Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

691 lines
20 KiB

// -----------------------------------------------------------------------------
// Devices
// -----------------------------------------------------------------------------
// New devices have to be added just before the DEVICE_LAST line,
// then add configuration in the hardware.ino
enum devices {
DEVICE_UNKNOWN,
DEVICE_CUSTOM,
DEVICE_NODEMCU_LOLIN,
DEVICE_WEMOS_D1_MINI_RELAYSHIELD,
DEVICE_ITEAD_SONOFF_BASIC,
DEVICE_ITEAD_SONOFF_TH,
DEVICE_ITEAD_SONOFF_SV,
DEVICE_ITEAD_SONOFF_TOUCH,
DEVICE_ITEAD_SONOFF_POW,
DEVICE_ITEAD_SONOFF_DUAL,
DEVICE_ITEAD_1CH_INCHING,
DEVICE_ITEAD_SONOFF_4CH,
DEVICE_ITEAD_SLAMPHER,
DEVICE_ITEAD_S20,
DEVICE_ELECTRODRAGON_WIFI_IOT,
DEVICE_WORKCHOICE_ECOPLUG,
DEVICE_JANGOE_WIFI_RELAY_NC,
DEVICE_JANGOE_WIFI_RELAY_NO,
DEVICE_OPENENERGYMONITOR_MQTT_RELAY,
DEVICE_JORGEGARCIA_WIFI_RELAYS,
DEVICE_AITHINKER_AI_LIGHT,
DEVICE_MAGICHOME_LED_CONTROLLER,
DEVICE_ITEAD_MOTOR,
DEVICE_TINKERMAN_ESPURNA_H06,
DEVICE_HUACANXING_H801,
DEVICE_ITEAD_BNSZ01,
DEVICE_ITEAD_SONOFF_RFBRIDGE,
DEVICE_ITEAD_SONOFF_4CH_PRO,
DEVICE_ITEAD_SONOFF_B1,
DEVICE_ITEAD_SONOFF_LED,
DEVICE_ITEAD_SONOFF_T1_1CH,
DEVICE_ITEAD_SONOFF_T1_2CH,
DEVICE_ITEAD_SONOFF_T1_3CH,
DEVICE_ITEAD_SONOFF_RF,
DEVICE_WION_50055,
DEVICE_EXS_WIFI_RELAY_V31,
DEVICE_HUACANXING_H802,
DEVICE_GENERIC_V9261F,
DEVICE_GENERIC_ECH1560,
DEVICE_TINKERMAN_ESPURNA_H08,
DEVICE_MANCAVEMADE_ESPLIVE,
DEVICE_INTERMITTECH_QUINLED,
DEVICE_MAGICHOME_LED_CONTROLLER_20,
DEVICE_ARILUX_AL_LC06,
DEVICE_XENON_SM_PW702U,
DEVICE_AUTHOMETION_LYT8266,
DEVICE_ARILUX_E27,
DEVICE_YJZK_SWITCH_2CH,
DEVICE_ITEAD_SONOFF_DUAL_R2,
DEVICE_GENERIC_8CH,
DEVICE_ARILUX_AL_LC01,
DEVICE_ARILUX_AL_LC11,
DEVICE_ARILUX_AL_LC02,
DEVICE_KMC_70011,
DEVICE_GIZWITS_WITTY_CLOUD,
DEVICE_EUROMATE_WIFI_STECKER_SCHUKO,
DEVICE_TONBUX_POWERSTRIP02,
DEVICE_LINGAN_SWA1,
DEVICE_HEYGO_HY02,
DEVICE_MAXCIO_WUS002S,
DEVICE_YIDIAN_XSSSA05,
DEVICE_TONBUX_XSSSA06,
DEVICE_GREEN_ESP8266RELAY,
DEVICE_IKE_ESPIKE,
DEVICE_ARNIEX_SWIFITCH,
DEVICE_GENERIC_ESP01S_RELAY_V40,
DEVICE_GENERIC_ESP01S_RGBLED_V10,
DEVICE_HELTEC_TOUCHRELAY,
DEVICE_GENERIC_ESP01S_DHT11_V10,
DEVICE_GENERIC_ESP01S_DS18B20_V10,
DEVICE_ZHILDE_EU44_W,
DEVICE_ITEAD_SONOFF_POW_R2,
DEVICE_LUANI_HVIO,
DEVICE_ALLNET_4DUINO_IOT_WLAN_RELAIS,
DEVICE_TONBUX_MOSQUITO_KILLER,
DEVICE_NEO_COOLCAM_NAS_WR01W,
DEVICE_PILOTAK_ESP_DIN_V1,
DEVICE_ESTINK_WIFI_POWER_STRIP,
DEVICE_BH_ONOFRE,
DEVICE_BLITZWOLF_BWSHP2,
DEVICE_TINKERMAN_ESPURNA_SWITCH,
DEVICE_ITEAD_SONOFF_S31,
DEVICE_STM_RELAY,
DEVICE_VANZAVANZU_SMART_WIFI_PLUG_MINI,
DEVICE_GENERIC_GEIGER_COUNTER,
DEVICE_TINKERMAN_RFM69GW,
DEVICE_ITEAD_SONOFF_IFAN02,
DEVICE_GENERIC_AG_L4,
DEVICE_HOMECUBE_16A,
DEVICE_ALLTERCO_SHELLY1,
DEVICE_LOHAS_9W,
DEVICE_YJZK_SWITCH_1CH,
DEVICE_YJZK_SWITCH_3CH,
DEVICE_XIAOMI_SMART_DESK_LAMP,
DEVICE_ALLTERCO_SHELLY2,
DEVICE_PHYX_ESP12_RGB,
DEVICE_LAST
};
