Fork of the espurna firmware for `mhsw` switches

25 KiB

Raw Blame History

ESPurna Firmware

ESPurna ("spark" in Catalan) is a custom firmware for ESP8285/ESP8266 based smart switches, lights and sensors. It uses the Arduino Core for ESP8266 framework and a number of 3rd party libraries.

Collaborators

Since November 2018, Max Prokhorov (@mcspr) is also actively working as a collaborator of the project.

Contributors

Without your help this project would not be possible. I (@xoseperez) simply can't spend all the time I wish on ESPurna but luckly I recieve a lot of contributions, bug fixes, enhancement suggestions,... from people all around the world. I would like to thank each and every one of you. The contributors page shows the ones that have done a PR in the past, but I also get contributions in the issues, by email or via the gitter ESPurna channel, those I also want to thank.

Thank you all very much.

Notice

Ladies and gentlemen in the embedded world, use PlatformIO. If I could offer you only one tip for the future, PlatformIO would be it.

Please use the gitter ESPurna channel for support and questions, you have better chances to get fast answers from me or other ESPurna users. Open an issue here only if you feel there is a bug or you want to request an enhancement. Thank you.

Process of building ESPurna from source is documented in the Wiki: Using PlatformIO IDE for VSCode
Using PlatformIO CLI
Using Arduino IDE

If you want to try out latest changes from dev branch without building the firmware yourself or if you are having problems with the stable release, please visit espurna-nightly-builder releases page.

Features

KRACK vulnerability free (when built with Arduino Core >= 2.4.0)
Support for multiple ESP8266-based boards (check list)
Power saving options
Wifi AP Mode or STA mode
- Supports static IP
- Up to 5 different networks can be defined
- Scans for strongest network if more than one defined (also available in web UI)
- Handles correctly multiple AP with the same SSID
- Defaults to AP mode (also available after double clicking the main button)
- Support for WPS and Smart Config (not available in default builds)
Network visibility
- Supports mDNS (service reporting and metadata) both server mode and client mode (.local name resolution)
- Supports NetBIOS, LLMNR and Netbios (when built with Arduino Core >= 2.4.0) and SSDP (experimental)
Switch management
- Support for push buttons and toggle switches
- Configurable status on boot per switch (always ON, always OFF, same as before or toggle)
- Support for pulse mode per switch (normally ON or normally OFF) with configurable time
- Support for relay synchronization (all equal, only one ON, one and only on ON)
- Support for MQTT groups to sync switches between devices
- Support for delayed ON/OFF
- Support for latched relays
MQTT enabled
- SSL/TLS support (not on regular builds, see #64 and #1465)
- Switch on/off and toggle relays, group topics (sync relays between different devices)
- Report button event notifications
- Enable/disable pulse mode
- Change LED notification mode
- Remote reset the board
- Fully configurable in webUI (broker, user, password, QoS, keep alive time, retain flag, client ID)
Scheduler to automatically turn on, off or toggle any relay at a given time and day, also change light intensity for dimmers
Alexa integration using the FauxmoESP Library
Google Assistant integration using IFTTT and Webhooks (Google Home, Allo)
Domoticz integration via MQTT
Home Assistant integration
- Support for switches (on/off)
- Support for lights (color, brightness, on/off state)
- Supports MQTT auto-discover feature (switches, lights and sensors)
- Integration via MQTT Discover or copy-pasting configuration code
InfluxDB integration via HTTP API
Thingspeak integration via HTTP API (HTTPS available for custom builds)
Sonoff RF Bridge support
- Multiple virtual switches (tested with up to 16)
- MQTT-to-RF two-way bridge (no need to learn codes)
- Support for https://github.com/Portisch/RF-Bridge-EFM8BB1 custom firmware
- Support for direct control of the encoder/decoder bypassing the EFM8BB1
Support for different sensors
- Environment
  - DHT11 / DHT12 / DHT22 / DHT21 / AM2301 / Itead's SI7021
  - BMP180, BMP280 and BME280 pressure, humidity (BME280) and temperature (BMP280 & BME280) sensor by Bosch
  - TMP35 and TMP36 analog temperature sensors
  - MAX6675 temperature sensor
  - NTC temperature sensors
  - SI7021 temperature and humidity sensor
  - SHT3X temperature and humidity sensor over I2C (Wemos shield)
  - AM2320 temperature and humidity sensor over I2C
  - Dallas OneWire sensors like the DS18B20
  - MHZ19 CO2 sensor
  - MICS2710 CO2 & NO2 sensor
  - MICS5525 CO & CO2 sensor
  - SenseAir S8 CO2 sensor
  - PMSX003/PMS5003T/ST dust sensors
  - SDS011 dust sensor
  - BH1750 luminosity sensor
  - GUVAS12SD UV sensor
  - VEML6075 UV Sensor
  - EZO pH Circuit
  - Geiger counter by RH Electronics
  - HC-SR04, SRF05, SRF06, DYP-ME007, JSN-SR04T & Parallax PING)))™ distance sensors
  - VL53L1X distance sensor
  - MAX6675 K-thermocouple-to-digital converter
  - NTC thermistor
  - LDR light-dependent resistor sensor
- Power monitoring
  - HLW8012 using the HLW8012 Library (Sonoff POW)
  - CSE7766 and CSE7759B power monitor chips
  - HJL-01 and BL0937 power monitor chips
  - Non-invasive current sensor using internal ADC or ADC712 or ADC121 or ADS1015 / ADS1115
  - V9261F power monitor chip
  - PZEM0004T power monitor board
  - ECH1560 power monitor chip
  - ADE7953 power monitor chip
- Raw analog and digital sensors
- Simple pulse counter with event triggering option
- Support for (almost) any UART based sensor via the UART-to-MQTT module
- Support for different units (Fahrenheit or Celsius, Watts or Kilowatts, Joules or kWh)
Support for LED lights
- MY92XX-based light bulbs and PWM LED strips (dimmers) up to 5 channels (RGB, cold white and warm white, for instance)
- Support for CCT lights
- RGB and HSV color codes supported
- Manage channels individually
- Temperature color supported (in mired and kelvin) via MQTT / REST API
- Flicker-free PWM management
- Soft color transitions
- Color synchronization between light using MQTT
- Option to have separate switches for each channel
Support for simple 433MHz RF receivers
Support for UART-to-MQTT bidirectional bridge
Fast asynchronous HTTP Server and cool Web User Interface
- Configurable port
- Basic authentication
- Web-based configuration
- Relay switching and sensor data from the web interface
- Handle color, brightness, and white/warm channels for lights
- Websockets-based communication between the device and the browser
- Backup and restore settings option
- Upgrade firmware from the web interface
- Works great behind a secured reverse proxy
REST API (enable/disable from web interface)
- GET and PUT relay status (including pulses)
- Change light color (for supported hardware)
- GET sensor data (power, current, voltage, temperature and humidity) depending on the available hardware
- Works great behind a secured reverse proxy
RPC API (enable/disable from web interface)
- Remote reset the board
Over-The-Air (OTA) updates even for 1Mb boards
- Manually from PlatformIO or Arduino IDE
- Automatic updates through the NoFUSS Library
- Update from web interface using pre-built images
Command line configuration
- Change configuration
- Run special commands
Telnet support
- Enable/disable via the web UI
- Shows debug info and allows to run terminal commands
NTP for time synchronization
- Supports worldwide time zones
- Compatible with DST (EU and USA)
Unstable system check
- Detects unstable system (crashes on boot continuously) and defaults to a stable system
- Only WiFi AP, OTA and Telnet available if system is flagged as unstable
Configurable LED notifications based on WiFi status, relays status or MQTT messages.
Button interface
- Click to toggle relays
- Double click to enter AP mode (only main button)
- Long click (>1 second) to reboot device (only main button)
- Extra long click (>10 seconds) to go back to factory settings (only main button)
- Specific definitions for touch button devices (ESPurna Switch, Sonoff Touch & T1)
Configuration stored in different flash sectors to prevent data loss and corruption

