DEVICE_TINKERMAN_ESPURNA_H06);
|
|
setSetting("device", "TINKERMAN_ESPURNA_H06");
|
|
setSetting("fw", ESPURNA_HLW8012);
|
|
|
|
setSetting("btnGPIO", 0, 4);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 5);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_INVERSE);
|
|
|
|
setSetting("hlwEnabled", 1);
|
|
setSetting("hlwSELGPIO", 2);
|
|
setSetting("hlwCF1GPIO", 13);
|
|
setSetting("hlwCFGPIO", 14);
|
|
|
|
#elif defined(HUACANXING_H801)
|
|
|
|
setSetting("board", DEVICE_HUACANXING_H801);
|
|
setSetting("device", "HUACANXING_H801");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("ledGPIO", 0, 5);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("dbgPort", 1);
|
|
|
|
setSetting("litChGPIO", 0, 15);
|
|
setSetting("litChGPIO", 1, 13);
|
|
setSetting("litChGPIO", 2, 12);
|
|
setSetting("litChGPIO", 3, 14);
|
|
setSetting("litChGPIO", 4, 4);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 4, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(ITEAD_BNSZ01)
|
|
|
|
setSetting("board", DEVICE_ITEAD_BNSZ01);
|
|
setSetting("device", "ITEAD_BNSZ01");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("litChGPIO", 0, 12);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(ITEAD_SONOFF_RFBRIDGE)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_RFBRIDGE);
|
|
setSetting("device", "ITEAD_SONOFF_RFBRIDGE");
|
|
setSetting("fw", ESPURNA_SONOFF_RFBRIDGE);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_RFBRIDGE);
|
|
setSetting("rlyDummy", 8);
|
|
|
|
// When using un-modified harware, ESPurna communicates with the secondary
|
|
// MCU EFM8BB1 via UART at 19200 bps so we need to change the speed of
|
|
// the port and remove UART noise on serial line
|
|
setSetting("dbgSerial", 0);
|
|
setSetting("dbgSpeed", 19200);
|
|
|
|
setSetting("rfbDirect", 0);
|
|
setSetting("rfbRXGPIO", 4);
|
|
setSetting("rfbTXGPIO", 5);
|
|
|
|
#elif defined(ITEAD_SONOFF_4CH_PRO)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_4CH_PRO);
|
|
setSetting("device", "ITEAD_SONOFF_4CH_PRO");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnGPIO", 1, 9);
|
|
setSetting("btnGPIO", 2, 10);
|
|
setSetting("btnGPIO", 3, 14);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 3, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
setSetting("btnRelay", 2, 2);
|
|
setSetting("btnRelay", 3, 3);
|
|
|
|
// Sonoff 4CH Pro uses a secondary STM32 microcontroller to handle
|
|
// buttons and relays, but it also forwards button presses to the ESP8285.
|
|
// This allows ESPurna to handle button presses -almost- the same way
|
|
// as with other devices except:
|
|
// * Double click seems to break/disable the button on the STM32 side
|
|
// * With S6 switch to 1 (self-locking and inching modes) everything's OK
|
|
// * With S6 switch to 0 (interlock mode) if there is a relay ON
|
|
// and you click on another relay button, the STM32 sends a "press"
|
|
// event for the button of the first relay (to turn it OFF) but it
|
|
// does not send a "release" event. It's like it's holding the
|
|
// button down since you can see it is still LOW.
|
|
// Whatever reason the result is that it may actually perform a
|
|
// long click or long-long click.
|
|
// The configuration below make the button toggle the relay on press events
|
|
// and disables any possibly harmful combination with S6 set to 0.
|
|
// If you are sure you will only use S6 to 1 you can comment the
|
|
// btnLngClick(0) and btnLngLngClick(0) options below to recover the
|
|
// reset mode and factory reset functionalities, or link other actions like
|
|
// AP mode in the commented line below.
|
|
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 0, BUTTON_MODE_NONE); // or BUTTON_MODE_AP
|
|
setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE); // or BUTTON_MODE_FACTORY
|
|
setSetting("btnPress", 1, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnClick", 1, BUTTON_MODE_NONE);
|
|
setSetting("btnPress", 2, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnClick", 2, BUTTON_MODE_NONE);
|
|
setSetting("btnPress", 3, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnClick", 3, BUTTON_MODE_NONE);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyGPIO", 1, 5);
|
|
setSetting("rlyGPIO", 2, 4);
|
|
setSetting("rlyGPIO", 3, 15);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_B1)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_B1);
|
|
setSetting("device", "ITEAD_SONOFF_B1");
|
|
setSetting("fw", ESPURNA_MY92XX);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("litChFactor", 4, 0.1); // White LEDs are way more bright in the B1
|
|
setSetting("litChFactor", 5, 0.1); // White LEDs are way more bright in the B1
|
|
|
|
setSetting("myModel", 1); // 3 channels per chip
|
|
setSetting("myChips", 2);
|
|
setSetting("myDIGPIO", 12);
|
|
setSetting("myDCKIGPIO", 14);
|
|
setSetting("myMapping", "43501"); // TODO
|
|
|
|
#elif defined(ITEAD_SONOFF_LED)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_LED);
|
|
setSetting("device", "ITEAD_SONOFF_LED");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("litChGPIO", 0, 12); // Cold white
|
|
setSetting("litChGPIO", 1, 14); // Warm white
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(ITEAD_SONOFF_T1_1CH)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_T1_1CH);
|
|
setSetting("device", "ITEAD_SONOFF_T1_1CH");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_T1_2CH)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_T1_2CH);
|
|
setSetting("device", "ITEAD_SONOFF_T1_2CH");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnGPIO", 1, 9);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
|
|
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnPress", 1, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnClick", 1, BUTTON_MODE_NONE);
