Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

896 lines
35 KiB

//------------------------------------------------------------------------------
// Do not change this file unless you know what you are doing
// Configuration settings are in the settings.h file
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
// GENERAL
//------------------------------------------------------------------------------
#define DEVICE_NAME MANUFACTURER "_" DEVICE // Concatenate both to get a unique device name
#define ADMIN_PASS "fibonacci" // Default password (WEB, OTA, WIFI)
#define USE_PASSWORD 1 // Insecurity caution! Disabling this will disable password querying completely.
#define LOOP_DELAY_TIME 10 // Delay for this millis in the main loop [0-250]
#define ARRAYINIT(type, name, ...) \
type name[] = {__VA_ARGS__};
//------------------------------------------------------------------------------
// ESPURNA CORE
//------------------------------------------------------------------------------
#ifdef ESPURNA_CORE
#define ALEXA_SUPPORT 0
#define SCHEDULER_SUPPORT 0
#define DOMOTICZ_SUPPORT 0
#define HOMEASSISTANT_SUPPORT 0
#define MQTT_SUPPORT 0
#define NTP_SUPPORT 0
#define WEB_SUPPORT 0
#define SENSOR_SUPPORT 0
#define I2C_SUPPORT 0
#endif
//------------------------------------------------------------------------------
// TELNET
//------------------------------------------------------------------------------
#ifndef TELNET_SUPPORT
#define TELNET_SUPPORT 1 // Enable telnet support by default (3.34Kb)
#endif
#ifndef TELNET_STA
#define TELNET_STA 0 // By default, disallow connections via STA interface
#endif
#define TELNET_PORT 23 // Port to listen to telnet clients
#define TELNET_MAX_CLIENTS 1 // Max number of concurrent telnet clients
//------------------------------------------------------------------------------
// DEBUG
//------------------------------------------------------------------------------
// Serial debug log
#ifndef DEBUG_SERIAL_SUPPORT
#define DEBUG_SERIAL_SUPPORT 1 // Enable serial debug log
#endif
#ifndef DEBUG_PORT
#define DEBUG_PORT Serial // Default debugging port
#endif
#ifndef SERIAL_BAUDRATE
#define SERIAL_BAUDRATE 115200 // Default baudrate
#endif
//------------------------------------------------------------------------------
// UDP debug log
// To receive the message son the destination computer use nc:
// nc -ul 8113
#ifndef DEBUG_UDP_SUPPORT
#define DEBUG_UDP_SUPPORT 0 // Enable UDP debug log
#endif
#define DEBUG_UDP_IP IPAddress(192, 168, 1, 100)
#define DEBUG_UDP_PORT 8113
//------------------------------------------------------------------------------
#ifndef DEBUG_TELNET_SUPPORT
#define DEBUG_TELNET_SUPPORT TELNET_SUPPORT // Enable telnet debug log if telnet is enabled too
#endif
#if DEBUG_TELNET_SUPPORT
#undef TELNET_SUPPORT
#define TELNET_SUPPORT 1
#endif
//------------------------------------------------------------------------------
// General debug options and macros
#define DEBUG_SUPPORT DEBUG_SERIAL_SUPPORT || DEBUG_UDP_SUPPORT || DEBUG_TELNET_SUPPORT
#if DEBUG_SUPPORT
#define DEBUG_MSG(...) debugSend(__VA_ARGS__)
#define DEBUG_MSG_P(...) debugSend_P(__VA_ARGS__)
#endif
#ifndef DEBUG_MSG
#define DEBUG_MSG(...)
#define DEBUG_MSG_P(...)
