mh
/
mhsw-espurna


								// -----------------------------------------------------------------------------

								// Configuration HELP

								// -----------------------------------------------------------------------------

								//

								// MANUFACTURER: Name of the manufacturer of the board ("string")

								// DEVICE: Name of the device ("string")

								// BUTTON#_PIN: GPIO for the n-th button (1-based, up to 4 buttons)

								// BUTTON#_RELAY: Relay number that will be bind to the n-th button (1-based)

								// BUTTON#_MODE: A mask of options (BUTTON_PUSHBUTTON and BUTTON_SWITCH cannot be together)

								//   - BUTTON_PUSHBUTTON: button event is fired when released

								//   - BUTTON_SWITCH: button event is fired when pressed or released

								//   - BUTTON_DEFAULT_HIGH: there is a pull up in place

								//   - BUTTON_SET_PULLUP: set pullup by software

								// RELAY#_PIN: GPIO for the n-th relay (1-based, up to 4 relays)

								// RELAY#_TYPE: Relay can be RELAY_TYPE_NORMAL, RELAY_TYPE_INVERSE or RELAY_TYPE_LATCHED

								// RELAY#_LED: LED number that will be bind to the n-th relay (1-based)

								// LED#_PIN: GPIO for the n-th LED (1-based, up to 4 LEDs)

								// LED#_PIN_INVERSE: LED has inversed logic (lit when pulled down)

								//

								// Besides, other hardware specific information should be stated here


								// -----------------------------------------------------------------------------

								// Development boards

								// -----------------------------------------------------------------------------


								#if defined(NODEMCU_LOLIN)


								    // Info

								    #define MANUFACTURER        "NODEMCU"

								    #define DEVICE              "LOLIN"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								#elif defined(WEMOS_D1_MINI_RELAYSHIELD)


								    // Info

								    #define MANUFACTURER        "WEMOS"

								    #define DEVICE              "D1_MINI_RELAYSHIELD"


								    // Buttons

								    // No buttons on the D1 MINI alone, but defining it without adding a button doen't create problems

								    #define BUTTON1_PIN         0   // Connect a pushbutton between D3 and GND,

								                                    // it's the same as using a Wemos one button shield

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          5

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								// -----------------------------------------------------------------------------

								// ESPurna

								// -----------------------------------------------------------------------------


								#elif defined(TINKERMAN_ESPURNA_H06)


								    // Info

								    #define MANUFACTURER        "TINKERMAN"

								    #define DEVICE              "ESPURNA_H06"


								    // Buttons

								    #define BUTTON1_PIN         4

								    #define BUTTON1_RELAY       1


								    #ifdef USE_TOUCH_BUTTON


								        // Touch button

								        #define BUTTON1_MODE            BUTTON_PUSHBUTTON

								        #define BUTTON1_PRESS           BUTTON_MODE_TOGGLE

								        #define BUTTON1_CLICK           BUTTON_MODE_NONE

								        #define BUTTON1_DBLCLICK        BUTTON_MODE_NONE

								        #define BUTTON1_LNGCLICK        BUTTON_MODE_NONE

								        #define BUTTON1_LNGLNGCLICK     BUTTON_MODE_NONE


								    #else


								        // Normal pushbutton

								        #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #endif


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_INVERSE


								    // LEDs

								    #define LED1_PIN            5

								    #define LED1_PIN_INVERSE    0


								    // HLW8012

								    #define POWER_PROVIDER      POWER_PROVIDER_HLW8012

								    #define HLW8012_SEL_PIN     2

								    #define HLW8012_CF1_PIN     13

								    #define HLW8012_CF_PIN      14


								#elif defined(TINKERMAN_ESPURNA_H07)


								    // Info

								    #define MANUFACTURER        "TINKERMAN"

								    #define DEVICE              "ESPURNA_H07"