|
|
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnDblClick", 1, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 1, BUTTON_MODE_NONE);
|
|
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
|
|
setSetting("btnLngLngClick", 1, BUTTON_MODE_RESET);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyGPIO", 1, 5);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_T1_3CH)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_T1_3CH);
|
|
setSetting("device", "ITEAD_SONOFF_T1_3CH");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnGPIO", 1, 9);
|
|
setSetting("btnGPIO", 2, 10);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
setSetting("btnRelay", 2, 2);
|
|
|
|
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnPress", 1, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnPress", 2, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnClick", 1, BUTTON_MODE_NONE);
|
|
setSetting("btnClick", 2, BUTTON_MODE_NONE);
|
|
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnDblClick", 1, BUTTON_MODE_NONE);
|
|
setSetting("btnDblClick", 2, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 1, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 2, BUTTON_MODE_NONE);
|
|
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
|
|
setSetting("btnLngLngClick", 1, BUTTON_MODE_RESET);
|
|
setSetting("btnLngLngClick", 2, BUTTON_MODE_RESET);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyGPIO", 1, 5);
|
|
setSetting("rlyGPIO", 2, 4);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_RF)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_RF);
|
|
setSetting("device", "ITEAD_SONOFF_RF");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(WION_50055)
|
|
|
|
// WiOn 50055 Indoor Wi-Fi Wall Outlet & Tap
|
|
// https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50050-Indoor-Wi-Fi-Outlet-Wireless-Switch-Programmable-Timer-%2F263112281551
|
|
// https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50055-Indoor-Wi-Fi-Wall-Tap-Monitor-Energy-Usage-Wireless-Smart-Switch-%2F263020837777
|
|
// Does not support power monitoring yet
|
|
|
|
setSetting("board", DEVICE_WION_50055);
|
|
setSetting("device", "WION_50055");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 15);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(EXS_WIFI_RELAY_V31)
|
|
|
|
// EX-Store Wifi Relay v3.1
|
|
// https://ex-store.de/ESP8266-WiFi-Relay-V31
|
|
|
|
setSetting("board", DEVICE_EXS_WIFI_RELAY_V31);
|
|
setSetting("device", "EXS_WIFI_RELAY_V31");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("rlyGPIO", 0, 13);
|
|
setSetting("rlyResetGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_LATCHED);
|
|
|
|
#elif defined(HUACANXING_H802)
|
|
|
|
setSetting("board", DEVICE_HUACANXING_H802);
|
|
setSetting("device", "HUACANXING_H802");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("dbgPort", 1);
|
|
|
|
setSetting("litChGPIO", 0, 12);
|
|
setSetting("litChGPIO", 1, 14);
|
|
setSetting("litChGPIO", 2, 13);
|
|
setSetting("litChGPIO", 3, 15);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(GENERIC_V9261F)
|
|
|
|
setSetting("board", DEVICE_GENERIC_V9261F);
|
|
setSetting("device", "GENERIC_V9261F");
|
|
setSetting("fw", ESPURNA_V9261F);
|
|
|
|
setSetting("v92Enabled", 1);
|
|
setSetting("v92GPIO", 2);
|
|
setSetting("v92Logic", GPIO_LOGIC_INVERSE);
|
|
|
|
#elif defined(GENERIC_ECH1560)
|
|
|
|
setSetting("board", DEVICE_GENERIC_ECH1560);
|
|
setSetting("device", "GENERIC_ECH1560");
|
|
setSetting("fw", ESPURNA_ECH1560);
|
|
|
|
setSetting("echEnabled", 1);
|
|
setSetting("echCLKGPIO", 4);
|
|
setSetting("echMISOGPIO", 5);
|
|
setSetting("echLogic", GPIO_LOGIC_INVERSE);
|
|
|
|
#elif defined(TINKERMAN_ESPURNA_H08)
|
|
|
|
setSetting("board", DEVICE_TINKERMAN_ESPURNA_H08);
|
|
setSetting("device", "TINKERMAN_ESPURNA_H08");
|
|
setSetting("fw", ESPURNA_HLW8012);
|
|
|
|
setSetting("btnGPIO", 0, 4);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("hlwEnabled", 1);
|
|
setSetting("hlwSELGPIO", 5);
|
|
setSetting("hlwCF1GPIO", 13);
|
|
setSetting("hlwCFGPIO", 14);
|
|
|
|
#elif defined(MANCAVEMADE_ESPLIVE)
|
|
|
|
// ESPLive
|
|
// https://github.com/ManCaveMade/ESP-Live
|
|
|
|
setSetting("board", DEVICE_MANCAVEMADE_ESPLIVE);
|
|
setSetting("device", "MANCAVEMADE_ESPLIVE");
|
|
setSetting("fw", ESPURNA_SENSOR);
|
|
|
|
setSetting("btnGPIO", 0, 4);
|
|
setSetting("btnGPIO", 1, 5);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
|
|
// The ESPLive has an ADC MUX which needs to be enabled
|
|
setSetting("ledGPIO", 0, 16);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("ledMode", LED_MODE_ON);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyGPIO", 1, 13);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("dsEnabled", 1);
|
|
setSetting("dsGPIO", 0, 2);
|
|
|
|
setSetting("snsDelta", MAGNITUDE_TEMPERATURE, 1.0); // Temperature min change to report
|
|
|
|
#elif defined(INTERMITTECH_QUINLED)
|
|
|
|
// QuinLED
|
|
// http://blog.quindorian.org/2017/02/esp8266-led-lighting-quinled-v2-6-pcb.html
|
|
|
|
setSetting("board", DEVICE_INTERMITTECH_QUINLED);
|
|
setSetting("device", "INTERMITTECH_QUINLED");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("ledGPIO", 0, 5);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("litChGPIO", 0, 0);
|
|
setSetting("litChGPIO", 1, 2);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(MAGICHOME_LED_CONTROLLER_20)
|
|
|
|
setSetting("board", DEVICE_MAGICHOME_LED_CONTROLLER_20);
|
|
setSetting("device", "MAGICHOME_LED_CONTROLLER_20");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("irEnabled", 1);
|
|
setSetting("irGPIO", 4);
|
|
setSetting("irSet", 1);
|
|
|
|
setSetting("litChGPIO", 0, 5);
|
|
setSetting("litChGPIO", 1, 12);
