Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

168 lines
5.2 KiB

/*
POWER HLW8012 MODULE
Copyright (C) 2016-2017 by Xose Pérez <xose dot perez at gmail dot com>
*/
#if POWER_PROVIDER == POWER_PROVIDER_HLW8012
// -----------------------------------------------------------------------------
// MODULE GLOBALS AND CACHE
// -----------------------------------------------------------------------------
#include <HLW8012.h>
#include <ESP8266WiFi.h>
HLW8012 _hlw8012;
WiFiEventHandler _power_wifi_onconnect;
WiFiEventHandler _power_wifi_ondisconnect;
// -----------------------------------------------------------------------------
// HAL
// -----------------------------------------------------------------------------
void ICACHE_RAM_ATTR _hlw_cf1_isr() {
_hlw8012.cf1_interrupt();
}
void ICACHE_RAM_ATTR _hlw_cf_isr() {
_hlw8012.cf_interrupt();
}
void _hlwRestoreCalibration() {
double value;
value = getSetting("pwrRatioP", 0).toFloat();
if (value > 0) _hlw8012.setPowerMultiplier(value);
value = getSetting("pwrRatioC", 0).toFloat();
if (value > 0) _hlw8012.setCurrentMultiplier(value);
value = getSetting("pwrRatioV", 0).toFloat();
if (value > 0) _hlw8012.setVoltageMultiplier(value);
}
void _hlwPersistCalibration() {
setSetting("pwrRatioP", _hlw8012.getPowerMultiplier());
setSetting("pwrRatioC", _hlw8012.getCurrentMultiplier());
setSetting("pwrRatioV", _hlw8012.getVoltageMultiplier());
saveSettings();
}
// -----------------------------------------------------------------------------
// POWER API
// -----------------------------------------------------------------------------
double _powerCurrent() {
return _hlw8012.getCurrent();
}
double _powerVoltage() {
return _hlw8012.getVoltage();
}
double _powerActivePower() {
return _hlw8012.getActivePower();
}
double _powerApparentPower() {
return _hlw8012.getApparentPower();
}
double _powerReactivePower() {
return _hlw8012.getReactivePower();
}
double _powerPowerFactor() {
return _hlw8012.getPowerFactor();
}
double _powerEnergy() {
return _hlw8012.getEnergy();
}
void _powerEnabledProvider() {
if (_power_enabled) {
attachInterrupt(HLW8012_CF1_PIN, _hlw_cf1_isr, CHANGE);
attachInterrupt(HLW8012_CF_PIN, _hlw_cf_isr, CHANGE);
} else {
detachInterrupt(HLW8012_CF1_PIN);
detachInterrupt(HLW8012_CF_PIN);
}
}
void _powerCalibrateProvider(unsigned char magnitude, double value) {
if (value <= 0) return;
if (magnitude == POWER_MAGNITUDE_ACTIVE) _hlw8012.expectedActivePower(value);
if (magnitude == POWER_MAGNITUDE_CURRENT) _hlw8012.expectedCurrent(value);
if (magnitude == POWER_MAGNITUDE_VOLTAGE) _hlw8012.expectedVoltage(value);
_hlwPersistCalibration();
}
void _powerResetCalibrationProvider() {
_hlw8012.resetMultipliers();
delSetting("pwrRatioC");
delSetting("pwrRatioV");
delSetting("pwrRatioP");
saveSettings();
}
void _powerConfigureProvider() {
// Nothing to do
}
void _powerSetupProvider() {
// Initialize HLW8012
// void begin(unsigned char cf_pin, unsigned char cf1_pin, unsigned char sel_pin, unsigned char currentWhen = HIGH, bool use_interrupts = false, unsigned long pulse_timeout = PULSE_TIMEOUT);
// * cf_pin, cf1_pin and sel_pin are GPIOs to the HLW8012 IC
// * currentWhen is the value in sel_pin to select current sampling
// * set use_interrupts to true to use interrupts to monitor pulse widths
// * leave pulse_timeout to the default value, recommended when using interrupts
#if HLW8012_USE_INTERRUPTS
_hlw8012.begin(HLW8012_CF_PIN, HLW8012_CF1_PIN, HLW8012_SEL_PIN, HLW8012_SEL_CURRENT, true);
#else
_hlw8012.begin(HLW8012_CF_PIN, HLW8012_CF1_PIN, HLW8012_SEL_PIN, HLW8012_SEL_CURRENT, false, 1000000);
#endif
// These values are used to calculate current, voltage and power factors as per datasheet formula
// These are the nominal values for the Sonoff POW resistors:
// * The CURRENT_RESISTOR is the 1milliOhm copper-manganese resistor in series with the main line
// * The VOLTAGE_RESISTOR_UPSTREAM are the 5 470kOhm resistors in the voltage divider that feeds the V2P pin in the HLW8012
// * The VOLTAGE_RESISTOR_DOWNSTREAM is the 1kOhm resistor in the voltage divider that feeds the V2P pin in the HLW8012
_hlw8012.setResistors(HLW8012_CURRENT_R, HLW8012_VOLTAGE_R_UP, HLW8012_VOLTAGE_R_DOWN);
_hlwRestoreCalibration();
#if HLW8012_USE_INTERRUPTS
powerEnabled(true); //Always keep measurement active to keep track of energy used
#else
_power_wifi_onconnect = WiFi.onStationModeGotIP([](WiFiEventStationModeGotIP ipInfo) {
powerEnabled(true);
});
_power_wifi_ondisconnect = WiFi.onStationModeDisconnected([](WiFiEventStationModeDisconnected ipInfo) {
powerEnabled(false);
});
#endif
}
void _powerLoopProvider(bool before) {
if (before) {
static unsigned long last = 0;
if (millis() - last > POWER_READ_INTERVAL) {
last = millis();
_power_newdata = true;
// Toggle between current and voltage monitoring
#if (HLW8012_USE_INTERRUPTS == 0)
_hlw8012.toggleMode();
#endif // (HLW8012_USE_INTERRUPTS == 0)
}
}
}
#endif // POWER_PROVIDER == POWER_PROVIDER_HLW8012