mh
/
mhsw-espurna


								// -----------------------------------------------------------------------------

								// Configuration HELP

								// -----------------------------------------------------------------------------

								//

								// MANUFACTURER: Name of the manufacturer of the board ("string")

								// DEVICE: Name of the device ("string")

								// BUTTON#_PIN: GPIO for the n-th button (1-based, up to 4 buttons)

								// BUTTON#_RELAY: Relay number that will be bind to the n-th button (1-based)

								// BUTTON#_MODE: A mask of options (BUTTON_PUSHBUTTON and BUTTON_SWITCH cannot be together)

								//   - BUTTON_PUSHBUTTON: button event is fired when released

								//   - BUTTON_SWITCH: button event is fired when pressed or released

								//   - BUTTON_DEFAULT_HIGH: there is a pull up in place

								//   - BUTTON_SET_PULLUP: set pullup by software

								// RELAY#_PIN: GPIO for the n-th relay (1-based, up to 4 relays)

								// RELAY#_TYPE: Relay can be RELAY_TYPE_NORMAL, RELAY_TYPE_INVERSE, RELAY_TYPE_LATCHED or RELAY_TYPE_LATCHED_INVERSE

								// LED#_PIN: GPIO for the n-th LED (1-based, up to 4 LEDs)

								// LED#_PIN_INVERSE: LED has inversed logic (lit when pulled down)

								// LED#_MODE: Check hardware.h for LED_MODE_%

								// LED#_RELAY: Linked relay (1-based)

								//

								// Besides, other hardware specific information should be stated here


								// -----------------------------------------------------------------------------

								// ESPurna Core

								// -----------------------------------------------------------------------------


								#if defined(ESPURNA_CORE)


								    // This is a special device targeted to generate a light-weight binary image

								    // meant to be able to do two-step-updates:

								    // https://github.com/xoseperez/espurna/wiki/TwoStepUpdates


								    // Info

								    #define MANUFACTURER            "ESPRESSIF"

								    #define DEVICE                  "ESPURNA_CORE"


								    // Disable non-core modules

								    #define ALEXA_SUPPORT           0

								    #define BROKER_SUPPORT          0

								    #define DOMOTICZ_SUPPORT        0

								    #define HOMEASSISTANT_SUPPORT   0

								    #define I2C_SUPPORT             0

								    #define MQTT_SUPPORT            0

								    #define NTP_SUPPORT             0

								    #define SCHEDULER_SUPPORT       0

								    #define SENSOR_SUPPORT          0

								    #define THINGSPEAK_SUPPORT      0

								    #define WEB_SUPPORT             0


								// -----------------------------------------------------------------------------

								// Development boards

								// -----------------------------------------------------------------------------


								#elif defined(NODEMCU_LOLIN)


								    // Info

								    #define MANUFACTURER        "NODEMCU"

								    #define DEVICE              "LOLIN"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								#elif defined(WEMOS_D1_MINI_RELAYSHIELD)


								    // Info

								    #define MANUFACTURER        "WEMOS"

								    #define DEVICE              "D1_MINI_RELAYSHIELD"


								    // Buttons

								    // No buttons on the D1 MINI alone, but defining it without adding a button doen't create problems

								    #define BUTTON1_PIN         0   // Connect a pushbutton between D3 and GND,

								                                    // it's the same as using a Wemos one button shield

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          5

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								    // When Wemos relay shield is connected GPIO5 (D1) is used for relay,

								    // so I2C must be remapped to other pins

								    #define I2C_SDA_PIN         12  // D6

								    #define I2C_SCL_PIN         14  // D5


								#elif defined(WEMOS_D1_TARPUNA_SHIELD)


								    // Info

								    #define MANUFACTURER        "WEMOS"

								    #define DEVICE              "D1_TARPUNA_SHIELD"


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								// -----------------------------------------------------------------------------

								// ESPurna

								// -----------------------------------------------------------------------------


								#elif defined(TINKERMAN_ESPURNA_H06)


								    // Info

								    #define MANUFACTURER        "TINKERMAN"

								    #define DEVICE              "ESPURNA_H06"


								    // Buttons

								    #define BUTTON1_PIN         4

								    #define BUTTON1_RELAY       1


								    // Normal pushbutton

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_INVERSE


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								    // HLW8012

								    #ifndef HLW8012_SUPPORT

								    #define HLW8012_SUPPORT     1

								    #endif

								    #define HLW8012_SEL_PIN     2

								    #define HLW8012_CF1_PIN     13

								    #define HLW8012_CF_PIN      14


								#elif defined(TINKERMAN_ESPURNA_H08)


								    // Info

								    #define MANUFACTURER        "TINKERMAN"

								    #define DEVICE              "ESPURNA_H08"


								    // Buttons

								    #define BUTTON1_PIN         4

								    #define BUTTON1_RELAY       1


								    // Normal pushbutton

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    0


								    // HLW8012

								    #ifndef HLW8012_SUPPORT

								    #define HLW8012_SUPPORT     1

								    #endif

								    #define HLW8012_SEL_PIN     5

								    #define HLW8012_CF1_PIN     13

								    #define HLW8012_CF_PIN      14


								#elif defined(TINKERMAN_ESPURNA_SWITCH)