|
|
setSetting("litChGPIO", 2, 13);
|
|
setSetting("litChGPIO", 3, 15);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(ARILUX_AL_LC06)
|
|
|
|
setSetting("board", DEVICE_ARILUX_AL_LC06);
|
|
setSetting("device", "ARILUX_AL_LC06");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("litChGPIO", 0, 14);
|
|
setSetting("litChGPIO", 1, 12);
|
|
setSetting("litChGPIO", 2, 13);
|
|
setSetting("litChGPIO", 3, 15);
|
|
setSetting("litChGPIO", 4, 5);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 4, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(XENON_SM_PW702U)
|
|
|
|
setSetting("board", DEVICE_XENON_SM_PW702U);
|
|
setSetting("device", "XENON_SM_PW702U");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 4);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(AUTHOMETION_LYT8266)
|
|
|
|
// AUTHOMETION LYT8266
|
|
// https://authometion.com/shop/en/home/13-lyt8266.html
|
|
|
|
setSetting("board", DEVICE_AUTHOMETION_LYT8266);
|
|
setSetting("device", "AUTHOMETION_LYT8266");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("litChGPIO", 0, 13);
|
|
setSetting("litChGPIO", 1, 12);
|
|
setSetting("litChGPIO", 2, 14);
|
|
setSetting("litChGPIO", 3, 2);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
|
|
setSetting("litEnableGPIO", 15);
|
|
setSetting("litEnableLogic", GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(ARILUX_E27)
|
|
|
|
setSetting("board", DEVICE_ARILUX_E27);
|
|
setSetting("device", "ARILUX_E27");
|
|
setSetting("fw", ESPURNA_MY92XX);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("myModel", 0); // 4 channels per chip
|
|
setSetting("myChips", 1);
|
|
setSetting("myDIGPIO", 13);
|
|
setSetting("myDCKIGPIO", 15);
|
|
setSetting("myMapping", "0123");
|
|
|
|
#elif defined(YJZK_SWITCH_2CH)
|
|
|
|
setSetting("board", DEVICE_YJZK_SWITCH_2CH);
|
|
setSetting("device", "YJZK_SWITCH_2CH");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnGPIO", 1, 9);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyGPIO", 1, 5);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_DUAL_R2)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_DUAL_R2);
|
|
setSetting("device", "ITEAD_SONOFF_DUAL_R2");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("btnGPIO", 1, 9);
|
|
setSetting("btnGPIO", 2, 10);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 1, 1);
|
|
setSetting("btnRelay", 2, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyGPIO", 1, 5);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(GENERIC_8CH)
|
|
|
|
setSetting("board", DEVICE_GENERIC_8CH);
|
|
setSetting("device", "GENERIC_8CH");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("rlyGPIO", 0, 0);
|
|
setSetting("rlyGPIO", 1, 2);
|
|
setSetting("rlyGPIO", 2, 4);
|
|
setSetting("rlyGPIO", 3, 5);
|
|
setSetting("rlyGPIO", 4, 12);
|
|
setSetting("rlyGPIO", 5, 13);
|
|
setSetting("rlyGPIO", 6, 14);
|
|
setSetting("rlyGPIO", 7, 15);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 4, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 5, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 6, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 7, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ARILUX_AL_LC01)
|
|
|
|
setSetting("board", DEVICE_ARILUX_AL_LC01);
|
|
setSetting("device", "ARILUX_AL_LC01");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("litChGPIO", 0, 5);
|
|
setSetting("litChGPIO", 1, 12);
|
|
setSetting("litChGPIO", 2, 13);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(ARILUX_AL_LC11)
|
|
|
|
setSetting("board", DEVICE_ARILUX_AL_LC11);
|
|
setSetting("device", "ARILUX_AL_LC11");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("litChGPIO", 0, 5);
|
|
setSetting("litChGPIO", 1, 4);
|
|
setSetting("litChGPIO", 2, 14);
|
|
setSetting("litChGPIO", 3, 13);
|
|
setSetting("litChGPIO", 4, 12);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 4, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(ARILUX_AL_LC02)
|
|
|
|
setSetting("board", DEVICE_ARILUX_AL_LC02);
|
|
setSetting("device", "ARILUX_AL_LC02");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("litChGPIO", 0, 12);
|
|
setSetting("litChGPIO", 1, 5);
|
|
setSetting("litChGPIO", 2, 13);
|
|
setSetting("litChGPIO", 3, 15);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 3, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(KMC_70011)
|
|
|
|
// KMC 70011
|
|
// https://www.amazon.com/KMC-Monitoring-Required-Control-Compatible/dp/B07313TH7B
|
|
|
|
setSetting("board", DEVICE_KMC_70011);
|
|
setSetting("device", "KMC_70011");
|
|
setSetting("fw", ESPURNA_HLW8012);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 14);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("hlwEnabled", 1);
|
|
setSetting("hlwSELGPIO", 12);
|
|
setSetting("hlwCF1GPIO", 5);
|
|
setSetting("hlwCFGPIO", 4);
|
|
setSetting("hlwVolResUp", 2000000);
|
|
|
|
#elif defined(GIZWITS_WITTY_CLOUD)
|
|
|
|
setSetting("board", DEVICE_GIZWITS_WITTY_CLOUD);
|
|
setSetting("device", "GIZWITS_WITTY_CLOUD");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("btnGPIO", 0, 4);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngLngClick", 0, BUTTON_MODE_RESET);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("anaEnabled", 1);
|
|
|
|
setSetting("litChGPIO", 0, 15);
|
|
setSetting("litChGPIO", 1, 12);
|
|
setSetting("litChGPIO", 2, 13);
|
|
setSetting("litChLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 1, GPIO_LOGIC_DIRECT);
|
|
setSetting("litChLogic", 2, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(EUROMATE_WIFI_STECKER_SCHUKO)
|
|
|
|
// Euromate (?) Wifi Stecker Shuko
|
|
// https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko/p/2291706
|
|
// Thanks to @Geitde
|
|
|
|
// The relay in the device is not a bistable (latched) relay.