#endif
//------------------------------------------------------------------------------
// TERMINAL
//------------------------------------------------------------------------------
#ifndef TERMINAL_SUPPORT
#define TERMINAL_SUPPORT 1 // Enable terminal commands (0.97Kb)
#endif
//------------------------------------------------------------------------------
// SYSTEM CHECK
//------------------------------------------------------------------------------
#ifndef SYSTEM_CHECK_ENABLED
#define SYSTEM_CHECK_ENABLED 1 // Enable crash check by default
#endif
#define SYSTEM_CHECK_TIME 60000 // The system is considered stable after these many millis
#define SYSTEM_CHECK_MAX 5 // After this many crashes on boot
// the system is flagged as unstable
//------------------------------------------------------------------------------
// EEPROM
//------------------------------------------------------------------------------
#define EEPROM_SIZE 4096 // EEPROM size in bytes
#define EEPROM_RELAY_STATUS 0 // Address for the relay status (1 byte)
#define EEPROM_ENERGY_COUNT 1 // Address for the energy counter (4 bytes)
#define EEPROM_CUSTOM_RESET 5 // Address for the reset reason (1 byte)
#define EEPROM_CRASH_COUNTER 6 // Address for the crash counter (1 byte)
#define EEPROM_DATA_END 7 // End of custom EEPROM data block
//------------------------------------------------------------------------------
// HEARTBEAT
//------------------------------------------------------------------------------
#define HEARTBEAT_INTERVAL 300000 // Interval between heartbeat messages (in ms)
#define UPTIME_OVERFLOW 4294967295 // Uptime overflow value
// Topics that will be reported in heartbeat
#define HEARTBEAT_REPORT_STATUS 1
#define HEARTBEAT_REPORT_IP 1
#define HEARTBEAT_REPORT_MAC 1
#define HEARTBEAT_REPORT_RSSI 1
#define HEARTBEAT_REPORT_UPTIME 1
#define HEARTBEAT_REPORT_DATETIME 1
#define HEARTBEAT_REPORT_FREEHEAP 1
#define HEARTBEAT_REPORT_VCC 1
#define HEARTBEAT_REPORT_RELAY 1
#define HEARTBEAT_REPORT_LIGHT 1
#define HEARTBEAT_REPORT_HOSTNAME 1
#define HEARTBEAT_REPORT_APP 1
#define HEARTBEAT_REPORT_VERSION 1
#define HEARTBEAT_REPORT_INTERVAL 0
//------------------------------------------------------------------------------
// RESET
//------------------------------------------------------------------------------
#define CUSTOM_RESET_HARDWARE 1 // Reset from hardware button
#define CUSTOM_RESET_WEB 2 // Reset from web interface
#define CUSTOM_RESET_TERMINAL 3 // Reset from terminal
#define CUSTOM_RESET_MQTT 4 // Reset via MQTT
#define CUSTOM_RESET_RPC 5 // Reset via RPC (HTTP)
#define CUSTOM_RESET_OTA 6 // Reset after successful OTA update
#define CUSTOM_RESET_HTTP 7 // Reset via HTTP GET
#define CUSTOM_RESET_NOFUSS 8 // Reset after successful NOFUSS update
#define CUSTOM_RESET_UPGRADE 9 // Reset after update from web interface
#define CUSTOM_RESET_FACTORY 10 // Factory reset from terminal
#define CUSTOM_RESET_MAX 10
PROGMEM const char custom_reset_hardware[] = "Hardware button";
PROGMEM const char custom_reset_web[] = "Reboot from web interface";
PROGMEM const char custom_reset_terminal[] = "Reboot from terminal";
PROGMEM const char custom_reset_mqtt[] = "Reboot from MQTT";
PROGMEM const char custom_reset_rpc[] = "Reboot from RPC";
PROGMEM const char custom_reset_ota[] = "Reboot after successful OTA update";
PROGMEM const char custom_reset_http[] = "Reboot from HTTP";
PROGMEM const char custom_reset_nofuss[] = "Reboot after successful NoFUSS update";
PROGMEM const char custom_reset_upgrade[] = "Reboot after successful web update";
PROGMEM const char custom_reset_factory[] = "Factory reset";
PROGMEM const char* const custom_reset_string[] = {
custom_reset_hardware, custom_reset_web, custom_reset_terminal,
custom_reset_mqtt, custom_reset_rpc, custom_reset_ota,
custom_reset_http, custom_reset_nofuss, custom_reset_upgrade,
custom_reset_factory
};
//------------------------------------------------------------------------------
// BUTTON
//------------------------------------------------------------------------------
#ifndef BUTTON_DEBOUNCE_DELAY
#define BUTTON_DEBOUNCE_DELAY 50 // Debounce delay (ms)
#endif
#ifndef BUTTON_DBLCLICK_DELAY
#define BUTTON_DBLCLICK_DELAY 500 // Time in ms to wait for a second (or third...) click
#endif
#ifndef BUTTON_LNGCLICK_DELAY
#define BUTTON_LNGCLICK_DELAY 1000 // Time in ms holding the button down to get a long click
