You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
421 lines
14 KiB
421 lines
14 KiB
/*
|
|
|
|
IR MODULE
|
|
|
|
Copyright (C) 2018 by Alexander Kolesnikov (raw and MQTT implementation)
|
|
Copyright (C) 2017-2018 by François Déchery
|
|
Copyright (C) 2016-2018 by Xose Pérez <xose dot perez at gmail dot com>
|
|
|
|
-----------------------------------------------------------------------------
|
|
Configuration
|
|
-----------------------------------------------------------------------------
|
|
|
|
To enable transmit functions define IR_TX_PIN
|
|
To enable receiver functions define IR_RX_PIN
|
|
MQTT input topic: {root}/irin
|
|
MQTT output topic: {root}/irout/set
|
|
|
|
--------------------------------------------------------------------------------
|
|
MQTT messages
|
|
--------------------------------------------------------------------------------
|
|
|
|
Decoded messages:
|
|
|
|
Transmitting:
|
|
Payload: 2:121944:32:1 (<type>:<code>:<bits>[:<repeat>])
|
|
The repeat value is optional and defaults to 1
|
|
|
|
Receiving:
|
|
Payload: 2:121944:32 (<type>:<code>:<bits>)
|
|
|
|
Raw messages:
|
|
|
|
Transmitting:
|
|
Payload: 1000,1000,1000,1000,1000,DELAY,COUNT,FREQ:500,500,500,500,500
|
|
| IR codes | | IR repeat codes |
|
|
codes - time in microseconds when IR LED On/Off. First value - ON, second - Off ...
|
|
DELAY - delay in milliseconds between sending repeats
|
|
COUNT - how many repeats send. Max 120.
|
|
FREQ - modulation frequency. Usually 38kHz. You may set 38, it means 38kHz or set 38000, it meant same.
|
|
Repeat codes is optional. You may omit ":" and codes. In this case if repeat count > 0 we repeat main code.
|
|
|
|
Receiving:
|
|
Payload: 1000,1000,1000,1000,1000
|
|
| IR codes |
|
|
|
|
--------------------------------------------------------------------------------
|
|
*/
|
|
|
|
#if IR_SUPPORT
|
|
|
|
#include <IRremoteESP8266.h>
|
|
|
|
#if defined(IR_RX_PIN)
|
|
|
|
#include <IRrecv.h>
|
|
IRrecv _ir_receiver(IR_RX_PIN, IR_BUFFER_SIZE, IR_TIMEOUT, true);
|
|
|
|
decode_results _ir_results;
|
|
|
|
#endif // defined(IR_RX_PIN)
|
|
|
|
#if defined(IR_TX_PIN)
|
|
|
|
#include <IRsend.h>
|
|
IRsend _ir_sender(IR_TX_PIN);
|
|
|
|
#if IR_USE_RAW
|
|
uint16_t _ir_freq = 38; // IR modulation freq. for sending codes and repeat codes
|
|
uint8_t _ir_repeat_size = 0; // size of repeat array
|
|
uint16_t * _ir_raw; // array for sending codes and repeat codes
|
|
#else
|
|
uint8_t _ir_type = 0; // Type of encoding
|
|
uint64_t _ir_code = 0; // Code to transmit
|
|
uint16_t _ir_bits = 0; // Code bits
|
|
#endif
|
|
|
|
uint8_t _ir_repeat = 0; // count of times repeating of repeat_code
|
|
uint32_t _ir_delay = IR_DELAY; // delay between repeat codes
|
|
|
|
#endif // defined(IR_TX_PIN)
|
|
|
|
// MQTT to IR
|
|
#if MQTT_SUPPORT && defined(IR_TX_PIN)
|
|
|
|
void _irMqttCallback(unsigned int type, const char * topic, const char * payload) {
|
|
|
|
if (type == MQTT_CONNECT_EVENT) {
|
|
mqttSubscribe(MQTT_TOPIC_IROUT);
|
|
}
|
|
|
|
if (type == MQTT_MESSAGE_EVENT) {
|
|
String t = mqttMagnitude((char *) topic);
|
|
|
|
// Match topic
|
|
if (t.equals(MQTT_TOPIC_IROUT)) {
|
|
|
|
String data = String(payload);
|
|
unsigned int len = data.length();
|
|
int col = data.indexOf(":"); // position of ":" which means repeat_code
|
|
|
|
#if IR_USE_RAW
|
|
|
|
unsigned char count = 1; // count of code values for allocating array
|
|
|
|
if (col > 2) { // count & validating repeat code
|
|
|
|
_ir_repeat_size = 1;
|
|
|
|
// count & validate repeat-string
|
|
for(int i = col+1; i < len; i++) {
|
|
if (i < len-1) {
|
|
if ( payload[i] == ',' && isDigit(payload[i+1]) && i>0 ) { //validate string
|
|
_ir_repeat_size++;
|
|
} else if (!isDigit(payload[i])) {
|
|
// Error in repeat_code. Use comma separated unsigned integer values.