// -----------------------------------------------------------------------------
// Board => Image type
// -----------------------------------------------------------------------------
#if \
defined(ALLNET_4DUINO_IOT_WLAN_RELAIS) || \
defined(ALLTERCO_SHELLY1) || \
defined(ARNIEX_SWIFITCH) || \
defined(BH_ONOFRE) || \
defined(ELECTRODRAGON_WIFI_IOT) || \
defined(ESTINK_WIFI_POWER_STRIP) || \
defined(EUROMATE_WIFI_STECKER_SCHUKO) || \
defined(EXS_WIFI_RELAY_V31) || \
defined(GENERIC_8CH) || \
defined(GENERIC_ESP01S_RELAY_V40) || \
defined(GENERIC_ESP01S_RGBLED_V10) || \
defined(GREEN_ESP8266RELAY) || \
defined(HELTEC_TOUCHRELAY) || \
defined(HEYGO_HY02) || \
defined(IKE_ESPIKE) || \
defined(ITEAD_1CH_INCHING) || \
defined(ITEAD_MOTOR) || \
defined(ITEAD_S20) || \
defined(ITEAD_SLAMPHER) || \
defined(ITEAD_SONOFF_4CH) || \
defined(ITEAD_SONOFF_4CH_PRO) || \
defined(ITEAD_SONOFF_BASIC) || \
defined(ITEAD_SONOFF_DUAL_R2) || \
defined(ITEAD_SONOFF_IFAN02) || \
defined(ITEAD_SONOFF_RF) || \
defined(ITEAD_SONOFF_SV) || \
defined(ITEAD_SONOFF_T1_1CH) || \
defined(ITEAD_SONOFF_T1_2CH) || \
defined(ITEAD_SONOFF_T1_3CH) || \
defined(ITEAD_SONOFF_TOUCH) || \
defined(JANGOE_WIFI_RELAY_NC) || \
defined(JANGOE_WIFI_RELAY_NO) || \
defined(JORGEGARCIA_WIFI_RELAYS) || \
defined(LINGAN_SWA1) || \
defined(LUANI_HVIO) || \
defined(NEO_COOLCAM_NAS_WR01W) || \
defined(NODEMCU_LOLIN) || \
defined(OPENENERGYMONITOR_MQTT_RELAY) || \
defined(TINKERMAN_ESPURNA_SWITCH) || \
defined(TONBUX_MOSQUITO_KILLER) || \
defined(TONBUX_POWERSTRIP02) || \
defined(TONBUX_XSSSA06) || \
defined(WEMOS_D1_MINI_RELAYSHIELD) || \
defined(WION_50055) || \
defined(WORKCHOICE_ECOPLUG) || \
defined(XENON_SM_PW702U) || \
defined(YJZK_SWITCH_1CH) || \
defined(YJZK_SWITCH_2CH) || \
defined(YJZK_SWITCH_3CH) || \
defined(ZHILDE_EU44_W)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_BASIC
// -----------------------------------------------------------------------------
#elif \
defined(BLITZWOLF_BWSHP2) || \
defined(HOMECUBE_16A) || \
defined(ITEAD_SONOFF_POW) || \
defined(KMC_70011) || \
defined(MAXCIO_WUS002S) || \
defined(TINKERMAN_ESPURNA_H06) || \
defined(TINKERMAN_ESPURNA_H08) || \
defined(VANZAVANZU_SMART_WIFI_PLUG_MINI) || \
defined(YIDIAN_XSSSA05)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_HLW8012
// -----------------------------------------------------------------------------
#elif \
defined(ITEAD_SONOFF_POW_R2) || \
defined(ITEAD_SONOFF_S31)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_CSE77XX
// -----------------------------------------------------------------------------
#elif defined(GENERIC_V9261F)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_V9261F
// -----------------------------------------------------------------------------
#elif defined(GENERIC_ECH1560)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_ECH1560