|
|
// The device is reported to have a flip-flop circuit to drive the relay
|
|
// So @Geitde hack is still the only possible
|
|
// Hack: drive GPIO12 low and use GPIO5 as normal relay pin:
|
|
|
|
setSetting("board", DEVICE_EUROMATE_WIFI_STECKER_SCHUKO);
|
|
setSetting("device", "EUROMATE_WIFI_STECKER_SCHUKO");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 14);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 4);
|
|
setSetting("ledGPIO", 1, 12);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("ledLogic", 1, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 5);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(TONBUX_POWERSTRIP02)
|
|
|
|
setSetting("board", DEVICE_TONBUX_POWERSTRIP02);
|
|
setSetting("device", "TONBUX_POWERSTRIP02");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 5);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 1);
|
|
|
|
setSetting("ledGPIO", 0, 0); // 1 blue led
|
|
setSetting("ledGPIO", 1, 3); // 3 red leds
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 4);
|
|
setSetting("rlyGPIO", 1, 13);
|
|
setSetting("rlyGPIO", 2, 12);
|
|
setSetting("rlyGPIO", 3, 14);
|
|
setSetting("rlyGPIO", 4, 16); // Not a relay. USB ports on/off
|
|
setSetting("rlyType", 0, RELAY_TYPE_INVERSE);
|
|
setSetting("rlyType", 1, RELAY_TYPE_INVERSE);
|
|
setSetting("rlyType", 2, RELAY_TYPE_INVERSE);
|
|
setSetting("rlyType", 3, RELAY_TYPE_INVERSE);
|
|
setSetting("rlyType", 4, RELAY_TYPE_NORMAL); // Not a relay. USB ports on/off
|
|
|
|
#elif defined(LINGAN_SWA1)
|
|
|
|
setSetting("board", DEVICE_LINGAN_SWA1);
|
|
setSetting("device", "LINGAN_SWA1");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 4);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 5);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(HEYGO_HY02)
|
|
|
|
setSetting("board", DEVICE_HEYGO_HY02);
|
|
setSetting("device", "HEYGO_HY02");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 4);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(MAXCIO_WUS002S)
|
|
|
|
setSetting("board", DEVICE_MAXCIO_WUS002S);
|
|
setSetting("device", "MAXCIO_WUS002S");
|
|
setSetting("fw", ESPURNA_HLW8012);
|
|
|
|
setSetting("btnGPIO", 0, 2);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 3);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 13);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("hlwEnabled", 1);
|
|
setSetting("hlwSELGPIO", 12);
|
|
setSetting("hlwCF1GPIO", 5);
|
|
setSetting("hlwCFGPIO", 4);
|
|
setSetting("hlwCurRes", 0.002);
|
|
setSetting("hlwVolResUp", 2000000);
|
|
|
|
#elif defined(YIDIAN_XSSSA05)
|
|
|
|
setSetting("board", DEVICE_YIDIAN_XSSSA05);
|
|
setSetting("device", "YIDIAN_XSSSA05");
|
|
setSetting("fw", ESPURNA_HLW8012);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 4);
|
|
setSetting("ledGPIO", 2, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("ledLogic", 2, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("hlwEnabled", 1);
|
|
setSetting("hlwSELGPIO", 3);
|
|
setSetting("hlwCF1GPIO", 14);
|
|
setSetting("hlwCFGPIO", 5);
|
|
setSetting("hlwCurRes", 0.001);
|
|
setSetting("hlwVolResUp", 2400000);
|
|
|
|
#elif defined(TONBUX_XSSSA06)
|
|
|
|
setSetting("board", DEVICE_TONBUX_XSSSA06);
|
|
setSetting("device", "TONBUX_XSSSA06");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 0); // Red
|
|
setSetting("ledGPIO", 0, 5); // Green
|
|
setSetting("ledGPIO", 0, 2); // Blue
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 15);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(GREEN_ESP8266RELAY)
|
|
|
|
// GREEN ESP8266 RELAY MODULE
|
|
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180323113846&SearchText=Green+ESP8266
|
|
|
|
setSetting("board", DEVICE_GREEN_ESP8266RELAY);
|
|
setSetting("device", "GREEN_ESP8266RELAY");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 5);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 4);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(IKE_ESPIKE)
|
|
|
|
// Henrique Gravina ESPIKE
|
|
// https://github.com/Henriquegravina/Espike
|
|
|
|
setSetting("board", DEVICE_IKE_ESPIKE);
|
|
setSetting("device", "IKE_ESPIKE");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnGPIO", 1, 12);
|
|
setSetting("btnGPIO", 2, 14);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 2, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
setSetting("btnRelay", 2, 2);
|
|
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 4);
|
|
setSetting("rlyGPIO", 1, 5);
|
|
setSetting("rlyGPIO", 2, 16);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ARNIEX_SWIFITCH)
|
|
|
|
// SWIFITCH
|
|
// https://github.com/ArnieX/swifitch
|
|
|
|
setSetting("board", DEVICE_ARNIEX_SWIFITCH);
|
|
setSetting("device", "ARNIEX_SWIFITCH");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 4);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP);
|
|
setSetting("btnRelay", 0, 1);
|
|
setSetting("btnPress", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnClick", 0, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE);
