You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
398 lines
12 KiB
398 lines
12 KiB
// -----------------------------------------------------------------------------
|
|
// CSE7766 based power monitor
|
|
// Copyright (C) 2019 by Xose Pérez <xose dot perez at gmail dot com>
|
|
// http://www.chipsea.com/UploadFiles/2017/08/11144342F01B5662.pdf
|
|
// -----------------------------------------------------------------------------
|
|
|
|
#if SENSOR_SUPPORT && CSE7766_SUPPORT
|
|
|
|
#pragma once
|
|
|
|
#include <Arduino.h>
|
|
#include <SoftwareSerial.h>
|
|
|
|
#include "../debug.h"
|
|
|
|
#include "BaseSensor.h"
|
|
#include "BaseEmonSensor.h"
|
|
|
|
class CSE7766Sensor : public BaseEmonSensor {
|
|
|
|
public:
|
|
|
|
// ---------------------------------------------------------------------
|
|
// Public
|
|
// ---------------------------------------------------------------------
|
|
|
|
CSE7766Sensor(): _data() {
|
|
_count = 7;
|
|
_sensor_id = SENSOR_CSE7766_ID;
|
|
}
|
|
|
|
~CSE7766Sensor() {
|
|
if (_serial) delete _serial;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
void setRX(unsigned char pin_rx) {
|
|
if (_pin_rx == pin_rx) return;
|
|
_pin_rx = pin_rx;
|
|
_dirty = true;
|
|
}
|
|
|
|
void setInverted(bool inverted) {
|
|
if (_inverted == inverted) return;
|
|
_inverted = inverted;
|
|
_dirty = true;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
unsigned char getRX() {
|
|
return _pin_rx;
|
|
}
|
|
|
|
bool getInverted() {
|
|
return _inverted;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
void expectedCurrent(double expected) {
|
|
if ((expected > 0) && (_current > 0)) {
|
|
_ratioC = _ratioC * (expected / _current);
|
|
}
|
|
}
|
|
|
|
void expectedVoltage(unsigned int expected) {
|
|
if ((expected > 0) && (_voltage > 0)) {
|
|
_ratioV = _ratioV * (expected / _voltage);
|
|
}
|
|
}
|
|
|
|
void expectedPower(unsigned int expected) {
|
|
if ((expected > 0) && (_active > 0)) {
|
|
_ratioP = _ratioP * (expected / _active);
|
|
}
|
|
}
|
|
|
|
void setCurrentRatio(double value) {
|
|
_ratioC = value;
|
|
};
|
|
|
|
void setVoltageRatio(double value) {
|
|
_ratioV = value;
|
|
};
|
|
|
|
void setPowerRatio(double value) {
|
|
_ratioP = value;
|
|
};
|
|
|
|
double getCurrentRatio() {
|
|
return _ratioC;
|
|
};
|
|
|
|
double getVoltageRatio() {
|
|
return _ratioV;
|
|
};
|
|
|
|
double getPowerRatio() {
|
|
return _ratioP;
|
|
};
|
|
|
|
void resetCalibration() {
|
|
_ratioC = _ratioV = _ratioP = 1.0;
|
|
}
|
|
|
|
// ---------------------------------------------------------------------
|
|
// Sensor API
|
|
// ---------------------------------------------------------------------
|
|
|
|
// Initialization method, must be idempotent
|
|
void begin() {
|
|
|
|
if (!_dirty) return;
|
|
|
|
if (_serial) delete _serial;
|
|
|
|
if (1 == _pin_rx) {
|
|
Serial.begin(CSE7766_BAUDRATE);
|
|
} else {
|
|
_serial = new SoftwareSerial(_pin_rx, SW_SERIAL_UNUSED_PIN, _inverted, 32);
|
|
_serial->enableIntTx(false);
|
|
_serial->begin(CSE7766_BAUDRATE);
|
|
}
|
|
|
|
_ready = true;
|
|
_dirty = false;
|
|
|
|
}
|
|
|
|
// Descriptive name of the sensor
|
|
String description() {
|
|
char buffer[28];
|
|
if (1 == _pin_rx) {
|
|
snprintf(buffer, sizeof(buffer), "CSE7766 @ HwSerial");
|
|
} else {
|
|
snprintf(buffer, sizeof(buffer), "CSE7766 @ SwSerial(%u,NULL)", _pin_rx);
|
|
}
|
|
return String(buffer);
|
|
}
|
|
|
|
// Descriptive name of the slot # index
|
|
String slot(unsigned char index) {
