Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

483 lines
20 KiB

//------------------------------------------------------------------------------
// Do not change this file unless you know what you are doing
// Configuration settings are in the settings.h file
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
// GENERAL
//------------------------------------------------------------------------------
#define ADMIN_PASS "fibonacci" // Default password (WEB, OTA, WIFI)
//------------------------------------------------------------------------------
// DEBUG
//------------------------------------------------------------------------------
// Serial debug log
#ifndef DEBUG_SERIAL_SUPPORT
#define DEBUG_SERIAL_SUPPORT 1 // Enable serial debug log
#endif
#ifndef DEBUG_PORT
#define DEBUG_PORT Serial // Default debugging port
#endif
//------------------------------------------------------------------------------
// UDP debug log
// To receive the message son the destination computer use nc:
// nc -ul 8113
#ifndef DEBUG_UDP_SUPPORT
#define DEBUG_UDP_SUPPORT 0 // Enable UDP debug log
#endif
#define DEBUG_UDP_IP IPAddress(192, 168, 1, 100)
#define DEBUG_UDP_PORT 8113
//------------------------------------------------------------------------------
// General debug options and macros
#define DEBUG_MESSAGE_MAX_LENGTH 80
#if (DEBUG_SERIAL_SUPPORT==1) || (DEBUG_UDP_SUPPORT==1)
#define DEBUG_MSG(...) debugSend(__VA_ARGS__)
#define DEBUG_MSG_P(...) debugSend_P(__VA_ARGS__)
#endif
#ifndef DEBUG_MSG
#define DEBUG_MSG(...)
#define DEBUG_MSG_P(...)
#endif
//------------------------------------------------------------------------------
// TERMINAL
//------------------------------------------------------------------------------
#ifndef TERMINAL_SUPPORT
#define TERMINAL_SUPPORT 1 // Enable terminal commands
#endif
//------------------------------------------------------------------------------
// EEPROM
//------------------------------------------------------------------------------
#define EEPROM_SIZE 4096 // EEPROM size in bytes
#define EEPROM_RELAY_STATUS 0 // Address for the relay status (1 byte)
#define EEPROM_ENERGY_COUNT 1 // Address for the energy counter (4 bytes)
#define EEPROM_CUSTOM_RESET 5 // Address for the reset reason (1 byte)
#define EEPROM_DATA_END 6 // End of custom EEPROM data block
//------------------------------------------------------------------------------
// HEARTBEAT
//------------------------------------------------------------------------------
#define HEARTBEAT_INTERVAL 300000 // Interval between heartbeat messages (in ms)
#define UPTIME_OVERFLOW 4294967295 // Uptime overflow value
// Topics that will be reported in heartbeat
#define HEARTBEAT_REPORT_STATUS 1
#define HEARTBEAT_REPORT_IP 1
#define HEARTBEAT_REPORT_MAC 1
#define HEARTBEAT_REPORT_RSSI 1
#define HEARTBEAT_REPORT_UPTIME 1
#define HEARTBEAT_REPORT_FREEHEAP 1
#define HEARTBEAT_REPORT_VCC 1
#define HEARTBEAT_REPORT_RELAY 1
#define HEARTBEAT_REPORT_LIGHT 1
#define HEARTBEAT_REPORT_HOSTNAME 1
#define HEARTBEAT_REPORT_APP 1
#define HEARTBEAT_REPORT_VERSION 1
#define HEARTBEAT_REPORT_INTERVAL 0
//------------------------------------------------------------------------------
// RESET
//------------------------------------------------------------------------------
#define CUSTOM_RESET_HARDWARE 1 // Reset from hardware button
#define CUSTOM_RESET_WEB 2 // Reset from web interface
#define CUSTOM_RESET_TERMINAL 3 // Reset from terminal
#define CUSTOM_RESET_MQTT 4 // Reset via MQTT
#define CUSTOM_RESET_RPC 5 // Reset via RPC (HTTP)
#define CUSTOM_RESET_OTA 6 // Reset after successful OTA update
#define CUSTOM_RESET_NOFUSS 8 // Reset after successful NOFUSS update
#define CUSTOM_RESET_UPGRADE 9 // Reset after update from web interface
#define CUSTOM_RESET_FACTORY 10 // Factory reset from terminal