								    // Info

								    #define MANUFACTURER        "TINKERMAN"

								    #define DEVICE              "ESPURNA_SWITCH"


								    // Buttons

								    #define BUTTON1_PIN         4

								    #define BUTTON1_RELAY       1


								    // Touch button

								    #define BUTTON1_MODE            BUTTON_PUSHBUTTON

								    #define BUTTON1_PRESS           BUTTON_MODE_TOGGLE

								    #define BUTTON1_CLICK           BUTTON_MODE_NONE

								    #define BUTTON1_DBLCLICK        BUTTON_MODE_NONE

								    #define BUTTON1_LNGCLICK        BUTTON_MODE_NONE

								    #define BUTTON1_LNGLNGCLICK     BUTTON_MODE_NONE


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    0


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_INVERSE


								// -----------------------------------------------------------------------------

								// Itead Studio boards

								// -----------------------------------------------------------------------------


								#elif defined(ITEAD_SONOFF_BASIC)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_BASIC"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1

								    #define BUTTON2_PIN         14

								    #define BUTTON2_MODE        BUTTON_SWITCH | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_RF)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_RF"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1

								    #define BUTTON2_PIN         14

								    #define BUTTON2_MODE        BUTTON_SWITCH | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_TH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_TH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								    // Jack is connected to GPIO14 (and with a small hack to GPIO4)

								    #ifndef DALLAS_SUPPORT

								    #define DALLAS_SUPPORT      1

								    #endif

								    #define DALLAS_PIN          14


								    #ifndef DHT_SUPPORT

								    #define DHT_SUPPORT         1

								    #endif

								    #define DHT_PIN             14


								    //#define I2C_SDA_PIN         4

								    //#define I2C_SCL_PIN         14


								#elif defined(ITEAD_SONOFF_SV)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_SV"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SLAMPHER)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SLAMPHER"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_S20)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "S20"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_TOUCH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_TOUCH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON1_CLICK       BUTTON_MODE_NONE

								    #define BUTTON1_DBLCLICK    BUTTON_MODE_NONE

								    #define BUTTON1_LNGCLICK    BUTTON_MODE_NONE

								    #define BUTTON1_LNGLNGCLICK BUTTON_MODE_RESET

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_POW)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_POW"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            15

								    #define LED1_PIN_INVERSE    0


								    // HLW8012

								    #ifndef HLW8012_SUPPORT

								    #define HLW8012_SUPPORT     1

								    #endif

								    #define HLW8012_SEL_PIN     5

								    #define HLW8012_CF1_PIN     13

								    #define HLW8012_CF_PIN      14


								#elif defined(ITEAD_SONOFF_DUAL)


								    // Info

								    #define MANUFACTURER            "ITEAD"

								    #define DEVICE                  "SONOFF_DUAL"

								    #define SERIAL_BAUDRATE         19230

								    #define RELAY_PROVIDER          RELAY_PROVIDER_DUAL

								    #define DUMMY_RELAY_COUNT       2

								    #define DEBUG_SERIAL_SUPPORT    0

								    #define TERMINAL_SUPPORT        0


								    // Buttons

								    #define BUTTON3_RELAY       1


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_DUAL_R2)


								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_DUAL_R2"


								    // Buttons

								    #define BUTTON1_PIN         0       // Button 0 on header

								    #define BUTTON2_PIN         9       // Button 1 on header

								    #define BUTTON3_PIN         10      // Physical button

								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2

								    #define BUTTON3_RELAY       1

								    #define BUTTON1_MODE        BUTTON_SWITCH | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_SWITCH | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH

								    #define BUTTON3_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          5

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_4CH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_4CH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON2_PIN         9

								    #define BUTTON3_PIN         10

								    #define BUTTON4_PIN         14


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON3_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON4_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2

								    #define BUTTON3_RELAY       3

								    #define BUTTON4_RELAY       4


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          5

								    #define RELAY3_PIN          4

								    #define RELAY4_PIN          15


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY3_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY4_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_4CH_PRO)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_4CH_PRO"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON2_PIN         9

								    #define BUTTON3_PIN         10

								    #define BUTTON4_PIN         14


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON3_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON4_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2

								    #define BUTTON3_RELAY       3

								    #define BUTTON4_RELAY       4


								    // Sonoff 4CH Pro uses a secondary STM32 microcontroller to handle

								    // buttons and relays, but it also forwards button presses to the ESP8285.

								    // This allows ESPurna to handle button presses -almost- the same way

								    // as with other devices except:

								    // * Double click seems to break/disable the button on the STM32 side

								    // * With S6 switch to 1 (self-locking and inching modes) everything's OK

								    // * With S6 switch to 0 (interlock mode) if there is a relay ON

								    //    and you click on another relay button, the STM32 sends a "press"

								    //    event for the button of the first relay (to turn it OFF) but it

								    //    does not send a "release" event. It's like it's holding the

								    //    button down since you can see it is still LOW.

