mh
/
mhsw-espurna


								// -----------------------------------------------------------------------------

								// Configuration HELP

								// -----------------------------------------------------------------------------

								//

								// MANUFACTURER: Name of the manufacturer of the board ("string")

								// DEVICE: Name of the device ("string")

								// BUTTON#_PIN: GPIO for the n-th button (1-based, up to 4 buttons)

								// BUTTON#_RELAY: Relay number that will be bind to the n-th button (1-based)

								// BUTTON#_MODE: A mask of options (BUTTON_PUSHBUTTON and BUTTON_SWITCH cannot be together)

								//   - BUTTON_PUSHBUTTON: button event is fired when released

								//   - BUTTON_SWITCH: button event is fired when pressed or released

								//   - BUTTON_DEFAULT_HIGH: there is a pull up in place

								//   - BUTTON_SET_PULLUP: set pullup by software

								// RELAY#_PIN: GPIO for the n-th relay (1-based, up to 4 relays)

								// RELAY#_PIN_INVERSE: Relay has inversed logic (closed or ON when pulled down)

								// RELAY#_LED: LED number that will be bind to the n-th relay (1-based)

								// LED#_PIN: GPIO for the n-th LED (1-based, up to 4 LEDs)

								// LED#_PIN_INVERSE: LED has inversed logic (lit when pulled down)

								// WIFI_LED: LED number that will used for WIFI notifications (1-based, defaults to 1)


								// -----------------------------------------------------------------------------

								// Development boards

								// -----------------------------------------------------------------------------


								#if defined(NODEMCUV2)


								    #define MANUFACTURER        "NODEMCU"

								    #define DEVICE              "LOLIN"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_LNGCLICK    BUTTON_MODE_PULSE

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

									#define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								#elif defined(D1_RELAYSHIELD)


								    #define MANUFACTURER        "WEMOS"

								    #define DEVICE              "D1_MINI"

								    #define RELAY1_PIN          5

								    #define RELAY1_PIN_INVERSE  0

									#define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								// -----------------------------------------------------------------------------

								// ESPurna

								// -----------------------------------------------------------------------------


								#elif defined(ESPURNA_H)


								    #define MANUFACTURER        "TINKERMAN"

								    #define DEVICE              "ESPURNA_H"

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  1

								    #define LED1_PIN            5

								    #define LED1_PIN_INVERSE    0

								    #define BUTTON1_PIN         4

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define ENABLE_POW          1


								// -----------------------------------------------------------------------------

								// Itead Studio boards

								// -----------------------------------------------------------------------------


								#elif defined(SONOFF)


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(SONOFF_TH)


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_TH"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(SONOFF_SV)


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_SV"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(SLAMPHER)


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SLAMPHER"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(S20)


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "S20"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(SONOFF_TOUCH)


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_TOUCH"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(SONOFF_POW)


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_POW"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define LED1_PIN            15

								    #define LED1_PIN_INVERSE    0

								    #define ENABLE_POW          1


								#elif defined(SONOFF_DUAL)


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_DUAL"

								    #define BUTTON3_RELAY       1

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1

								    #undef SERIAL_BAUDRATE

								    #define SERIAL_BAUDRATE     19230

								    #undef RELAY_PROVIDER

								    #define RELAY_PROVIDER      RELAY_PROVIDER_DUAL


								#elif defined(SONOFF_4CH)


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_4CH"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_PIN         9

								    #define BUTTON2_RELAY       2

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON3_PIN         10

								    #define BUTTON3_RELAY       3

								    #define BUTTON3_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON4_PIN         14

								    #define BUTTON4_RELAY       4

								    #define BUTTON4_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define RELAY2_PIN          5

								    #define RELAY2_PIN_INVERSE  0

								    #define RELAY3_PIN          4

								    #define RELAY3_PIN_INVERSE  0

								    #define RELAY4_PIN          15

								    #define RELAY4_PIN_INVERSE  0

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_1CH_INCHING)


								    // The inching functionality is managed by a misterious IC in the board.

								    // You cannot control the inching button and functionality from the ESP8266

								    // Besides, enabling the inching functionality using the hardware button

								    // will result in the relay switching on and off continuously.

								    // Fortunately the unkown IC keeps memory of the hardware inching status

								    // so you can just disable it and forget. The inching LED must be lit.

								    // You can still use the pulse options from the web interface

								    // without problem.