|
|
|
|
setSetting("ledGPIO", 0, 12);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 5);
|
|
setSetting("rlyType", 0, RELAY_TYPE_INVERSE);
|
|
|
|
#elif defined(GENERIC_ESP01S_RELAY_V40)
|
|
|
|
// ESP-01S RELAY v4.0
|
|
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180404024035&SearchText=esp-01s+relay
|
|
|
|
setSetting("board", DEVICE_GENERIC_ESP01S_RELAY_V40);
|
|
setSetting("device", "GENERIC_ESP01S_RELAY_V40");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 0);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(GENERIC_ESP01S_RGBLED_V10)
|
|
|
|
// ESP-01S RGB LED v1.0 (some sold with ws2818)
|
|
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180404023816&SearchText=esp-01s+led+controller
|
|
|
|
setSetting("board", DEVICE_GENERIC_ESP01S_RGBLED_V10);
|
|
setSetting("device", "GENERIC_ESP01S_RGBLED_V10");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
#elif defined(HELTEC_TOUCHRELAY)
|
|
|
|
// Heltec Touch Relay
|
|
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180408043114&SearchText=esp8266+touch+relay
|
|
|
|
setSetting("board", DEVICE_HELTEC_TOUCHRELAY);
|
|
setSetting("device", "HELTEC_TOUCHRELAY");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 14);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 1);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(GENERIC_ESP01S_DHT11_V10)
|
|
|
|
// ESP-01S DHT11 v1.0
|
|
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180410105907&SearchText=esp-01s+dht11
|
|
|
|
setSetting("board", DEVICE_GENERIC_ESP01S_DHT11_V10);
|
|
setSetting("device", "GENERIC_ESP01S_DHT11_V10");
|
|
setSetting("fw", ESPURNA_SENSOR);
|
|
|
|
setSetting("dhtEnabled", 1);
|
|
setSetting("dhtGPIO", 0, 2);
|
|
setSetting("dhtType", 0, DHT_CHIP_DHT11);
|
|
|
|
#elif defined(GENERIC_ESP01S_DS18B20_V10)
|
|
|
|
// ESP-01S DS18B20 v1.0
|
|
// https://www.aliexpress.com/wholesale?catId=0&initiative_id=SB_20180410105933&SearchText=esp-01s+ds18b20
|
|
|
|
setSetting("board", DEVICE_GENERIC_ESP01S_DS18B20_V10);
|
|
setSetting("device", "GENERIC_ESP01S_DS18B20_V10");
|
|
setSetting("fw", ESPURNA_SENSOR);
|
|
|
|
setSetting("dsEnabled", 1);
|
|
setSetting("dsGPIO", 0, 2);
|
|
|
|
#elif defined(ZHILDE_EU44_W)
|
|
|
|
// Zhilde ZLD-EU44-W
|
|
// http://www.zhilde.com/product/60705150109-805652505/EU_WiFi_Surge_Protector_Extension_Socket_4_Outlets_works_with_Amazon_Echo_Smart_Power_Strip.html
|
|
|
|
setSetting("board", DEVICE_ZHILDE_EU44_W);
|
|
setSetting("device", "ZHILDE_EU44_W");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 3);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 1);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 5);
|
|
setSetting("rlyGPIO", 1, 4);
|
|
setSetting("rlyGPIO", 2, 12);
|
|
setSetting("rlyGPIO", 3, 13);
|
|
setSetting("rlyGPIO", 4, 14);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 4, RELAY_TYPE_NORMAL);
|
|
|
|
// Based on the reporter, this product uses GPIO1 and 3 for the button
|
|
// and onboard LED, so hardware serial should be disabled...
|
|
setSetting("dbgSerial", 0);
|
|
|
|
#elif defined(ITEAD_SONOFF_POW_R2)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_POW_R2);
|
|
setSetting("device", "ITEAD_SONOFF_POW_R2");
|
|
setSetting("fw", ESPURNA_CSE77XX);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("cseEnabled", 1);
|
|
setSetting("cseGPIO", 1);
|
|
|
|
setSetting("dbgSerial", 0);
|
|
|
|
#elif defined(LUANI_HVIO)
|
|
|
|
// Luani HVIO
|
|
// https://luani.de/projekte/esp8266-hvio/
|
|
// https://luani.de/blog/esp8266-230v-io-modul/
|
|
|
|
setSetting("board", DEVICE_LUANI_HVIO);
|
|
setSetting("device", "LUANI_HVIO");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("ledGPIO", 0, 15);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("btnGPIO", 0, 12);
|
|
setSetting("btnGPIO", 1, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
|
|
|
|
setSetting("rlyGPIO", 0, 4);
|
|
setSetting("rlyGPIO", 1, 5);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ALLNET_4DUINO_IOT_WLAN_RELAIS)
|
|
|
|
// Allnet 4duino ESP8266-UP-Relais
|
|
// http://www.allnet.de/de/allnet-brand/produkte/neuheiten/p/allnet-4duino-iot-wlan-relais-unterputz-esp8266-up-relais/
|
|
// https://shop.allnet.de/fileadmin/transfer/products/148814.pdf
|
|
|
|
setSetting("board", DEVICE_ALLNET_4DUINO_IOT_WLAN_RELAIS);
|
|
setSetting("device", "ALLNET_4DUINO_IOT_WLAN_RELAIS");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("ledGPIO", 0, 0);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 14);
|
|
setSetting("rlyResetGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_LATCHED);
|
|
|
|
#elif defined(TONBUX_MOSQUITO_KILLER)
|
|
|
|
// Tonbux 50-100M Smart Mosquito Killer USB
|
|
// https://www.aliexpress.com/item/Original-Tonbux-50-100M-Smart-Mosquito-Killer-USB-Plug-No-Noise-Repellent-App-Smart-Module/32859330820.html
|
|
|
|
setSetting("board", DEVICE_TONBUX_MOSQUITO_KILLER);