#endif
#ifndef BUTTON_LNGLNGCLICK_DELAY
#define BUTTON_LNGLNGCLICK_DELAY 10000 // Time in ms holding the button down to get a long-long click
#endif
#define BUTTON_EVENT_NONE 0
#define BUTTON_EVENT_PRESSED 1
#define BUTTON_EVENT_RELEASED 2
#define BUTTON_EVENT_CLICK 2
#define BUTTON_EVENT_DBLCLICK 3
#define BUTTON_EVENT_LNGCLICK 4
#define BUTTON_EVENT_LNGLNGCLICK 5
#define BUTTON_MODE_NONE 0
#define BUTTON_MODE_TOGGLE 1
#define BUTTON_MODE_ON 2
#define BUTTON_MODE_OFF 3
#define BUTTON_MODE_AP 4
#define BUTTON_MODE_RESET 5
#define BUTTON_MODE_PULSE 6
#define BUTTON_MODE_FACTORY 7
//------------------------------------------------------------------------------
// RELAY
//------------------------------------------------------------------------------
#define RELAY_BOOT_OFF 0
#define RELAY_BOOT_ON 1
#define RELAY_BOOT_SAME 2
#define RELAY_BOOT_TOGGLE 3
#define RELAY_TYPE_NORMAL 0
#define RELAY_TYPE_INVERSE 1
#define RELAY_TYPE_LATCHED 2
#define RELAY_SYNC_ANY 0
#define RELAY_SYNC_NONE_OR_ONE 1
#define RELAY_SYNC_ONE 2
#define RELAY_SYNC_SAME 3
#define RELAY_PULSE_NONE 0
#define RELAY_PULSE_OFF 1
#define RELAY_PULSE_ON 2
#define RELAY_PROVIDER_RELAY 0
#define RELAY_PROVIDER_DUAL 1
#define RELAY_PROVIDER_LIGHT 2
#define RELAY_PROVIDER_RFBRIDGE 3
// Default boot mode: 0 means OFF, 1 ON and 2 whatever was before
#define RELAY_BOOT_MODE RELAY_BOOT_OFF
// 0 means ANY, 1 zero or one and 2 one and only one
#define RELAY_SYNC RELAY_SYNC_ANY
// Default pulse mode: 0 means no pulses, 1 means normally off, 2 normally on
#define RELAY_PULSE_MODE RELAY_PULSE_NONE
// Default pulse time in seconds
#define RELAY_PULSE_TIME 1.0
// Relay requests flood protection window - in seconds
#define RELAY_FLOOD_WINDOW 3
// Allowed actual relay changes inside requests flood protection window
#define RELAY_FLOOD_CHANGES 5
// Pulse with in milliseconds for a latched relay
#define RELAY_LATCHING_PULSE 10
// Do not save relay state after these many milliseconds
#define RELAY_SAVE_DELAY 1000
//------------------------------------------------------------------------------
// I18N
//------------------------------------------------------------------------------
#define TMP_CELSIUS 0
#define TMP_FAHRENHEIT 1
//------------------------------------------------------------------------------
// LED
//------------------------------------------------------------------------------
#define LED_MODE_MQTT 0 // LED will be managed from MQTT (OFF by default)
#define LED_MODE_WIFI 1 // LED will blink according to the WIFI status
#define LED_MODE_FOLLOW 2 // LED will follow state of linked relay (check RELAY#_LED)
#define LED_MODE_FOLLOW_INVERSE 3 // LED will follow the opposite state of linked relay (check RELAY#_LED)
#define LED_MODE_FINDME 4 // LED will be ON if all relays are OFF
#define LED_MODE_MIXED 5 // A mixed between WIFI and FINDME
#define LED_MODE_ON 6 // LED always ON
#define LED_MODE_OFF 7 // LED always OFF
// -----------------------------------------------------------------------------
// WIFI
// -----------------------------------------------------------------------------
#define WIFI_CONNECT_TIMEOUT 60000 // Connecting timeout for WIFI in ms
#define WIFI_RECONNECT_INTERVAL 180000 // If could not connect to WIFI, retry after this time in ms
#define WIFI_MAX_NETWORKS 5 // Max number of WIFI connection configurations
#define WIFI_AP_MODE AP_MODE_ALONE
#define WIFI_SLEEP_ENABLED 1 // Enable WiFi light sleep
// Optional hardcoded configuration (up to 2 different networks)
//#define WIFI1_SSID "..."
//#define WIFI1_PASS "..."
//#define WIFI1_IP "192.168.1.201"
//#define WIFI1_GW "192.168.1.1"
//#define WIFI1_MASK "255.255.255.0"
//#define WIFI1_DNS "8.8.8.8"
//#define WIFI2_SSID "..."
//#define WIFI2_PASS "..."
#define WIFI_RSSI_1M -30 // Calibrate it with your router reading the RSSI at 1m
#define WIFI_PROPAGATION_CONST 4 // This is typically something between 2.7 to 4.3 (free space is 2)
// -----------------------------------------------------------------------------
// WEB
// -----------------------------------------------------------------------------
#ifndef WEB_SUPPORT
#define WEB_SUPPORT 1 // Enable web support (http, api, 121.65Kb)
#endif
#ifndef WEB_EMBEDDED
#define WEB_EMBEDDED 1 // Build the firmware with the web interface embedded in
#endif
// This is not working at the moment!!
// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0
#define WEB_SSL_ENABLED 0 // Use HTTPS web interface
#define WEB_MODE_NORMAL 0
#define WEB_MODE_PASSWORD 1
#define WEB_USERNAME "admin" // HTTP username
#define WEB_FORCE_PASS_CHANGE 1 // Force the user to change the password if default one
#define WEB_PORT 80 // HTTP port
// -----------------------------------------------------------------------------
// WEBSOCKETS
// -----------------------------------------------------------------------------
// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)
#define WS_BUFFER_SIZE 5 // Max number of secured websocket connections
#define WS_TIMEOUT 1800000 // Timeout for secured websocket
// -----------------------------------------------------------------------------
// API
// -----------------------------------------------------------------------------
// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)
#define API_ENABLED 0 // Do not enable API by default
#define API_BUFFER_SIZE 15 // Size of the buffer for HTTP GET API responses
#define API_REAL_TIME_VALUES 0 // Show filtered/median values by default (0 => median, 1 => real time)
// -----------------------------------------------------------------------------
// UI
// -----------------------------------------------------------------------------
#define UI_TAG_INPUT 0
#define UI_TAG_CHECKBOX 1
#define UI_TAG_SELECT 2
// -----------------------------------------------------------------------------
// MDNS / LLMNR / NETBIOS / SSDP
// -----------------------------------------------------------------------------
#ifndef MDNS_SERVER_SUPPORT
#define MDNS_SERVER_SUPPORT 1 // Publish services using mDNS by default (1.48Kb)
#endif
#ifndef MDNS_CLIENT_SUPPORT
#define MDNS_CLIENT_SUPPORT 0 // Resolve mDNS names (3.44Kb)
#endif
#ifndef LLMNR_SUPPORT
#define LLMNR_SUPPORT 0 // Publish device using LLMNR protocol by default (1.95Kb) - requires 2.4.0
#endif
#ifndef NETBIOS_SUPPORT
#define NETBIOS_SUPPORT 0 // Publish device using NetBIOS protocol by default (1.26Kb) - requires 2.4.0
#endif
#ifndef SSDP_SUPPORT
#define SSDP_SUPPORT 0 // Publish device using SSDP protocol by default (3.32Kb)
#endif
// -----------------------------------------------------------------------------
// SPIFFS
// -----------------------------------------------------------------------------
#ifndef SPIFFS_SUPPORT
#define SPIFFS_SUPPORT 0 // Do not add support for SPIFFS by default
#endif
// -----------------------------------------------------------------------------
// OTA
// -----------------------------------------------------------------------------
#define OTA_PORT 8266 // OTA port
// -----------------------------------------------------------------------------
// NOFUSS
// -----------------------------------------------------------------------------
#ifndef NOFUSS_SUPPORT
#define NOFUSS_SUPPORT 0 // Do not enable support for NoFuss by default (12.65Kb)
#endif
#define NOFUSS_ENABLED 0 // Do not perform NoFUSS updates by default
#define NOFUSS_SERVER "" // Default NoFuss Server
#define NOFUSS_INTERVAL 3600000 // Check for updates every hour
// -----------------------------------------------------------------------------
// MQTT
// -----------------------------------------------------------------------------
#ifndef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // MQTT support (22.38Kb async, 12.48Kb sync)
#endif
#ifndef MQTT_USE_ASYNC
#define MQTT_USE_ASYNC 1 // Use AysncMQTTClient (1) or PubSubClient (0)
#endif
// MQTT OVER SSL
// Using MQTT over SSL works pretty well but generates problems with the web interface.
// It could be a good idea to use it in conjuntion with WEB_SUPPORT=0.
// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0.
//
// You can use it with MQTT_USE_ASYNC=1 (AsyncMqttClient library)
// but you might experience hiccups on the web interface, so my recommendation is:
// WEB_SUPPORT=0
//
// If you use it with MQTT_USE_ASYNC=0 (PubSubClient library)
// you will have to disable all the modules that use ESPAsyncTCP, that is:
// ALEXA_SUPPORT=0, INFLUXDB_SUPPORT=0, TELNET_SUPPORT=0 and WEB_SUPPORT=0
//
// You will need the fingerprint for your MQTT server, example for CloudMQTT:
