mh
/
mhsw-espurna


								//------------------------------------------------------------------------------

								// Do not change this file unless you know what you are doing

								// Configuration settings are in the settings.h file

								//------------------------------------------------------------------------------


								//------------------------------------------------------------------------------

								// GENERAL

								//------------------------------------------------------------------------------


								#define DEVICE_NAME             MANUFACTURER "_" DEVICE     // Concatenate both to get a unique device name

								#define ADMIN_PASS              "fibonacci" // Default password (WEB, OTA, WIFI)

								#define USE_PASSWORD            1           // Insecurity caution! Disabling this will disable password querying completely.

								#define LOOP_DELAY_TIME         10          // Delay for this millis in the main loop [0-250]


								#define ARRAYINIT(type, name, ...) \

								    type name[] = {__VA_ARGS__};


								//------------------------------------------------------------------------------

								// TELNET

								//------------------------------------------------------------------------------


								#ifndef TELNET_SUPPORT

								#define TELNET_SUPPORT          1               // Enable telnet support by default (3.34Kb)

								#endif


								#ifndef TELNET_STA

								#define TELNET_STA              0               // By default, disallow connections via STA interface

								#endif


								#define TELNET_PORT             23              // Port to listen to telnet clients

								#define TELNET_MAX_CLIENTS      1               // Max number of concurrent telnet clients


								//------------------------------------------------------------------------------

								// DEBUG

								//------------------------------------------------------------------------------


								// Serial debug log


								#ifndef DEBUG_SERIAL_SUPPORT

								#define DEBUG_SERIAL_SUPPORT    1               // Enable serial debug log

								#endif


								#ifndef DEBUG_PORT

								#define DEBUG_PORT              Serial          // Default debugging port

								#endif


								#ifndef SERIAL_BAUDRATE

								#define SERIAL_BAUDRATE         115200          // Default baudrate

								#endif


								#ifndef DEBUG_ADD_TIMESTAMP

								#define DEBUG_ADD_TIMESTAMP     1               // Add timestamp to debug messages

								                                                // (in millis overflowing every 1000 seconds)

								#endif


								// Second serial port (used for RX)


								#ifndef SERIAL_RX_ENABLED

								#define SERIAL_RX_ENABLED       0               // Secondary serial port for RX

								#endif


								#ifndef SERIAL_RX_PORT

								#define SERIAL_RX_PORT          Serial			// This setting is usually defined

								                                            // in the hardware.h file for those

								                                            // boards that require it

								#endif


								#ifndef SERIAL_RX_BAUDRATE

								#define SERIAL_RX_BAUDRATE      115200          // Default baudrate

								#endif


								//------------------------------------------------------------------------------


								// UDP debug log

								// To receive the message son the destination computer use nc:

								// nc -ul 8113


								#ifndef DEBUG_UDP_SUPPORT

								#define DEBUG_UDP_SUPPORT       0               // Enable UDP debug log

								#endif

								#define DEBUG_UDP_IP            IPAddress(192, 168, 1, 100)

								#define DEBUG_UDP_PORT          8113


								//------------------------------------------------------------------------------


								#ifndef DEBUG_TELNET_SUPPORT

								#define DEBUG_TELNET_SUPPORT    TELNET_SUPPORT  // Enable telnet debug log if telnet is enabled too

								#endif


								#if DEBUG_TELNET_SUPPORT

								#undef TELNET_SUPPORT

								#define TELNET_SUPPORT          1

								#endif


								//------------------------------------------------------------------------------


								#ifndef DEBUG_WEB_SUPPORT

								#define DEBUG_WEB_SUPPORT       WEB_SUPPORT  // Enable web debug log if web is enabled too

								#endif


								#if DEBUG_WEB_SUPPORT

								#undef WEB_SUPPORT

								#define WEB_SUPPORT             1           // Chicken and egg :)

								#endif


								#define DEBUG_WEB_ENABLED       1           // Enable debug output by default


								//------------------------------------------------------------------------------


								// General debug options and macros

								#define DEBUG_SUPPORT           DEBUG_SERIAL_SUPPORT || DEBUG_UDP_SUPPORT || DEBUG_TELNET_SUPPORT


								#if DEBUG_SUPPORT

								    #define DEBUG_MSG(...) debugSend(__VA_ARGS__)

								    #define DEBUG_MSG_P(...) debugSend_P(__VA_ARGS__)

								#endif


								#ifndef DEBUG_MSG

								    #define DEBUG_MSG(...)

								    #define DEBUG_MSG_P(...)

								#endif


								//------------------------------------------------------------------------------

								// TERMINAL

								//------------------------------------------------------------------------------


								#ifndef TERMINAL_SUPPORT

								#define TERMINAL_SUPPORT         1              // Enable terminal commands (0.97Kb)

								#endif


								#define TERMINAL_BUFFER_SIZE     128            // Max size for commands commands


								//------------------------------------------------------------------------------

								// SYSTEM CHECK

								//------------------------------------------------------------------------------


								#ifndef SYSTEM_CHECK_ENABLED

								#define SYSTEM_CHECK_ENABLED    1               // Enable crash check by default

								#endif


								#define SYSTEM_CHECK_TIME       60000           // The system is considered stable after these many millis

								#ifndef SYSTEM_CHECK_MAX

								#define SYSTEM_CHECK_MAX        5               // After this many crashes on boot

								                                                // the system is flagged as unstable

								#endif


								//------------------------------------------------------------------------------

								// EEPROM

								//------------------------------------------------------------------------------


								#define EEPROM_SIZE             4096            // EEPROM size in bytes

								#define EEPROM_RELAY_STATUS     0               // Address for the relay status (1 byte)

								#define EEPROM_ENERGY_COUNT     1               // Address for the energy counter (4 bytes)

								#define EEPROM_CUSTOM_RESET     5               // Address for the reset reason (1 byte)

