You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
203 lines
5.8 KiB
203 lines
5.8 KiB
/*
|
|
|
|
EMON MODULE
|
|
|
|
Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
|
|
|
|
*/
|
|
|
|
#if ENABLE_EMON
|
|
|
|
#include <EmonLiteESP.h>
|
|
#include "brzo_i2c.h"
|
|
#include <EEPROM.h>
|
|
|
|
// ADC121 Registers
|
|
#define ADC121_REG_RESULT 0x00
|
|
#define ADC121_REG_ALERT 0x01
|
|
#define ADC121_REG_CONFIG 0x02
|
|
#define ADC121_REG_LIMITL 0x03
|
|
#define ADC121_REG_LIMITH 0x04
|
|
#define ADC121_REG_HYST 0x05
|
|
#define ADC121_REG_CONVL 0x06
|
|
#define ADC121_REG_CONVH 0x07
|
|
|
|
EmonLiteESP emon;
|
|
double _current = 0;
|
|
unsigned int _power = 0;
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// Provider
|
|
// -----------------------------------------------------------------------------
|
|
|
|
unsigned int currentCallback() {
|
|
|
|
#if EMON_PROVIDER == EMON_ANALOG_PROVIDER
|
|
return analogRead(EMON_CURRENT_PIN);
|
|
#endif
|
|
|
|
#if EMON_PROVIDER == EMON_ADC121_PROVIDER
|
|
uint8_t buffer[2];
|
|
brzo_i2c_start_transaction(EMON_ADC121_ADDRESS, I2C_SCL_FREQUENCY);
|
|
buffer[0] = ADC121_REG_RESULT;
|
|
brzo_i2c_write(buffer, 1, false);
|
|
brzo_i2c_read(buffer, 2, false);
|
|
brzo_i2c_end_transaction();
|
|
unsigned int value;
|
|
value = (buffer[0] & 0x0F) << 8;
|
|
value |= buffer[1];
|
|
return value;
|
|
#endif
|
|
|
|
}
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// EMON
|
|
// -----------------------------------------------------------------------------
|
|
|
|
void setCurrentRatio(float value) {
|
|
emon.setCurrentRatio(value);
|
|
}
|
|
|
|
unsigned int getPower() {
|
|
return _power;
|
|
}
|
|
|
|
double getCurrent() {
|
|
return _current;
|
|
}
|
|
|
|
void powerMonitorSetup() {
|
|
|
|
// backwards compatibility
|
|
String tmp;
|
|
tmp = getSetting("pwMainsVoltage", EMON_MAINS_VOLTAGE);
|
|
setSetting("emonMains", tmp);
|
|
delSetting("pwMainsVoltage");
|
|
tmp = getSetting("pwCurrentRatio", EMON_CURRENT_RATIO);
|
|
setSetting("emonRatio", tmp);
|
|
delSetting("pwCurrentRatio");
|
|
|
|
emon.initCurrent(
|
|
currentCallback,
|
|
EMON_ADC_BITS,
|
|
EMON_REFERENCE_VOLTAGE,
|
|
getSetting("emonRatio", EMON_CURRENT_RATIO).toFloat()
|
|
);
|
|
emon.setPrecision(EMON_CURRENT_PRECISION);
|
|
|
|
#if EMON_PROVIDER == EMON_ADC121_PROVIDER
|
|
uint8_t buffer[2];
|
|
buffer[0] = ADC121_REG_CONFIG;
|
|
buffer[1] = 0x00;
|
|
brzo_i2c_start_transaction(EMON_ADC121_ADDRESS, I2C_SCL_FREQUENCY);
|
|
brzo_i2c_write(buffer, 2, false);
|
|
brzo_i2c_end_transaction();
|
|
#endif
|
|
|
|
apiRegister("/api/power", "power", [](char * buffer, size_t len) {
|
|
snprintf(buffer, len, "%d", _power);
|
|
});
|
|
|
|
}
|
|
|
|
void powerMonitorLoop() {
|
|
|
|
static unsigned long next_measurement = millis();
|
|
static bool warmup = true;
|
|
static byte measurements = 0;
|
|
static double max = 0;
|
|
static double min = 0;
|
|
static double sum = 0;
|
|
|
|
if (!mqttConnected()) return;
|
|
|
|
if (warmup) {
|
|
warmup = false;
|
|
emon.warmup();
|
|
}
|
|
|
|
if (millis() > next_measurement) {
|
|
|
|
// Safety check: do not read current if relay is OFF
|
|
// You could be monitoring another line with the current clamp...
