Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

156 lines
4.3 KiB

/*
ENCODER MODULE
Copyright (C) 2018 by Xose Pérez <xose dot perez at gmail dot com>
*/
#if ENCODER_SUPPORT && (LIGHT_PROVIDER != LIGHT_PROVIDER_NONE)
#include <Encoder.h>
#include <vector>
typedef struct {
Encoder * encoder;
unsigned char button_pin;
unsigned char button_logic;
unsigned char button_mode;
unsigned char mode;
unsigned char channel1; // default
unsigned char channel2; // only if button defined and pressed
} encoder_t;
std::vector<encoder_t> _encoders;
void _encoderConfigure() {
// Clean previous encoders
for (unsigned char i=0; i<_encoders.size(); i++) {
free(_encoders[i].encoder);
}
_encoders.clear();
// Load encoders
#if (ENCODER1_PIN1 != GPIO_NONE) && (ENCODER1_PIN2 != GPIO_NONE)
{
_encoders.push_back({
new Encoder(ENCODER1_PIN1, ENCODER1_PIN2),
ENCODER1_BUTTON_PIN, ENCODER1_BUTTON_LOGIC, ENCODER1_BUTTON_MODE, ENCODER1_MODE,
ENCODER1_CHANNEL1, ENCODER1_CHANNEL2
});
}
#endif
#if (ENCODER2_PIN1 != GPIO_NONE) && (ENCODER2_PIN2 != GPIO_NONE)
{
_encoders.push_back({
new Encoder(ENCODER2_PIN1, ENCODER2_PIN2),
ENCODER2_BUTTON_PIN, ENCODER2_BUTTON_LOGIC, ENCODER2_BUTTON_MODE, ENCODER2_MODE,
ENCODER2_CHANNEL1, ENCODER2_CHANNEL2
});
}
#endif
#if (ENCODER3_PIN1 != GPIO_NONE) && (ENCODER3_PIN2 != GPIO_NONE)
{
_encoders.push_back({
new Encoder(ENCODER3_PIN1, ENCODER3_PIN2),
ENCODER3_BUTTON_PIN, ENCODER3_BUTTON_LOGIC, ENCODER3_BUTTON_MODE, ENCODER3_MODE,
ENCODER3_CHANNEL1, ENCODER3_CHANNEL2
});
}
#endif
#if (ENCODER4_PIN1 != GPIO_NONE) && (ENCODER4_PIN2 != GPIO_NONE)
{
_encoders.push_back({
new Encoder(ENCODER4_PIN1, ENCODER4_PIN2),
ENCODER4_BUTTON_PIN, ENCODER4_BUTTON_LOGIC, ENCODER4_BUTTON_MODE, ENCODER4_MODE,
ENCODER4_CHANNEL1, ENCODER4_CHANNEL2
});
}
#endif
#if (ENCODER5_PIN1 != GPIO_NONE) && (ENCODER5_PIN2 != GPIO_NONE)
{
_encoders.push_back({
new Encoder(ENCODER5_PIN1, ENCODER5_PIN2),
ENCODER5_BUTTON_PIN, ENCODER5_BUTTON_LOGIC, ENCODER5_BUTTON_MODE, ENCODER5_MODE,
ENCODER5_CHANNEL1, ENCODER5_CHANNEL2
});
}
#endif
// Setup encoders
for (unsigned char i=0; i<_encoders.size(); i++) {
if (GPIO_NONE != _encoders[i].button_pin) {
pinMode(_encoders[i].button_pin, _encoders[i].button_mode);
}
}
}
void _encoderLoop() {
// for each encoder
for (unsigned char i=0; i<_encoders.size(); i++) {
// get encoder
encoder_t encoder = _encoders[i];
// read encoder
long delta = encoder.encoder->read();
encoder.encoder->write(0);
if (0 == delta) continue;
DEBUG_MSG_P(PSTR("[ENCODER] Delta: %d\n"), delta);
// action
if (encoder.button_pin == GPIO_NONE) {
// if there is no button, the encoder driver the CHANNEL1
lightChannelStep(encoder.channel1, delta);
} else {
// check if button is pressed
bool pressed = (digitalRead(encoder.button_pin) != encoder.button_logic);
if (ENCODER_MODE_CHANNEL == encoder.mode) {
// the button controls what channel we are changing
lightChannelStep(pressed ? encoder.channel2 : encoder.channel1, delta);
} if (ENCODER_MODE_RATIO == encoder.mode) {
// the button controls if we are changing the channel ratio or the overall brightness
if (pressed) {
lightChannelStep(encoder.channel1, delta);
lightChannelStep(encoder.channel2, -delta);
} else {
lightBrightnessStep(delta);
}
}
}
lightUpdate(true, true);
}
}
// -----------------------------------------------------------------------------
void encoderSetup() {
// Configure encoders
_encoderConfigure();
// Main callbacks
espurnaRegisterLoop(_encoderLoop);
espurnaRegisterReload(_encoderConfigure);
DEBUG_MSG_P(PSTR("[ENCODER] Number of encoders: %u\n"), _encoders.size());
}
#endif // ENCODER_SUPPORT && (LIGHT_PROVIDER != LIGHT_PROVIDER_NONE)