								#define EEPROM_CRASH_COUNTER    6               // Address for the crash counter (1 byte)

								#define EEPROM_MESSAGE_ID       7               // Address for the MQTT message id (4 bytes)

								#define EEPROM_DATA_END         11              // End of custom EEPROM data block


								//------------------------------------------------------------------------------

								// HEARTBEAT

								//------------------------------------------------------------------------------


								#ifndef HEARTBEAT_ENABLED

								#define HEARTBEAT_ENABLED           1

								#endif


								#define HEARTBEAT_INTERVAL          300000      // Interval between heartbeat messages (in ms)

								#define UPTIME_OVERFLOW             4294967295  // Uptime overflow value


								// Topics that will be reported in heartbeat

								#define HEARTBEAT_REPORT_STATUS     1

								#define HEARTBEAT_REPORT_IP         1

								#define HEARTBEAT_REPORT_MAC        1

								#define HEARTBEAT_REPORT_RSSI       1

								#define HEARTBEAT_REPORT_UPTIME     1

								#define HEARTBEAT_REPORT_DATETIME   1

								#define HEARTBEAT_REPORT_FREEHEAP   1

								#define HEARTBEAT_REPORT_VCC        1

								#define HEARTBEAT_REPORT_RELAY      1

								#define HEARTBEAT_REPORT_LIGHT      1

								#define HEARTBEAT_REPORT_HOSTNAME   1

								#define HEARTBEAT_REPORT_APP        1

								#define HEARTBEAT_REPORT_VERSION    1

								#define HEARTBEAT_REPORT_INTERVAL   0


								//------------------------------------------------------------------------------

								// Load average

								//------------------------------------------------------------------------------

								#define LOADAVG_INTERVAL        30000   // Interval between calculating load average (in ms)

								#define LOADAVG_REPORT          1       // Should we report Load average over MQTT?


								//------------------------------------------------------------------------------

								// RESET

								//------------------------------------------------------------------------------


								#define CUSTOM_RESET_HARDWARE   1               // Reset from hardware button

								#define CUSTOM_RESET_WEB        2               // Reset from web interface

								#define CUSTOM_RESET_TERMINAL   3               // Reset from terminal

								#define CUSTOM_RESET_MQTT       4               // Reset via MQTT

								#define CUSTOM_RESET_RPC        5               // Reset via RPC (HTTP)

								#define CUSTOM_RESET_OTA        6               // Reset after successful OTA update

								#define CUSTOM_RESET_HTTP       7               // Reset via HTTP GET

								#define CUSTOM_RESET_NOFUSS     8               // Reset after successful NOFUSS update

								#define CUSTOM_RESET_UPGRADE    9               // Reset after update from web interface

								#define CUSTOM_RESET_FACTORY    10              // Factory reset from terminal


								#define CUSTOM_RESET_MAX        10


								PROGMEM const char custom_reset_hardware[] = "Hardware button";

								PROGMEM const char custom_reset_web[] = "Reboot from web interface";

								PROGMEM const char custom_reset_terminal[] = "Reboot from terminal";

								PROGMEM const char custom_reset_mqtt[] = "Reboot from MQTT";

								PROGMEM const char custom_reset_rpc[] = "Reboot from RPC";

								PROGMEM const char custom_reset_ota[] = "Reboot after successful OTA update";

								PROGMEM const char custom_reset_http[] = "Reboot from HTTP";

								PROGMEM const char custom_reset_nofuss[] = "Reboot after successful NoFUSS update";

								PROGMEM const char custom_reset_upgrade[] = "Reboot after successful web update";

								PROGMEM const char custom_reset_factory[] = "Factory reset";

								PROGMEM const char* const custom_reset_string[] = {

								    custom_reset_hardware, custom_reset_web, custom_reset_terminal,

								    custom_reset_mqtt, custom_reset_rpc, custom_reset_ota,

								    custom_reset_http, custom_reset_nofuss, custom_reset_upgrade,

								    custom_reset_factory

								};


								//------------------------------------------------------------------------------

								// BUTTON

								//------------------------------------------------------------------------------


								#ifndef BUTTON_DEBOUNCE_DELAY

								#define BUTTON_DEBOUNCE_DELAY       50          // Debounce delay (ms)

								#endif


								#ifndef BUTTON_DBLCLICK_DELAY

								#define BUTTON_DBLCLICK_DELAY       500         // Time in ms to wait for a second (or third...) click

								#endif


								#ifndef BUTTON_LNGCLICK_DELAY

								#define BUTTON_LNGCLICK_DELAY       1000        // Time in ms holding the button down to get a long click

								#endif


								#ifndef BUTTON_LNGLNGCLICK_DELAY

								#define BUTTON_LNGLNGCLICK_DELAY    10000       // Time in ms holding the button down to get a long-long click

