Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

65 lines
2.6 KiB

//--------------------------------------------------------------------------------
// Custom RF module
// Check http://tinkerman.cat/adding-rf-to-a-non-rf-itead-sonoff/
// Enable support by passing ENABLE_RF=1 build flag
//--------------------------------------------------------------------------------
#define RF_PIN 14
#define RF_CHANNEL 31
#define RF_DEVICE 1
//--------------------------------------------------------------------------------
// DHTXX temperature/humidity sensor
// Enable support by passing ENABLE_DHT=1 build flag
//--------------------------------------------------------------------------------
#define DHT_PIN 14
#define DHT_UPDATE_INTERVAL 300000
#define DHT_TYPE DHT22
#define DHT_TIMING 11
#define DHT_TEMPERATURE_TOPIC "/temperature"
#define DHT_HUMIDITY_TOPIC "/humidity"
//--------------------------------------------------------------------------------
// DS18B20 temperature sensor
// Enable support by passing ENABLE_DS18B20=1 build flag
//--------------------------------------------------------------------------------
#define DS_PIN 14
#define DS_UPDATE_INTERVAL 60000
#define DS_TEMPERATURE_TOPIC "/temperature"
//--------------------------------------------------------------------------------
// Custom current sensor
// Check http://tinkerman.cat/your-laundry-is-done/
// Enable support by passing ENABLE_EMON=1 build flag
//--------------------------------------------------------------------------------
#define EMON_CURRENT_PIN 0
#define EMON_SAMPLES 1000
#define EMON_INTERVAL 10000
#define EMON_MEASUREMENTS 6
#define EMON_ADC_BITS 10
#define EMON_REFERENCE_VOLTAGE 1.0
#define EMON_CURRENT_PRECISION 1
#define EMON_CURRENT_OFFSET 0.25
#define EMON_MAINS_VOLTAGE 230
#define EMON_CURRENT_RATIO 180
#define EMON_POWER_TOPIC "/power"
//--------------------------------------------------------------------------------
// HLW8012 power sensor (Sonoff POW)
// Enable support by passing ENABLE_POW=1 build flag
// Enabled by default when selecting SONOFF_POW hardware
//--------------------------------------------------------------------------------
#define POW_SEL_PIN 5
#define POW_CF1_PIN 13
#define POW_CF_PIN 14
#define POW_SEL_CURRENT HIGH
#define POW_CURRENT_R 0.001
#define POW_VOLTAGE_R_UP ( 5 * 470000 ) // Real: 2280k
#define POW_VOLTAGE_R_DOWN ( 1000 ) // Real 1.009k
#define POW_POWER_TOPIC "/power"
#define POW_UPDATE_INTERVAL 10000
#define POW_REPORT_EVERY 6