								    //    Whatever reason the result is that it may actually perform a

								    //    long click or long-long click.

								    // The configuration below make the button toggle the relay on press events

								    // and disables any possibly harmful combination with S6 set to 0.

								    // If you are sure you will only use S6 to 1 you can comment the

								    // BUTTON1_LNGCLICK and BUTTON1_LNGLNGCLICK options below to recover the

								    // reset mode and factory reset functionalities, or link other actions like

								    // AP mode in the commented line below.


								    #define BUTTON1_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON1_CLICK       BUTTON_MODE_NONE

								    #define BUTTON1_DBLCLICK    BUTTON_MODE_NONE

								    #define BUTTON1_LNGCLICK    BUTTON_MODE_NONE

								    //#define BUTTON1_LNGCLICK    BUTTON_MODE_AP

								    #define BUTTON1_LNGLNGCLICK BUTTON_MODE_NONE

								    #define BUTTON2_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON2_CLICK       BUTTON_MODE_NONE

								    #define BUTTON3_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON3_CLICK       BUTTON_MODE_NONE

								    #define BUTTON4_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON4_CLICK       BUTTON_MODE_NONE


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          5

								    #define RELAY3_PIN          4

								    #define RELAY4_PIN          15


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY3_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY4_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_1CH_INCHING)


								    // The inching functionality is managed by a misterious IC in the board.

								    // You cannot control the inching button and functionality from the ESP8266

								    // Besides, enabling the inching functionality using the hardware button

								    // will result in the relay switching on and off continuously.

								    // Fortunately the unkown IC keeps memory of the hardware inching status

								    // so you can just disable it and forget. The inching LED must be lit.

								    // You can still use the pulse options from the web interface

								    // without problem.


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "1CH_INCHING"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_MOTOR)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "MOTOR"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_BNSZ01)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "BNSZ01"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								    // Light

								    #define LIGHT_CHANNELS      1

								    #define LIGHT_CH1_PIN       12

								    #define LIGHT_CH1_INVERSE   0


								#elif defined(ITEAD_SONOFF_RFBRIDGE)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_RFBRIDGE"

								    #define SERIAL_BAUDRATE     19200

								    #define RELAY_PROVIDER      RELAY_PROVIDER_RFBRIDGE


								    #ifndef DUMMY_RELAY_COUNT

								    #define DUMMY_RELAY_COUNT   8

								    #endif


								    // Remove UART noise on serial line

								    #define TERMINAL_SUPPORT        0

								    #define DEBUG_SERIAL_SUPPORT    0


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_B1)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_B1"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_MY92XX

								    #define DUMMY_RELAY_COUNT   1


								    // Light

								    #define LIGHT_CHANNELS      5

								    #define MY92XX_MODEL        MY92XX_MODEL_MY9231

								    #define MY92XX_CHIPS        2

								    #define MY92XX_DI_PIN       12

								    #define MY92XX_DCKI_PIN     14

								    #define MY92XX_COMMAND      MY92XX_COMMAND_DEFAULT

								    #define MY92XX_MAPPING      4, 3, 5, 0, 1


								#elif defined(ITEAD_SONOFF_LED)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_LED"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								    // Light

								    #define LIGHT_CHANNELS      2

								    #define LIGHT_CH1_PIN       12  // Cold white

								    #define LIGHT_CH2_PIN       14  // Warm white

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0


								#elif defined(ITEAD_SONOFF_T1_1CH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_T1_1CH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON1_CLICK       BUTTON_MODE_NONE

								    #define BUTTON1_DBLCLICK    BUTTON_MODE_NONE

								    #define BUTTON1_LNGCLICK    BUTTON_MODE_NONE

								    #define BUTTON1_LNGLNGCLICK BUTTON_MODE_RESET

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_T1_2CH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_T1_2CH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON2_PIN         9


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON1_CLICK       BUTTON_MODE_NONE

								    #define BUTTON1_DBLCLICK    BUTTON_MODE_NONE

								    #define BUTTON1_LNGCLICK    BUTTON_MODE_NONE

								    #define BUTTON1_LNGLNGCLICK BUTTON_MODE_RESET


								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON2_CLICK       BUTTON_MODE_NONE

								    #define BUTTON2_DBLCLICK    BUTTON_MODE_NONE

								    #define BUTTON2_LNGCLICK    BUTTON_MODE_NONE

								    #define BUTTON2_LNGLNGCLICK BUTTON_MODE_RESET


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          5


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								#elif defined(ITEAD_SONOFF_T1_3CH)


								    // Info

								    #define MANUFACTURER        "ITEAD"

								    #define DEVICE              "SONOFF_T1_3CH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON2_PIN         9

								    #define BUTTON3_PIN         10


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON1_CLICK       BUTTON_MODE_NONE

								    #define BUTTON1_DBLCLICK    BUTTON_MODE_NONE

								    #define BUTTON1_LNGCLICK    BUTTON_MODE_NONE

								    #define BUTTON1_LNGLNGCLICK BUTTON_MODE_RESET


								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON2_CLICK       BUTTON_MODE_NONE