								    // Buttons

								    #define BUTTON1_PIN         4

								    #define BUTTON1_RELAY       1


								    #ifdef USE_TOUCH_BUTTON


								        // Touch button

								        #define BUTTON1_MODE            BUTTON_PUSHBUTTON

								        #define BUTTON1_PRESS           BUTTON_MODE_TOGGLE

								        #define BUTTON1_CLICK           BUTTON_MODE_NONE

								        #define BUTTON1_DBLCLICK        BUTTON_MODE_NONE

								        #define BUTTON1_LNGCLICK        BUTTON_MODE_NONE

								        #define BUTTON1_LNGLNGCLICK     BUTTON_MODE_NONE


								    #else


								        // Normal pushbutton

								        #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #endif


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    0


								    // HLW8012

								    #define POWER_PROVIDER      POWER_PROVIDER_HLW8012

								    #define HLW8012_SEL_PIN     5

								    #define HLW8012_CF1_PIN     13

								    #define HLW8012_CF_PIN      14


								// -----------------------------------------------------------------------------

								// Itead Studio boards

								// -----------------------------------------------------------------------------


								#elif defined(ITEAD_SONOFF_BASIC)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_BASIC"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_RF)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_RF"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_TH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_TH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_SV)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_SV"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SLAMPHER)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SLAMPHER"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_S20)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "S20"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_TOUCH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_TOUCH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_POW)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_POW"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            15

								    #define LED1_PIN_INVERSE    0


								    // HLW8012

								    #define POWER_PROVIDER      POWER_PROVIDER_HLW8012

								    #define HLW8012_SEL_PIN     5

								    #define HLW8012_CF1_PIN     13

								    #define HLW8012_CF_PIN      14


								#elif defined(ITEAD_SONOFF_DUAL)


								    // Info

								    #define MANUFACTURER            "ITEAD"

								    #define DEVICE                  "SONOFF_DUAL"

								    #define SERIAL_BAUDRATE         19230

								    #define RELAY_PROVIDER          RELAY_PROVIDER_DUAL

								    #define DUMMY_RELAY_COUNT       2

								    #define DEBUG_SERIAL_SUPPORT    0

								    #define TERMINAL_SUPPORT        0


								    // Buttons

								    #define BUTTON3_RELAY       1


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_4CH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_4CH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON2_PIN         9

								    #define BUTTON3_PIN         10

								    #define BUTTON4_PIN         14


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON3_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON4_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2

								    #define BUTTON3_RELAY       3

								    #define BUTTON4_RELAY       4


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          5

								    #define RELAY3_PIN          4

								    #define RELAY4_PIN          15


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY3_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY4_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_4CH_PRO)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_4CH_PRO"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON2_PIN         9

								    #define BUTTON3_PIN         10

								    #define BUTTON4_PIN         14


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON3_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON4_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2

								    #define BUTTON3_RELAY       3

								    #define BUTTON4_RELAY       4


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          5

								    #define RELAY3_PIN          4

								    #define RELAY4_PIN          15


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY3_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY4_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_1CH_INCHING)


								    // The inching functionality is managed by a misterious IC in the board.

								    // You cannot control the inching button and functionality from the ESP8266

								    // Besides, enabling the inching functionality using the hardware button

								    // will result in the relay switching on and off continuously.

								    // Fortunately the unkown IC keeps memory of the hardware inching status

								    // so you can just disable it and forget. The inching LED must be lit.

								    // You can still use the pulse options from the web interface

								    // without problem.


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "1CH_INCHING"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_MOTOR)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "MOTOR"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_BNSZ01)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "BNSZ01"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								    // Channels

								    #define LIGHT_CH1_PIN       12

								    #define LIGHT_CH1_INVERSE   0


								#elif defined(ITEAD_SONOFF_RFBRIDGE)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_RFBRIDGE"

								    #define SERIAL_BAUDRATE     19200

								    #define RELAY_PROVIDER      RELAY_PROVIDER_RFBRIDGE

								    #ifndef DUMMY_RELAY_COUNT

								    #define DUMMY_RELAY_COUNT   6

								    #endif

								    #define TERMINAL_SUPPORT    0

								    #define TRACK_RELAY_STATUS  0


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_B1)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_B1"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_MY9192

								    #define DUMMY_RELAY_COUNT   1

								    #define MY9291_DI_PIN       12

								    #define MY9291_DCKI_PIN     14

								    #define MY9291_COMMAND      MY9291_COMMAND_DEFAULT

								    #define MY9291_CHANNELS     5


								#elif defined(ITEAD_SONOFF_LED)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_LED"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								    // Channels

								    #define LIGHT_CH1_PIN       12  // Cold white

								    #define LIGHT_CH2_PIN       14  // Warm white


								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0


								#elif defined(ITEAD_SONOFF_T1_1CH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_T1_1CH"