								#endif


								#define BUTTON_EVENT_NONE           0

								#define BUTTON_EVENT_PRESSED        1

								#define BUTTON_EVENT_RELEASED       2

								#define BUTTON_EVENT_CLICK          2

								#define BUTTON_EVENT_DBLCLICK       3

								#define BUTTON_EVENT_LNGCLICK       4

								#define BUTTON_EVENT_LNGLNGCLICK    5


								#define BUTTON_MODE_NONE            0

								#define BUTTON_MODE_TOGGLE          1

								#define BUTTON_MODE_ON              2

								#define BUTTON_MODE_OFF             3

								#define BUTTON_MODE_AP              4

								#define BUTTON_MODE_RESET           5

								#define BUTTON_MODE_PULSE           6

								#define BUTTON_MODE_FACTORY         7


								//------------------------------------------------------------------------------

								// RELAY

								//------------------------------------------------------------------------------


								#define RELAY_BOOT_OFF              0

								#define RELAY_BOOT_ON               1

								#define RELAY_BOOT_SAME             2

								#define RELAY_BOOT_TOGGLE           3


								#define RELAY_TYPE_NORMAL           0

								#define RELAY_TYPE_INVERSE          1

								#define RELAY_TYPE_LATCHED          2

								#define RELAY_TYPE_LATCHED_INVERSE  3


								#define RELAY_SYNC_ANY              0

								#define RELAY_SYNC_NONE_OR_ONE      1

								#define RELAY_SYNC_ONE              2

								#define RELAY_SYNC_SAME             3


								#define RELAY_PULSE_NONE            0

								#define RELAY_PULSE_OFF             1

								#define RELAY_PULSE_ON              2


								#define RELAY_PROVIDER_RELAY        0

								#define RELAY_PROVIDER_DUAL         1

								#define RELAY_PROVIDER_LIGHT        2

								#define RELAY_PROVIDER_RFBRIDGE     3

								#define RELAY_PROVIDER_STM          4


								// Default boot mode: 0 means OFF, 1 ON and 2 whatever was before

								#define RELAY_BOOT_MODE             RELAY_BOOT_OFF


								// 0 means ANY, 1 zero or one and 2 one and only one

								#define RELAY_SYNC                  RELAY_SYNC_ANY


								// Default pulse mode: 0 means no pulses, 1 means normally off, 2 normally on

								#define RELAY_PULSE_MODE            RELAY_PULSE_NONE


								// Default pulse time in seconds

								#define RELAY_PULSE_TIME            1.0


								// Relay requests flood protection window - in seconds

								#define RELAY_FLOOD_WINDOW          3


								// Allowed actual relay changes inside requests flood protection window

								#define RELAY_FLOOD_CHANGES         5


								// Pulse with in milliseconds for a latched relay

								#define RELAY_LATCHING_PULSE        10


								// Do not save relay state after these many milliseconds

								#define RELAY_SAVE_DELAY            1000


								//------------------------------------------------------------------------------

								// LED

								//------------------------------------------------------------------------------


								#define LED_MODE_MQTT               0       // LED will be managed from MQTT (OFF by default)

								#define LED_MODE_WIFI               1       // LED will blink according to the WIFI status

								#define LED_MODE_FOLLOW             2       // LED will follow state of linked relay (check RELAY#_LED)

								#define LED_MODE_FOLLOW_INVERSE     3       // LED will follow the opposite state of linked relay (check RELAY#_LED)

								#define LED_MODE_FINDME             4       // LED will be ON if all relays are OFF

								#define LED_MODE_FINDME_WIFI        5       // A mixture between WIFI and FINDME

								#define LED_MODE_ON                 6       // LED always ON

								#define LED_MODE_OFF                7       // LED always OFF

								#define LED_MODE_RELAY              8       // If any relay is ON, LED will be ON, otherwise OFF

								#define LED_MODE_RELAY_WIFI         9       // A mixture between WIFI and RELAY, the reverse of MIXED


								// -----------------------------------------------------------------------------

								// WIFI

								// -----------------------------------------------------------------------------


								#define WIFI_CONNECT_TIMEOUT    60000       // Connecting timeout for WIFI in ms

								#define WIFI_RECONNECT_INTERVAL 180000      // If could not connect to WIFI, retry after this time in ms

								#define WIFI_MAX_NETWORKS       5           // Max number of WIFI connection configurations

								#define WIFI_AP_MODE            AP_MODE_ALONE

								#define WIFI_SLEEP_ENABLED      1           // Enable WiFi light sleep

								#define WIFI_SCAN_NETWORKS      1           // Perform a network scan before connecting


								// Optional hardcoded configuration (up to 2 networks)

								#ifndef WIFI1_SSID

								#define WIFI1_SSID              ""

								#endif

								#ifndef WIFI1_PASS

								#define WIFI1_PASS              ""

								#endif

								#ifndef WIFI1_IP

								#define WIFI1_IP                ""

								#endif

								#ifndef WIFI1_GW

								#define WIFI1_GW                ""

								#endif

								#ifndef WIFI1_MASK

								#define WIFI1_MASK              ""

								#endif

								#ifndef WIFI1_DNS

								#define WIFI1_DNS               ""

								#endif

								#ifndef WIFI2_SSID

								#define WIFI2_SSID              ""

								#endif

								#ifndef WIFI2_PASS

								#define WIFI2_PASS              ""

								#endif

								#ifndef WIFI2_IP

								#define WIFI2_IP                ""

								#endif

								#ifndef WIFI2_GW

								#define WIFI2_GW                ""

								#endif

								#ifndef WIFI2_MASK

								#define WIFI2_MASK              ""

								#endif

								#ifndef WIFI2_DNS

								#define WIFI2_DNS               ""

								#endif


								#define WIFI_RSSI_1M            -30         // Calibrate it with your router reading the RSSI at 1m

								#define WIFI_PROPAGATION_CONST  4           // This is typically something between 2.7 to 4.3 (free space is 2)


								// -----------------------------------------------------------------------------

								// WEB

								// -----------------------------------------------------------------------------


								#ifndef WEB_SUPPORT

								#define WEB_SUPPORT             1           // Enable web support (http, api, 121.65Kb)

								#endif


								#ifndef WEB_EMBEDDED

								#define WEB_EMBEDDED            1           // Build the firmware with the web interface embedded in

								#endif


								// This is not working at the moment!!

								// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0

								#define WEB_SSL_ENABLED         0           // Use HTTPS web interface


								#define WEB_MODE_NORMAL         0

								#define WEB_MODE_PASSWORD       1


								#define WEB_USERNAME            "admin"     // HTTP username

								#define WEB_FORCE_PASS_CHANGE   1           // Force the user to change the password if default one

								#define WEB_PORT                80          // HTTP port


								// -----------------------------------------------------------------------------

								// WEBSOCKETS

								// -----------------------------------------------------------------------------


								// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)


								#define WS_AUTHENTICATION       1           // WS authentication ON by default (see #507)

								#define WS_BUFFER_SIZE          5           // Max number of secured websocket connections

								#define WS_TIMEOUT              1800000     // Timeout for secured websocket

								#define WS_UPDATE_INTERVAL      30000       // Update clients every 30 seconds


								// -----------------------------------------------------------------------------

								// API

								// -----------------------------------------------------------------------------


								// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)


								#define API_ENABLED             0           // Do not enable API by default

								#define API_BUFFER_SIZE         15          // Size of the buffer for HTTP GET API responses

								#define API_REAL_TIME_VALUES    0           // Show filtered/median values by default (0 => median, 1 => real time)


								// -----------------------------------------------------------------------------

								// UI

								// -----------------------------------------------------------------------------


								#define UI_TAG_INPUT            0

								#define UI_TAG_CHECKBOX         1

								#define UI_TAG_SELECT           2


								// -----------------------------------------------------------------------------

								// MDNS / LLMNR / NETBIOS / SSDP

								// -----------------------------------------------------------------------------


								#ifndef MDNS_SERVER_SUPPORT

								#define MDNS_SERVER_SUPPORT     1           // Publish services using mDNS by default (1.48Kb)

								#endif


								#ifndef MDNS_CLIENT_SUPPORT

								#define MDNS_CLIENT_SUPPORT     0           // Resolve mDNS names (3.44Kb)

								#endif


								#ifndef LLMNR_SUPPORT

								#define LLMNR_SUPPORT           0           // Publish device using LLMNR protocol by default (1.95Kb) - requires 2.4.0

								#endif


								#ifndef NETBIOS_SUPPORT

								#define NETBIOS_SUPPORT         0           // Publish device using NetBIOS protocol by default (1.26Kb) - requires 2.4.0

								#endif


								#ifndef SSDP_SUPPORT

								#define SSDP_SUPPORT            0           // Publish device using SSDP protocol by default (4.59Kb)

								                                            // Not compatible with ALEXA_SUPPORT at the moment

								#endif


								#ifndef SSDP_DEVICE_TYPE

								#define SSDP_DEVICE_TYPE        "upnp:rootdevice"

								//#define SSDP_DEVICE_TYPE        "urn:schemas-upnp-org:device:BinaryLight:1"

								#endif


								#if WEB_SUPPORT == 0

								#undef SSDP_SUPPORT

								#define SSDP_SUPPORT            0           // SSDP support requires web support

								#endif


								// -----------------------------------------------------------------------------

								// SPIFFS

								// -----------------------------------------------------------------------------


								#ifndef SPIFFS_SUPPORT

								#define SPIFFS_SUPPORT          0           // Do not add support for SPIFFS by default

								#endif


								// -----------------------------------------------------------------------------

								// OTA

								// -----------------------------------------------------------------------------


								#define OTA_PORT                8266        // OTA port

								#define OTA_GITHUB_FP           "D7:9F:07:61:10:B3:92:93:E3:49:AC:89:84:5B:03:80:C1:9E:2F:8B"


								// -----------------------------------------------------------------------------

								// NOFUSS

								// -----------------------------------------------------------------------------


								#ifndef NOFUSS_SUPPORT

								#define NOFUSS_SUPPORT          0          // Do not enable support for NoFuss by default (12.65Kb)

								#endif


								#define NOFUSS_ENABLED          0           // Do not perform NoFUSS updates by default

								#define NOFUSS_SERVER           ""          // Default NoFuss Server

								#define NOFUSS_INTERVAL         3600000     // Check for updates every hour


								// -----------------------------------------------------------------------------

								// UART <-> MQTT

								// -----------------------------------------------------------------------------


								#ifndef UART_MQTT_SUPPORT

								#define UART_MQTT_SUPPORT       0           // No support by default

								#endif


								#define UART_MQTT_USE_SOFT      0           // Use SoftwareSerial

								#define UART_MQTT_HW_PORT       Serial      // Hardware serial port (if UART_MQTT_USE_SOFT == 0)

								#define UART_MQTT_RX_PIN        4           // RX PIN (if UART_MQTT_USE_SOFT == 1)

								#define UART_MQTT_TX_PIN        5           // TX PIN (if UART_MQTT_USE_SOFT == 1)

								#define UART_MQTT_BAUDRATE      115200      // Serial speed

								#define UART_MQTT_BUFFER_SIZE   100         // UART buffer size


								#if UART_MQTT_SUPPORT

								#define MQTT_SUPPORT            1

								#undef TERMINAL_SUPPORT

								#define TERMINAL_SUPPORT        0

								#undef DEBUG_SERIAL_SUPPORT

								#define DEBUG_SERIAL_SUPPORT    0

								#endif


								// -----------------------------------------------------------------------------

								// MQTT

								// -----------------------------------------------------------------------------


								#ifndef MQTT_SUPPORT

								#define MQTT_SUPPORT            1           // MQTT support (22.38Kb async, 12.48Kb sync)

								#endif


								#ifndef MQTT_USE_ASYNC

								#define MQTT_USE_ASYNC          1           // Use AysncMQTTClient (1) or PubSubClient (0)

								#endif


								// MQTT OVER SSL

								// Using MQTT over SSL works pretty well but generates problems with the web interface.

								// It could be a good idea to use it in conjuntion with WEB_SUPPORT=0.

								// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0.