Notices

2018-04-08
Please use gitter for support and questions, you have better chances to get fast answers by me or other ESPurna users. Open an issue here only if you feel there is a bug or you want to request an enhancement. Thank you.

2018-03-09
Default branch in GitHub is now the development branch "dev".
The stable branch (the one used to create the binary releases) is "master".

2018-01-24
This repository has been migrated from Bitbucket to GitHub. There were a number of reason to migrate the repository to GitHub. I like Bitbucket and I'm still using it for a lot of projects, but ESPurna has grown and its community as well. Some users have complain about Bitbucket not being enough community-focused. This change is mainly aimed to use a platform with greater acceptance on the open-source community and tools better suited to them (to you), like the possibility to contribute to the documentation in an easy way.

What happened with all the info in Bitbucket? Well, most of it has been ported to GitHub, albeit with some quirks:

Code has, of course been migrated completely

Issues are all on GitHub already but all issues and comments show up as reported by me. The original reporter is referenced inside the body of the issue (or comment) with a link to his/her profile at Bitbucket and a link to his/her profile at GitHub if it happens to be the same username. I suggest all reporters to subscribe to the issues they originally filed (search for your BitBucket username to list them).

Pull requests historic has not been migrated. At the moment of the migration all pull-requests have been either merged or declined. Of course, those PR merged are in the code base, but the historic and comments in the PR pages will be lost.

Documentation it's on it way, first step will be to migrate existing wiki, maybe with a new TOC structure

Watchers, Forks, I'm afraid they are all gone. Visit the new repo home and click on the "Watch" button on the top right. And as you do it click also on the "Star" button too :)

I apologize for any inconvenience this migration may have caused. I have decided to do it the hard way.