// -----------------------------------------------------------------------------
#elif \
defined(ARILUX_AL_LC01) || \
defined(ARILUX_AL_LC02) || \
defined(ARILUX_AL_LC06) || \
defined(ARILUX_AL_LC11) || \
defined(AUTHOMETION_LYT8266) || \
defined(GENERIC_AG_L4) || \
defined(HUACANXING_H801) || \
defined(HUACANXING_H802) || \
defined(INTERMITTECH_QUINLED) || \
defined(ITEAD_BNSZ01) || \
defined(ITEAD_SONOFF_LED)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_DIMMER
// -----------------------------------------------------------------------------
#elif \
defined(AITHINKER_AI_LIGHT) || \
defined(ARILUX_E27) || \
defined(ITEAD_SONOFF_B1) || \
defined(LOHAS_9W)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_MY92XX
// -----------------------------------------------------------------------------
#elif \
defined(GENERIC_ESP01S_DHT11_V10) || \
defined(GENERIC_ESP01S_DS18B20_V10) || \
defined(ITEAD_SONOFF_TH) || \
defined(MANCAVEMADE_ESPLIVE)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_SENSOR
// -----------------------------------------------------------------------------
#elif defined(TINKERMAN_RFM69GW)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_RFM69
// -----------------------------------------------------------------------------
#elif defined(ITEAD_SONOFF_DUAL)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_SONOFF_DUAL
// -----------------------------------------------------------------------------
#elif defined(STM_RELAY)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_STM
// -----------------------------------------------------------------------------
#elif defined(GENERIC_GEIGER_COUNTER)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_GEIGER
// -----------------------------------------------------------------------------
// PENDING
// -----------------------------------------------------------------------------
#elif defined(ITEAD_SONOFF_RFBRIDGE)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_SONOFF_RFBRIDGE
// Info
#define RELAY_PROVIDER RELAY_PROVIDER_RFBRIDGE
// RFB Direct hack thanks to @wildwiz
// https://github.com/xoseperez/espurna/wiki/Hardware-Itead-Sonoff-RF-Bridge---Direct-Hack
#ifndef RFB_DIRECT
#define RFB_DIRECT 0
#endif
#ifndef RFB_RX_PIN
#define RFB_RX_PIN 4 // GPIO for RX when RFB_DIRECT
#endif
#ifndef RFB_TX_PIN
#define RFB_TX_PIN 5 // GPIO for TX when RFB_DIRECT
#endif
// When using un-modified harware, ESPurna communicates with the secondary
// MCU EFM8BB1 via UART at 19200 bps so we need to change the speed of
// the port and remove UART noise on serial line
#if not RFB_DIRECT
#define SERIAL_BAUDRATE 19200
#define DEBUG_SERIAL_SUPPORT 0
#endif
// -----------------------------------------------------------------------------
#elif defined(PILOTAK_ESP_DIN_V1)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_SENSOR
#ifndef RF_SUPPORT
#define RF_SUPPORT 1 // Does this need the RFBRIDGE image?