|
|
return description();
|
|
};
|
|
|
|
// Address of the sensor (it could be the GPIO or I2C address)
|
|
String address(unsigned char index) {
|
|
return String(_pin_rx);
|
|
}
|
|
|
|
// Loop-like method, call it in your main loop
|
|
void tick() {
|
|
_read();
|
|
}
|
|
|
|
// Type for slot # index
|
|
unsigned char type(unsigned char index) {
|
|
if (index == 0) return MAGNITUDE_CURRENT;
|
|
if (index == 1) return MAGNITUDE_VOLTAGE;
|
|
if (index == 2) return MAGNITUDE_POWER_ACTIVE;
|
|
if (index == 3) return MAGNITUDE_POWER_REACTIVE;
|
|
if (index == 4) return MAGNITUDE_POWER_APPARENT;
|
|
if (index == 5) return MAGNITUDE_POWER_FACTOR;
|
|
if (index == 6) return MAGNITUDE_ENERGY;
|
|
return MAGNITUDE_NONE;
|
|
}
|
|
|
|
// Current value for slot # index
|
|
double value(unsigned char index) {
|
|
if (index == 0) return _current;
|
|
if (index == 1) return _voltage;
|
|
if (index == 2) return _active;
|
|
if (index == 3) return _reactive;
|
|
if (index == 4) return _voltage * _current;
|
|
if (index == 5) return ((_voltage > 0) && (_current > 0)) ? 100 * _active / _voltage / _current : 100;
|
|
if (index == 6) return getEnergy();
|
|
return 0;
|
|
}
|
|
|
|
protected:
|
|
|
|
// ---------------------------------------------------------------------
|
|
// Protected
|
|
// ---------------------------------------------------------------------
|
|
|
|
/**
|
|
* "
|
|
* Checksum is the sum of all data
|
|
* except for packet header and packet tail lowering by 8bit (...)
|
|
* "
|
|
* @return bool
|
|
*/
|
|
bool _checksum() {
|
|
unsigned char checksum = 0;
|
|
for (unsigned char i = 2; i < 23; i++) {
|
|
checksum += _data[i];
|
|
}
|
|
return checksum == _data[23];
|
|
}
|
|
|
|
void _process() {
|
|
|
|
// Sample data:
|
|
// 55 5A 02 E9 50 00 03 31 00 3E 9E 00 0D 30 4F 44 F8 00 12 65 F1 81 76 72 (w/ load)
|
|
// F2 5A 02 E9 50 00 03 2B 00 3E 9E 02 D7 7C 4F 44 F8 CF A5 5D E1 B3 2A B4 (w/o load)
|
|
|
|
#if SENSOR_DEBUG
|
|
DEBUG_MSG("[SENSOR] CSE7766: _process: ");
|
|
for (byte i=0; i<24; i++) DEBUG_MSG("%02X ", _data[i]);
|
|
DEBUG_MSG("\n");
|
|
#endif
|
|
|
|
// Checksum
|
|
if (!_checksum()) {
|
|
_error = SENSOR_ERROR_CRC;
|
|
#if SENSOR_DEBUG
|
|
DEBUG_MSG("[SENSOR] CSE7766: Checksum error\n");
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
// Calibration
|
|
if (0xAA == _data[0]) {
|
|
_error = SENSOR_ERROR_CALIBRATION;
|
|
#if SENSOR_DEBUG
|
|
DEBUG_MSG("[SENSOR] CSE7766: Chip not calibrated\n");
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
if ((_data[0] & 0xFC) > 0xF0) {
|
|
_error = SENSOR_ERROR_OTHER;
|
|
#if SENSOR_DEBUG
|
|
if (0xF1 == (_data[0] & 0xF1)) DEBUG_MSG_P(PSTR("[SENSOR] CSE7766: Abnormal coefficient storage area\n"));
|
|
if (0xF2 == (_data[0] & 0xF2)) DEBUG_MSG_P(PSTR("[SENSOR] CSE7766: Power cycle exceeded range\n"));
|
|
if (0xF4 == (_data[0] & 0xF4)) DEBUG_MSG_P(PSTR("[SENSOR] CSE7766: Current cycle exceeded range\n"));
|
|
if (0xF8 == (_data[0] & 0xF8)) DEBUG_MSG_P(PSTR("[SENSOR] CSE7766: Voltage cycle exceeded range\n"));
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
// Calibration coefficients
|
|
unsigned long _coefV = (_data[2] << 16 | _data[3] << 8 | _data[4] ); // 190770
|
|
unsigned long _coefC = (_data[8] << 16 | _data[9] << 8 | _data[10]); // 16030
|
|
unsigned long _coefP = (_data[14] << 16 | _data[15] << 8 | _data[16]); // 5195000
|
|
|
|
// Adj: this looks like a sampling report
|
|
uint8_t adj = _data[20]; // F1 11110001
|
|
|
|
// Calculate voltage
