You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
267 lines
8.7 KiB
267 lines
8.7 KiB
/*
|
|
|
|
POW MODULE
|
|
Support for Sonoff POW HLW8012-based power monitor
|
|
|
|
Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
|
|
|
|
*/
|
|
|
|
#if ENABLE_POW
|
|
|
|
#include <HLW8012.h>
|
|
#include <Hash.h>
|
|
#include <ArduinoJson.h>
|
|
#include <EEPROM.h>
|
|
|
|
HLW8012 hlw8012;
|
|
bool _powEnabled = false;
|
|
|
|
// -----------------------------------------------------------------------------
|
|
// POW
|
|
// -----------------------------------------------------------------------------
|
|
|
|
// When using interrupts we have to call the library entry point
|
|
// whenever an interrupt is triggered
|
|
void hlw8012_cf1_interrupt() {
|
|
hlw8012.cf1_interrupt();
|
|
}
|
|
|
|
void hlw8012_cf_interrupt() {
|
|
hlw8012.cf_interrupt();
|
|
}
|
|
|
|
void powEnable(bool status) {
|
|
_powEnabled = status;
|
|
if (_powEnabled) {
|
|
#if POW_USE_INTERRUPTS == 1
|
|
attachInterrupt(POW_CF1_PIN, hlw8012_cf1_interrupt, CHANGE);
|
|
attachInterrupt(POW_CF_PIN, hlw8012_cf_interrupt, CHANGE);
|
|
#endif
|
|
DEBUG_MSG("[POW] Enabled\n");
|
|
} else {
|
|
#if POW_USE_INTERRUPTS == 1
|
|
detachInterrupt(POW_CF1_PIN);
|
|
detachInterrupt(POW_CF_PIN);
|
|
#endif
|
|
DEBUG_MSG("[POW] Disabled\n");
|
|
}
|
|
}
|
|
|
|
// -----------------------------------------------------------------------------
|
|
|
|
void powSaveCalibration() {
|
|
setSetting("powPowerMult", hlw8012.getPowerMultiplier());
|
|
setSetting("powCurrentMult", hlw8012.getCurrentMultiplier());
|
|
setSetting("powVoltageMult", hlw8012.getVoltageMultiplier());
|
|
}
|
|
|
|
void powRetrieveCalibration() {
|
|
double value;
|
|
value = getSetting("powPowerMult", 0).toFloat();
|
|
if (value > 0) hlw8012.setPowerMultiplier((int) value);
|
|
value = getSetting("powCurrentMult", 0).toFloat();
|
|
if (value > 0) hlw8012.setCurrentMultiplier((int) value);
|
|
value = getSetting("powVoltageMult", 0).toFloat();
|
|
if (value > 0) hlw8012.setVoltageMultiplier((int) value);
|
|
}
|
|
|
|
void powSetExpectedActivePower(unsigned int power) {
|
|
if (power > 0) {
|
|
hlw8012.expectedActivePower(power);
|
|
powSaveCalibration();
|
|
}
|
|
}
|
|
|
|
void powSetExpectedCurrent(double current) {
|
|
if (current > 0) {
|
|
hlw8012.expectedCurrent(current);
|
|
powSaveCalibration();
|
|
}
|
|
}
|
|
|
|
void powSetExpectedVoltage(unsigned int voltage) {
|
|
if (voltage > 0) {
|
|
hlw8012.expectedVoltage(voltage);
|
|
powSaveCalibration();
|
|
}
|
|
}
|
|
|
|
void powReset() {
|
|
hlw8012.resetMultipliers();
|
|
powSaveCalibration();
|
|
}
|
|
|
|
// -----------------------------------------------------------------------------
|
|
|
|
unsigned int getActivePower() {
|
|
return hlw8012.getActivePower();
|
|
}
|
|
|
|
unsigned int getApparentPower() {
|
|
return hlw8012.getApparentPower();
|
|
}
|
|
|
|
unsigned int getReactivePower() {
