Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 

333 lines
11 KiB

// -----------------------------------------------------------------------------
// Event Counter Sensor
// Copyright (C) 2017-2018 by Xose Pérez <xose dot perez at gmail dot com>
// -----------------------------------------------------------------------------
#if SENSOR_SUPPORT && HLW8012_SUPPORT
#pragma once
#include "Arduino.h"
#include "BaseSensor.h"
#include <HLW8012.h>
class HLW8012Sensor : public BaseSensor {
public:
// ---------------------------------------------------------------------
// Public
// ---------------------------------------------------------------------
HLW8012Sensor(): BaseSensor() {
_count = 7;
_sensor_id = SENSOR_HLW8012_ID;
_hlw8012 = new HLW8012();
}
~HLW8012Sensor() {
_enableInterrupts(false);
delete _hlw8012;
}
void expectedCurrent(double expected) {
_hlw8012->expectedCurrent(expected);
}
void expectedVoltage(unsigned int expected) {
_hlw8012->expectedVoltage(expected);
}
void expectedPower(unsigned int expected) {
_hlw8012->expectedActivePower(expected);
}
void resetRatios() {
_hlw8012->resetMultipliers();
}
void resetEnergy(double value = 0) {
_energy_offset = value;
_hlw8012->resetEnergy();
}
// ---------------------------------------------------------------------
void setSEL(unsigned char sel) {
if (_sel == sel) return;
_sel = sel;
_dirty = true;
}
void setCF(unsigned char cf) {
if (_cf == cf) return;
_cf = cf;
_dirty = true;
}
void setCF1(unsigned char cf1) {
if (_cf1 == cf1) return;
_cf1 = cf1;
_dirty = true;
}
void setSELCurrent(bool value) {
_sel_current = value;
}
void setCurrentRatio(double value) {
_hlw8012->setCurrentMultiplier(value);
};
void setVoltageRatio(double value) {
_hlw8012->setVoltageMultiplier(value);
};
void setPowerRatio(double value) {
_hlw8012->setPowerMultiplier(value);
};
// ---------------------------------------------------------------------
unsigned char getSEL() {
return _sel;
}
unsigned char getCF() {
return _cf;
}
unsigned char getCF1() {
return _cf1;
}
unsigned char getSELCurrent() {
return _sel_current;
}
double getCurrentRatio() {
return _hlw8012->getCurrentMultiplier();
};
double getVoltageRatio() {
return _hlw8012->getVoltageMultiplier();
};
double getPowerRatio() {
return _hlw8012->getPowerMultiplier();
};
// ---------------------------------------------------------------------
// Sensors API
// ---------------------------------------------------------------------
// Initialization method, must be idempotent
// Defined outside the class body
void begin() {
// Initialize HLW8012
// void begin(unsigned char cf_pin, unsigned char cf1_pin, unsigned char sel_pin, unsigned char currentWhen = HIGH, bool use_interrupts = false, unsigned long pulse_timeout = PULSE_TIMEOUT);
// * cf_pin, cf1_pin and sel_pin are GPIOs to the HLW8012 IC
// * currentWhen is the value in sel_pin to select current sampling
// * set use_interrupts to true to use interrupts to monitor pulse widths
// * leave pulse_timeout to the default value, recommended when using interrupts
#if HLW8012_USE_INTERRUPTS
_hlw8012->begin(_cf, _cf1, _sel, _sel_current, true);
#else
