Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

134 lines
4.6 KiB

// -----------------------------------------------------------------------------
// BH1750 Liminosity sensor over I2C
// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
// -----------------------------------------------------------------------------
#if SENSOR_SUPPORT && BH1750_SUPPORT
#pragma once
#include "Arduino.h"
#include "I2CSensor.h"
#define BH1750_CONTINUOUS_HIGH_RES_MODE 0x10 // Start measurement at 1lx resolution. Measurement time is approx 120ms.
#define BH1750_CONTINUOUS_HIGH_RES_MODE_2 0x11 // Start measurement at 0.5lx resolution. Measurement time is approx 120ms.
#define BH1750_CONTINUOUS_LOW_RES_MODE 0x13 // Start measurement at 4lx resolution. Measurement time is approx 16ms.
#define BH1750_ONE_TIME_HIGH_RES_MODE 0x20 // Start measurement at 1lx resolution. Measurement time is approx 120ms.
// Device is automatically set to Power Down after measurement.
#define BH1750_ONE_TIME_HIGH_RES_MODE_2 0x21 // Start measurement at 0.5lx resolution. Measurement time is approx 120ms.
// Device is automatically set to Power Down after measurement.
#define BH1750_ONE_TIME_LOW_RES_MODE 0x23 // Start measurement at 1lx resolution. Measurement time is approx 120ms.
// Device is automatically set to Power Down after measurement.
class BH1750Sensor : public I2CSensor {
public:
// ---------------------------------------------------------------------
// Public
// ---------------------------------------------------------------------
BH1750Sensor(): I2CSensor() {
_sensor_id = SENSOR_BH1750_ID;
_count = 1;
}
// ---------------------------------------------------------------------
void setMode(unsigned char mode) {
if (_mode == mode) return;
_mode = mode;
_dirty = true;
}
// ---------------------------------------------------------------------
unsigned char getMode() {
return _mode;
}
// ---------------------------------------------------------------------
// Sensor API
// ---------------------------------------------------------------------
// Initialization method, must be idempotent
void begin() {
if (!_dirty) return;
_dirty = false;
// I2C auto-discover
unsigned char addresses[] = {0x23, 0x5C};
_address = _begin_i2c(_address, sizeof(addresses), addresses);
if (_address == 0) return;
// Run configuration on next update
_run_configure = true;
}
// Descriptive name of the sensor
String description() {
char buffer[25];
snprintf(buffer, sizeof(buffer), "BH1750 @ I2C (0x%02X)", _address);
return String(buffer);
}
// Type for slot # index
unsigned char type(unsigned char index) {
if (index == 0) return MAGNITUDE_LUX;
return MAGNITUDE_NONE;
}
// Pre-read hook (usually to populate registers with up-to-date data)
void pre() {
_error = SENSOR_ERROR_OK;
_lux = _read();
}
// Current value for slot # index
double value(unsigned char index) {
if (index == 0) return _lux;
return 0;
}
protected:
double _read() {
// For one-shot modes reconfigure sensor & wait for conversion
if (_run_configure) {
// Configure mode
i2c_write_uint8(_address, _mode);
// According to datasheet
// conversion time is ~16ms for low resolution
// and ~120 for high resolution
// but more time is needed
unsigned long wait = (_mode & 0x02) ? 24 : 180;
unsigned long start = millis();
while (millis() - start < wait) delay(1);
// Keep on running configure each time if one-shot mode
_run_configure = _mode & 0x20;
}
double level = (double) i2c_read_uint16(_address);
if (level == 0xFFFF) {
_error = SENSOR_ERROR_CRC;
_run_configure = true;
return 0;
}
return level / 1.2;
}
unsigned char _mode;
bool _run_configure = false;
double _lux = 0;
};
#endif // SENSOR_SUPPORT && BH1750_SUPPORT