|
|
setSetting("device", "TONBUX_MOSQUITO_KILLER");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 2);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 15);
|
|
setSetting("ledGPIO", 1, 14);
|
|
setSetting("ledGPIO", 2, 12);
|
|
setSetting("ledGPIO", 3, 16);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE);
|
|
setSetting("ledLogic", 2, GPIO_LOGIC_DIRECT);
|
|
setSetting("ledLogic", 3, GPIO_LOGIC_DIRECT);
|
|
setSetting("ledMode", 0, LED_MODE_WIFI);
|
|
setSetting("ledMode", 1, LED_MODE_RELAY);
|
|
setSetting("ledRelay", 1, 0);
|
|
|
|
setSetting("rlyGPIO", 0, 5); // Fan
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(NEO_COOLCAM_NAS_WR01W)
|
|
|
|
// NEO Coolcam NAS-WR01W Wifi Smart Power Plug
|
|
// https://es.aliexpress.com/item/-/32854589733.html?spm=a219c.12010608.0.0.6d084e68xX0y5N
|
|
// https://www.fasttech.com/product/9649426-neo-coolcam-nas-wr01w-wifi-smart-power-plug-eu
|
|
|
|
setSetting("board", DEVICE_NEO_COOLCAM_NAS_WR01W);
|
|
setSetting("device", "NEO_COOLCAM_NAS_WR01W");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 4);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(PILOTAK_ESP_DIN_V1)
|
|
|
|
// ESP-DIN relay board V1
|
|
// https://github.com/pilotak/esp_din
|
|
|
|
setSetting("board", DEVICE_PILOTAK_ESP_DIN_V1);
|
|
setSetting("device", "PILOTAK_ESP_DIN_V1");
|
|
setSetting("fw", ESPURNA_SENSOR);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 15);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 4);
|
|
setSetting("rlyGPIO", 1, 5);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("digEnabled", 1);
|
|
setSetting("digGPIO", 0, 16);
|
|
setSetting("digMode", 0, INPUT);
|
|
|
|
setSetting("dsEnabled", 1);
|
|
setSetting("dsGPIO", 0, 2);
|
|
|
|
setSetting("i2cEnable", 1);
|
|
setSetting("i2cSDAGPIO", 12);
|
|
setSetting("i2cSCLGPIO", 13);
|
|
|
|
setSetting("rfEnabled", 1);
|
|
setSetting("rfGPIO", 14);
|
|
|
|
#elif defined(ESTINK_WIFI_POWER_STRIP)
|
|
|
|
// Estink Wifi Power Strip
|
|
// https://www.amazon.de/Steckdosenleiste-Ladeger%C3%A4t-Sprachsteuerung-SmartphonesTablets-Android/dp/B0796W5FZY
|
|
// Fornorm Wi-Fi USB Extension Socket (ZLD-34EU)
|
|
// https://www.aliexpress.com/item/Fornorm-WiFi-Extension-Socket-with-Surge-Protector-Smart-Power-Strip-3-Outlets-and-4-USB-Charging/32849743948.html
|
|
|
|
setSetting("board", DEVICE_ESTINK_WIFI_POWER_STRIP);
|
|
setSetting("device", "ESTINK_WIFI_POWER_STRIP");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 16);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 3);
|
|
|
|
setSetting("ledGPIO", 0, 0);
|
|
setSetting("ledGPIO", 1, 12);
|
|
setSetting("ledGPIO", 2, 3);
|
|
setSetting("ledGPIO", 3, 5);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE);
|
|
setSetting("ledLogic", 2, GPIO_LOGIC_INVERSE);
|
|
setSetting("ledLogic", 3, GPIO_LOGIC_INVERSE);
|
|
setSetting("ledMode", 0, LED_MODE_FINDME);
|
|
setSetting("ledMode", 1, LED_MODE_FOLLOW);
|
|
setSetting("ledMode", 2, LED_MODE_FOLLOW);
|
|
setSetting("ledMode", 3, LED_MODE_FOLLOW);
|
|
setSetting("ledRelay", 1, 1);
|
|
setSetting("ledRelay", 2, 2);
|
|
setSetting("ledRelay", 3, 3);
|
|
|
|
setSetting("rlyGPIO", 0, 14); // USB power
|
|
setSetting("rlyGPIO", 1, 13); // power plug 1
|
|
setSetting("rlyGPIO", 2, 4); // power plug 2
|
|
setSetting("rlyGPIO", 3, 15); // power plug 3
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
|
|
|
|
// Disable UART noise since this board uses GPIO3
|
|
setSetting("dbgSerial", 0);
|
|
|
|
#elif defined(BH_ONOFRE)
|
|
|
|
// Bruno Horta's OnOfre
|
|
// https://www.bhonofre.pt/
|
|
// https://github.com/brunohorta82/BH_OnOfre/
|
|
|
|
setSetting("board", DEVICE_BH_ONOFRE);
|
|
setSetting("device", "BH_ONOFRE");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 12);
|
|
setSetting("btnGPIO", 1, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP);
|
|
setSetting("btnMode", 1, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH | BUTTON_SET_PULLUP);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnRelay", 1, 1);
|
|
|
|
setSetting("rlyGPIO", 0, 4);
|
|
setSetting("rlyGPIO", 1, 5);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(BLITZWOLF_BWSHP2)
|
|
|
|
// Several devices under different names uing a power chip labelled BL0937 or HJL-01
|
|
// * Blitzwolf (https://www.amazon.es/Inteligente-Temporización-Dispositivos-Cualquier-BlitzWolf/dp/B07BMQP142)
|
|
// * HomeCube (https://www.amazon.de/Steckdose-Homecube-intelligente-Verbrauchsanzeige-funktioniert/dp/B076Q2LKHG)
|
|
// * Coosa (https://www.amazon.com/COOSA-Monitoring-Function-Campatible-Assiatant/dp/B0788W9TDR)
|
|
// * Goosund (http://www.gosund.com/?m=content&c=index&a=show&catid=6&id=5)
|
|
// * Ablue (https://www.amazon.de/Intelligente-Steckdose-Ablue-Funktioniert-Assistant/dp/B076DRFRZC)
|
|
|
|
setSetting("board", DEVICE_BLITZWOLF_BWSHP2);
|
|
setSetting("device", "BLITZWOLF_BWSHP2");
|
|