_hlw8012->begin(_cf, _cf1, _sel, _sel_current, false, 1000000);
#endif
// These values are used to calculate current, voltage and power factors as per datasheet formula
// These are the nominal values for the Sonoff POW resistors:
// * The CURRENT_RESISTOR is the 1milliOhm copper-manganese resistor in series with the main line
// * The VOLTAGE_RESISTOR_UPSTREAM are the 5 470kOhm resistors in the voltage divider that feeds the V2P pin in the HLW8012
// * The VOLTAGE_RESISTOR_DOWNSTREAM is the 1kOhm resistor in the voltage divider that feeds the V2P pin in the HLW8012
_hlw8012->setResistors(HLW8012_CURRENT_R, HLW8012_VOLTAGE_R_UP, HLW8012_VOLTAGE_R_DOWN);
// Handle interrupts
#if HLW8012_USE_INTERRUPTS
#if HLW8012_WAIT_FOR_WIFI == 0
_enableInterrupts(false);
_enableInterrupts(true);
#endif
#endif
_ready = true;
}
// Descriptive name of the sensor
String description() {
char buffer[25];
snprintf(buffer, sizeof(buffer), "HLW8012 @ GPIO(%u,%u,%u)", _sel, _cf, _cf1);
return String(buffer);
}
// Descriptive name of the slot # index
String slot(unsigned char index) {
return description();
};
// Address of the sensor (it could be the GPIO or I2C address)
String address(unsigned char index) {
char buffer[10];
snprintf(buffer, sizeof(buffer), "%u:%u:%u", _sel, _cf, _cf1);
return String(buffer);
}
// Type for slot # index
unsigned char type(unsigned char index) {
if (index == 0) return MAGNITUDE_CURRENT;
if (index == 1) return MAGNITUDE_VOLTAGE;
if (index == 2) return MAGNITUDE_POWER_ACTIVE;
if (index == 3) return MAGNITUDE_POWER_REACTIVE;
if (index == 4) return MAGNITUDE_POWER_APPARENT;
if (index == 5) return MAGNITUDE_POWER_FACTOR;
if (index == 6) return MAGNITUDE_ENERGY;
return MAGNITUDE_NONE;
}
// Current value for slot # index
double value(unsigned char index) {
if (index == 0) return _hlw8012->getCurrent();
if (index == 1) return _hlw8012->getVoltage();
if (index == 2) return _hlw8012->getActivePower();
if (index == 3) return _hlw8012->getReactivePower();
if (index == 4) return _hlw8012->getApparentPower();
if (index == 5) return 100 * _hlw8012->getPowerFactor();
if (index == 6) return (_energy_offset + _hlw8012->getEnergy());
return 0;
}
// Pre-read hook (usually to populate registers with up-to-date data)
#if HLW8012_USE_INTERRUPTS
#if HLW8012_WAIT_FOR_WIFI
void pre() {
_enableInterrupts(wifiConnected());
}
#endif
#endif
// Toggle between current and voltage monitoring
#if HLW8012_USE_INTERRUPTS == 0
// Post-read hook (usually to reset things)
void post() { _hlw8012->toggleMode(); }
#endif // HLW8012_USE_INTERRUPTS == 0
// Handle interrupt calls
void ICACHE_RAM_ATTR handleInterrupt(unsigned char gpio) {
if (gpio == _cf) _hlw8012->cf_interrupt();
if (gpio == _cf1) _hlw8012->cf1_interrupt();
}
protected:
// ---------------------------------------------------------------------
// Interrupt management
// ---------------------------------------------------------------------
void _attach(HLW8012Sensor * instance, unsigned char gpio, unsigned char mode);
void _detach(unsigned char gpio);
void _enableInterrupts(bool value) {
static unsigned char _interrupt_cf = GPIO_NONE;