|
|
_voltage = 0;
|
|
if ((adj & 0x40) == 0x40) {
|
|
unsigned long voltage_cycle = _data[5] << 16 | _data[6] << 8 | _data[7]; // 817
|
|
_voltage = _ratioV * _coefV / voltage_cycle / CSE7766_V2R; // 190700 / 817 = 233.41
|
|
}
|
|
|
|
// Calculate power
|
|
_active = 0;
|
|
if ((adj & 0x10) == 0x10) {
|
|
if ((_data[0] & 0xF2) != 0xF2) {
|
|
unsigned long power_cycle = _data[17] << 16 | _data[18] << 8 | _data[19]; // 4709
|
|
_active = _ratioP * _coefP / power_cycle / CSE7766_V1R / CSE7766_V2R; // 5195000 / 4709 = 1103.20
|
|
}
|
|
}
|
|
|
|
// Calculate current
|
|
_current = 0;
|
|
if ((adj & 0x20) == 0x20) {
|
|
if (_active > 0) {
|
|
unsigned long current_cycle = _data[11] << 16 | _data[12] << 8 | _data[13]; // 3376
|
|
_current = _ratioC * _coefC / current_cycle / CSE7766_V1R; // 16030 / 3376 = 4.75
|
|
}
|
|
}
|
|
|
|
// Calculate reactive power
|
|
_reactive = 0;
|
|
unsigned int active = _active;
|
|
unsigned int apparent = _voltage * _current;
|
|
if (apparent > active) {
|
|
_reactive = sqrt(apparent * apparent - active * active);
|
|
} else {
|
|
_reactive = 0;
|
|
}
|
|
|
|
// Calculate energy
|
|
uint32_t cf_pulses = _data[21] << 8 | _data[22];
|
|
|
|
static uint32_t cf_pulses_last = 0;
|
|
if (0 == cf_pulses_last) cf_pulses_last = cf_pulses;
|
|
|
|
uint32_t difference;
|
|
if (cf_pulses < cf_pulses_last) {
|
|
difference = cf_pulses + (0xFFFF - cf_pulses_last) + 1;
|
|
} else {
|
|
difference = cf_pulses - cf_pulses_last;
|
|
}
|
|
|
|
_energy[0] += sensor::Ws {
|
|
static_cast<uint32_t>(difference * (float) _coefP / 1000000.0)
|
|
};
|
|
cf_pulses_last = cf_pulses;
|
|
|
|
}
|
|
|
|
void _read() {
|
|
|
|
_error = SENSOR_ERROR_OK;
|
|
|
|
static unsigned char index = 0;
|
|
static unsigned long last = millis();
|
|
|
|
while (_serial_available()) {
|
|
|
|
// A 24 bytes message takes ~55ms to go through at 4800 bps
|
|
// Reset counter if more than 1000ms have passed since last byte.
|
|
if (millis() - last > CSE7766_SYNC_INTERVAL) index = 0;
|
|
last = millis();
|
|
|
|
uint8_t byte = _serial_read();
|
|
|
|
// first byte must be 0x55 or 0xF?
|
|
if (0 == index) {
|
|
if ((0x55 != byte) && (byte < 0xF0)) {
|
|
continue;
|
|
}
|
|
|
|
// second byte must be 0x5A
|
|
} else if (1 == index) {
|
|
if (0x5A != byte) {
|
|
index = 0;
|
|
continue;
|
|
}
|
|
}
|
|
|
|
_data[index++] = byte;
|
|
if (index > 23) {
|
|
_serial_flush();
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
// Process packet
|
|
if (24 == index) {
|
|
_process();
|
|
index = 0;
|
|
}
|
|
|
|
}
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
bool _serial_available() {
|
|
if (1 == _pin_rx) {
|
|
return Serial.available();
|
|
} else {
|
|
return _serial->available();
|
|
}
|
|
}
|
|
|
|
void _serial_flush() {
|
|
if (1 == _pin_rx) {
|
|
return Serial.flush();
|
|
} else {
|
|
return _serial->flush();
|
|
}
|
|
}
|
|
|
|
uint8_t _serial_read() {
|
|
if (1 == _pin_rx) {
|
|
return Serial.read();
|
|
} else {
|
|
return _serial->read();
|
|
}
|
|
}
|
|
|
|
// ---------------------------------------------------------------------
|
|
|
|
unsigned int _pin_rx = CSE7766_PIN;
|
|
bool _inverted = CSE7766_PIN_INVERSE;
|
|
SoftwareSerial * _serial = NULL;
|
|
|
|
double _active = 0;
|
|
double _reactive = 0;
|
|
double _voltage = 0;
|
|
double _current = 0;
|
|
|
|
double _ratioV = 1.0;
|
|
double _ratioC = 1.0;
|
|
double _ratioP = 1.0;
|
|
|
|
unsigned char _data[24];
|
|
|
|
};
|
|
|
|
#endif // SENSOR_SUPPORT && CSE7766_SUPPORT
|