#endif
#define RF_PIN 14
// -----------------------------------------------------------------------------
#elif defined(MAGICHOME_LED_CONTROLLER)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_DIMMER
// IR
#define IR_SUPPORT 1
#define IR_RECEIVER_PIN 4
#define IR_BUTTON_SET 1
#elif defined(MAGICHOME_LED_CONTROLLER_20)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_DIMMER
// IR
#define IR_SUPPORT 1
#define IR_RECEIVER_PIN 4
#define IR_BUTTON_SET 1
#elif defined(GIZWITS_WITTY_CLOUD)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_DIMMER
#define ANALOG_SUPPORT 1 // TODO: specific or generic?
// -----------------------------------------------------------------------------
// TEST devices (do not use!!)
// -----------------------------------------------------------------------------
#elif defined(TRAVIS01)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_BASIC
// A bit of I2C - pins 3,4
#define I2C_SDA_PIN 3
#define I2C_SCL_PIN 4
// And, as they say in "From Dusk till Dawn":
// This is a sensor blow out!
// Alright, we got white sensor, black sensor, spanish sensor, yellow sensor. We got hot sensor, cold sensor.
// We got wet sensor. We got smelly sensor. We got hairy sensor, bloody sensor. We got snapping sensor.
// We got silk sensor, velvet sensor, naugahyde sensor. We even got horse sensor, dog sensor, chicken sensor.
// C'mon, you want sensor, come on in sensor lovers!
// If we don’t got it, you don't want it!
#define AM2320_SUPPORT 1
#define BH1750_SUPPORT 1
#define BMX280_SUPPORT 1
#define SHT3X_I2C_SUPPORT 1
#define EMON_ADC121_SUPPORT 1
#define EMON_ADS1X15_SUPPORT 1
#define SHT3X_I2C_SUPPORT 1
#define SI7021_SUPPORT 1
#define PMSX003_SUPPORT 1
#define SENSEAIR_SUPPORT 1
// A bit of lights - pin 5
#define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
#define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
#define DUMMY_RELAY_COUNT 1
#define LIGHT_CHANNELS 1
#define LIGHT_CH1_PIN 5
#define LIGHT_CH1_INVERSE 0
// A bit of HLW8012 - pins 6,7,8
#ifndef HLW8012_SUPPORT
#define HLW8012_SUPPORT 1
#endif
#define HLW8012_SEL_PIN 6
#define HLW8012_CF1_PIN 7
#define HLW8012_CF_PIN 8
// A bit of Dallas - pin 9
#ifndef DALLAS_SUPPORT
#define DALLAS_SUPPORT 1
#endif
#define DALLAS_PIN 9
// A bit of ECH1560 - pins 10,11, 12
#ifndef ECH1560_SUPPORT
#define ECH1560_SUPPORT 1
#endif
#define ECH1560_CLK_PIN 10
#define ECH1560_MISO_PIN 11
#define ECH1560_INVERTED 12
#elif defined(TRAVIS02)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_BASIC
// A bit of CSE7766 - pin 1
#ifndef CSE7766_SUPPORT
#define CSE7766_SUPPORT 1
#endif
#define CSE7766_PIN 1
// Relay type dual - pins 2,3
#define RELAY_PROVIDER RELAY_PROVIDER_DUAL