setSetting("fw", ESPURNA_HLW8012);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledGPIO", 1, 0);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE);
|
|
setSetting("ledMode", 0, LED_MODE_WIFI);
|
|
setSetting("ledMode", 1, LED_MODE_FINDME);
|
|
setSetting("ledRelay", 1, 0);
|
|
|
|
setSetting("rlyGPIO", 0, 15);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("hlwSELGPIO", 12);
|
|
setSetting("hlwCF1GPIO", 14);
|
|
setSetting("hlwCFGPIO", 5);
|
|
setSetting("hlwCurSel", LOW);
|
|
setSetting("hlwIntMode", FALLING);
|
|
setSetting("curRatio", 25740);
|
|
setSetting("volRatio", 313400);
|
|
setSetting("pwrRatio", 3414290);
|
|
|
|
#elif defined(HOMECUBE_16A)
|
|
|
|
// Homecube 16A is similar to BLITZWOLF_BWSHP2 but some pins differ and it also has RGB LEDs
|
|
// https://www.amazon.de/gp/product/B07D7RVF56/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
|
|
|
|
setSetting("board", DEVICE_HOMECUBE_16A);
|
|
setSetting("device", "HOMECUBE_16A");
|
|
setSetting("fw", ESPURNA_HLW8012);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledGPIO", 1, 12);
|
|
setSetting("ledGPIO", 2, 0);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
setSetting("ledLogic", 1, GPIO_LOGIC_DIRECT);
|
|
setSetting("ledLogic", 2, GPIO_LOGIC_DIRECT);
|
|
setSetting("ledMode", 0, LED_MODE_WIFI);
|
|
setSetting("ledMode", 1, LED_MODE_FINDME);
|
|
setSetting("ledMode", 2, LED_MODE_OFF);
|
|
setSetting("ledRelay", 1, 0);
|
|
|
|
setSetting("rlyGPIO", 0, 15);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("hlwSELGPIO", 16);
|
|
setSetting("hlwCF1GPIO", 14);
|
|
setSetting("hlwCFGPIO", 5);
|
|
setSetting("hlwCurSel", LOW);
|
|
setSetting("hlwIntMode", FALLING);
|
|
setSetting("curRatio", 25740);
|
|
setSetting("volRatio", 313400);
|
|
setSetting("pwrRatio", 3414290);
|
|
|
|
#elif defined(TINKERMAN_ESPURNA_SWITCH)
|
|
|
|
setSetting("board", DEVICE_TINKERMAN_ESPURNA_SWITCH);
|
|
setSetting("device", "TINKERMAN_ESPURNA_SWITCH");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 4);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON);
|
|
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_DIRECT);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(ITEAD_SONOFF_S31)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_S31);
|
|
setSetting("device", "ITEAD_SONOFF_S31");
|
|
setSetting("fw", ESPURNA_CSE77XX);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("cseEnabled", 1);
|
|
setSetting("cseGPIO", 1);
|
|
|
|
setSetting("dbgSerial", 0);
|
|
|
|
#elif defined(STM_RELAY)
|
|
|
|
setSetting("board", DEVICE_STM_RELAY);
|
|
setSetting("device", "STM_RELAY");
|
|
setSetting("fw", ESPURNA_STM);
|
|
|
|
setSetting("rlyDummy", 2);
|
|
setSetting("rlyProvider", RELAY_PROVIDER_STM);
|
|
|
|
setSetting("dbgSerial", 0);
|
|
|
|
#elif defined(VANZAVANZU_SMART_WIFI_PLUG_MINI)
|
|
|
|
// VANZAVANZU Smart Outlet Socket (based on BL0937 or HJL-01)
|
|
// https://www.amazon.com/Smart-Plug-Wifi-Mini-VANZAVANZU/dp/B078PHD6S5
|
|
|
|
setSetting("board", DEVICE_VANZAVANZU_SMART_WIFI_PLUG_MINI);
|
|
setSetting("device", "VANZAVANZU_SMART_WIFI_PLUG_MINI");
|
|
setSetting("fw", ESPURNA_HLW8012);
|
|
|
|
setSetting("btnGPIO", 0, 13);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH);
|
|
setSetting("btnRelay", 0, 0);
|
|
|
|
setSetting("ledGPIO", 0, 2);
|
|
setSetting("ledGPIO", 1, 0);
|
|
setSetting("ledLogic", 0, GPIO_LOGIC_INVERSE);
|
|
setSetting("ledLogic", 1, GPIO_LOGIC_INVERSE);
|
|
setSetting("ledMode", 0, LED_MODE_WIFI);
|
|
setSetting("ledMode", 1, LED_MODE_FINDME);
|
|
setSetting("ledRelay", 1, 0);
|
|
|
|
setSetting("rlyGPIO", 0, 15);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
|
|
setSetting("hlwSELGPIO", 3);
|
|
setSetting("hlwCF1GPIO", 14);
|
|
setSetting("hlwCFGPIO", 5);
|
|
setSetting("hlwCurSel", LOW);
|
|
setSetting("hlwIntMode", FALLING);
|
|
setSetting("curRatio", 25740);
|
|
setSetting("volRatio", 313400);
|
|
setSetting("pwrRatio", 3414290);
|
|
|
|
setSetting("dbgSerial", 0);
|
|
|
|
#elif defined(GENERIC_GEIGER_COUNTER)
|
|
|
|
setSetting("board", DEVICE_GENERIC_GEIGER_COUNTER);
|
|
setSetting("device", "GENERIC_GEIGER_COUNTER");
|
|
setSetting("fw", ESPURNA_GEIGER);
|
|
|
|
setSetting("geiEnabled", 1);
|
|
setSetting("geiGPIO", 5);
|
|
|
|
#elif defined(TINKERMAN_RFM69GW)
|
|
|
|
// Check http://tinkerman.cat/rfm69-wifi-gateway/
|
|
|
|
setSetting("board", DEVICE_TINKERMAN_RFM69GW);
|
|
setSetting("device", "TINKERMAN_RFM69GW");
|
|
setSetting("fw", ESPURNA_RFM69);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
|
|
setSetting("rfm69Enabled", 1);
|
|
setSetting("rfm69CSGPIO", 15);
|
|
setSetting("rfm69IRQGPIO", 5);
|
|
setSetting("rfm69ResetGPIO", 7);
|
|
setSetting("rfm69HW", 0);
|
|
|
|
#elif defined(ITEAD_SONOFF_IFAN02)
|
|
|
|
setSetting("board", DEVICE_ITEAD_SONOFF_IFAN02);
|
|
setSetting("device", "ITEAD_SONOFF_IFAN02");
|
|
setSetting("fw", ESPURNA_BASIC);
|
|
|
|
setSetting("btnGPIO", 0, 0);
|
|
setSetting("btnGPIO", 1, 9);
|
|
setSetting("btnGPIO", 2, 10);
|
|