								    #define BUTTON2_DBLCLICK    BUTTON_MODE_NONE

								    #define BUTTON2_LNGCLICK    BUTTON_MODE_NONE

								    #define BUTTON2_LNGLNGCLICK BUTTON_MODE_RESET


								    #define BUTTON3_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON3_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON3_CLICK       BUTTON_MODE_NONE

								    #define BUTTON3_DBLCLICK    BUTTON_MODE_NONE

								    #define BUTTON3_LNGCLICK    BUTTON_MODE_NONE

								    #define BUTTON3_LNGLNGCLICK BUTTON_MODE_RESET


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2

								    #define BUTTON3_RELAY       3


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          5

								    #define RELAY3_PIN          4


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY3_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    1


								// -----------------------------------------------------------------------------

								// YJZK

								// -----------------------------------------------------------------------------


								#elif defined(YJZK_SWITCH_2CH)


								    // Info

								    #define MANUFACTURER        "YJZK"

								    #define DEVICE              "SWITCH_2CH"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON2_PIN         9


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          5


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// Electrodragon boards

								// -----------------------------------------------------------------------------


								#elif defined(ELECTRODRAGON_WIFI_IOT)


								    // Info

								    #define MANUFACTURER        "ELECTRODRAGON"

								    #define DEVICE              "WIFI_IOT"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON2_PIN         2


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          13


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            16

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// WorkChoice ecoPlug

								// -----------------------------------------------------------------------------


								#elif defined(WORKCHOICE_ECOPLUG)


								    // Info

								    #define MANUFACTURER        "WORKCHOICE"

								    #define DEVICE              "ECOPLUG"


								    // Buttons

								    #define BUTTON1_PIN         13

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          15

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// AI Thinker

								// -----------------------------------------------------------------------------


								#elif defined(AITHINKER_AI_LIGHT)


								    // Info

								    #define MANUFACTURER        "AITHINKER"

								    #define DEVICE              "AI_LIGHT"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_MY92XX

								    #define DUMMY_RELAY_COUNT   1


								    // Light

								    #define LIGHT_CHANNELS      4

								    #define MY92XX_MODEL        MY92XX_MODEL_MY9291

								    #define MY92XX_CHIPS        1

								    #define MY92XX_DI_PIN       13

								    #define MY92XX_DCKI_PIN     15

								    #define MY92XX_COMMAND      MY92XX_COMMAND_DEFAULT

								    #define MY92XX_MAPPING      0, 1, 2, 3


								// -----------------------------------------------------------------------------

								// LED Controller

								// -----------------------------------------------------------------------------


								#elif defined(MAGICHOME_LED_CONTROLLER)


								    // Info

								    #define MANUFACTURER        "MAGICHOME"

								    #define DEVICE              "LED_CONTROLLER"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								    // Light

								    #define LIGHT_CHANNELS      4

								    #define LIGHT_CH1_PIN       14      // RED

								    #define LIGHT_CH2_PIN       5       // GREEN

								    #define LIGHT_CH3_PIN       12      // BLUE

								    #define LIGHT_CH4_PIN       13      // WHITE

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0


								    // IR

								    #define IR_SUPPORT          1

								    #define IR_PIN              4

								    #define IR_BUTTON_SET       1


								#elif defined(MAGICHOME_LED_CONTROLLER_20)


								    // Info

								    #define MANUFACTURER        "MAGICHOME"

								    #define DEVICE              "LED_CONTROLLER_20"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								    // Light

								    #define LIGHT_CHANNELS      4

								    #define LIGHT_CH1_PIN       5       // RED

								    #define LIGHT_CH2_PIN       12      // GREEN

								    #define LIGHT_CH3_PIN       13      // BLUE

								    #define LIGHT_CH4_PIN       15      // WHITE

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0


								    // IR

								    #define IR_SUPPORT          1

								    #define IR_PIN              4

								    #define IR_BUTTON_SET       1


								// -----------------------------------------------------------------------------

								// HUACANXING H801 & H802

								// -----------------------------------------------------------------------------


								#elif defined(HUACANXING_H801)


								    // Info

								    #define MANUFACTURER        "HUACANXING"

								    #define DEVICE              "H801"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1

								    #define DEBUG_PORT          Serial1

								    #define SERIAL_RX_ENABLED   1


								    // LEDs

								    #define LED1_PIN            5

								    #define LED1_PIN_INVERSE    1


								    // Light

								    #define LIGHT_CHANNELS      5

								    #define LIGHT_CH1_PIN       15      // RED

								    #define LIGHT_CH2_PIN       13      // GREEN

								    #define LIGHT_CH3_PIN       12      // BLUE

								    #define LIGHT_CH4_PIN       14      // WHITE1

								    #define LIGHT_CH5_PIN       4       // WHITE2

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0

								    #define LIGHT_CH5_INVERSE   0


								#elif defined(HUACANXING_H802)