								//

								// You can use SSL with MQTT_USE_ASYNC=1 (AsyncMqttClient library)

								// but you might experience hiccups on the web interface, so my recommendation is:

								// WEB_SUPPORT=0

								//

								// If you use SSL with MQTT_USE_ASYNC=0 (PubSubClient library)

								// you will have to disable all the modules that use ESPAsyncTCP, that is:

								// ALEXA_SUPPORT=0, INFLUXDB_SUPPORT=0, TELNET_SUPPORT=0, THINGSPEAK_SUPPORT=0 and WEB_SUPPORT=0

								//

								// You will need the fingerprint for your MQTT server, example for CloudMQTT:

								// $ echo -n | openssl s_client -connect m11.cloudmqtt.com:24055 > cloudmqtt.pem

								// $ openssl x509 -noout -in cloudmqtt.pem -fingerprint -sha1


								#define MQTT_SSL_ENABLED            0               // By default MQTT over SSL will not be enabled

								#define MQTT_SSL_FINGERPRINT        ""              // SSL fingerprint of the server


								#define MQTT_ENABLED                0               // Do not enable MQTT connection by default

								#define MQTT_AUTOCONNECT            1               // If enabled and MDNS_SERVER_SUPPORT=1 will perform an autodiscover and

								                                                    // autoconnect to the first MQTT broker found if none defined

								#define MQTT_SERVER                 ""              // Default MQTT broker address

								#define MQTT_USER                   ""              // Default MQTT broker usename

								#define MQTT_PASS                   ""              // Default MQTT broker password

								#define MQTT_PORT                   1883            // MQTT broker port

								#define MQTT_TOPIC                  "{hostname}"    // Default MQTT base topic

								#define MQTT_RETAIN                 true            // MQTT retain flag

								#define MQTT_QOS                    0               // MQTT QoS value for all messages

								#define MQTT_KEEPALIVE              30              // MQTT keepalive value


								#define MQTT_RECONNECT_DELAY_MIN    5000            // Try to reconnect in 5 seconds upon disconnection

								#define MQTT_RECONNECT_DELAY_STEP   5000            // Increase the reconnect delay in 5 seconds after each failed attempt

								#define MQTT_RECONNECT_DELAY_MAX    120000          // Set reconnect time to 2 minutes at most


								#define MQTT_SKIP_RETAINED          1               // Skip retained messages on connection

								#define MQTT_SKIP_TIME              1000            // Skip messages for 1 second anter connection


								#define MQTT_USE_JSON               0               // Group messages in a JSON body

								#define MQTT_USE_JSON_DELAY         100             // Wait this many ms before grouping messages

								#define MQTT_QUEUE_MAX_SIZE         20              // Size of the MQTT queue when MQTT_USE_JSON is enabled


								// These are the properties that will be sent when useJson is true

								#ifndef MQTT_ENQUEUE_IP

								#define MQTT_ENQUEUE_IP             1

								#endif

								#ifndef MQTT_ENQUEUE_MAC

								#define MQTT_ENQUEUE_MAC            1

								#endif

								#ifndef MQTT_ENQUEUE_HOSTNAME

								#define MQTT_ENQUEUE_HOSTNAME       1

								#endif

								#ifndef MQTT_ENQUEUE_DATETIME

								#define MQTT_ENQUEUE_DATETIME       1

								#endif

								#ifndef MQTT_ENQUEUE_MESSAGE_ID

								#define MQTT_ENQUEUE_MESSAGE_ID     1

								#endif


								// These particles will be concatenated to the MQTT_TOPIC base to form the actual topic

								#define MQTT_TOPIC_JSON         "data"

								#define MQTT_TOPIC_ACTION       "action"

								#define MQTT_TOPIC_RELAY        "relay"

								#define MQTT_TOPIC_LED          "led"

								#define MQTT_TOPIC_BUTTON       "button"

								#define MQTT_TOPIC_IP           "ip"

								#define MQTT_TOPIC_VERSION      "version"

								#define MQTT_TOPIC_UPTIME       "uptime"

								#define MQTT_TOPIC_DATETIME     "datetime"

								#define MQTT_TOPIC_FREEHEAP     "freeheap"

								#define MQTT_TOPIC_VCC          "vcc"

								#define MQTT_TOPIC_STATUS       "status"

								#define MQTT_TOPIC_MAC          "mac"

								#define MQTT_TOPIC_RSSI         "rssi"

								#define MQTT_TOPIC_MESSAGE_ID   "id"

								#define MQTT_TOPIC_APP          "app"

								#define MQTT_TOPIC_INTERVAL     "interval"

								#define MQTT_TOPIC_HOSTNAME     "host"

								#define MQTT_TOPIC_TIME         "time"

								#define MQTT_TOPIC_RFOUT        "rfout"

								#define MQTT_TOPIC_RFIN         "rfin"

								#define MQTT_TOPIC_RFLEARN      "rflearn"

								#define MQTT_TOPIC_RFRAW        "rfraw"

								#define MQTT_TOPIC_UARTIN       "uartin"

								#define MQTT_TOPIC_UARTOUT      "uartout"

								#define MQTT_TOPIC_LOADAVG      "loadavg"


								// Light module

								#define MQTT_TOPIC_CHANNEL      "channel"

								#define MQTT_TOPIC_COLOR        "color"     // DEPRECATED, use RGB instead

								#define MQTT_TOPIC_COLOR_RGB    "rgb"

								#define MQTT_TOPIC_COLOR_HSV    "hsv"

								#define MQTT_TOPIC_ANIM_MODE    "anim_mode"

								#define MQTT_TOPIC_ANIM_SPEED   "anim_speed"

								#define MQTT_TOPIC_BRIGHTNESS   "brightness"

								#define MQTT_TOPIC_MIRED        "mired"

								#define MQTT_TOPIC_KELVIN       "kelvin"


								#define MQTT_STATUS_ONLINE      "1"         // Value for the device ON message

								#define MQTT_STATUS_OFFLINE     "0"         // Value for the device OFF message (will)


								#define MQTT_ACTION_RESET       "reboot"    // RESET MQTT topic particle


								// Internal MQTT events (do not change)

								#define MQTT_CONNECT_EVENT      0

								#define MQTT_DISCONNECT_EVENT   1

								#define MQTT_MESSAGE_EVENT      2


								#define MQTT_MESSAGE_ID_SHIFT   1000        // Store MQTT message id into EEPROM every these many