#define RELAY1_PIN 2
#define RELAY2_PIN 3
#define RELAY1_TYPE RELAY_TYPE_NORMAL
#define RELAY2_TYPE RELAY_TYPE_NORMAL
// IR - pin 4
#define IR_SUPPORT 1
#define IR_RECEIVER_PIN 4
#define IR_BUTTON_SET 1
// A bit of DHT - pin 5
#ifndef DHT_SUPPORT
#define DHT_SUPPORT 1
#endif
#define DHT_PIN 5
// A bit of TMP3X (analog)
#define TMP3X_SUPPORT 1
// A bit of EVENTS - pin 10
#define EVENTS_SUPPORT 1
#define EVENTS_PIN 6
// Sonar
#define SONAR_SUPPORT 1
#define SONAR_TRIGGER 7
#define SONAR_ECHO 8
// MHZ19
#define MHZ19_SUPPORT 1
#define MHZ19_RX_PIN 9
#define MHZ19_TX_PIN 10
// PZEM004T
#define PZEM004T_SUPPORT 1
#define PZEM004T_RX_PIN 11
#define PZEM004T_TX_PIN 12
// V9261F
#define V9261F_SUPPORT 1
#define V9261F_PIN 13
// GUVAS12SD
#define GUVAS12SD_SUPPORT 1
#define GUVAS12SD_PIN 14
// Test non-default modules
#define MDNS_CLIENT_SUPPORT 1
#define NOFUSS_SUPPORT 1
#define UART_MQTT_SUPPORT 1
#define INFLUXDB_SUPPORT 1
#define IR_SUPPORT 1
#elif defined(TRAVIS03)
#undef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_BASIC
// MY9231 Light - pins 1,2
#define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
#define LIGHT_PROVIDER LIGHT_PROVIDER_MY92XX
#define DUMMY_RELAY_COUNT 1
#define LIGHT_CHANNELS 5
#define MY92XX_MODEL MY92XX_MODEL_MY9231
#define MY92XX_CHIPS 2
#define MY92XX_DI_PIN 1
#define MY92XX_DCKI_PIN 2
#define MY92XX_COMMAND MY92XX_COMMAND_DEFAULT
#define MY92XX_MAPPING 4, 3, 5, 0, 1
// A bit of Analog EMON (analog)
#ifndef EMON_ANALOG_SUPPORT
#define EMON_ANALOG_SUPPORT 1
#endif
// Test non-default modules
#define LLMNR_SUPPORT 1
#define NETBIOS_SUPPORT 1
#define SSDP_SUPPORT 1
#endif
// -----------------------------------------------------------------------------
// ESPurna Core
// This is a special device targeted to generate a light-weight binary image
// meant to be able to do two-step-updates:
// https://github.com/xoseperez/espurna/wiki/TwoStepUpdates
// -----------------------------------------------------------------------------
#ifndef ESPURNA_IMAGE
#define ESPURNA_IMAGE ESPURNA_CORE
#endif
// -----------------------------------------------------------------------------
// Image definitions
// -----------------------------------------------------------------------------
#if ESPURNA_IMAGE == ESPURNA_CORE
#define ESPURNA_IMAGE_NAME "CORE"
// Disable non-core modules
#define ALEXA_SUPPORT 0
#define API_SUPPORT 0
#define BROKER_SUPPORT 0
#define BUTTON_SUPPORT 0
#define DOMOTICZ_SUPPORT 0
#define HOMEASSISTANT_SUPPORT 0
#define I2C_SUPPORT 0
#define MDNS_SERVER_SUPPORT 0
#define MQTT_SUPPORT 0
#define NTP_SUPPORT 0
#define SCHEDULER_SUPPORT 0
#define SENSOR_SUPPORT 0
#define THINGSPEAK_SUPPORT 0
#define WEB_SUPPORT 0
// Extra light-weight image