								    // Buttons

								    #define BUTTON1_PIN         9

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          5

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_T1_2CH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_T1_2CH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON2_PIN         10


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          4


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_T1_3CH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_T1_3CH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON2_PIN         9

								    #define BUTTON3_PIN         10


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON3_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2

								    #define BUTTON3_RELAY       3


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          5

								    #define RELAY3_PIN          4


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY3_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								// -----------------------------------------------------------------------------

								// Electrodragon boards

								// -----------------------------------------------------------------------------


								#elif defined(ELECTRODRAGON_WIFI_IOT)


								    // Info

								    #define MANUFACTURER        "ELECTRODRAGON"

								    #define DEVICE              "WIFI_IOT"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON2_PIN         2


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          13


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            16

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// WorkChoice ecoPlug

								// -----------------------------------------------------------------------------


								#elif defined(WORKCHOICE_ECOPLUG)


								    // Info

								    #define MANUFACTURER        "WORKCHOICE"

								    #define DEVICE              "ECOPLUG"


								    // Buttons

								    #define BUTTON1_PIN         13

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          15

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// AI Thinker

								// -----------------------------------------------------------------------------


								#elif defined(AITHINKER_AI_LIGHT)


								    // Info

								    #define MANUFACTURER        "AITHINKER"

								    #define DEVICE              "AI_LIGHT"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_MY9192

								    #define DUMMY_RELAY_COUNT   1

								    #define MY9291_DI_PIN       13

								    #define MY9291_DCKI_PIN     15

								    #define MY9291_COMMAND      MY9291_COMMAND_DEFAULT

								    #define MY9291_CHANNELS     4


								// -----------------------------------------------------------------------------

								// LED Controller

								// -----------------------------------------------------------------------------


								#elif defined(MAGICHOME_LED_CONTROLLER)


								    // Info

								    #define MANUFACTURER        "MAGICHOME"

								    #define DEVICE              "LED_CONTROLLER"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								    // Channels

								    #define LIGHT_CH1_PIN       14      // RED

								    #define LIGHT_CH2_PIN       5       // GREEN

								    #define LIGHT_CH3_PIN       12      // BLUE

								    #define LIGHT_CH4_PIN       13      // WHITE


								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0


								#elif defined(MAGICHOME_LED_CONTROLLER_20)


								    // Info

								    #define MANUFACTURER        "MAGICHOME"

								    #define DEVICE              "LED_CONTROLLER_20"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								    // Channels

								    #define LIGHT_CH1_PIN       5       // RED

								    #define LIGHT_CH2_PIN       12      // GREEN

								    #define LIGHT_CH3_PIN       13      // BLUE

								    #define LIGHT_CH4_PIN       15      // WHITE


								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0


								    #define LIGHT_IR_PIN        4    // IR LED

								    #define LIGHT_PROVIDER_EXPERIMENTAL_RGB_ONLY_HSV_IR  0


								    // 24 Buttons Set of the IR Remote

								    #ifndef IR_BUTTONS_SET

								    #define IR_BUTTONS_SET      1

								    #endif


								    //Remote Buttons SET 1 (for the original Remote shipped with the controller)