								// Custom get and set postfixes

								// Use something like "/status" or "/set", with leading slash

								// Since 1.9.0 the default value is "" for getter and "/set" for setter

								#ifndef MQTT_GETTER

								#define MQTT_GETTER             ""

								#endif

								#ifndef MQTT_SETTER

								#define MQTT_SETTER             "/set"

								#endif


								// -----------------------------------------------------------------------------

								// BROKER

								// -----------------------------------------------------------------------------


								#ifndef BROKER_SUPPORT

								#define BROKER_SUPPORT          1           // The broker is a poor-man's pubsub manager

								#endif


								// -----------------------------------------------------------------------------

								// SETTINGS

								// -----------------------------------------------------------------------------


								#ifndef SETTINGS_AUTOSAVE

								#define SETTINGS_AUTOSAVE       1           // Autosave settings o force manual commit

								#endif


								#define SETTINGS_MAX_LIST_COUNT 10          // Maximum index for settings lists


								// -----------------------------------------------------------------------------

								// LIGHT

								// -----------------------------------------------------------------------------


								// Available light providers (do not change)

								#define LIGHT_PROVIDER_NONE     0

								#define LIGHT_PROVIDER_MY92XX   1 // works with MY9291 and MY9231

								#define LIGHT_PROVIDER_DIMMER   2


								// LIGHT_PROVIDER_DIMMER can have from 1 to 5 different channels.

								// They have to be defined for each device in the hardware.h file.

								// If 3 or more channels first 3 will be considered RGB.

								// Usual configurations are:

								// 1 channels => W

								// 2 channels => WW

								// 3 channels => RGB

								// 4 channels => RGBW

								// 5 channels => RGBWW


								#ifndef LIGHT_SAVE_ENABLED

								#define LIGHT_SAVE_ENABLED      1           // Light channel values saved by default after each change

								#endif


								#define LIGHT_SAVE_DELAY        5           // Persist color after 5 seconds to avoid wearing out


								#ifndef LIGHT_MAX_PWM


								#if LIGHT_PROVIDER == LIGHT_PROVIDER_MY92XX

								#define LIGHT_MAX_PWM           255

								#endif


								#if LIGHT_PROVIDER == LIGHT_PROVIDER_DIMMER

								#define LIGHT_MAX_PWM           10000        // 5000 * 200ns => 1 kHz

								#endif


								#endif // LIGHT_MAX_PWM


								#ifndef LIGHT_LIMIT_PWM

								#define LIGHT_LIMIT_PWM         LIGHT_MAX_PWM   // Limit PWM to this value (prevent 100% power)

								#endif


								#ifndef LIGHT_MAX_VALUE

								#define LIGHT_MAX_VALUE         255         // Maximum light value

								#endif


								#define LIGHT_MAX_BRIGHTNESS    255         // Maximun brightness value

								#define LIGHT_STEP              32          // Step size

								#define LIGHT_USE_COLOR         1           // Use 3 first channels as RGB

								#define LIGHT_USE_WHITE         0           // Use white channel whenever RGB have the same value

								#define LIGHT_USE_GAMMA         0           // Use gamma correction for color channels

								#define LIGHT_USE_CSS           1           // Use CSS style to report colors (1=> "#FF0000", 0=> "255,0,0")

								#define LIGHT_USE_RGB           0           // Use RGB color selector (1=> RGB, 0=> HSV)


								#define LIGHT_USE_TRANSITIONS   1           // Transitions between colors

								#define LIGHT_TRANSITION_STEP   10          // Time in millis between each transtion step

								#define LIGHT_TRANSITION_STEPS  50          // Number of steps to acomplish transition


								// -----------------------------------------------------------------------------

								// DOMOTICZ

								// -----------------------------------------------------------------------------


								#ifndef DOMOTICZ_SUPPORT

								#define DOMOTICZ_SUPPORT        MQTT_SUPPORT    // Build with domoticz (if MQTT) support (1.72Kb)

								#endif


								#if DOMOTICZ_SUPPORT

								#undef MQTT_SUPPORT

								#define MQTT_SUPPORT            1               // If Domoticz enabled enable MQTT

								#endif


								#define DOMOTICZ_ENABLED        0               // Disable domoticz by default

								#define DOMOTICZ_IN_TOPIC       "domoticz/in"   // Default subscription topic

								#define DOMOTICZ_OUT_TOPIC      "domoticz/out"  // Default publication topic


								// -----------------------------------------------------------------------------

								// HOME ASSISTANT

								// -----------------------------------------------------------------------------


								#ifndef HOMEASSISTANT_SUPPORT

								#define HOMEASSISTANT_SUPPORT   MQTT_SUPPORT    // Build with home assistant support (if MQTT, 1.64Kb)

								#endif


								#if HOMEASSISTANT_SUPPORT

								#undef MQTT_SUPPORT

								#define MQTT_SUPPORT            1               // If Home Assistant enabled enable MQTT

								#endif


								#define HOMEASSISTANT_ENABLED   0               // Integration not enabled by default

								#define HOMEASSISTANT_PREFIX    "homeassistant" // Default MQTT prefix


								// -----------------------------------------------------------------------------

								// INFLUXDB

								// -----------------------------------------------------------------------------


								#ifndef INFLUXDB_SUPPORT

								#define INFLUXDB_SUPPORT        0               // Enable InfluxDB support by default (4.38Kb)

								#endif


								#define INFLUXDB_ENABLED        0               // InfluxDB disabled by default

								#define INFLUXDB_HOST           ""              // Default server

								#define INFLUXDB_PORT           8086            // Default InfluxDB port

								#define INFLUXDB_DATABASE       ""              // Default database

								#define INFLUXDB_USERNAME       ""              // Default username

								#define INFLUXDB_PASSWORD       ""              // Default password


								// -----------------------------------------------------------------------------

								// THINGSPEAK

								// -----------------------------------------------------------------------------


								#ifndef THINGSPEAK_SUPPORT

								#define THINGSPEAK_SUPPORT      1               // Enable Thingspeak support by default (2.56Kb)

								#endif


								#define THINGSPEAK_ENABLED      0               // Thingspeak disabled by default

								#define THINGSPEAK_APIKEY       ""              // Default API KEY


								#define THINGSPEAK_USE_ASYNC    1               // Use AsyncClient instead of WiFiClientSecure


								// THINGSPEAK OVER SSL

								// Using THINGSPEAK over SSL works well but generates problems with the web interface,

								// so you should compile it with WEB_SUPPORT to 0.