|
|
// Last three is repeat delay, repeat count(<120) and frequency.
|
|
// After all you may write ':' and specify repeat code followed by comma.
|
|
DEBUG_MSG_P(PSTR("[IR] Error in repeat code.\n"));
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
len = col; //cut repeat code from main code processing
|
|
|
|
} // end of counting & validating repeat code
|
|
|
|
// count & validate main code string
|
|
for(int i = 0; i < len; i++) {
|
|
if (i<len-1) {
|
|
if ( payload[i] == ',' && isDigit(payload[i+1]) && i>0 ) { //validate string
|
|
count++;
|
|
} else if (!isDigit(payload[i])) {
|
|
// Error in main code. Use comma separated unsigned integer values.
|
|
// Last three is repeat delay, repeat count(<120) and frequency.
|
|
// After all you may write ':' and specify repeat code followed by comma.
|
|
DEBUG_MSG_P(PSTR("[IR] Error in main code.\n"));
|
|
return;
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
_ir_raw = (uint16_t*)calloc(count, sizeof(uint16_t)); // allocating array for main codes
|
|
String value = ""; // for populating values of array from comma separated string
|
|
int j = 0; // for populating values of array from comma separated string
|
|
|
|
// populating main code array from part of MQTT string
|
|
for (int i = 0; i < len; i++) {
|
|
if (payload[i] != ',') {
|
|
value = value + data[i];
|
|
}
|
|
if ((payload[i] == ',') || (i == len - 1)) {
|
|
_ir_raw[j]= value.toInt();
|
|
value = "";
|
|
j++;
|
|
}
|
|
}
|
|
|
|
// if count>3 then we have values, repeat delay, count and modulation frequency
|
|
_ir_repeat=0;
|
|
if (count>3) {
|
|
if (_ir_raw[count-2] <= 120) { // if repeat count > 120 it's to long and ussualy unusual. maybe we get raw code without this parameters and just use defaults for freq.