2018-01-11
As of current version (1.12.0) ESPurna is tested using Arduino Core 2.3.0 and it's meant to be built against that version.

2017-08-26
Since version 1.9.0 the default MQTT topics for commands have changed. They all now end with "/set". This means you will have to change your controller software (Node-RED or alike) to send messages to -for instance- "/home/living/light/relay/0/set". The device will publish its state in "/home/living/light/relay/0" like before.

2017-07-24
Default flash layout changed in 1.8.3, as an unpredicted consequence devices will not be able to persist/retrieve configuration if flashed with 1.8.3 via OTA from PlatformIO. Please check issue #187.

Contribute

There are several ways to contribute to ESPurna development. You can contribute to the repository by doing:

Pull requests (fixes, enhancements, new features... are very welcome)
Documentation (I reckon I'm bad at it)
Testing (filing issues or help resolving them, they take a lot of time and sometimes I don't have the required hardware to test them all)

And of course you can always buy me a beer, coffee, tea,... via the donation button below.

Documentation

For more information please refer to the ESPurna Wiki.

Supported hardware

Here is the list of supported hardware. For more information please refer to the ESPurna Wiki Hardware page.

Power monitoring devices



Blitzwolf BW-SHP6	Blitzwolf BW-SHP2 (also by Coosa, Gosund, HomeCube, Teckin)	Power meters based on V9261F

Itead Sonoff POW	Itead Sonoff POW R2	Itead Sonoff S31

Smartlife (NETVIP) Mini Smart Socket	Teckin SP20	Digoo NX SP202

Vanzavanzu Smart WiFi Plug Mini

Embedded switches



Itead Sonoff Basic	Itead Sonoff Dual/Dual R2	Itead Sonoff TH10/TH16

Electrodragon WiFi IOT	OpenEnergyMonitor WiFi MQTT Relay / Thermostat

Itead Sonoff 4CH	Itead Sonoff 4CH Pro

Alterco Shelly1	Alterco Shelly2	Jan Goedeke Wifi Relay (NO/NC)

EXS Wifi Relay v3.1	EXS Wifi Relay v5.0	Jorge García Wifi + Relays Board Kit

Allnet ESP8266-UP-Relay	Bruno Horta's OnOfre	Luani HVIO

Wall Sockets



Itead S20	Itead S26	Neo Coolcam NAS WR01W

Maxcio W-US002S	HEYGO HY02	YiDian XS-SSA05

WiOn 50055	LINGAN SWA1	HomeCube 16A

WorkChoice EcoPlug	Bestek MRJ1011	Tonbux XS-SSA01

Schuko Wifi Plug	Schuko Wifi Plug V2	KMC 70011

Xenon SM-PW702U	Orvibo B25	Oukitel P1

Tonbux XS-SSA06	Litesun LA-WF3	Maxcio W DE-004

Hama WiFi Steckdose	GBLife RGBW Socket

Wall switches



Itead Sonoff Touch	Itead Sonoff T1	YJZK 1/2/3-gangs switch

Gosund WS1 / KS-602S

Power strips



Tonbux PowerStrip02	Fornorm Power Strip	Zhilde ZLD-EU55-W

Smart lights



Itead Slampher	Arilux E27	Itead Sonoff B1

AI-Thinker Wifi Light / Noduino OpenLight	Authometion LYT8266	AG-L4

Lohas 9W	Xiaomi Smart Desk Lamp	iWoole LED Table Lamp

Itead Sonoff LED	Itead BN-SZ01	Lombex LUX Nova 2 (white and color)

Arilux AL-LC01 (RGB)	Arilux AL-LC02 (RGBW)	Arilux AL-LC06 (RGBWWCW)

Arilux AL-LC11 (RGBWWW) & RF	MagicHome LED Controller (1.0/2.x, also ZJ WFMN A/B11)	Huacanxing H801/802

Radio links / gateways



Tinkerman RFM69GW	Itead Sonoff RF Bridge	Itead Sonoff RF

Other devices



Tonbux Mosquito Killer	Itead Sonoff IFAN02

Custom & Development boards



Tinkerman ESPurna H		NodeMCU Lolin V3

Itead Sonoff SV	Itead 1CH Inching	Itead Motor Clockwise/Anticlockwise

ManCaveMade ESP-Live	Wemos D1 Mini Relay Shield	Gizwits Witty Cloud

IKE ESPike	Pilotak ESP DIN	Arniex Swifitch

Heltec Touch Relay	Generic Relay v4.0	Generic RGBLed v1.0

Generic DHT11 v1.0	Generic DS18B20 v1.0	InterMitTech QuinLED 2.6

Phyx ESP12 RGBW	RH Electronics Geiger Counter	Green ESP Relay

Foxel Lightfox Dual

Other supported boards (beta): KMC 4 Outlet, Gosund WS1, MakerFocus Intelligent Module LM33 for Lamps

License

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/.

25 KiB Raw Blame History