								    // Info

								    #define MANUFACTURER        "HUACANXING"

								    #define DEVICE              "H802"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1

								    #define DEBUG_PORT          Serial1

								    #define SERIAL_RX_ENABLED   1


								    // Light

								    #define LIGHT_CHANNELS      4

								    #define LIGHT_CH1_PIN       12      // RED

								    #define LIGHT_CH2_PIN       14      // GREEN

								    #define LIGHT_CH3_PIN       13      // BLUE

								    #define LIGHT_CH4_PIN       15      // WHITE

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0


								// -----------------------------------------------------------------------------

								// Jan Goedeke Wifi Relay

								// https://github.com/JanGoe/esp8266-wifi-relay

								// -----------------------------------------------------------------------------


								#elif defined(JANGOE_WIFI_RELAY_NC)


								    // Info

								    #define MANUFACTURER        "JANGOE"

								    #define DEVICE              "WIFI_RELAY_NC"


								    // Buttons

								    #define BUTTON1_PIN         12

								    #define BUTTON2_PIN         13


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2


								    // Relays

								    #define RELAY1_PIN          2

								    #define RELAY2_PIN          14


								    #define RELAY1_TYPE         RELAY_TYPE_INVERSE

								    #define RELAY2_TYPE         RELAY_TYPE_INVERSE


								#elif defined(JANGOE_WIFI_RELAY_NO)


								    // Info

								    #define MANUFACTURER        "JANGOE"

								    #define DEVICE              "WIFI_RELAY_NO"


								    // Buttons

								    #define BUTTON1_PIN         12

								    #define BUTTON2_PIN         13


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2


								    // Relays

								    #define RELAY1_PIN          2

								    #define RELAY2_PIN          14


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL


								// -----------------------------------------------------------------------------

								// Jorge García Wifi+Relays Board Kit

								// https://www.tindie.com/products/jorgegarciadev/wifi--relays-board-kit

								// https://github.com/jorgegarciadev/wifikit

								// -----------------------------------------------------------------------------


								#elif defined(JORGEGARCIA_WIFI_RELAYS)


								    // Info

								    #define MANUFACTURER        "JORGEGARCIA"

								    #define DEVICE              "WIFI_RELAYS"


								    // Relays

								    #define RELAY1_PIN          0

								    #define RELAY2_PIN          2


								    #define RELAY1_TYPE         RELAY_TYPE_INVERSE

								    #define RELAY2_TYPE         RELAY_TYPE_INVERSE


								// -----------------------------------------------------------------------------

								// WiFi MQTT Relay / Thermostat

								// -----------------------------------------------------------------------------


								#elif defined(OPENENERGYMONITOR_MQTT_RELAY)


								    // Info

								    #define MANUFACTURER        "OPENENERGYMONITOR"

								    #define DEVICE              "MQTT_RELAY"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            16

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// WiOn 50055 Indoor Wi-Fi Wall Outlet & Tap

								// https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50050-Indoor-Wi-Fi-Outlet-Wireless-Switch-Programmable-Timer-%2F263112281551

								// https://rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338044841&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FWiOn-50055-Indoor-Wi-Fi-Wall-Tap-Monitor-Energy-Usage-Wireless-Smart-Switch-%2F263020837777

								// -----------------------------------------------------------------------------


								#elif defined(WION_50055)


								    // Currently untested, does not support energy monitoring


								    // Info

								    #define MANUFACTURER        "WION"

								    #define DEVICE              "50055"


								    // Buttons

								    #define BUTTON1_PIN         13

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // Relays

								    #define RELAY1_PIN          15

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// EX-Store Wifi Relay v3.1

								// https://ex-store.de/ESP8266-WiFi-Relay-V31

								// -----------------------------------------------------------------------------


								#elif defined(EXS_WIFI_RELAY_V31)


								    // Untested


								    // Info

								    #define MANUFACTURER        "EXS"

								    #define DEVICE              "WIFI_RELAY_V31"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_RELAY       1

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    // Relays

								    #define RELAY1_PIN          13

								    #define RELAY1_TYPE         RELAY_TYPE_LATCHED

								    #define RELAY1_RESET_PIN    12


								// -----------------------------------------------------------------------------

								// V9261F

								// -----------------------------------------------------------------------------


								#elif defined(GENERIC_V9261F)


								    // Info

								    #define MANUFACTURER        "GENERIC"

								    #define DEVICE              "V9261F"

								    #define ALEXA_SUPPORT       0


								    // V9261F

								    #define V9261F_SUPPORT      1

								    #define V9261F_PIN          2

								    #define V9261F_PIN_INVERSE  1


								// -----------------------------------------------------------------------------

								// ECH1560

								// -----------------------------------------------------------------------------


								#elif defined(GENERIC_ECH1560)


								    // Info

								    #define MANUFACTURER        "GENERIC"

								    #define DEVICE              "ECH1560"