|
|
//if (!relayStatus(0)) {
|
|
// _current = 0;
|
|
//} else {
|
|
_current = emon.getCurrent(EMON_SAMPLES);
|
|
_current -= EMON_CURRENT_OFFSET;
|
|
if (_current < 0) _current = 0;
|
|
//}
|
|
|
|
if (measurements == 0) {
|
|
max = min = _current;
|
|
} else {
|
|
if (_current > max) max = _current;
|
|
if (_current < min) min = _current;
|
|
}
|
|
sum += _current;
|
|
++measurements;
|
|
|
|
float mainsVoltage = getSetting("emonMains", EMON_MAINS_VOLTAGE).toFloat();
|
|
|
|
char current[6];
|
|
dtostrf(_current, 5, 2, current);
|
|
DEBUG_MSG("[ENERGY] Current: %sA\n", current);
|
|
DEBUG_MSG("[ENERGY] Power: %dW\n", int(_current * mainsVoltage));
|
|
|
|
// Update websocket clients
|
|
char text[64];
|
|
sprintf_P(text, PSTR("{\"emonVisible\": 1, \"powApparentPower\": %d}"), int(_current * mainsVoltage));
|
|
wsSend(text);
|
|
|
|
// Send MQTT messages averaged every EMON_MEASUREMENTS
|
|
if (measurements == EMON_MEASUREMENTS) {
|
|
|
|
// Calculate average current (removing max and min values) and create C-string
|
|
double average = (sum - max - min) / (measurements - 2);
|
|
dtostrf(average, 5, 2, current);
|
|
char *c = current;
|
|
while ((unsigned char) *c == ' ') ++c;
|
|
|
|
// Calculate average apparent power from current and create C-string
|
|
_power = (int) (current_avgd * mainsVoltage);
|
|
char power[6];
|
|
snprintf(power, 6, "%d", _power);
|
|
|
|
// Calculate energy increment (ppower times time) and create C-string
|
|
double energy_inc = (double) _power * EMON_INTERVAL * EMON_MEASUREMENTS / 1000.0 / 3600.0;
|
|
char energy_buf[11];
|
|
dtostrf(energy_inc, 11, 3, energy_buf);
|
|
char *e = energy_buf;
|
|
while ((unsigned char) *e == ' ') ++e;
|
|
|
|
// Report values to MQTT broker
|
|
mqttSend(getSetting("emonPowerTopic", EMON_APOWER_TOPIC).c_str(), power);
|
|
mqttSend(getSetting("emonCurrTopic", EMON_CURRENT_TOPIC).c_str(), c);
|
|
mqttSend(getSetting("emonEnergyTopic", EMON_ENERGY_TOPIC).c_str(), e);
|
|
|
|
// Report values to Domoticz
|
|
#if ENABLE_DOMOTICZ
|
|
{
|
|
char buffer[20];
|
|
snprintf(buffer, 20, "%s;%s", power, e);
|
|
domoticzSend("dczPowIdx", 0, buffer);
|
|
snprintf(buffer, 20, "%s", e);
|
|
domoticzSend("dczEnergyIdx", 0, buffer);
|
|
snprintf(buffer, 20, "%s", c);
|
|
domoticzSend("dczCurrentIdx", 0, buffer);
|
|
}
|
|
#endif
|
|
|
|
// Reset counters
|
|
sum = measurements = 0;
|
|
|
|
}
|
|
|
|
next_measurement += EMON_INTERVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|