								    #if IR_BUTTONS_SET == 1

								        #define IR_BUTTON_0  0xFF906F // Brightness +

								        #define IR_BUTTON_1  0xFFB847 // Brightness -

								        #define IR_BUTTON_2  0xFFF807 // OFF

								        #define IR_BUTTON_3  0xFFB04F // ON


								        #define IR_BUTTON_4  0xFF9867 // RED

								        #define IR_BUTTON_5  0xFFD827 // GREEN

								        #define IR_BUTTON_6  0xFF8877 // BLUE

								        #define IR_BUTTON_7  0xFFA857 // WHITE


								        #define IR_BUTTON_8  0xFFE817 // "Red" 1

								        #define IR_BUTTON_9  0xFF48B7 // "Green" 1

								        #define IR_BUTTON_10 0xFF6897 // "Blue" 1

								        #define IR_BUTTON_11 0xFFB24D // FLASH Mode


								        #define IR_BUTTON_12 0xFF02FD // "Red" 2

								        #define IR_BUTTON_13 0xFF32CD // "Green" 2

								        #define IR_BUTTON_14 0xFF20DF // "Blue" 2

								        #define IR_BUTTON_15 0xFF00FF // STROBE Mode


								        #define IR_BUTTON_16 0xFF50AF // "Red" 3

								        #define IR_BUTTON_17 0xFF7887 // "Green" 3

								        #define IR_BUTTON_18 0xFF708F // "Blue" 3

								        #define IR_BUTTON_19 0xFF58A7 // FADE Mode


								        #define IR_BUTTON_20 0xFF38C7 // "Red" 4

								        #define IR_BUTTON_21 0xFF28D7 // "Green" 4

								        #define IR_BUTTON_22 0xFFF00F // "Blue" 4

								        #define IR_BUTTON_23 0xFF30CF // SMOOTH Mode

								    #endif


								    //Remote Buttons SET 2 (another identical IR Remote shipped with another controller)

								    #if IR_BUTTONS_SET == 2

								        #define IR_BUTTON_0  0xFF00FF // Brightness +

								        #define IR_BUTTON_1  0xFF807F // Brightness -

								        #define IR_BUTTON_2  0xFF40BF // OFF

								        #define IR_BUTTON_3  0xFFC03F // ON


								        #define IR_BUTTON_4  0xFF20DF // RED

								        #define IR_BUTTON_5  0xFFA05F // GREEN

								        #define IR_BUTTON_6  0xFF609F // BLUE

								        #define IR_BUTTON_7  0xFFE01F // WHITE


								        #define IR_BUTTON_8  0xFF10EF // "Red" 1

								        #define IR_BUTTON_9  0xFF906F // "Green" 1

								        #define IR_BUTTON_10 0xFF50AF // "Blue" 1

								        #define IR_BUTTON_11 0xFFD02F // FLASH Mode


								        #define IR_BUTTON_12 0xFF30CF // "Red" 2

								        #define IR_BUTTON_13 0xFFB04F // "Green" 2

								        #define IR_BUTTON_14 0xFF708F // "Blue" 2

								        #define IR_BUTTON_15 0xFFF00F // STROBE Mode


								        #define IR_BUTTON_16 0xFF08F7 // "Red" 3

								        #define IR_BUTTON_17 0xFF8877 // "Green" 3

								        #define IR_BUTTON_18 0xFF48B7 // "Blue" 3

								        #define IR_BUTTON_19 0xFFC837 // FADE Mode


								        #define IR_BUTTON_20 0xFF28D7 // "Red" 4

								        #define IR_BUTTON_21 0xFFA857 // "Green" 4

								        #define IR_BUTTON_22 0xFF6897 // "Blue" 4

								        #define IR_BUTTON_23 0xFFE817 // SMOOTH Mode

								    #endif


								// -----------------------------------------------------------------------------

								// HUACANXING H801 & H802

								// -----------------------------------------------------------------------------


								#elif defined(HUACANXING_H801)


								    // Info

								    #define MANUFACTURER        "HUACANXING"

								    #define DEVICE              "H801"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // LEDs

								    #define LED1_PIN            5

								    #define LED1_PIN_INVERSE    1


								    // Channels

								    #define LIGHT_CH1_PIN       15      // RED

								    #define LIGHT_CH2_PIN       13      // GREEN

								    #define LIGHT_CH3_PIN       12      // BLUE

								    #define LIGHT_CH4_PIN       14      // WHITE1

								    #define LIGHT_CH5_PIN       4       // WHITE2


								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0

								    #define LIGHT_CH5_INVERSE   0


								#elif defined(HUACANXING_H802)


								    // Info

								    #define MANUFACTURER        "HUACANXING"

								    #define DEVICE              "H802"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // Channels

								    #define LIGHT_CH1_PIN       12      // RED

								    #define LIGHT_CH2_PIN       14      // GREEN

								    #define LIGHT_CH3_PIN       13      // BLUE

								    #define LIGHT_CH4_PIN       15      // WHITE


								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0


								// -----------------------------------------------------------------------------

								// Jan Goedeke Wifi Relay

								// https://github.com/JanGoe/esp8266-wifi-relay

								// -----------------------------------------------------------------------------


								#elif defined(JANGOE_WIFI_RELAY_NC)


								    // Info

								    #define MANUFACTURER        "JANGOE"

								    #define DEVICE              "WIFI_RELAY_NC"