#define CUSTOM_RESET_MAX 10
#include <pgmspace.h>
PROGMEM const char custom_reset_hardware[] = "Hardware button";
PROGMEM const char custom_reset_web[] = "Reset from web interface";
PROGMEM const char custom_reset_terminal[] = "Reset from terminal";
PROGMEM const char custom_reset_mqtt[] = "Reset from MQTT";
PROGMEM const char custom_reset_rpc[] = "Reset from RPC";
PROGMEM const char custom_reset_ota[] = "Reset after successful OTA update";
PROGMEM const char custom_reset_nofuss[] = "Reset after successful NoFUSS update";
PROGMEM const char custom_reset_upgrade[] = "Reset after successful web update";
PROGMEM const char custom_reset_factory[] = "Factory reset";
PROGMEM const char* const custom_reset_string[] = {
custom_reset_hardware, custom_reset_web, custom_reset_terminal,
custom_reset_mqtt, custom_reset_rpc, custom_reset_ota,
custom_reset_nofuss, custom_reset_upgrade, custom_reset_factory
};
//------------------------------------------------------------------------------
// BUTTON
//------------------------------------------------------------------------------
#define BUTTON_DEBOUNCE_DELAY 50 // Debounce delay (ms)
#define BUTTON_DBLCLICK_DELAY 500 // Time in ms to wait for a second (or third...) click
#define BUTTON_LNGCLICK_DELAY 1000 // Time in ms holding the button down to get a long click
#define BUTTON_LNGLNGCLICK_DELAY 10000 // Time in ms holding the button down to get a long-long click
#define BUTTON_EVENT_NONE 0
#define BUTTON_EVENT_PRESSED 1
#define BUTTON_EVENT_RELEASED 2
#define BUTTON_EVENT_CLICK 2
#define BUTTON_EVENT_DBLCLICK 3
#define BUTTON_EVENT_LNGCLICK 4
#define BUTTON_EVENT_LNGLNGCLICK 5
#define BUTTON_MODE_NONE 0
#define BUTTON_MODE_TOGGLE 1
#define BUTTON_MODE_ON 2
#define BUTTON_MODE_OFF 3
#define BUTTON_MODE_AP 4
#define BUTTON_MODE_RESET 5
#define BUTTON_MODE_PULSE 6
#define BUTTON_MODE_FACTORY 7
//------------------------------------------------------------------------------
// RELAY
//------------------------------------------------------------------------------
#define RELAY_MODE_OFF 0
#define RELAY_MODE_ON 1
#define RELAY_MODE_SAME 2
#define RELAY_MODE_TOOGLE 3
#define RELAY_TYPE_NORMAL 0
#define RELAY_TYPE_INVERSE 1
#define RELAY_TYPE_LATCHED 2
#define RELAY_SYNC_ANY 0
#define RELAY_SYNC_NONE_OR_ONE 1
#define RELAY_SYNC_ONE 2
#define RELAY_SYNC_SAME 3
#define RELAY_PULSE_NONE 0
#define RELAY_PULSE_OFF 1
#define RELAY_PULSE_ON 2
#define RELAY_PROVIDER_RELAY 0
#define RELAY_PROVIDER_DUAL 1
#define RELAY_PROVIDER_LIGHT 2
#define RELAY_PROVIDER_RFBRIDGE 3
// Pulse time in milliseconds
#define RELAY_PULSE_TIME 1.0
// 0 means OFF, 1 ON and 2 whatever was before
#define RELAY_MODE RELAY_MODE_OFF
// 0 means ANY, 1 zero or one and 2 one and only one
#define RELAY_SYNC RELAY_SYNC_ANY
// 0 means no pulses, 1 means normally off, 2 normally on
#define RELAY_PULSE_MODE RELAY_PULSE_NONE
// Relay requests flood protection window - in seconds
#define RELAY_FLOOD_WINDOW 3
// Allowed actual relay changes inside requests flood protection window
#define RELAY_FLOOD_CHANGES 5
// Pulse with in milliseconds for a latched relay
#define RELAY_LATCHING_PULSE 10
// Do not save relay state after these many milliseconds
#define RELAY_SAVE_DELAY 1000
//------------------------------------------------------------------------------
// I18N
//------------------------------------------------------------------------------
#define TMP_CELSIUS 0
#define TMP_FAHRENHEIT 1
#define TMP_UNITS TMP_CELSIUS // Temperature units (TMP_CELSIUS | TMP_FAHRENHEIT)
//------------------------------------------------------------------------------
// LED
//------------------------------------------------------------------------------
// All defined LEDs in the board can be managed through MQTT
// except the first one when LED_AUTO is set to 1.
