Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

68 lines
1.6 KiB

#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <WiFiUdp.h>
#include <ArduinoOTA.h>
const char* ssid = "...";
const char* password = "...";
const char* host = "OTA-LEDS";
int led_pin = 13;
#define N_DIMMERS 3
int dimmer_pin[] = {14, 5, 15};
void setup() {
Serial.begin(115200);
/* switch on led */
pinMode(led_pin, OUTPUT);
digitalWrite(led_pin, LOW);
Serial.println("Booting");
WiFi.mode(WIFI_STA);
WiFi.begin(ssid, password);
while (WiFi.waitForConnectResult() != WL_CONNECTED){
WiFi.begin(ssid, password);
Serial.println("Retrying connection...");
}
/* switch off led */
digitalWrite(led_pin, HIGH);
/* configure dimmers, and OTA server events */
analogWriteRange(1000);
analogWrite(led_pin,990);
for (int i=0; i<N_DIMMERS; i++)
{
pinMode(dimmer_pin[i], OUTPUT);
analogWrite(dimmer_pin[i],50);
}
ArduinoOTA.setHostname(host);
ArduinoOTA.onStart([]() { // switch off all the PWMs during upgrade
for(int i=0; i<N_DIMMERS;i++)
analogWrite(dimmer_pin[i], 0);
analogWrite(led_pin,0);
});
ArduinoOTA.onEnd([]() { // do a fancy thing with our board led at end
for (int i=0;i<30;i++)
{
analogWrite(led_pin,(i*100) % 1001);
delay(50);
}
});
ArduinoOTA.onError([](ota_error_t error) { ESP.restart(); });
/* setup the OTA server */
ArduinoOTA.begin();
Serial.println("Ready");
}
void loop() {
ArduinoOTA.handle();
}