|
|
_ir_freq = _ir_raw[count-1];
|
|
_ir_repeat = _ir_raw[count-2];
|
|
_ir_delay = _ir_raw[count-3];
|
|
count = count - 3;
|
|
}
|
|
}
|
|
|
|
DEBUG_MSG_P(PSTR("[IR] Raw IR output %d codes, repeat %d times on %d(k)Hz freq.\n"), count, _ir_repeat, _ir_freq);
|
|
|
|
#if defined(IR_RX_PIN)
|
|
_ir_receiver.disableIRIn();
|
|
#endif
|
|
_ir_sender.sendRaw(_ir_raw, count, _ir_freq);
|
|
|
|
if (_ir_repeat==0) { // no repeat, cleaning array, enabling receiver
|
|
free(_ir_raw);
|
|
#if defined(IR_RX_PIN)
|
|
_ir_receiver.enableIRIn();
|
|
#endif
|
|
} else if (col>2) { // repeat with repeat_code
|
|
|
|
DEBUG_MSG_P(PSTR("[IR] Repeat codes count: %d\n"), _ir_repeat_size);
|
|
|
|
free(_ir_raw);
|
|
_ir_raw = (uint16_t*)calloc(_ir_repeat_size, sizeof(uint16_t));
|
|
|
|
String value = ""; // for populating values of array from comma separated string
|
|
int j = 0; // for populating values of array from comma separated string
|
|
len = data.length(); //redifining length to full lenght
|
|
|
|
// populating repeat code array from part of MQTT string
|
|
for (int i = col+1; i < len; i++) {
|
|
value = value + data[i];
|
|
if ((payload[i] == ',') || (i == len - 1)) {
|
|
_ir_raw[j]= value.toInt();
|
|
value = "";
|
|
j++;
|
|
}
|
|
}
|
|
|
|
} else { // if repeat code not specified (col<=2) repeat with current main code
|
|
_ir_repeat_size = count;
|
|
}
|
|
|
|
#else
|
|
|
|
_ir_repeat = 0;
|
|
|
|
if (col > 0) {
|
|
|
|
_ir_type = data.toInt();
|
|
_ir_code = data.substring(col+1).toInt();
|
|
|
|
col = data.indexOf(":", col+1);
|
|
if (col > 0) {
|
|
_ir_bits = data.substring(col+1).toInt();
|
|
col = data.indexOf(":", col+1);
|
|
if (col > 2) {
|
|
_ir_repeat = data.substring(col+1).toInt();
|
|
} else {
|
|
_ir_repeat = IR_REPEAT;
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (_ir_repeat > 0) {
|
|
DEBUG_MSG_P(PSTR("[IR] IROUT: %d:%lu:%d:%d\n"), _ir_type, (unsigned long) _ir_code, _ir_bits, _ir_repeat);
|
|
} else {
|
|
DEBUG_MSG_P(PSTR("[IR] Wrong MQTT payload format (%s)\n"), payload);
|
|
}
|
|
|
|
#endif // IR_USE_RAW
|
|
|
|
} // end of match topic
|
|
|
|
} // end of MQTT message
|
|
|
|
} //end of function
|
|
|
|
void _irTXLoop() {
|
|
|
|
static uint32_t last = 0;
|
|
if ((_ir_repeat > 0) && (millis() - last > _ir_delay)) {
|
|
last = millis();
|
|
|
|
// Send message
|
|
#if IR_USE_RAW
|
|
_ir_sender.sendRaw(_ir_raw, _ir_repeat_size, _ir_freq);
|
|
#else
|
|
_ir_sender.send(_ir_type, _ir_code, _ir_bits);
|
|
#endif
|
|
|
|
// Update repeat count
|
|
--_ir_repeat;
|
|
if (0 == _ir_repeat) {
|
|
#if IR_USE_RAW
|
|
free(_ir_raw);
|
|
#endif
|
|
#if defined(IR_RX_PIN)
|
|
_ir_receiver.enableIRIn();
|
|
#endif
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif // MQTT_SUPPORT && defined(IR_TX_PIN)
|
|
|
|
// Receiving
|
|
|
|
#if defined(IR_RX_PIN)
|
|
|
|
void _irProcess(unsigned char type, unsigned long code) {
|
|
|
|
#if IR_BUTTON_SET > 0
|
|
|
|
boolean found = false;
|
|
|
|
for (unsigned char i = 0; i < IR_BUTTON_COUNT ; i++) {
|
|
|
|
uint32_t button_code = pgm_read_dword(&IR_BUTTON[i][0]);
|
|