// If LED_AUTO is set to 1 the board will a defined LED to show wifi status.
#define LED_AUTO 1
// LED # to use as WIFI status indicator
#ifndef LED_WIFI
#define LED_WIFI 1
#endif
// -----------------------------------------------------------------------------
// WIFI
// -----------------------------------------------------------------------------
#define WIFI_CONNECT_TIMEOUT 30000 // Connecting timeout for WIFI in ms
#define WIFI_RECONNECT_INTERVAL 120000 // If could not connect to WIFI, retry after this time in ms
#define WIFI_MAX_NETWORKS 5 // Max number of WIFI connection configurations
#define WIFI_AP_MODE AP_MODE_ALONE
// Optional hardcoded configuration (up to 2 different networks)
//#define WIFI1_SSID "..."
//#define WIFI1_PASS "..."
//#define WIFI1_IP "192.168.1.201"
//#define WIFI1_GW "192.168.1.1"
//#define WIFI1_MASK "255.255.255.0"
//#define WIFI1_DNS "8.8.8.8"
//#define WIFI2_SSID "..."
//#define WIFI2_PASS "..."
// -----------------------------------------------------------------------------
// WEB
// -----------------------------------------------------------------------------
#ifndef WEB_SUPPORT
#define WEB_SUPPORT 1 // Enable web support (http, api)
#endif
#ifndef WEB_EMBEDDED
#define WEB_EMBEDDED 1 // Build the firmware with the web interface embedded in
#endif
// This is not working at the moment!!
// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core staging version.
#define WEB_SSL_ENABLED 0 // Use HTTPS web interface
#define WEB_MODE_NORMAL 0
#define WEB_MODE_PASSWORD 1
#define WEB_USERNAME "admin" // HTTP username
#define WEB_FORCE_PASS_CHANGE 1 // Force the user to change the password if default one
#define WEB_PORT 80 // HTTP port
// -----------------------------------------------------------------------------
// WEBSOCKETS
// -----------------------------------------------------------------------------
// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)
#define WS_BUFFER_SIZE 5 // Max number of secured websocket connections
#define WS_TIMEOUT 1800000 // Timeout for secured websocket
// -----------------------------------------------------------------------------
// API
// -----------------------------------------------------------------------------
// This will only be enabled if WEB_SUPPORT is 1 (this is the default value)
#define API_ENABLED 0 // Do not enable API by default
#define API_BUFFER_SIZE 10 // Size of the buffer for HTTP GET API responses
// -----------------------------------------------------------------------------
// MDNS
// -----------------------------------------------------------------------------
#define MDNS_SUPPORT 1 // Enable MDNS by default
// -----------------------------------------------------------------------------
// SPIFFS
// -----------------------------------------------------------------------------
// Do not add support for SPIFFS by default
#ifndef SPIFFS_SUPPORT
#define SPIFFS_SUPPORT 0
#endif
// -----------------------------------------------------------------------------
// OTA
// -----------------------------------------------------------------------------
#define OTA_PORT 8266 // OTA port
// -----------------------------------------------------------------------------
// NOFUSS
// -----------------------------------------------------------------------------
#define NOFUSS_SERVER "" // Default NoFuss Server
#define NOFUSS_INTERVAL 3600000 // Check for updates every hour
// -----------------------------------------------------------------------------
// MQTT
// -----------------------------------------------------------------------------
#ifndef MQTT_USE_ASYNC
#define MQTT_USE_ASYNC 1 // Use AysncMQTTClient (1) or PubSubClient (0)
#endif
// MQTT OVER SSL
// Using MQTT over SSL works pretty well but generates problems with the web interface.