								    #define ALEXA_SUPPORT       0


								    // ECH1560

								    #define ECH1560_SUPPORT     1

								    #define ECH1560_CLK_PIN     4

								    #define ECH1560_MISO_PIN    5

								    #define ECH1560_INVERTED    0


								// -----------------------------------------------------------------------------

								// ESPLive

								// https://github.com/ManCaveMade/ESP-Live

								// -----------------------------------------------------------------------------


								#elif defined(MANCAVEMADE_ESPLIVE)


								    // Info

								    #define MANUFACTURER        "MANCAVEMADE"

								    #define DEVICE              "ESPLIVE"


								    // Buttons

								    #define BUTTON1_PIN         4

								    #define BUTTON2_PIN         5


								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON2_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH


								    #define BUTTON1_RELAY       1

								    #define BUTTON2_RELAY       2


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY2_PIN          13


								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL


								    // DB18B20

								    #ifndef DALLAS_SUPPORT

								    #define DALLAS_SUPPORT             	1

								    #endif

								    #define DALLAS_PIN                 	2

								    #define DALLAS_UPDATE_INTERVAL     	5000

								    #define TEMPERATURE_MIN_CHANGE      1.0


								// -----------------------------------------------------------------------------

								// QuinLED

								// http://blog.quindorian.org/2017/02/esp8266-led-lighting-quinled-v2-6-pcb.html

								// -----------------------------------------------------------------------------


								#elif defined(INTERMITTECH_QUINLED)


								    // Info

								    #define MANUFACTURER        "INTERMITTECH"

								    #define DEVICE              "QUINLED"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // LEDs

								    #define LED1_PIN            5

								    #define LED1_PIN_INVERSE    1


								    // Light

								    #define LIGHT_CHANNELS      2

								    #define LIGHT_CH1_PIN       0

								    #define LIGHT_CH2_PIN       2

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0


								// -----------------------------------------------------------------------------

								// Arilux AL-LC06

								// -----------------------------------------------------------------------------


								#elif defined(ARILUX_AL_LC01)


								    // Info

								    #define MANUFACTURER        "ARILUX"

								    #define DEVICE              "AL_LC01"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // Light

								    #define LIGHT_CHANNELS      4

								    #define LIGHT_CH1_PIN       5       // RED

								    #define LIGHT_CH2_PIN       12      // GREEN

								    #define LIGHT_CH3_PIN       13      // BLUE

								    #define LIGHT_CH4_PIN       14      // WHITE1

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0


								#elif defined(ARILUX_AL_LC02)


								    // Info

								    #define MANUFACTURER        "ARILUX"

								    #define DEVICE              "AL_LC02"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // Light

								    #define LIGHT_CHANNELS      4

								    #define LIGHT_CH1_PIN       12      // RED

								    #define LIGHT_CH2_PIN       5       // GREEN

								    #define LIGHT_CH3_PIN       13      // BLUE

								    #define LIGHT_CH4_PIN       15      // WHITE1

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0


								#elif defined(ARILUX_AL_LC06)


								    // Info

								    #define MANUFACTURER        "ARILUX"

								    #define DEVICE              "AL_LC06"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // Light

								    #define LIGHT_CHANNELS      5

								    #define LIGHT_CH1_PIN       14      // RED

								    #define LIGHT_CH2_PIN       12      // GREEN

								    #define LIGHT_CH3_PIN       13      // BLUE

								    #define LIGHT_CH4_PIN       15      // WHITE1

								    #define LIGHT_CH5_PIN       5       // WHITE2

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0

								    #define LIGHT_CH5_INVERSE   0


								#elif defined(ARILUX_AL_LC11)


								    // Info

								    #define MANUFACTURER        "ARILUX"

								    #define DEVICE              "AL_LC11"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // Light

								    #define LIGHT_CHANNELS      5

								    #define LIGHT_CH1_PIN       5       // RED

								    #define LIGHT_CH2_PIN       4       // GREEN

								    #define LIGHT_CH3_PIN       14      // BLUE

								    #define LIGHT_CH4_PIN       13      // WHITE1

								    #define LIGHT_CH5_PIN       12      // WHITE1

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0

								    #define LIGHT_CH5_INVERSE   0


								#elif defined(ARILUX_E27)


								    // Info

								    #define MANUFACTURER        "ARILUX"

								    #define DEVICE              "E27"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_MY92XX

								    #define DUMMY_RELAY_COUNT   1


								    // Light

								    #define LIGHT_CHANNELS      4

								    #define MY92XX_MODEL        MY92XX_MODEL_MY9291

								    #define MY92XX_CHIPS        1

								    #define MY92XX_DI_PIN       13

								    #define MY92XX_DCKI_PIN     15

								    #define MY92XX_COMMAND      MY92XX_COMMAND_DEFAULT

								    #define MY92XX_MAPPING      0, 1, 2, 3


								// -----------------------------------------------------------------------------

								// XENON SM-PW701U

								// -----------------------------------------------------------------------------


								#elif defined(XENON_SM_PW702U)


								    // Info

								    #define MANUFACTURER        "XENON"

								    #define DEVICE              "SM_PW702U"