|
|
return hlw8012.getReactivePower();
|
|
}
|
|
|
|
double getCurrent() {
|
|
return hlw8012.getCurrent();
|
|
}
|
|
|
|
unsigned int getVoltage() {
|
|
return hlw8012.getVoltage();
|
|
}
|
|
|
|
unsigned int getPowerFactor() {
|
|
return (int) (100 * hlw8012.getPowerFactor());
|
|
}
|
|
|
|
// -----------------------------------------------------------------------------
|
|
|
|
void powSetup() {
|
|
|
|
// Initialize HLW8012
|
|
// void begin(unsigned char cf_pin, unsigned char cf1_pin, unsigned char sel_pin, unsigned char currentWhen = HIGH, bool use_interrupts = false, unsigned long pulse_timeout = PULSE_TIMEOUT);
|
|
// * cf_pin, cf1_pin and sel_pin are GPIOs to the HLW8012 IC
|
|
// * currentWhen is the value in sel_pin to select current sampling
|
|
// * set use_interrupts to true to use interrupts to monitor pulse widths
|
|
// * leave pulse_timeout to the default value, recommended when using interrupts
|
|
#if POW_USE_INTERRUPTS
|
|
hlw8012.begin(POW_CF_PIN, POW_CF1_PIN, POW_SEL_PIN, POW_SEL_CURRENT, true);
|
|
#else
|
|
hlw8012.begin(POW_CF_PIN, POW_CF1_PIN, POW_SEL_PIN, POW_SEL_CURRENT, false, 1000000);
|
|
#endif
|
|
|
|
// These values are used to calculate current, voltage and power factors as per datasheet formula
|
|
// These are the nominal values for the Sonoff POW resistors:
|
|
// * The CURRENT_RESISTOR is the 1milliOhm copper-manganese resistor in series with the main line
|
|
// * The VOLTAGE_RESISTOR_UPSTREAM are the 5 470kOhm resistors in the voltage divider that feeds the V2P pin in the HLW8012
|
|
// * The VOLTAGE_RESISTOR_DOWNSTREAM is the 1kOhm resistor in the voltage divider that feeds the V2P pin in the HLW8012
|
|
hlw8012.setResistors(POW_CURRENT_R, POW_VOLTAGE_R_UP, POW_VOLTAGE_R_DOWN);
|
|
|
|
// Retrieve calibration values
|
|
powRetrieveCalibration();
|
|
|
|
// API definitions
|
|
apiRegister("/api/power", "power", [](char * buffer, size_t len) {
|
|
snprintf(buffer, len, "%d", getActivePower());
|
|
});
|
|
apiRegister("/api/current", "current", [](char * buffer, size_t len) {
|
|
dtostrf(getCurrent(), len-1, 2, buffer);
|
|
});
|
|
apiRegister("/api/voltage", "voltage", [](char * buffer, size_t len) {
|
|
snprintf(buffer, len, "%d", getVoltage());
|
|
});
|
|
|
|
}
|
|
|
|
void powLoop() {
|
|
|
|
static unsigned long last_update = 0;
|
|
static unsigned char report_count = POW_REPORT_EVERY;
|
|
|
|
static unsigned long power_sum = 0;
|
|
static double current_sum = 0;
|
|
static unsigned long voltage_sum = 0;
|
|
static bool powWasEnabled = false;
|
|
|
|
// POW is disabled while there is no internet connection
|
|
// When the HLW8012 measurements are enabled back we reset the timer
|
|
if (!_powEnabled) {
|
|
powWasEnabled = false;
|
|
return;
|
|
}
|
|
if (!powWasEnabled) {
|
|
last_update = millis();
|
|
powWasEnabled = true;
|
|
}
|
|
|
|
if (millis() - last_update > POW_UPDATE_INTERVAL) {
|
|
|
|
last_update = millis();