setSetting("btnGPIO", 3, 14);
|
|
|
|
setSetting("ledGPIO", 0, 13);
|
|
setSetting("ledLogic", 0, 1);
|
|
setSetting("ledMode", 0, LED_MODE_WIFI);
|
|
|
|
setSetting("rlyGPIO", 0, 12);
|
|
setSetting("rlyGPIO", 1, 5);
|
|
setSetting("rlyGPIO", 2, 4);
|
|
setSetting("rlyGPIO", 3, 15);
|
|
setSetting("rlyType", 0, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 1, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 2, RELAY_TYPE_NORMAL);
|
|
setSetting("rlyType", 3, RELAY_TYPE_NORMAL);
|
|
|
|
#elif defined(GENERIC_AG_L4)
|
|
|
|
setSetting("board", DEVICE_GENERIC_AG_L4);
|
|
setSetting("device", "GENERIC_AG_L4");
|
|
setSetting("fw", ESPURNA_DIMMER);
|
|
|
|
setSetting("btnGPIO", 0, 4);
|
|
setSetting("btnGPIO", 1, 2);
|
|
setSetting("btnRelay", 0, 0);
|
|
setSetting("btnMode", 0, BUTTON_PUSHBUTTON);
|
|
setSetting("btnPress", 0, BUTTON_MODE_TOGGLE);
|
|
setSetting("btnClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnDblClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngClick", 0, BUTTON_MODE_NONE);
|
|
setSetting("btnLngLngClick", 0, BUTTON_MODE_NONE);
|
|
|
|
setSetting("ledGPIO", 0, 5);
|
|
setSetting("ledGPIO", 1, 16);
|
|
setSetting("ledLogic", 0, 0);
|
|
setSetting("ledLogic", 1, 1);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("litChGPIO", 0, 14);
|
|
setSetting("litChGPIO", 1, 13);
|
|
setSetting("litChGPIO", 2, 12);
|
|
setSetting("litChLogic", 0, 0);
|
|
setSetting("litChLogic", 1, 0);
|
|
setSetting("litChLogic", 2, 0);
|
|
|
|
#elif defined(LOHAS_9W)
|
|
|
|
setSetting("board", DEVICE_LOHAS_9W);
|
|
setSetting("device", "LOHAS_9W");
|
|
setSetting("fw", ESPURNA_MY92XX);
|
|
|
|
setSetting("rlyProvider", RELAY_PROVIDER_LIGHT);
|
|
setSetting("rlyDummy", 1);
|
|
|
|
setSetting("litChFactor", 4, 0.1); // White LEDs are way more bright in the B1
|
|
setSetting("litChFactor", 5, 0.1); // White LEDs are way more bright in the B1
|
|
|
|
setSetting("myModel", 1); // 3 channels per chip
|
|
setSetting("myChips", 2);
|
|
setSetting("myDIGPIO", 13);
|
|
setSetting("myDCKIGPIO", 15);
|
|
setSetting("myMapping", "01234"); // TODO
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
void _deviceMigrateMoveIndexDown(const char * key, int offset = 0) {
|
|
if (hasSetting(key, 0)) return;
|
|
for (unsigned char index = 1; index < SETTINGS_MAX_LIST_COUNT; index++) {
|
|
if (hasSetting(key, index)) {
|
|
setSetting(key, index - 1, getSetting(key, index).toInt() + offset);
|
|
} else {
|
|
delSetting(key, index - 1);
|
|
}
|
|
}
|
|
}
|
|
|
|
// Configuration versions
|
|
//
|
|
// 1: based on Embedis, no board definitions
|
|
// 2: based on Embedis, with board definitions 1-based
|
|
// 3: based on Embedis, with board definitions 0-based
|
|
// 4: based on Embedis, added sensors and force resetting
|
|
|
|
void _deviceMigrate() {
|
|
|
|
moveSetting("boardName", "device");
|
|
moveSettings("relayGPIO", "rlyGPIO");
|
|
moveSettings("relayResetGPIO", "rlyResetGPIO");
|
|
moveSettings("relayType", "rlyType");
|
|
moveSetting("selGPIO", "hlwSELGPIO");
|
|
moveSetting("cfGPIO", "hlwCFGPIO");
|
|
moveSetting("cf1GPIO", "hlwCF1GPIO");
|
|
moveSetting("relayProvider", "rlyProvider");
|
|
moveSetting("relays", "rlyDummy");
|
|
moveSettings("chGPIO", "litChGPIO");
|
|
moveSettings("chLogic", "litChLogic");
|
|
moveSetting("enGPIO", "litEnableGPIO");
|
|
moveSetting("hlwSelC", "hlwCurLevel");
|
|
moveSetting("hlwIntM", "hlwInt");
|
|
delSetting("ledWifi");
|
|
delSetting("lightProvider");
|
|
delSetting("litProvider");
|
|
|
|
// Get config version
|
|
unsigned int board = getSetting("board", 0).toInt();
|
|
unsigned int config_version = getSetting("cfg", board > 0 ? 2 : 1).toInt();
|
|
setSetting("cfg", CFG_VERSION);
|
|
|
|
if (config_version == 2) {
|
|
_deviceMigrateMoveIndexDown("ledGPIO");
|
|
_deviceMigrateMoveIndexDown("ledLogic");
|
|
_deviceMigrateMoveIndexDown("btnGPIO");
|
|
_deviceMigrateMoveIndexDown("btnRelay", -1);
|
|
_deviceMigrateMoveIndexDown("rlyGPIO");
|
|
_deviceMigrateMoveIndexDown("rlyType");
|
|
}
|
|
|
|
}
|
|
|
|
void _deviceSpecific() {
|
|
|
|
// These devices use the hardware UART
|
|
// to communicate to secondary microcontrollers
|
|
#if \
|
|
(ESPURNA_IMAGE == ESPURNA_SONOFF_RFBRIDGE) || \
|
|
(ESPURNA_IMAGE == ESPURNA_SONOFF_DUAL) || \
|
|
(ESPURNA_IMAGE == ESPURNA_STM)
|
|
unsigned long speed = getSetting("dbgSpeed", DEBUG_SERIAL_SPEED).toInt();
|
|
Serial.begin(speed);
|
|
#endif
|
|
|
|
}
|
|
|
|
// -----------------------------------------------------------------------------
|
|
|
|
void deviceSetup() {
|
|
|
|
_deviceMigrate();
|
|
_deviceLoad();
|
|
_deviceSpecific();
|
|
|
|
// Check match firmware-configuration
|
|
// At the time being, this will always match.
|
|
// In the future, custom loaded configuration
|
|
// might not match loaded firmware image
|
|
if (getSetting("fw", ESPURNA_CORE).toInt() != ESPURNA_IMAGE) {
|
|
DEBUG_MSG_P(PSTR("[HW] Configuration does not match firmware image!!!"));
|
|
}
|
|
|
|
}
|