// $ echo -n | openssl s_client -connect m11.cloudmqtt.com:24055 > cloudmqtt.pem
// $ openssl x509 -noout -in cloudmqtt.pem -fingerprint -sha1
#define MQTT_SSL_ENABLED 0 // By default MQTT over SSL will not be enabled
#define MQTT_SSL_FINGERPRINT "" // SSL fingerprint of the server
#define MQTT_ENABLED 0 // Do not enable MQTT connection by default
#define MQTT_AUTOCONNECT 1 // If enabled and MDNS_SERVER_SUPPORT=1 will perform an autodiscover and
// autoconnect to the first MQTT broker found if none defined
#define MQTT_SERVER "" // Default MQTT broker address
#define MQTT_USER "" // Default MQTT broker usename
#define MQTT_PASS "" // Default MQTT broker password
#define MQTT_PORT 1883 // MQTT broker port
#define MQTT_TOPIC "{identifier}" // Default MQTT base topic
#define MQTT_RETAIN true // MQTT retain flag
#define MQTT_QOS 0 // MQTT QoS value for all messages
#define MQTT_KEEPALIVE 30 // MQTT keepalive value
#define MQTT_RECONNECT_DELAY_MIN 5000 // Try to reconnect in 5 seconds upon disconnection
#define MQTT_RECONNECT_DELAY_STEP 5000 // Increase the reconnect delay in 5 seconds after each failed attempt
#define MQTT_RECONNECT_DELAY_MAX 120000 // Set reconnect time to 2 minutes at most
#define MQTT_SKIP_RETAINED 1 // Skip retained messages on connection
#define MQTT_SKIP_TIME 1000 // Skip messages for 1 second anter connection
#define MQTT_USE_JSON 0 // Group messages in a JSON body
#define MQTT_USE_JSON_DELAY 100 // Wait this many ms before grouping messages
#define MQTT_QUEUE_MAX_SIZE 10 // Size of the MQTT queue when MQTT_USE_JSON is enabled
// These particles will be concatenated to the MQTT_TOPIC base to form the actual topic
#define MQTT_TOPIC_JSON "data"
#define MQTT_TOPIC_ACTION "action"
#define MQTT_TOPIC_RELAY "relay"
#define MQTT_TOPIC_LED "led"
#define MQTT_TOPIC_BUTTON "button"
#define MQTT_TOPIC_IP "ip"
#define MQTT_TOPIC_VERSION "version"
#define MQTT_TOPIC_UPTIME "uptime"
#define MQTT_TOPIC_DATETIME "datetime"
#define MQTT_TOPIC_FREEHEAP "freeheap"
#define MQTT_TOPIC_VCC "vcc"
#define MQTT_TOPIC_STATUS "status"
#define MQTT_TOPIC_MAC "mac"
#define MQTT_TOPIC_RSSI "rssi"
#define MQTT_TOPIC_APP "app"
#define MQTT_TOPIC_INTERVAL "interval"
#define MQTT_TOPIC_HOSTNAME "host"
#define MQTT_TOPIC_TIME "time"
#define MQTT_TOPIC_RFOUT "rfout"
#define MQTT_TOPIC_RFIN "rfin"
#define MQTT_TOPIC_RFLEARN "rflearn"
// Light module
#define MQTT_TOPIC_CHANNEL "channel"
#define MQTT_TOPIC_COLOR "color" // DEPRECATED, use RGB instead
#define MQTT_TOPIC_COLOR_RGB "rgb"
#define MQTT_TOPIC_COLOR_HSV "hsv"
#define MQTT_TOPIC_ANIM_MODE "anim_mode"
#define MQTT_TOPIC_ANIM_SPEED "anim_speed"
#define MQTT_TOPIC_BRIGHTNESS "brightness"
#define MQTT_TOPIC_MIRED "mired"
#define MQTT_TOPIC_KELVIN "kelvin"
#define MQTT_STATUS_ONLINE "1" // Value for the device ON message
#define MQTT_STATUS_OFFLINE "0" // Value for the device OFF message (will)
#define MQTT_ACTION_RESET "reboot" // RESET MQTT topic particle
// Internal MQTT events (do not change)
#define MQTT_CONNECT_EVENT 0
#define MQTT_DISCONNECT_EVENT 1
#define MQTT_MESSAGE_EVENT 2
// Custom get and set postfixes
// Use something like "/status" or "/set", with leading slash
// Since 1.9.0 the default value is "" for getter and "/set" for setter
#define MQTT_USE_GETTER ""
#define MQTT_USE_SETTER "/set"
// -----------------------------------------------------------------------------
// SETTINGS
// -----------------------------------------------------------------------------
#ifndef SETTINGS_AUTOSAVE
#define SETTINGS_AUTOSAVE 1 // Autosave settings o force manual commit
#endif
#define SETTINGS_MAX_LIST_COUNT 10 // Maximum index for settings lists
// -----------------------------------------------------------------------------
// LIGHT
// -----------------------------------------------------------------------------
// Available light providers (do not change)
#define LIGHT_PROVIDER_NONE 0
#define LIGHT_PROVIDER_MY92XX 1 // works with MY9291 and MY9231
#define LIGHT_PROVIDER_DIMMER 2
// LIGHT_PROVIDER_DIMMER can have from 1 to 5 different channels.
// They have to be defined for each device in the hardware.h file.
// If 3 or more channels first 3 will be considered RGB.