								// When THINGSPEAK_USE_ASYNC is 1, requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core 2.4.0.

								#define THINGSPEAK_USE_SSL      0               // Use secure connection

								#define THINGSPEAK_FINGERPRINT  "78 60 18 44 81 35 BF DF 77 84 D4 0A 22 0D 9B 4E 6C DC 57 2C"


								#define THINGSPEAK_HOST         "api.thingspeak.com"

								#if THINGSPEAK_USE_SSL

								#define THINGSPEAK_PORT         443

								#else

								#define THINGSPEAK_PORT         80

								#endif

								#define THINGSPEAK_URL          "/update"

								#define THINGSPEAK_MIN_INTERVAL 15000           // Minimum interval between POSTs (in millis)


								#ifndef ASYNC_TCP_SSL_ENABLED

								#if THINGSPEAK_USE_SSL && THINGSPEAK_USE_ASYNC

								#undef THINGSPEAK_SUPPORT                       // Thingspeak in ASYNC mode requires ASYNC_TCP_SSL_ENABLED

								#endif

								#endif


								// -----------------------------------------------------------------------------

								// SCHEDULER

								// -----------------------------------------------------------------------------


								#define SCHEDULER_TYPE_SWITCH       1

								#define SCHEDULER_TYPE_DIM          2


								#ifndef SCHEDULER_SUPPORT

								#define SCHEDULER_SUPPORT           1           // Enable scheduler (1.77Kb)

								#endif


								#if SCHEDULER_SUPPORT

								#undef NTP_SUPPORT

								#define NTP_SUPPORT                 1           // Scheduler needs NTP

								#endif


								#define SCHEDULER_MAX_SCHEDULES     10          // Max schedules alowed


								// -----------------------------------------------------------------------------

								// NTP

								// -----------------------------------------------------------------------------


								#ifndef NTP_SUPPORT

								#define NTP_SUPPORT             1               // Build with NTP support by default (6.78Kb)

								#endif


								#define NTP_SERVER              "pool.ntp.org"  // Default NTP server

								#define NTP_TIME_OFFSET         1               // Default timezone offset (GMT+1)

								#define NTP_DAY_LIGHT           true            // Enable daylight time saving by default

								#define NTP_SYNC_INTERVAL       60              // NTP initial check every minute

								#define NTP_UPDATE_INTERVAL     1800            // NTP check every 30 minutes

								#define NTP_START_DELAY         1000            // Delay NTP start 1 second


								// -----------------------------------------------------------------------------

								// ALEXA

								// -----------------------------------------------------------------------------


								// This setting defines whether Alexa support should be built into the firmware

								#ifndef ALEXA_SUPPORT

								#define ALEXA_SUPPORT           1               // Enable Alexa support by default (10.84Kb)

								#endif


								// This is default value for the alexaEnabled setting that defines whether

								// this device should be discoberable and respond to Alexa commands.

								// Both ALEXA_SUPPORT and alexaEnabled should be 1 for Alexa support to work.

								#define ALEXA_ENABLED           1


								// -----------------------------------------------------------------------------

								// RFBRIDGE

								// This module is not compatible with RF_SUPPORT=1

								// -----------------------------------------------------------------------------


								#define RF_SEND_TIMES           4               // How many times to send the message

								#define RF_SEND_DELAY           500             // Interval between sendings in ms

								#define RF_RECEIVE_DELAY        500             // Interval between recieving in ms (avoid debouncing)


								#define RF_RAW_SUPPORT          0               // RF raw codes require a specific firmware for the EFM8BB1

								                                                // https://github.com/rhx/RF-Bridge-EFM8BB1


								// -----------------------------------------------------------------------------

								// IR

								// -----------------------------------------------------------------------------


								#ifndef IR_SUPPORT

								#define IR_SUPPORT              0               // Do not build with IR support by default (10.25Kb)

								#endif


								#ifndef IR_PIN

								#define IR_PIN                  4               // IR LED

								#endif


								// 24 Buttons Set of the IR Remote

								#ifndef IR_BUTTON_SET

								#define IR_BUTTON_SET           1               // IR button set to use (see below)

								#endif


								// IR Button modes

								#define IR_BUTTON_MODE_NONE         0

								#define IR_BUTTON_MODE_RGB          1

								#define IR_BUTTON_MODE_HSV          2

								#define IR_BUTTON_MODE_BRIGHTER     3

								#define IR_BUTTON_MODE_STATE        4

								#define IR_BUTTON_MODE_EFFECT       5


								#define LIGHT_EFFECT_SOLID          0

								#define LIGHT_EFFECT_FLASH          1

								#define LIGHT_EFFECT_STROBE         2

								#define LIGHT_EFFECT_FADE           3

								#define LIGHT_EFFECT_SMOOTH         4


								//Remote Buttons SET 1 (for the original Remote shipped with the controller)