// It could be a good idea to use it in conjuntion with WEB_SUPPORT=0.
// Requires ASYNC_TCP_SSL_ENABLED to 1 and ESP8266 Arduino Core staging version.
// Right now only available when MQTT_USE_ASYNC=1 (default value).
// You will need the fingerprint for your MQTT server, example for CloudMQTT:
// $ echo -n | openssl s_client -connect m11.cloudmqtt.com:24055 > cloudmqtt.pem
// $ openssl x509 -noout -in cloudmqtt.pem -fingerprint -sha1
#define MQTT_SSL_ENABLED 0
#define MQTT_SSL_FINGERPRINT ""
#define MQTT_SERVER "" // Default MQTT broker address
#define MQTT_PORT 1883 // MQTT broker port
#define MQTT_TOPIC "/test/switch/{identifier}" // Default MQTT base topic
#define MQTT_RETAIN true // MQTT retain flag
#define MQTT_QOS 0 // MQTT QoS value for all messages
#define MQTT_KEEPALIVE 30 // MQTT keepalive value
#define MQTT_RECONNECT_DELAY 10000 // Try to reconnect after 10s
#define MQTT_TRY_INTERVAL 30000 // Timeframe for disconnect retries
#define MQTT_MAX_TRIES 12 // After these many retries during the previous MQTT_TRY_INTERVAL the board will reset
#define MQTT_SKIP_RETAINED 1 // Skip retained messages on connection
#define MQTT_SKIP_TIME 1000 // Skip messages for 1 second anter connection
#define MQTT_USE_JSON 0 // Group messages in a JSON body
#define MQTT_USE_JSON_DELAY 100 // Wait this many ms before grouping messages
// These particles will be concatenated to the MQTT_TOPIC base to form the actual topic
#define MQTT_TOPIC_JSON "data"
#define MQTT_TOPIC_ACTION "action"
#define MQTT_TOPIC_RELAY "relay"
#define MQTT_TOPIC_LED "led"
#define MQTT_TOPIC_BUTTON "button"
#define MQTT_TOPIC_IP "ip"
#define MQTT_TOPIC_VERSION "version"
#define MQTT_TOPIC_UPTIME "uptime"
#define MQTT_TOPIC_FREEHEAP "freeheap"
#define MQTT_TOPIC_VCC "vcc"
#define MQTT_TOPIC_STATUS "status"
#define MQTT_TOPIC_MAC "mac"
#define MQTT_TOPIC_RSSI "rssi"
#define MQTT_TOPIC_APP "app"
#define MQTT_TOPIC_INTERVAL "interval"
#define MQTT_TOPIC_HOSTNAME "host"
#define MQTT_TOPIC_TIME "time"
#define MQTT_TOPIC_ANALOG "analog"
#define MQTT_TOPIC_RFOUT "rfout"
#define MQTT_TOPIC_RFIN "rfin"
#define MQTT_TOPIC_RFLEARN "rflearn"
// Lights
#define MQTT_TOPIC_CHANNEL "channel"
#define MQTT_TOPIC_COLOR "color"
#define MQTT_TOPIC_BRIGHTNESS "brightness"
#define MQTT_TOPIC_MIRED "mired"
#define MQTT_TOPIC_KELVIN "kelvin"
#define MQTT_STATUS_ONLINE "1" // Value for the device ON message
#define MQTT_STATUS_OFFLINE "0" // Value for the device OFF message (will)
#define MQTT_ACTION_RESET "reset" // RESET MQTT topic particle
// Internal MQTT events (do not change)
#define MQTT_CONNECT_EVENT 0
#define MQTT_DISCONNECT_EVENT 1
#define MQTT_MESSAGE_EVENT 2
// Custom get and set postfixes
// Use something like "/status" or "/set", with leading slash
// Since 1.9.0 the default value is "" for getter and "/set" for setter
#define MQTT_USE_GETTER ""
#define MQTT_USE_SETTER "/set"
// -----------------------------------------------------------------------------
// I2C
// -----------------------------------------------------------------------------
#ifndef I2C_SUPPORT
#define I2C_SUPPORT 0 // I2C enabled
#endif
#define I2C_SDA_PIN 4 // SDA GPIO
#define I2C_SCL_PIN 14 // SCL GPIO
#define I2C_CLOCK_STRETCH_TIME 200 // BRZO clock stretch time
#define I2C_SCL_FREQUENCY 1000 // BRZO SCL frequency
// -----------------------------------------------------------------------------
// LIGHT
// -----------------------------------------------------------------------------
#define LIGHT_PROVIDER_NONE 0
#define LIGHT_PROVIDER_MY9192 1
#define LIGHT_PROVIDER_DIMMER 2
// LIGHT_PROVIDER_DIMMER can have from 1 to 5 different channels.