// Usual configurations are:
// 1 channels => W
// 2 channels => WW
// 3 channels => RGB
// 4 channels => RGBW
// 5 channels => RGBWW
#ifndef LIGHT_SAVE_ENABLED
#define LIGHT_SAVE_ENABLED 1 // Light channel values saved by default after each change
#endif
#define LIGHT_SAVE_DELAY 5 // Persist color after 5 seconds to avoid wearing out
#ifndef LIGHT_MAX_PWM
#if LIGHT_PROVIDER == LIGHT_PROVIDER_MY92XX
#define LIGHT_MAX_PWM 255
#endif
#if LIGHT_PROVIDER == LIGHT_PROVIDER_DIMMER
#define LIGHT_MAX_PWM 10000 // 5000 * 200ns => 1 kHz
#endif
#endif // LIGHT_MAX_PWM
#ifndef LIGHT_LIMIT_PWM
#define LIGHT_LIMIT_PWM LIGHT_MAX_PWM // Limit PWM to this value (prevent 100% power)
#endif
#ifndef LIGHT_MAX_VALUE
#define LIGHT_MAX_VALUE 255 // Maximum light value
#endif
#define LIGHT_MAX_BRIGHTNESS 255 // Maximun brightness value
#define LIGHT_STEP 32 // Step size
#define LIGHT_USE_COLOR 1 // Use 3 first channels as RGB
#define LIGHT_USE_WHITE 0 // Use white channel whenever RGB have the same value
#define LIGHT_USE_GAMMA 0 // Use gamma correction for color channels
#define LIGHT_USE_CSS 1 // Use CSS style to report colors (1=> "#FF0000", 0=> "255,0,0")
#define LIGHT_USE_RGB 0 // Use RGB color selector (1=> RGB, 0=> HSV)
#define LIGHT_USE_TRANSITIONS 1 // Transitions between colors
#define LIGHT_TRANSITION_STEP 10 // Time in millis between each transtion step
#define LIGHT_TRANSITION_STEPS 50 // Number of steps to acomplish transition
// -----------------------------------------------------------------------------
// DOMOTICZ
// -----------------------------------------------------------------------------
#ifndef DOMOTICZ_SUPPORT
#define DOMOTICZ_SUPPORT MQTT_SUPPORT // Build with domoticz (if MQTT) support (1.72Kb)
#endif
#if DOMOTICZ_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // If Domoticz enabled enable MQTT
#endif
#define DOMOTICZ_ENABLED 0 // Disable domoticz by default
#define DOMOTICZ_IN_TOPIC "domoticz/in" // Default subscription topic
#define DOMOTICZ_OUT_TOPIC "domoticz/out" // Default publication topic
// -----------------------------------------------------------------------------
// HOME ASSISTANT
// -----------------------------------------------------------------------------
#ifndef HOMEASSISTANT_SUPPORT
#define HOMEASSISTANT_SUPPORT MQTT_SUPPORT // Build with home assistant support (if MQTT, 1.64Kb)
#endif
#if HOMEASSISTANT_SUPPORT
#undef MQTT_SUPPORT
#define MQTT_SUPPORT 1 // If Home Assistant enabled enable MQTT
#endif
#define HOMEASSISTANT_ENABLED 0 // Integration not enabled by default
#define HOMEASSISTANT_PREFIX "homeassistant" // Default MQTT prefix
// -----------------------------------------------------------------------------
// INFLUXDB
// -----------------------------------------------------------------------------
#ifndef INFLUXDB_SUPPORT
#define INFLUXDB_SUPPORT 0 // Enable InfluxDB support by default (4.38Kb)
#endif
#define INFLUXDB_ENABLED 0 // InfluxDB disabled by default
#define INFLUXDB_HOST "" // Default server
#define INFLUXDB_PORT 8086 // Default InfluxDB port
#define INFLUXDB_DATABASE "" // Default database
#define INFLUXDB_USERNAME "" // Default username
#define INFLUXDB_PASSWORD "" // Default password
// -----------------------------------------------------------------------------
// THINGSPEAK
// -----------------------------------------------------------------------------
#ifndef THINGSPEAK_SUPPORT
#define THINGSPEAK_SUPPORT 1 // Enable Thingspeak support by default (2.56Kb)
#endif
#define THINGSPEAK_ENABLED 0 // Thingspeak disabled by default
#define THINGSPEAK_APIKEY "" // Default API KEY
#define THINGSPEAK_USE_ASYNC 1 // Use AsyncClient instead of WiFiClientSecure
// THINGSPEAK OVER SSL
// Using THINGSPEAK over SSL works well but generates problems with the web interface,
// so you should compile it with WEB_SUPPORT to 0.
// When THINGSPEAK_USE_ASYNC is 1, requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0.