								    // Buttons

								    #define BUTTON1_PIN         13

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          12

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            4

								    #define LED1_PIN_INVERSE    1


								// -----------------------------------------------------------------------------

								// AUTHOMETION LYT8266

								// https://authometion.com/shop/en/home/13-lyt8266.html

								// -----------------------------------------------------------------------------


								#elif defined(AUTHOMETION_LYT8266)


								    // Info

								    #define MANUFACTURER        "AUTHOMETION"

								    #define DEVICE              "LYT8266"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // Light

								    #define LIGHT_CHANNELS      4

								    #define LIGHT_CH1_PIN       13      // RED

								    #define LIGHT_CH2_PIN       12      // GREEN

								    #define LIGHT_CH3_PIN       14      // BLUE

								    #define LIGHT_CH4_PIN       2       // WHITE

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0

								    #define LIGHT_CH4_INVERSE   0


								    #define LIGHT_ENABLE_PIN    15


								#elif defined(GIZWITS_WITTY_CLOUD)


								    // Info

								    #define MANUFACTURER        "GIZWITS"

								    #define DEVICE              "WITTY_CLOUD"

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1


								    // Buttons

								    #define BUTTON1_PIN         4

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_PRESS       BUTTON_MODE_TOGGLE

								    #define BUTTON1_CLICK       BUTTON_MODE_NONE

								    #define BUTTON1_DBLCLICK    BUTTON_MODE_NONE

								    #define BUTTON1_LNGCLICK    BUTTON_MODE_NONE

								    #define BUTTON1_LNGLNGCLICK BUTTON_MODE_RESET


								    #define ANALOG_SUPPORT      1


								    // LEDs

								    #define LED1_PIN            2      // BLUE build-in

								    #define LED1_PIN_INVERSE    1


								    // Light

								    #define LIGHT_CHANNELS      3

								    #define LIGHT_CH1_PIN       15       // RED

								    #define LIGHT_CH2_PIN       12       // GREEN

								    #define LIGHT_CH3_PIN       13      // BLUE

								    #define LIGHT_CH1_INVERSE   0

								    #define LIGHT_CH2_INVERSE   0

								    #define LIGHT_CH3_INVERSE   0


								// -----------------------------------------------------------------------------

								// KMC 70011

								// https://www.amazon.com/KMC-Monitoring-Required-Control-Compatible/dp/B07313TH7B

								// -----------------------------------------------------------------------------


								#elif defined(KMC_70011)


								    // Info

								    #define MANUFACTURER        "KMC"

								    #define DEVICE              "70011"


								    // Buttons

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Relays

								    #define RELAY1_PIN          14

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // LEDs

								    #define LED1_PIN            13

								    #define LED1_PIN_INVERSE    0


								    // HLW8012

								    #ifndef HLW8012_SUPPORT

								    #define HLW8012_SUPPORT     1

								    #endif

								    #define HLW8012_SEL_PIN     12

								    #define HLW8012_CF1_PIN     5

								    #define HLW8012_CF_PIN      4


								// -----------------------------------------------------------------------------

								// Euromate (?) Wifi Stecker Shuko

								// https://www.obi.de/hausfunksteuerung/wifi-stecker-schuko/p/2291706

								// Thanks to @Geitde

								// -----------------------------------------------------------------------------


								#elif defined(EUROMATE_WIFI_STECKER_SCHUKO)


								    // Info

								    #define MANUFACTURER        "EUROMATE"

								    #define DEVICE              "WIFI_STECKER_SCHUKO"


								    // Buttons

								    #define BUTTON1_PIN         14

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_SET_PULLUP | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // The relay in the device is not a bistable (latched) relay.

								    // The device is reported to have a flip-flop circuit to drive the relay

								    // So @Geitde hack is still the only possible


								    // Hack: drive GPIO12 low and use GPIO5 as normal relay pin:

								    #define RELAY1_PIN          5

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define LED2_PIN            12 /* DUMMY: exploit default off state for GPIO12=low */

								    #define LED2_PIN_INVERSE    0


								    // LEDs

								    #define LED1_PIN            4

								    #define LED1_PIN_INVERSE    0


								// -----------------------------------------------------------------------------

								// Generic 8CH

								// -----------------------------------------------------------------------------


								#elif defined(GENERIC_8CH)


								    // Info

								    #define MANUFACTURER        "GENERIC"

								    #define DEVICE              "8CH"


								    // Relays

								    #define RELAY1_PIN          0

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_PIN          2

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY3_PIN          4

								    #define RELAY3_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY4_PIN          5

								    #define RELAY4_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY5_PIN          12

								    #define RELAY5_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY6_PIN          13

								    #define RELAY6_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY7_PIN          14

								    #define RELAY7_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY8_PIN          15

								    #define RELAY8_TYPE         RELAY_TYPE_NORMAL


								#elif defined(STM_RELAY)


								    // Info

								    #define MANUFACTURER            "STM_RELAY"

								    #define DEVICE                  "2CH"


								    // Relays

								    #define DUMMY_RELAY_COUNT       2

								    #define RELAY_PROVIDER          RELAY_PROVIDER_STM


								    // Remove UART noise on serial line

								    #define TERMINAL_SUPPORT        0

								    #define DEBUG_SERIAL_SUPPORT    0


								// -----------------------------------------------------------------------------

								// TEST boards (do not use!!)

