You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
227 lines
7.8 KiB
227 lines
7.8 KiB
//--------------------------------------------------------------------------------
|
|
// General
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef TEMPERATURE_MIN_CHANGE
|
|
#define TEMPERATURE_MIN_CHANGE 0.0 // Minimum temperature change to report
|
|
#endif
|
|
|
|
#ifndef HUMIDITY_MIN_CHANGE
|
|
#define HUMIDITY_MIN_CHANGE 0 // Minimum humidity change to report
|
|
#endif
|
|
|
|
#define TEMPERATURE_DECIMALS 1 // Decimals for temperature values
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// DHTXX temperature/humidity sensor
|
|
// Enable support by passing DHT_SUPPORT=1 build flag
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef DHT_SUPPORT
|
|
#define DHT_SUPPORT 0
|
|
#endif
|
|
|
|
#ifndef DHT_PIN
|
|
#define DHT_PIN 14
|
|
#endif
|
|
|
|
#ifndef DHT_TYPE
|
|
#define DHT_TYPE DHT22
|
|
#endif
|
|
|
|
#ifndef DHT_PULLUP
|
|
#define DHT_PULLUP 0
|
|
#endif
|
|
|
|
#ifndef DHT_UPDATE_INTERVAL
|
|
#define DHT_UPDATE_INTERVAL 60000
|
|
#endif
|
|
|
|
#define DHT_TEMPERATURE_TOPIC "temperature"
|
|
#define DHT_HUMIDITY_TOPIC "humidity"
|
|
|
|
#define HUMIDITY_NORMAL 0
|
|
#define HUMIDITY_COMFORTABLE 1
|
|
#define HUMIDITY_DRY 2
|
|
#define HUMIDITY_WET 3
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// SI7021 temperature & humidity sensor
|
|
// Enable support by passing SI7021_SUPPORT=1 build flag
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef SI7021_SUPPORT
|
|
#define SI7021_SUPPORT 0
|
|
#endif
|
|
|
|
#ifndef SI7021_ADDRESS
|
|
#define SI7021_ADDRESS 0x40
|
|
#endif
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// DS18B20 temperature sensor
|
|
// Enable support by passing DS18B20_SUPPORT=1 build flag
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef DS18B20_SUPPORT
|
|
#define DS18B20_SUPPORT 0
|
|
#endif
|
|
|
|
#ifndef DS18B20_PIN
|
|
#define DS18B20_PIN 13
|
|
#endif
|
|
|
|
#ifndef DS18B20_PULLUP
|
|
#define DS18B20_PULLUP 1
|
|
#endif
|
|
|
|
#ifndef DS18B20_UPDATE_INTERVAL
|
|
#define DS18B20_UPDATE_INTERVAL 60000
|
|
#endif
|
|
|
|
#ifndef DS18B20_TEMPERATURE_TOPIC
|
|
#define DS18B20_TEMPERATURE_TOPIC "temperature"
|
|
#endif
|
|
|
|
#define DS18B20_RESOLUTION 9
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// Analog sensor
|
|
// Enable support by passing ANALOG_SUPPORT=1 build flag
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef ANALOG_SUPPORT
|
|
#define ANALOG_SUPPORT 0
|
|
#endif
|
|
|
|
#ifndef ANALOG_PIN
|
|
#define ANALOG_PIN 0
|
|
#endif
|
|
|
|
#ifndef ANALOG_UPDATE_INTERVAL
|
|
#define ANALOG_UPDATE_INTERVAL 60000
|
|
#endif
|
|
|
|
#define ANALOG_TOPIC "analog"
|
|
|
|
#if ANALOG_SUPPORT
|
|
#undef ADC_VCC_ENABLED
|
|
#define ADC_VCC_ENABLED 0
|
|
#endif
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// Counter sensor
|
|
// Enable support by passing COUNTER_SUPPORT=1 build flag
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef COUNTER_SUPPORT
|
|
#define COUNTER_SUPPORT 0 // Do not build with counter support by default
|
|
#endif
|
|
|
|
#ifndef COUNTER_PIN
|
|
#define COUNTER_PIN 2 // GPIO to monitor
|
|
#endif
|
|
|
|
#ifndef COUNTER_PIN_MODE
|
|
#define COUNTER_PIN_MODE INPUT // INPUT, INPUT_PULLUP
|
|
#endif
|
|
|
|
#ifndef COUNTER_INTERRUPT_MODE
|
|
#define COUNTER_INTERRUPT_MODE RISING // RISING, FALLING, BOTH
|
|
#endif
|
|
|
|
#ifndef COUNTER_UPDATE_INTERVAL
|
|
#define COUNTER_UPDATE_INTERVAL 5000 // Update counter every this millis
|
|
#endif
|
|
|
|