#define THINGSPEAK_USE_SSL 0 // Use secure connection
#define THINGSPEAK_FINGERPRINT "78 60 18 44 81 35 BF DF 77 84 D4 0A 22 0D 9B 4E 6C DC 57 2C"
#define THINGSPEAK_HOST "api.thingspeak.com"
#if THINGSPEAK_USE_SSL
#define THINGSPEAK_PORT 443
#else
#define THINGSPEAK_PORT 80
#endif
#define THINGSPEAK_URL "/update"
#define THINGSPEAK_MIN_INTERVAL 15000 // Minimum interval between POSTs (in millis)
#ifndef ASYNC_TCP_SSL_ENABLED
#if THINGSPEAK_USE_SSL && THINGSPEAK_USE_ASYNC
#undef THINGSPEAK_SUPPORT // Thingspeak in ASYNC mode requires ASYNC_TCP_SSL_ENABLED
#endif
#endif
// -----------------------------------------------------------------------------
// SCHEDULER
// -----------------------------------------------------------------------------
#ifndef SCHEDULER_SUPPORT
#define SCHEDULER_SUPPORT 1 // Enable scheduler (1.77Kb)
#endif
#if SCHEDULER_SUPPORT
#undef NTP_SUPPORT
#define NTP_SUPPORT 1 // Scheduler needs NTP
#endif
#define SCHEDULER_UPDATE_SEC 5 // Scheduler perform switch at hh:mm:05
#define SCHEDULER_MAX_SCHEDULES 10 // Max schedules alowed
// -----------------------------------------------------------------------------
// NTP
// -----------------------------------------------------------------------------
#ifndef NTP_SUPPORT
#define NTP_SUPPORT 1 // Build with NTP support by default (6.78Kb)
#endif
#define NTP_SERVER "pool.ntp.org" // Default NTP server
#define NTP_TIME_OFFSET 1 // Default timezone offset (GMT+1)
#define NTP_DAY_LIGHT true // Enable daylight time saving by default
#define NTP_UPDATE_INTERVAL 1800 // NTP check every 30 minutes
// -----------------------------------------------------------------------------
// ALEXA
// -----------------------------------------------------------------------------
// This setting defines whether Alexa support should be built into the firmware
#ifndef ALEXA_SUPPORT
#define ALEXA_SUPPORT 1 // Enable Alexa support by default (9.5Kb)
#endif
// This is default value for the alexaEnabled setting that defines whether
// this device should be discoberable and respond to Alexa commands.
// Both ALEXA_SUPPORT and alexaEnabled should be 1 for Alexa support to work.
#define ALEXA_ENABLED 1
// -----------------------------------------------------------------------------
// RFBRIDGE
// -----------------------------------------------------------------------------
#define RF_SEND_TIMES 4 // How many times to send the message
#define RF_SEND_DELAY 500 // Interval between sendings in ms
#define RF_RECEIVE_DELAY 500 // Interval between recieving in ms (avoid debouncing)
// -----------------------------------------------------------------------------
// IR
// -----------------------------------------------------------------------------
#ifndef IR_SUPPORT
#define IR_SUPPORT 0 // Do not build with IR support by default (10.25Kb)
#endif
#ifndef IR_PIN
#define IR_PIN 4 // IR LED
#endif
// 24 Buttons Set of the IR Remote
#ifndef IR_BUTTON_SET
#define IR_BUTTON_SET 1 // IR button set to use (see below)
#endif
// IR Button modes
#define IR_BUTTON_MODE_NONE 0
#define IR_BUTTON_MODE_RGB 1
#define IR_BUTTON_MODE_HSV 2
#define IR_BUTTON_MODE_BRIGHTER 3
#define IR_BUTTON_MODE_STATE 4
#define IR_BUTTON_MODE_EFFECT 5
#define LIGHT_EFFECT_SOLID 0
#define LIGHT_EFFECT_FLASH 1
#define LIGHT_EFFECT_STROBE 2
#define LIGHT_EFFECT_FADE 3
#define LIGHT_EFFECT_SMOOTH 4
//Remote Buttons SET 1 (for the original Remote shipped with the controller)
#if IR_SUPPORT
#if IR_BUTTON_SET == 1
/*
+------+------+------+------+
| UP | Down | OFF | ON |
+------+------+------+------+
| R | G | B | W |
+------+------+------+------+
| 1 | 2 | 3 |FLASH |
+------+------+------+------+