								// -----------------------------------------------------------------------------


								#elif defined(TRAVIS01)


								    // Info

								    #define MANUFACTURER            "TravisCI"

								    #define DEVICE                  "Virtual board 01"


								    // Some buttons - pin 0

								    #define BUTTON1_PIN         0

								    #define BUTTON1_MODE        BUTTON_PUSHBUTTON | BUTTON_DEFAULT_HIGH

								    #define BUTTON1_RELAY       1


								    // Some relays - pin 1

								    #define RELAY1_PIN          1

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL


								    // Some LEDs - pin 2

								    #define LED1_PIN            2

								    #define LED1_PIN_INVERSE    1


								    // A bit of I2C - pins 3,4

								    #define I2C_SDA_PIN         3

								    #define I2C_SCL_PIN         4

								    // and, as they say in "From Dusk till Dawn":

								    // This is a sensor blow out!

								    // Alright, we got white sensor, black sensor, spanish sensor, yellow sensor. We got hot sensor, cold sensor.

								    // We got wet sensor. We got smelly sensor. We got hairy sensor, bloody sensor. We got snapping sensor.

								    // We got silk sensor, velvet sensor, naugahyde sensor. We even got horse sensor, dog sensor, chicken sensor.

								    // C'mon, you want sensor, come on in sensor lovers!

								    // If we don’t got it, you don't want it!

								    #define BH1750_SUPPORT        1

								    #define BMX280_SUPPORT        1

								    #define SHT3X_I2C_SUPPORT     1

								    #define EMON_ADC121_SUPPORT   1

								    #define EMON_ADS1X15_SUPPORT  1

								    #define SHT3X_I2C_SUPPORT     1

								    #define SI7021_SUPPORT        1


								    // A bit of lights - pin 5

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_DIMMER

								    #define DUMMY_RELAY_COUNT   1

								    #define LIGHT_CHANNELS      1

								    #define LIGHT_CH1_PIN       5

								    #define LIGHT_CH1_INVERSE   0


								    // A bit of HLW8012 - pins 6,7,8

								    #ifndef HLW8012_SUPPORT

								    #define HLW8012_SUPPORT     1

								    #endif

								    #define HLW8012_SEL_PIN     6

								    #define HLW8012_CF1_PIN     7

								    #define HLW8012_CF_PIN      8


								    // A bit of Dallas - pin 9

								    #ifndef DALLAS_SUPPORT

								    #define DALLAS_SUPPORT      1

								    #endif

								    #define DALLAS_PIN          9


								    // A bit of ECH1560 - pins 10,11, 12

								    #ifndef ECH1560_SUPPORT

								    #define ECH1560_SUPPORT     1

								    #endif

								    #define ECH1560_CLK_PIN     10

								    #define ECH1560_MISO_PIN    11

								    #define ECH1560_INVERTED    12


								#elif defined(TRAVIS02)


								    // Relay provider dual

								    #define MANUFACTURER            "TravisCI"

								    #define DEVICE                  "Virtual board 02"


								    // A bit of DHT - pin 1

								    #ifndef DHT_SUPPORT

								    #define DHT_SUPPORT         1

								    #endif

								    #define DHT_PIN             1


								    // Relay type dual  - pins 2,3

								    #define RELAY_PROVIDER      RELAY_PROVIDER_DUAL

								    #define RELAY1_PIN          2

								    #define RELAY2_PIN          3

								    #define RELAY1_TYPE         RELAY_TYPE_NORMAL

								    #define RELAY2_TYPE         RELAY_TYPE_NORMAL


								    // IR - pin 4

								    #define IR_SUPPORT          1

								    #define IR_PIN              4

								    #define IR_BUTTON_SET       1


								#elif defined(TRAVIS03)


								    // Relay provider light/my92XX

								    #define MANUFACTURER            "TravisCI"

								    #define DEVICE                  "Virtual board 03"


								    // MY9231 Light - pins 1,2

								    #define RELAY_PROVIDER      RELAY_PROVIDER_LIGHT

								    #define LIGHT_PROVIDER      LIGHT_PROVIDER_MY92XX

								    #define DUMMY_RELAY_COUNT   1

								    #define LIGHT_CHANNELS      5

								    #define MY92XX_MODEL        MY92XX_MODEL_MY9231

								    #define MY92XX_CHIPS        2

								    #define MY92XX_DI_PIN       1

								    #define MY92XX_DCKI_PIN     2

								    #define MY92XX_COMMAND      MY92XX_COMMAND_DEFAULT

								    #define MY92XX_MAPPING      4, 3, 5, 0, 1


								#endif


								// -----------------------------------------------------------------------------

								// Check definitions

								// -----------------------------------------------------------------------------


								#if not defined(MANUFACTURER) || not defined(DEVICE)

								    #error "UNSUPPORTED HARDWARE!!"

								#endif