								    // Buttons

								    #define BUTTON1_PIN         12

								    #define BUTTON2_PIN         13


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2


								    // Relays

								    #define RELAY1_PIN          2

								    #define RELAY2_PIN          14


								    #define RELAY1_TYPE         RELAY_TYPE_INVERSE

								    #define RELAY2_TYPE         RELAY_TYPE_INVERSE


								#elif defined(JANGOE_WIFI_RELAY_NO)


								    // Info

								    #define MANUFACTURER        "JANGOE"

								    #define DEVICE              "WIFI_RELAY_NO"


								    // Buttons

								    #define BUTTON1_PIN         12

								    #define BUTTON2_PIN         13


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2


								    // Relays

								    #define RELAY1_PIN          2

								    #define RELAY2_PIN          14


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL


								// -----------------------------------------------------------------------------

								// Jorge García Wifi+Relays Board Kit

								// https://www.tindie.com/products/jorgegarciadev/wifi--relays-board-kit

								// https://github.com/jorgegarciadev/wifikit

								// -----------------------------------------------------------------------------


								#elif defined(JORGEGARCIA_WIFI_RELAYS)


								    // Info

								    #define MANUFACTURER        "JORGEGARCIA"

								    #define DEVICE              "WIFI_RELAYS"


								    // Relays

								    #define RELAY1_PIN          0

								    #define RELAY2_PIN          2


								    #define RELAY1_TYPE         RELAY_TYPE_INVERSE

								    #define RELAY2_TYPE         RELAY_TYPE_INVERSE


								// -----------------------------------------------------------------------------

								// WiFi MQTT Relay / Thermostat

								// -----------------------------------------------------------------------------


								#elif defined(OPENENERGYMONITOR_MQTT_RELAY)


								    // Info

								    #define MANUFACTURER        "OPENENERGYMONITOR"

								    #define DEVICE              "MQTT_RELAY"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            16

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// WiOn 50055 Indoor Wi-Fi Wall Outlet & Tap

								// https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50050-Indoor-Wi-Fi-Outlet-Wireless-Switch-Programmable-Timer-%2F263112281551

								// https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50055-Indoor-Wi-Fi-Wall-Tap-Monitor-Energy-Usage-Wireless-Smart-Switch-%2F263020837777

								// -----------------------------------------------------------------------------


								#elif defined(WION_50055)


								    // Currently untested, does not support energy monitoring


								    // Info

								    #define MANUFACTURER        "WION"

								    #define DEVICE              "50055"


								    // Buttons

								    #define BUTTON1_PIN         13

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // Relays

								    #define RELAY1_PIN          15

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// EX-Store Wifi Relay v3.1

								// https://ex-store.de/ESP8266-WiFi-Relay-V31

								// -----------------------------------------------------------------------------


								#elif defined(EXS_WIFI_RELAY_V31)


								    // Untested


								    // Info

								    #define MANUFACTURER        "EXS"

								    #define DEVICE              "WIFI_RELAY_V31"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // Relays

								    #define RELAY1_PIN          13

								    #define RELAY1_TYPE         RELAY_TYPE_LATCHED

								    #define RELAY1_RESET_PIN    12


								// -----------------------------------------------------------------------------

								// V9261F

								// -----------------------------------------------------------------------------


								#elif defined(GENERIC_V9261F)


								    // Info

								    #define MANUFACTURER        "GENERIC"

								    #define DEVICE              "V9261F"


								    // V9261F

								    #define POWER_PROVIDER      POWER_PROVIDER_V9261F

								    #define V9261F_PIN          2

								    #define V9261F_PIN_INVERSE  1


								// -----------------------------------------------------------------------------

								// ECH1560

								// -----------------------------------------------------------------------------


								#elif defined(GENERIC_ECH1560)


								    // Info

								    #define MANUFACTURER        "GENERIC"

								    #define DEVICE              "ECH1560"


								    // ECH1560

								    #define POWER_PROVIDER      POWER_PROVIDER_ECH1560

								    #define ECH1560_CLK_PIN     4

								    #define ECH1560_MISO_PIN    5

								    #define ECH1560_INVERTED    0


								// -----------------------------------------------------------------------------

								// ESPLive

								// https://github.com/ManCaveMade/ESP-Live

								// -----------------------------------------------------------------------------


								#elif defined(MANCAVEMADE_ESPLIVE)