| 4 | 5 | 6 |STROBE|
+------+------+------+------+
| 7 | 8 | 9 | FADE |
+------+------+------+------+
| 10 | 11 | 12 |SMOOTH|
+------+------+------+------+
*/
#define IR_BUTTON_COUNT 24
const unsigned long IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = {
{ 0xFF906F, IR_BUTTON_MODE_BRIGHTER, 1 },
{ 0xFFB847, IR_BUTTON_MODE_BRIGHTER, 0 },
{ 0xFFF807, IR_BUTTON_MODE_STATE, 0 },
{ 0xFFB04F, IR_BUTTON_MODE_STATE, 1 },
{ 0xFF9867, IR_BUTTON_MODE_RGB, 0xFF0000 },
{ 0xFFD827, IR_BUTTON_MODE_RGB, 0x00FF00 },
{ 0xFF8877, IR_BUTTON_MODE_RGB, 0x0000FF },
{ 0xFFA857, IR_BUTTON_MODE_RGB, 0xFFFFFF },
{ 0xFFE817, IR_BUTTON_MODE_RGB, 0xD13A01 },
{ 0xFF48B7, IR_BUTTON_MODE_RGB, 0x00E644 },
{ 0xFF6897, IR_BUTTON_MODE_RGB, 0x0040A7 },
{ 0xFFB24D, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FLASH },
{ 0xFF02FD, IR_BUTTON_MODE_RGB, 0xE96F2A },
{ 0xFF32CD, IR_BUTTON_MODE_RGB, 0x00BEBF },
{ 0xFF20DF, IR_BUTTON_MODE_RGB, 0x56406F },
{ 0xFF00FF, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_STROBE },
{ 0xFF50AF, IR_BUTTON_MODE_RGB, 0xEE9819 },
{ 0xFF7887, IR_BUTTON_MODE_RGB, 0x00799A },
{ 0xFF708F, IR_BUTTON_MODE_RGB, 0x944E80 },
{ 0xFF58A7, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FADE },
{ 0xFF38C7, IR_BUTTON_MODE_RGB, 0xFFFF00 },
{ 0xFF28D7, IR_BUTTON_MODE_RGB, 0x0060A1 },
{ 0xFFF00F, IR_BUTTON_MODE_RGB, 0xEF45AD },
{ 0xFF30CF, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_SMOOTH }
};
#endif
//Remote Buttons SET 2 (another identical IR Remote shipped with another controller)
#if IR_BUTTON_SET == 2
/*
+------+------+------+------+
| UP | Down | OFF | ON |
+------+------+------+------+
| R | G | B | W |
+------+------+------+------+
| 1 | 2 | 3 |FLASH |
+------+------+------+------+
| 4 | 5 | 6 |STROBE|
+------+------+------+------+
| 7 | 8 | 9 | FADE |
+------+------+------+------+
| 10 | 11 | 12 |SMOOTH|
+------+------+------+------+
*/
#define IR_BUTTON_COUNT 24
const unsigned long IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = {
{ 0xFF00FF, IR_BUTTON_MODE_BRIGHTER, 1 },
{ 0xFF807F, IR_BUTTON_MODE_BRIGHTER, 0 },
{ 0xFF40BF, IR_BUTTON_MODE_STATE, 0 },
{ 0xFFC03F, IR_BUTTON_MODE_STATE, 1 },
{ 0xFF20DF, IR_BUTTON_MODE_RGB, 0xFF0000 },
{ 0xFFA05F, IR_BUTTON_MODE_RGB, 0x00FF00 },
{ 0xFF609F, IR_BUTTON_MODE_RGB, 0x0000FF },
{ 0xFFE01F, IR_BUTTON_MODE_RGB, 0xFFFFFF },
{ 0xFF10EF, IR_BUTTON_MODE_RGB, 0xD13A01 },
{ 0xFF906F, IR_BUTTON_MODE_RGB, 0x00E644 },
{ 0xFF50AF, IR_BUTTON_MODE_RGB, 0x0040A7 },
{ 0xFFD02F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FLASH },
{ 0xFF30CF, IR_BUTTON_MODE_RGB, 0xE96F2A },
{ 0xFFB04F, IR_BUTTON_MODE_RGB, 0x00BEBF },
{ 0xFF708F, IR_BUTTON_MODE_RGB, 0x56406F },
{ 0xFFF00F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_STROBE },
{ 0xFF08F7, IR_BUTTON_MODE_RGB, 0xEE9819 },
{ 0xFF8877, IR_BUTTON_MODE_RGB, 0x00799A },
{ 0xFF48B7, IR_BUTTON_MODE_RGB, 0x944E80 },
{ 0xFFC837, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FADE },
{ 0xFF28D7, IR_BUTTON_MODE_RGB, 0xFFFF00 },
{ 0xFFA857, IR_BUTTON_MODE_RGB, 0x0060A1 },
{ 0xFF6897, IR_BUTTON_MODE_RGB, 0xEF45AD },
{ 0xFFE817, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_SMOOTH }
};
#endif
#endif // IR_SUPPORT
//--------------------------------------------------------------------------------
// Custom RF module
// Check http://tinkerman.cat/adding-rf-to-a-non-rf-itead-sonoff/
// Enable support by passing RF_SUPPORT=1 build flag
//--------------------------------------------------------------------------------
#ifndef RF_SUPPORT
#define RF_SUPPORT 0
#endif
#ifndef RF_PIN
#define RF_PIN 14
#endif
#define RF_CHANNEL 31
#define RF_DEVICE 1