static unsigned char _interrupt_cf1 = GPIO_NONE;
if (value) {
if (_interrupt_cf != _cf) {
if (_interrupt_cf != GPIO_NONE) _detach(_interrupt_cf);
_attach(this, _cf, HLW8012_INTERRUPT_ON);
_interrupt_cf = _cf;
}
if (_interrupt_cf1 != _cf1) {
if (_interrupt_cf1 != GPIO_NONE) _detach(_interrupt_cf1);
_attach(this, _cf1, HLW8012_INTERRUPT_ON);
_interrupt_cf1 = _cf1;
}
} else {
if (GPIO_NONE != _interrupt_cf) {
_detach(_interrupt_cf);
_interrupt_cf = GPIO_NONE;
}
if (GPIO_NONE != _interrupt_cf1) {
_detach(_interrupt_cf1);
_interrupt_cf1 = GPIO_NONE;
}
}
}
// ---------------------------------------------------------------------
unsigned char _sel = GPIO_NONE;
unsigned char _cf = GPIO_NONE;
unsigned char _cf1 = GPIO_NONE;
bool _sel_current = true;
double _energy_offset = 0;
HLW8012 * _hlw8012 = NULL;
};
// -----------------------------------------------------------------------------
// Interrupt helpers
// -----------------------------------------------------------------------------
HLW8012Sensor * _hlw8012_sensor_instance[10] = {NULL};
void ICACHE_RAM_ATTR _hlw8012_sensor_isr(unsigned char gpio) {
unsigned char index = gpio > 5 ? gpio-6 : gpio;
if (_hlw8012_sensor_instance[index]) {
_hlw8012_sensor_instance[index]->handleInterrupt(gpio);
}
}
void ICACHE_RAM_ATTR _hlw8012_sensor_isr_0() { _hlw8012_sensor_isr(0); }
void ICACHE_RAM_ATTR _hlw8012_sensor_isr_1() { _hlw8012_sensor_isr(1); }
void ICACHE_RAM_ATTR _hlw8012_sensor_isr_2() { _hlw8012_sensor_isr(2); }
void ICACHE_RAM_ATTR _hlw8012_sensor_isr_3() { _hlw8012_sensor_isr(3); }
void ICACHE_RAM_ATTR _hlw8012_sensor_isr_4() { _hlw8012_sensor_isr(4); }
void ICACHE_RAM_ATTR _hlw8012_sensor_isr_5() { _hlw8012_sensor_isr(5); }
void ICACHE_RAM_ATTR _hlw8012_sensor_isr_12() { _hlw8012_sensor_isr(12); }
void ICACHE_RAM_ATTR _hlw8012_sensor_isr_13() { _hlw8012_sensor_isr(13); }
void ICACHE_RAM_ATTR _hlw8012_sensor_isr_14() { _hlw8012_sensor_isr(14); }
void ICACHE_RAM_ATTR _hlw8012_sensor_isr_15() { _hlw8012_sensor_isr(15); }
static void (*_hlw8012_sensor_isr_list[10])() = {
_hlw8012_sensor_isr_0, _hlw8012_sensor_isr_1, _hlw8012_sensor_isr_2,
_hlw8012_sensor_isr_3, _hlw8012_sensor_isr_4, _hlw8012_sensor_isr_5,
_hlw8012_sensor_isr_12, _hlw8012_sensor_isr_13, _hlw8012_sensor_isr_14,
_hlw8012_sensor_isr_15
};
void HLW8012Sensor::_attach(HLW8012Sensor * instance, unsigned char gpio, unsigned char mode) {
if (!gpioValid(gpio)) return;
_detach(gpio);
unsigned char index = gpio > 5 ? gpio-6 : gpio;
_hlw8012_sensor_instance[index] = instance;
attachInterrupt(gpio, _hlw8012_sensor_isr_list[index], mode);
#if SENSOR_DEBUG
DEBUG_MSG_P(PSTR("[SENSOR] GPIO%u interrupt attached to %s\n"), gpio, instance->description().c_str());
#endif
}
void HLW8012Sensor::_detach(unsigned char gpio) {
if (!gpioValid(gpio)) return;
unsigned char index = gpio > 5 ? gpio-6 : gpio;
if (_hlw8012_sensor_instance[index]) {
detachInterrupt(gpio);
#if SENSOR_DEBUG
DEBUG_MSG_P(PSTR("[SENSOR] GPIO%u interrupt detached from %s\n"), gpio, _hlw8012_sensor_instance[index]->description().c_str());
#endif
_hlw8012_sensor_instance[index] = NULL;
}
}
#endif // SENSOR_SUPPORT && HLW8012_SUPPORT