								    // Info

								    #define MANUFACTURER        "MANCAVEMADE"

								    #define DEVICE              "ESPLIVE"


								    // Buttons

								    #define BUTTON1_PIN         4

								    #define BUTTON2_PIN         5


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          13


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL


								    // DB18B20

								    #define DS18B20_SUPPORT             1

								    #define DS18B20_PIN                 2

								    #define DS18B20_UPDATE_INTERVAL     5000

								    #define DS18B20_UPDATE_ON_CHANGE    1.0


								// -----------------------------------------------------------------------------

								// QuinLED

								// http://blog.quindorian.org/2017/02/esp8266-led-lighting-quinled-v2-6-pcb.html

								// -----------------------------------------------------------------------------


								#elif defined(INTERMITTECH_QUINLED)


								    // Info

								    #define MANUFACTURER        "INTERMITTECH"

								    #define DEVICE              "QUINLED"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // LEDs

								    #define LED1_PIN            5

								    #define LED1_PIN_INVERSE    1


								    // Channels

								    #define LIGHT_CH1_PIN       0

								    #define LIGHT_CH2_PIN       2


								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0


								// -----------------------------------------------------------------------------

								// Arilux AL-LC06

								// -----------------------------------------------------------------------------


								#elif defined(ARILUX_AL_LC06)


								    // Info

								    #define MANUFACTURER        "ARILUX"

								    #define DEVICE              "AL-LC06"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // Channels

								    #define LIGHT_CH1_PIN       12      // RED

								    #define LIGHT_CH2_PIN       14      // GREEN

								    #define LIGHT_CH3_PIN       13      // BLUE

								    #define LIGHT_CH4_PIN       15      // WHITE1

								    #define LIGHT_CH5_PIN       5       // WHITE2


								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0

								    #define LIGHT_CH5_INVERSE   0


								// -----------------------------------------------------------------------------

								// XENON SM-PW701U

								// -----------------------------------------------------------------------------


								#elif defined(XENON_SM_PW702U)


								    // Info

								    #define MANUFACTURER        "XENON"

								    #define DEVICE              "SM_PW702U"


								    // Buttons

								    #define BUTTON1_PIN         13

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            4

								    #define LED1_PIN_INVERSE    1


								// -----------------------------------------------------------------------------

								// AUTHOMETION LYT8266

								// https://authometion.com/shop/en/home/13-lyt8266.html

								// -----------------------------------------------------------------------------


								#elif defined(AUTHOMETION_LYT8266)


								    // Info

								    #define MANUFACTURER        "AUTHOMETION"

								    #define DEVICE              "LYT8266"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // Channels

								    #define LIGHT_CH1_PIN       13      // RED

								    #define LIGHT_CH2_PIN       12      // GREEN

								    #define LIGHT_CH3_PIN       14      // BLUE

								    #define LIGHT_CH4_PIN       2       // WHITE


								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0


								    #define LIGHT_ENABLE_PIN    15


								// -----------------------------------------------------------------------------

								// Unknown hardware

								// -----------------------------------------------------------------------------


								#else

								    #error "UNSUPPORTED HARDWARE!"

								#endif


								// -----------------------------------------------------------------------------

								// Default values

								// -----------------------------------------------------------------------------


								#ifndef BUTTON1_PRESS

								#define BUTTON1_PRESS       BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON2_PRESS

								#define BUTTON2_PRESS       BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON3_PRESS

								#define BUTTON3_PRESS       BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON4_PRESS

								#define BUTTON4_PRESS       BUTTON_MODE_NONE

								#endif


								#ifndef BUTTON1_CLICK

								#define BUTTON1_CLICK       BUTTON_MODE_TOGGLE

								#endif

								#ifndef BUTTON2_CLICK

								#define BUTTON2_CLICK       BUTTON_MODE_TOGGLE

								#endif

								#ifndef BUTTON3_CLICK

								#define BUTTON3_CLICK       BUTTON_MODE_TOGGLE

								#endif

								#ifndef BUTTON4_CLICK

								#define BUTTON4_CLICK       BUTTON_MODE_TOGGLE

								#endif


								#ifndef BUTTON1_DBLCLICK

								#define BUTTON1_DBLCLICK    BUTTON_MODE_AP

								#endif

								#ifndef BUTTON2_DBLCLICK

								#define BUTTON2_DBLCLICK    BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON3_DBLCLICK