//#define DEBUG_SERIAL_SUPPORT 0
//#define DEBUG_TELNET_SUPPORT 0
//#define DEBUG_WEB_SUPPORT 0
//#define LED_SUPPORT 0
//#define TELNET_SUPPORT 0
//#define TERMINAL_SUPPORT 0
#elif ESPURNA_IMAGE == ESPURNA_BASIC
#define ESPURNA_IMAGE_NAME "BASIC"
#elif ESPURNA_IMAGE == ESPURNA_DIMMER
#define ESPURNA_IMAGE_NAME "DIMMER"
#define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
#define LIGHT_PROVIDER LIGHT_PROVIDER_DIMMER
#elif ESPURNA_IMAGE == ESPURNA_MY92XX
#define ESPURNA_IMAGE_NAME "MY92XX"
#define RELAY_PROVIDER RELAY_PROVIDER_LIGHT
#define LIGHT_PROVIDER LIGHT_PROVIDER_MY92XX
#define MY92XX_COMMAND MY92XX_COMMAND_DEFAULT
#elif ESPURNA_IMAGE == ESPURNA_EMON
#define ESPURNA_IMAGE_NAME "EMON"
#ifndef EMON_ANALOG_SUPPORT
#define EMON_ANALOG_SUPPORT 1
#endif
#ifndef EMON_ADC121_SUPPORT
#define EMON_ADC121_SUPPORT 1
#endif
#ifndef EMON_ADS1X15_SUPPORT
#define EMON_ADS1X15_SUPPORT 1
#endif
#elif ESPURNA_IMAGE == ESPURNA_HLW8012
#define ESPURNA_IMAGE_NAME "HLW8012"
#ifndef HLW8012_SUPPORT
#define HLW8012_SUPPORT 1
#endif
#elif ESPURNA_IMAGE == ESPURNA_CSE77XX
#define ESPURNA_IMAGE_NAME "CSE77XX"
#ifndef CSE7766_SUPPORT
#define CSE7766_SUPPORT 1
#endif
#elif ESPURNA_IMAGE == ESPURNA_V9261F
#define ESPURNA_IMAGE_NAME "V9261F"
#ifndef V9261F_SUPPORT
#define V9261F_SUPPORT 1
#endif
#ifndef ALEXA_SUPPORT
#define ALEXA_SUPPORT 0
#endif
#elif ESPURNA_IMAGE == ESPURNA_ECH1560
#define ESPURNA_IMAGE_NAME "ECH1560"
#ifndef ECH1560_SUPPORT
#define ECH1560_SUPPORT 1
#endif
#ifndef ALEXA_SUPPORT
#define ALEXA_SUPPORT 0
#endif
#elif ESPURNA_IMAGE == ESPURNA_SENSOR
#define ESPURNA_IMAGE_NAME "SENSOR"
#ifndef ANALOG_SUPPORT
#define ANALOG_SUPPORT 1
#endif
#ifndef DALLAS_SUPPORT
#define DALLAS_SUPPORT 1
#endif
#ifndef DHT_SUPPORT
#define DHT_SUPPORT 1
#endif
#ifndef DIGITAL_SUPPORT
#define DIGITAL_SUPPORT 1
#endif
#elif ESPURNA_IMAGE == ESPURNA_SONOFF_DUAL
#define ESPURNA_IMAGE_NAME "SONOFF_DUAL"
#define RELAY_PROVIDER RELAY_PROVIDER_DUAL
#elif ESPURNA_IMAGE == ESPURNA_SONOFF_RFBRIDGE
#define ESPURNA_IMAGE_NAME "SONOFF_RFBRIDGE"
#elif ESPURNA_IMAGE == ESPURNA_RFM69
#define ESPURNA_IMAGE_NAME "RFM69"
// RFM69GW
#define RFM69_SUPPORT 1
// Disable non-core modules
#define ALEXA_SUPPORT 0
#define DOMOTICZ_SUPPORT 0
#define HOMEASSISTANT_SUPPORT 0
#define I2C_SUPPORT 0
#define SCHEDULER_SUPPORT 0
#define SENSOR_SUPPORT 0
#define THINGSPEAK_SUPPORT 0
#elif ESPURNA_IMAGE == ESPURNA_STM
#define ESPURNA_IMAGE_NAME "STM"
#define RELAY_PROVIDER RELAY_PROVIDER_STM
#elif ESPURNA_IMAGE == ESPURNA_GEIGER
#define ESPURNA_IMAGE_NAME "GEIGER"
// Enable Geiger Counter
#define GEIGER_SUPPORT 1
// Disable uneeded modules
#define ALEXA_SUPPORT 0
#define SCHEDULER_SUPPORT 0
#endif