// They have to be defined for each device in the hardware.h file.
// If 3 or more channels first 3 will be considered RGB.
// Usual configurations are:
// 1 channels => W
// 2 channels => WW
// 3 channels => RGB
// 4 channels => RGBW
// 5 channels => RGBWW
#define LIGHT_SAVE_DELAY 5 // Persist color after 5 seconds to avoid wearing out
#define LIGHT_PWM_FREQUENCY 1000 // PWM frequency
#define LIGHT_MAX_PWM 4095 // Maximum PWM value
#define LIGHT_MAX_VALUE 255 // Maximum light value
#define LIGHT_MAX_BRIGHTNESS 255 // Maximun brightness value
#define LIGHT_USE_COLOR 1 // Use 3 first channels as RGB
#define LIGHT_USE_WHITE 0 // Use white channel whenever RGB have the same value
#define LIGHT_USE_GAMMA 0 // Use gamma correction for color channels
// -----------------------------------------------------------------------------
// DOMOTICZ
// -----------------------------------------------------------------------------
#ifndef DOMOTICZ_SUPPORT
#define DOMOTICZ_SUPPORT 1 // Build with domoticz support
#endif
#define DOMOTICZ_ENABLED 0 // Disable domoticz by default
#define DOMOTICZ_IN_TOPIC "domoticz/in" // Default subscription topic
#define DOMOTICZ_OUT_TOPIC "domoticz/out" // Default publication topic
// -----------------------------------------------------------------------------
// INFLUXDB
// -----------------------------------------------------------------------------
#ifndef INFLUXDB_SUPPORT
#define INFLUXDB_SUPPORT 1 // Enable InfluxDB support by default
#endif
#define INFLUXDB_PORT 8086 // Default InfluxDB port
// -----------------------------------------------------------------------------
// NTP
// -----------------------------------------------------------------------------
#define NTP_SERVER "pool.ntp.org" // Default NTP server
#define NTP_TIME_OFFSET 1 // Default timezone offset (GMT+1)
#define NTP_DAY_LIGHT true // Enable daylight time saving by default
#define NTP_UPDATE_INTERVAL 1800 // NTP check every 30 minutes
// -----------------------------------------------------------------------------
// FAUXMO
// -----------------------------------------------------------------------------
// This setting defines whether Alexa support should be built into the firmware
#ifndef ALEXA_SUPPORT
#define ALEXA_SUPPORT 1
#endif
// This is default value for the alexaEnabled setting that defines whether
// this device should be discoberable and respond to Alexa commands.
// Both ALEXA_SUPPORT and alexaEnabled should be 1 for Alexa support to work.
#define ALEXA_ENABLED 1
// -----------------------------------------------------------------------------
// RFBRIDGE
// -----------------------------------------------------------------------------
#define RF_SEND_TIMES 4 // How many times to send the message
#define RF_SEND_DELAY 250 // Interval between sendings in ms