								#define BUTTON3_DBLCLICK    BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON4_DBLCLICK

								#define BUTTON4_DBLCLICK    BUTTON_MODE_NONE

								#endif


								#ifndef BUTTON1_LNGCLICK

								#define BUTTON1_LNGCLICK    BUTTON_MODE_RESET

								#endif

								#ifndef BUTTON2_LNGCLICK

								#define BUTTON2_LNGCLICK    BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON3_LNGCLICK

								#define BUTTON3_LNGCLICK    BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON4_LNGCLICK

								#define BUTTON4_LNGCLICK    BUTTON_MODE_NONE

								#endif


								#ifndef BUTTON1_LNGLNGCLICK

								#define BUTTON1_LNGLNGCLICK BUTTON_MODE_FACTORY

								#endif

								#ifndef BUTTON2_LNGLNGCLICK

								#define BUTTON2_LNGLNGCLICK BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON3_LNGLNGCLICK

								#define BUTTON3_LNGLNGCLICK BUTTON_MODE_NONE

								#endif

								#ifndef BUTTON4_LNGLNGCLICK

								#define BUTTON4_LNGLNGCLICK BUTTON_MODE_NONE

								#endif


								#ifndef BUTTON1_RELAY

								#define BUTTON1_RELAY       0

								#endif

								#ifndef BUTTON2_RELAY

								#define BUTTON2_RELAY       0

								#endif

								#ifndef BUTTON3_RELAY

								#define BUTTON3_RELAY       0

								#endif

								#ifndef BUTTON4_RELAY

								#define BUTTON4_RELAY       0

								#endif


								#ifndef RELAY1_RESET_PIN

								#define RELAY1_RESET_PIN      0

								#endif

								#ifndef RELAY2_RESET_PIN

								#define RELAY2_RESET_PIN      0

								#endif

								#ifndef RELAY3_RESET_PIN

								#define RELAY3_RESET_PIN      0

								#endif

								#ifndef RELAY4_RESET_PIN

								#define RELAY4_RESET_PIN      0

								#endif


								#ifndef RELAY1_DELAY_ON

								#define RELAY1_DELAY_ON       0

								#endif

								#ifndef RELAY2_DELAY_ON

								#define RELAY2_DELAY_ON       0

								#endif

								#ifndef RELAY3_DELAY_ON

								#define RELAY3_DELAY_ON       0

								#endif

								#ifndef RELAY4_DELAY_ON

								#define RELAY4_DELAY_ON       0

								#endif


								#ifndef RELAY1_DELAY_OFF

								#define RELAY1_DELAY_OFF      0

								#endif

								#ifndef RELAY2_DELAY_OFF

								#define RELAY2_DELAY_OFF      0

								#endif

								#ifndef RELAY3_DELAY_OFF

								#define RELAY3_DELAY_OFF      0

								#endif

								#ifndef RELAY4_DELAY_OFF

								#define RELAY4_DELAY_OFF      0

								#endif


								#ifndef RELAY1_LED

								#define RELAY1_LED          0

								#endif

								#ifndef RELAY2_LED

								#define RELAY2_LED          0

								#endif

								#ifndef RELAY3_LED

								#define RELAY3_LED          0

								#endif

								#ifndef RELAY4_LED

								#define RELAY4_LED          0

								#endif


								// Needed for ESP8285 boards under Windows using PlatformIO (?)

								#ifndef BUTTON_PUSHBUTTON

								#define BUTTON_PUSHBUTTON   0

								#define BUTTON_SWITCH       1

								#define BUTTON_DEFAULT_HIGH 2

								#define BUTTON_SET_PULLUP   4

								#endif


								// Does the board track the relay status?

								#ifndef TRACK_RELAY_STATUS

								#define TRACK_RELAY_STATUS  1

								#endif


								// Serial baudrate

								#ifndef SERIAL_BAUDRATE

								#define SERIAL_BAUDRATE         115200

								#endif


								// Relay providers

								#ifndef RELAY_PROVIDER

								#define RELAY_PROVIDER          RELAY_PROVIDER_RELAY

								#endif


								// Light provider

								#ifndef LIGHT_PROVIDER

								#define LIGHT_PROVIDER          LIGHT_PROVIDER_NONE

								#endif