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "1CH_INCHING"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_MOTOR)


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "MOTOR"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								// -----------------------------------------------------------------------------

								// Electrodragon boards

								// -----------------------------------------------------------------------------


								#elif defined(ESP_RELAY_BOARD)


								    #define MANUFACTURER        "ELECTRODRAGON"

								    #define DEVICE              "ESP_RELAY_BOARD"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_PIN         2

								    #define BUTTON2_RELAY       2

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define RELAY2_PIN          13

								    #define RELAY2_PIN_INVERSE  0

								    #define LED1_PIN            16

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// WorkChoice ecoPlug

								// -----------------------------------------------------------------------------


								#elif defined(ECOPLUG)


								    #define MANUFACTURER        "WORKCHOICE"

								    #define DEVICE              "ECOPLUG"

								    #define BUTTON1_PIN         13

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          15

								    #define RELAY1_PIN_INVERSE  0

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// AI Thinker

								// -----------------------------------------------------------------------------


								#elif defined(AI_LIGHT)


								    #define MANUFACTURER        "AI_THINKER"

								    #define DEVICE              "AI_LIGHT"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_MY9192


								// -----------------------------------------------------------------------------

								// LED Controller

								// -----------------------------------------------------------------------------


								#elif defined(LED_CONTROLLER)


								    #define MANUFACTURER        "MAGIC_HOME"

								    #define DEVICE              "LED_CONTROLLER"

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_RGB


								    #undef RGBW_INVERSE_LOGIC

								    #undef RGBW_RED_PIN

								    #undef RGBW_GREEN_PIN

								    #undef RGBW_BLUE_PIN

								    #undef RGBW_WHITE_PIN


								    #define RGBW_INVERSE_LOGIC      1

								    #define RGBW_RED_PIN            14

								    #define RGBW_GREEN_PIN          5

								    #define RGBW_BLUE_PIN           12

								    #define RGBW_WHITE_PIN          13


								// -----------------------------------------------------------------------------

								// HUACANXING H801

								// -----------------------------------------------------------------------------


								#elif defined(H801)


								    #define MANUFACTURER        "HUACANXING"

								    #define DEVICE              "H801"

								    #define LED1_PIN            5

								    #define LED1_PIN_INVERSE    1

								    #define LED2_PIN            2

								    #define LED2_PIN_INVERSE    1

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_RGBW


								    #undef RGBW_INVERSE_LOGIC

								    #undef RGBW_RED_PIN

								    #undef RGBW_GREEN_PIN

								    #undef RGBW_BLUE_PIN

								    #undef RGBW_WHITE_PIN


								    #define RGBW_INVERSE_LOGIC      0

								    #define RGBW_RED_PIN            15

								    #define RGBW_GREEN_PIN          13

								    #define RGBW_BLUE_PIN           12

								    #define RGBW_WHITE_PIN          14

								    //#define RGBW_WHITE_PIN          4 <= warm white


								// -----------------------------------------------------------------------------

								// Jan Goedeke Wifi Relay

								// https://github.com/JanGoe/esp8266-wifi-relay

								// -----------------------------------------------------------------------------


								#elif defined(WIFI_RELAY_NC)


								    #define MANUFACTURER        "JAN_GOEDEKE"

								    #define DEVICE              "WIFI_RELAY_NC"

								    #define BUTTON1_PIN         12

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_PIN         13

								    #define BUTTON2_RELAY       2

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          2

								    #define RELAY1_PIN_INVERSE  1

								    #define RELAY2_PIN          14

								    #define RELAY2_PIN_INVERSE  1


								#elif defined(WIFI_RELAY_NO)


								    #define MANUFACTURER        "JAN_GOEDEKE"

								    #define DEVICE              "WIFI_RELAY_NO"

								    #define BUTTON1_PIN         12

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_PIN         13

								    #define BUTTON2_RELAY       2

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          2

								    #define RELAY1_PIN_INVERSE  0

								    #define RELAY2_PIN          14

								    #define RELAY2_PIN_INVERSE  0


								// -----------------------------------------------------------------------------

								// Jorge García Wifi+Relays Board Kit

								// https://www.tindie.com/products/jorgegarciadev/wifi--relays-board-kit

								// https://github.com/jorgegarciadev/wifikit

								// -----------------------------------------------------------------------------


								#elif defined(WIFI_RELAYS_BOARD_KIT)


								    #define MANUFACTURER        "JORGE_GARCIA"

								    #define DEVICE              "WIFI_RELAYS_BOARD_KIT"

								    #define RELAY1_PIN          0

								    #define RELAY1_PIN_INVERSE  1

								    #define RELAY2_PIN          2

								    #define RELAY2_PIN_INVERSE  1


								// -----------------------------------------------------------------------------

								// WiFi MQTT Relay / Thermostat

								// -----------------------------------------------------------------------------


								#elif defined(MQTT_RELAY)


								    #define MANUFACTURER        "OPENENERGYMONITOR"

								    #define DEVICE              "MQTT_RELAY"

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define RELAY1_PIN          12

								    #define RELAY1_PIN_INVERSE  0

								    #define LED1_PIN            16

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// Unknown hardware

								// -----------------------------------------------------------------------------


								#else

								    #error "UNSUPPORTED HARDWARE!"