if (code == button_code) {
|
|
|
|
unsigned long button_mode = pgm_read_dword(&IR_BUTTON[i][1]);
|
|
unsigned long button_value = pgm_read_dword(&IR_BUTTON[i][2]);
|
|
|
|
if (button_mode == IR_BUTTON_MODE_STATE) {
|
|
relayStatus(0, button_value);
|
|
}
|
|
|
|
if (button_mode == IR_BUTTON_MODE_TOGGLE) {
|
|
relayToggle(button_value);
|
|
}
|
|
|
|
#if LIGHT_PROVIDER != LIGHT_PROVIDER_NONE
|
|
|
|
if (button_mode == IR_BUTTON_MODE_BRIGHTER) {
|
|
lightBrightnessStep(button_value ? 1 : -1);
|
|
nice_delay(150); //debounce
|
|
}
|
|
|
|
if (button_mode == IR_BUTTON_MODE_RGB) {
|
|
lightColor(button_value);
|
|
}
|
|
|
|
/*
|
|
#if LIGHT_PROVIDER == LIGHT_PROVIDER_FASTLED
|
|
if (button_mode == IR_BUTTON_MODE_EFFECT) {
|
|
_buttonAnimMode(button_value);
|
|
}
|
|
#endif
|
|
*/
|
|
|
|
/*
|
|
if (button_mode == IR_BUTTON_MODE_HSV) {
|
|
lightColor(button_value);
|
|
}
|
|
*/
|
|
|
|
lightUpdate(true, true);
|
|
|
|
#endif
|
|
|
|
found = true;
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (!found) {
|
|
DEBUG_MSG_P(PSTR("[IR] Code does not match any action\n"));
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
void _irRXLoop() {
|
|
|
|
if (_ir_receiver.decode(&_ir_results)) {
|
|
|
|
_ir_receiver.resume(); // Receive the next value
|
|
|
|
// Debounce
|
|
static unsigned long last_time = 0;
|
|
if (millis() - last_time < IR_DEBOUNCE) return;
|
|
last_time = millis();
|
|
|
|
#if IR_USE_RAW
|
|
// Check code
|
|
if (_ir_results.rawlen < 1) return;
|
|
char * payload;
|
|
String value = "";
|
|
for (int i = 1; i < _ir_results.rawlen; i++) {
|
|
if (i>1) value = value + ",";
|
|
value = value + String(_ir_results.rawbuf[i] * RAWTICK);
|
|
}
|
|
payload = const_cast<char*>(value.c_str());
|
|
#else
|
|
// Check code
|
|
if (_ir_results.value < 1) return;
|
|
if (_ir_results.decode_type < 1) return;
|
|
if (_ir_results.bits < 1) return;
|
|
char payload[32];
|
|
snprintf_P(payload, sizeof(payload), PSTR("%u:%lu:%u"), _ir_results.decode_type, (unsigned long) _ir_results.value, _ir_results.bits);
|
|
#endif
|
|
|
|
DEBUG_MSG_P(PSTR("[IR] IRIN: %s\n"), payload);
|
|
|
|
#if not IR_USE_RAW
|
|
_irProcess(_ir_results.decode_type, (unsigned long) _ir_results.value);
|
|
#endif
|
|
|
|
#if MQTT_SUPPORT
|
|
if (strlen(payload)>0) {
|
|
mqttSend(MQTT_TOPIC_IRIN, (const char *) payload);
|
|
}
|
|
#endif
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif // defined(IR_RX_PIN)
|
|
|
|
// -----------------------------------------------------------------------------
|
|
|
|
void _irLoop() {
|
|
#if defined(IR_RX_PIN)
|
|
_irRXLoop();
|
|
#endif
|
|
#if MQTT_SUPPORT && defined(IR_TX_PIN)
|
|
_irTXLoop();
|
|
#endif
|
|
}
|
|
|
|
void irSetup() {
|
|
|
|
#if defined(IR_RX_PIN)
|
|
_ir_receiver.enableIRIn();
|
|
DEBUG_MSG_P(PSTR("[IR] Receiver initialized \n"));
|
|
#endif
|
|
|
|
#if MQTT_SUPPORT && defined(IR_TX_PIN)
|
|
_ir_sender.begin();
|
|
mqttRegister(_irMqttCallback);
|
|
DEBUG_MSG_P(PSTR("[IR] Transmitter initialized \n"));
|
|
#endif
|
|
|
|
espurnaRegisterLoop(_irLoop);
|
|
|
|
}
|
|
|
|
#endif // IR_SUPPORT
|