#define COUNTER_REPORT_EVERY 12 // Report counter every this updates (1 minute)
|
|
#define COUNTER_DEBOUNCE 10 // Do not register events within less than 10 millis
|
|
#define COUNTER_TOPIC "counter" // Default topic for MQTT, API and InfluxDB
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// Energy Monitor
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#define EMON_MAX_SAMPLES 1000 // Max number of samples to get
|
|
#define EMON_MAX_TIME 250 // Max time in ms to sample
|
|
#define EMON_FILTER_SPEED 512 // Mobile average filter speed
|
|
#define EMON_MAINS_VOLTAGE 230 // Mains voltage
|
|
#define EMON_REPORT_CURRENT 0 // Calculate current
|
|
#define EMON_REPORT_POWER 1 // Calculate power
|
|
#define EMON_REPORT_ENERGY 1 // Calculate energy
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// Energy Monitor based on interval analog GPIO
|
|
// Enable support by passing EMON_ANALOG_SUPPORT=1 build flag
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef EMON_ANALOG_SUPPORT
|
|
#define EMON_ANALOG_SUPPORT 0 // Do not build support by default
|
|
#endif
|
|
|
|
#define EMON_ANALOG_CURRENT_RATIO 30 // Current ratio in the clamp (30V/1A)
|
|
#define EMON_ANALOG_ADC_BITS 10 // ADC depth
|
|
#define EMON_ANALOG_REFERENCE_VOLTAGE 3.3 // Reference voltage of the ADC
|
|
|
|
#if EMON_ANALOG_SUPPORT
|
|
#undef ADC_VCC_ENABLED
|
|
#define ADC_VCC_ENABLED 0
|
|
#endif
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// Energy Monitor based on ADC121
|
|
// Enable support by passing EMON_ADC121_SUPPORT=1 build flag
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef EMON_ADC121_SUPPORT
|
|
#define EMON_ADC121_SUPPORT 0 // Do not build support by default
|
|
#endif
|
|
|
|
#define EMON_ADC121_I2C_ADDRESS 0x50 // I2C address of the ADC121
|
|
|
|
#define EMON_ADC121_CURRENT_RATIO 30 // Current ratio in the clamp (30V/1A)
|
|
#define EMON_ADC121_ADC_BITS 12 // ADC depth
|
|
#define EMON_ADC121_REFERENCE_VOLTAGE 3.3 // Reference voltage of the ADC
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// Energy Monitor based on ADS1X15
|
|
// Enable support by passing EMON_ADS1X15_SUPPORT=1 build flag
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef EMON_ADS1X15_SUPPORT
|
|
#define EMON_ADS1X15_SUPPORT 0 // Do not build support by default
|
|
#endif
|
|
|
|
#define EMON_ADS1X15_ADS1115 1 // 0 for ADS10115, 1 for ADS1115
|
|
#define EMON_ADS1X15_PORT_MASK 0x08 // A0=1 A1=2 A2=4 A4=8
|
|
#define EMON_ADS1X15_I2C_ADDRESS 0x48 // I2C address of the ADS1115
|
|
|
|
#define EMON_ADS1X15_CURRENT_RATIO 30 // Current ratio in the clamp (30V/1A)
|
|
#define EMON_ADS1X15_ADC_BITS 16 // ADC depth
|
|
#define EMON_ADS1X15_REFERENCE_VOLTAGE 8.192 // Double the gain for peak-to-peak
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// Particle Monitor based on Plantower PMSX003
|
|
// Enable support by passing PMSX003_SUPPORT=1 build flag
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef PMSX003_SUPPORT
|
|
#define PMSX003_SUPPORT 1
|
|
#endif
|
|
|
|
#define PMS_RX_PIN 13
|
|
#define PMS_TX_PIN 15
|
|
|
|
//--------------------------------------------------------------------------------
|
|
// Internal power montior
|
|
// Enable support by passing ADC_VCC_ENABLED=1 build flag
|
|
// Do not enable this if using the analog GPIO for any other thing
|
|
//--------------------------------------------------------------------------------
|
|
|
|
#ifndef ADC_VCC_ENABLED
|
|
#define ADC_VCC_ENABLED 1
|
|
#endif
|
|
|
|
#if ADC_VCC_ENABLED
|
|
ADC_MODE(ADC_VCC);
|
|
#endif
|