|
|
|
|
unsigned int power = getActivePower();
|
|
unsigned int voltage = getVoltage();
|
|
double current = getCurrent();
|
|
unsigned int apparent = getApparentPower();
|
|
unsigned int factor = getPowerFactor();
|
|
unsigned int reactive = getReactivePower();
|
|
|
|
power_sum += power;
|
|
current_sum += current;
|
|
voltage_sum += voltage;
|
|
|
|
DynamicJsonBuffer jsonBuffer;
|
|
JsonObject& root = jsonBuffer.createObject();
|
|
|
|
root["powVisible"] = 1;
|
|
root["powActivePower"] = power;
|
|
root["powCurrent"] = current;
|
|
root["powVoltage"] = voltage;
|
|
root["powApparentPower"] = apparent;
|
|
root["powReactivePower"] = reactive;
|
|
root["powPowerFactor"] = factor;
|
|
|
|
String output;
|
|
root.printTo(output);
|
|
wsSend(output.c_str());
|
|
|
|
if (--report_count == 0) {
|
|
|
|
power = power_sum / POW_REPORT_EVERY;
|
|
current = current_sum / POW_REPORT_EVERY;
|
|
voltage = voltage_sum / POW_REPORT_EVERY;
|
|
apparent = current * voltage;
|
|
reactive = (apparent > power) ? sqrt(apparent * apparent - power * power) : 0;
|
|
factor = (apparent > 0) ? 100 * power / apparent : 100;
|
|
if (factor > 100) factor = 100;
|
|
|
|
// Calculate energy increment (ppower times time) and create C-string
|
|
double energy_inc = (double) power * POW_REPORT_EVERY * POW_UPDATE_INTERVAL / 1000.0 / 3600.0;
|
|
char energy_buf[11];
|
|
dtostrf(energy_inc, 11, 3, energy_buf);
|
|
char *e = energy_buf;
|
|
while ((unsigned char) *e == ' ') ++e;
|
|
|
|
// Report values to MQTT broker
|
|
mqttSend(getSetting("powPowerTopic", POW_POWER_TOPIC).c_str(), String(power).c_str());
|
|
mqttSend(getSetting("powEnergyTopic", POW_ENERGY_TOPIC).c_str(), e);
|
|
mqttSend(getSetting("powCurrentTopic", POW_CURRENT_TOPIC).c_str(), String(current).c_str());
|
|
mqttSend(getSetting("powVoltageTopic", POW_VOLTAGE_TOPIC).c_str(), String(voltage).c_str());
|
|
mqttSend(getSetting("powAPowerTopic", POW_APOWER_TOPIC).c_str(), String(apparent).c_str());
|
|
mqttSend(getSetting("powRPowerTopic", POW_RPOWER_TOPIC).c_str(), String(reactive).c_str());
|
|
mqttSend(getSetting("powPFactorTopic", POW_PFACTOR_TOPIC).c_str(), String(factor).c_str());
|
|
|
|
// Report values to Domoticz
|
|
#if ENABLE_DOMOTICZ
|
|
{
|
|
char buffer[20];
|
|
snprintf(buffer, 20, "%d;%s", power, e);
|
|
domoticzSend("dczPowIdx", 0, buffer);
|
|
snprintf(buffer, 20, "%s", e);
|
|
domoticzSend("dczEnergyIdx", 0, buffer);
|
|
snprintf(buffer, 20, "%d", voltage);
|
|
domoticzSend("dczVoltIdx", 0, buffer);
|
|
snprintf(buffer, 20, "%s", String(current).c_str());
|
|
domoticzSend("dczCurrentIdx", 0, buffer);
|
|
}
|
|
#endif
|
|
|
|
// Reset counters
|
|
power_sum = current_sum = voltage_sum = 0;
|
|
report_count = POW_REPORT_EVERY;
|
|
|
|
}
|
|
|
|
// Toggle between current and voltage monitoring
|
|
#if POW_USE_INTERRUPTS == 0
|
|
hlw8012.toggleMode();
|
|
#endif
|
|
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|