								#if IR_SUPPORT

								#if IR_BUTTON_SET == 1


								/*

								   +------+------+------+------+

								   |  UP  | Down | OFF  |  ON  |

								   +------+------+------+------+

								   |  R   |  G   |  B   |  W   |

								   +------+------+------+------+

								   |  1   |  2   |  3   |FLASH |

								   +------+------+------+------+

								   |  4   |  5   |  6   |STROBE|

								   +------+------+------+------+

								   |  7   |  8   |  9   | FADE |

								   +------+------+------+------+

								   |  10  |  11  |  12  |SMOOTH|

								   +------+------+------+------+

								*/


								    #define IR_BUTTON_COUNT 24


								    const unsigned long IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = {


								        { 0xFF906F, IR_BUTTON_MODE_BRIGHTER, 1 },

								        { 0xFFB847, IR_BUTTON_MODE_BRIGHTER, 0 },

								        { 0xFFF807, IR_BUTTON_MODE_STATE, 0 },

								        { 0xFFB04F, IR_BUTTON_MODE_STATE, 1 },


								        { 0xFF9867, IR_BUTTON_MODE_RGB, 0xFF0000 },

								        { 0xFFD827, IR_BUTTON_MODE_RGB, 0x00FF00 },

								        { 0xFF8877, IR_BUTTON_MODE_RGB, 0x0000FF },

								        { 0xFFA857, IR_BUTTON_MODE_RGB, 0xFFFFFF },


								        { 0xFFE817, IR_BUTTON_MODE_RGB, 0xD13A01 },

								        { 0xFF48B7, IR_BUTTON_MODE_RGB, 0x00E644 },

								        { 0xFF6897, IR_BUTTON_MODE_RGB, 0x0040A7 },

								        { 0xFFB24D, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FLASH },


								        { 0xFF02FD, IR_BUTTON_MODE_RGB, 0xE96F2A },

								        { 0xFF32CD, IR_BUTTON_MODE_RGB, 0x00BEBF },

								        { 0xFF20DF, IR_BUTTON_MODE_RGB, 0x56406F },

								        { 0xFF00FF, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_STROBE },


								        { 0xFF50AF, IR_BUTTON_MODE_RGB, 0xEE9819 },

								        { 0xFF7887, IR_BUTTON_MODE_RGB, 0x00799A },

								        { 0xFF708F, IR_BUTTON_MODE_RGB, 0x944E80 },

								        { 0xFF58A7, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FADE },


								        { 0xFF38C7, IR_BUTTON_MODE_RGB, 0xFFFF00 },

								        { 0xFF28D7, IR_BUTTON_MODE_RGB, 0x0060A1 },

								        { 0xFFF00F, IR_BUTTON_MODE_RGB, 0xEF45AD },

								        { 0xFF30CF, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_SMOOTH }


								    };


								#endif


								//Remote Buttons SET 2 (another identical IR Remote shipped with another controller)

								#if IR_BUTTON_SET == 2


								/*

								   +------+------+------+------+

								   |  UP  | Down | OFF  |  ON  |

								   +------+------+------+------+

								   |  R   |  G   |  B   |  W   |

								   +------+------+------+------+

								   |  1   |  2   |  3   |FLASH |

								   +------+------+------+------+

								   |  4   |  5   |  6   |STROBE|

								   +------+------+------+------+

								   |  7   |  8   |  9   | FADE |

								   +------+------+------+------+

								   |  10  |  11  |  12  |SMOOTH|

								   +------+------+------+------+

								*/


								    #define IR_BUTTON_COUNT 24


								    const unsigned long IR_BUTTON[IR_BUTTON_COUNT][3] PROGMEM = {


								        { 0xFF00FF, IR_BUTTON_MODE_BRIGHTER, 1 },

								        { 0xFF807F, IR_BUTTON_MODE_BRIGHTER, 0 },

								        { 0xFF40BF, IR_BUTTON_MODE_STATE, 0 },

								        { 0xFFC03F, IR_BUTTON_MODE_STATE, 1 },


								        { 0xFF20DF, IR_BUTTON_MODE_RGB, 0xFF0000 },

								        { 0xFFA05F, IR_BUTTON_MODE_RGB, 0x00FF00 },

								        { 0xFF609F, IR_BUTTON_MODE_RGB, 0x0000FF },

								        { 0xFFE01F, IR_BUTTON_MODE_RGB, 0xFFFFFF },


								        { 0xFF10EF, IR_BUTTON_MODE_RGB, 0xD13A01 },

								        { 0xFF906F, IR_BUTTON_MODE_RGB, 0x00E644 },

								        { 0xFF50AF, IR_BUTTON_MODE_RGB, 0x0040A7 },

								        { 0xFFD02F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FLASH },


								        { 0xFF30CF, IR_BUTTON_MODE_RGB, 0xE96F2A },

								        { 0xFFB04F, IR_BUTTON_MODE_RGB, 0x00BEBF },

								        { 0xFF708F, IR_BUTTON_MODE_RGB, 0x56406F },

								        { 0xFFF00F, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_STROBE },


								        { 0xFF08F7, IR_BUTTON_MODE_RGB, 0xEE9819 },

								        { 0xFF8877, IR_BUTTON_MODE_RGB, 0x00799A },

								        { 0xFF48B7, IR_BUTTON_MODE_RGB, 0x944E80 },

								        { 0xFFC837, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_FADE },


								        { 0xFF28D7, IR_BUTTON_MODE_RGB, 0xFFFF00 },

								        { 0xFFA857, IR_BUTTON_MODE_RGB, 0x0060A1 },

								        { 0xFF6897, IR_BUTTON_MODE_RGB, 0xEF45AD },

								        { 0xFFE817, IR_BUTTON_MODE_EFFECT, LIGHT_EFFECT_SMOOTH }


								    };


								#endif


								#endif // IR_SUPPORT


								//--------------------------------------------------------------------------------

								// Custom RF module

								// Check http://tinkerman.cat/adding-rf-to-a-non-rf-itead-sonoff/

								// Enable support by passing RF_SUPPORT=1 build flag

								// This module is not compatible with RFBRIDGE

								//--------------------------------------------------------------------------------


								#ifndef RF_SUPPORT

								#define RF_SUPPORT                  0

								#endif


								#ifndef RF_PIN

								#define RF_PIN                      14

								#endif


								#define RF_DEBOUNCE                 500

								#define RF_LEARN_TIMEOUT            60000