								#endif


								// -----------------------------------------------------------------------------

								// Default values

								// -----------------------------------------------------------------------------


								#ifndef BUTTON1_PRESS

								#define BUTTON1_PRESS       BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON2_PRESS

								#define BUTTON2_PRESS       BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON3_PRESS

								#define BUTTON3_PRESS       BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON4_PRESS

								#define BUTTON4_PRESS       BUTTON_MODE_NONE

								#endif


								#ifndef BUTTON1_CLICK

								#define BUTTON1_CLICK       BUTTON_MODE_TOGGLE

								#endif

								#ifndef BUTTON2_CLICK

								#define BUTTON2_CLICK       BUTTON_MODE_TOGGLE

								#endif

								#ifndef BUTTON3_CLICK

								#define BUTTON3_CLICK       BUTTON_MODE_TOGGLE

								#endif

								#ifndef BUTTON4_CLICK

								#define BUTTON4_CLICK       BUTTON_MODE_TOGGLE

								#endif


								#ifndef BUTTON1_DBLCLICK

								#define BUTTON1_DBLCLICK    BUTTON_MODE_AP

								#endif

								#ifndef BUTTON2_DBLCLICK

								#define BUTTON2_DBLCLICK    BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON3_DBLCLICK

								#define BUTTON3_DBLCLICK    BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON4_DBLCLICK

								#define BUTTON4_DBLCLICK    BUTTON_MODE_NONE

								#endif


								#ifndef BUTTON1_LNGCLICK

								#define BUTTON1_LNGCLICK    BUTTON_MODE_RESET

								#endif

								#ifndef BUTTON2_LNGCLICK

								#define BUTTON2_LNGCLICK    BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON3_LNGCLICK

								#define BUTTON3_LNGCLICK    BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON4_LNGCLICK

								#define BUTTON4_LNGCLICK    BUTTON_MODE_NONE

								#endif


								#ifndef BUTTON1_LNGLNGCLICK

								#define BUTTON1_LNGLNGCLICK BUTTON_MODE_FACTORY

								#endif

								#ifndef BUTTON2_LNGLNGCLICK

								#define BUTTON2_LNGLNGCLICK BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON3_LNGLNGCLICK

								#define BUTTON3_LNGLNGCLICK BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON4_LNGLNGCLICK

								#define BUTTON4_LNGLNGCLICK BUTTON_MODE_NONE

								#endif


								#ifndef BUTTON1_RELAY

								#define BUTTON1_RELAY       0

								#endif

								#ifndef BUTTON2_RELAY

								#define BUTTON2_RELAY       0

								#endif

								#ifndef BUTTON3_RELAY

								#define BUTTON3_RELAY       0

								#endif

								#ifndef BUTTON4_RELAY

								#define BUTTON4_RELAY       0

								#endif


								#ifndef RELAY1_LED

								#define RELAY1_LED          0

								#endif

								#ifndef RELAY2_LED

								#define RELAY2_LED          0

								#endif

								#ifndef RELAY3_LED

								#define RELAY3_LED          0

								#endif

								#ifndef RELAY4_LED

								#define RELAY4_LED          0

								#endif


								#ifndef WIFI_LED

								#define WIFI_LED            1

								#endif


								// Needed for ESP8285 boards under Windows using PlatformIO (?)

								#ifndef BUTTON_PUSHBUTTON

								#define BUTTON_PUSHBUTTON   0

								#define BUTTON_SWITCH       1

								#define BUTTON_DEFAULT_HIGH 2

								#define BUTTON_SET_PULLUP   4

								#endif


								// Relay providers

								#ifndef RELAY_PROVIDER

								#define RELAY_PROVIDER          RELAY_PROVIDER_RELAY

								#endif


								// Light provider

								#ifndef LIGHT_PROVIDER

								#define LIGHT_PROVIDER          LIGHT_PROVIDER_NONE

								#endif