mh
/
mhsw-espurna
1
0
Fork 0
Code Releases 0 Activity
Fork of the espurna firmware for `mhsw` switches
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
2894 Commits
18 Branches
212 MiB
 
 
 
 
 
 
Tree: e7fc5f337b
Branches Tags
${ item.name }
Create branch ${ searchTerm }
from 'e7fc5f337b'
${ noResults }
mhsw-espurna/code/espurna/sensor.ino

1880 lines
61 KiB
Raw Blame History

/*
SENSOR MODULE
Copyright (C) 2016-2019 by Xose Pérez <xose dot perez at gmail dot com>
*/
#if SENSOR_SUPPORT
#include "relay.h"
#include "broker.h"
#include <vector>
#include "filters/LastFilter.h"
#include "filters/MaxFilter.h"
#include "filters/MedianFilter.h"
#include "filters/MovingAverageFilter.h"
#include "sensors/BaseSensor.h"
#include <float.h>
struct sensor_magnitude_t {
BaseSensor * sensor; // Sensor object
BaseFilter * filter; // Filter object
unsigned char local; // Local index in its provider
unsigned char type; // Type of measurement
unsigned char decimals; // Number of decimals in textual representation
unsigned char global; // Global index in its type
double last; // Last raw value from sensor (unfiltered)
double reported; // Last reported value
double min_change; // Minimum value change to report
double max_change; // Maximum value change to report
};
std::vector<BaseSensor *> _sensors;
std::vector<sensor_magnitude_t> _magnitudes;
bool _sensors_ready = false;
unsigned char _counts[MAGNITUDE_MAX];
bool _sensor_realtime = API_REAL_TIME_VALUES;
unsigned long _sensor_read_interval = 1000 * SENSOR_READ_INTERVAL;
unsigned char _sensor_report_every = SENSOR_REPORT_EVERY;
unsigned char _sensor_save_every = SENSOR_SAVE_EVERY;
unsigned char _sensor_power_units = SENSOR_POWER_UNITS;
unsigned char _sensor_energy_units = SENSOR_ENERGY_UNITS;
unsigned char _sensor_temperature_units = SENSOR_TEMPERATURE_UNITS;
double _sensor_temperature_correction = SENSOR_TEMPERATURE_CORRECTION;
double _sensor_humidity_correction = SENSOR_HUMIDITY_CORRECTION;
double _sensor_lux_correction = SENSOR_LUX_CORRECTION;
#if PZEM004T_SUPPORT
PZEM004TSensor *pzem004t_sensor;
#endif
String _sensor_energy_reset_ts = String();
// -----------------------------------------------------------------------------
// Private
// -----------------------------------------------------------------------------
unsigned char _magnitudeDecimals(unsigned char type) {
// Hardcoded decimals (these should be linked to the unit, instead of the magnitude)
if (type == MAGNITUDE_ANALOG) return ANALOG_DECIMALS;
if (type == MAGNITUDE_ENERGY ||
type == MAGNITUDE_ENERGY_DELTA) {
_sensor_energy_units = getSetting("eneUnits", SENSOR_ENERGY_UNITS).toInt();
if (_sensor_energy_units == ENERGY_KWH) return 3;
}
if (type == MAGNITUDE_POWER_ACTIVE ||
type == MAGNITUDE_POWER_APPARENT ||
type == MAGNITUDE_POWER_REACTIVE) {
if (_sensor_power_units == POWER_KILOWATTS) return 3;
}
if (type < MAGNITUDE_MAX) return pgm_read_byte(magnitude_decimals + type);
return 0;
}
double _magnitudeProcess(unsigned char type, unsigned char decimals, double value) {
// Hardcoded conversions (these should be linked to the unit, instead of the magnitude)
if (type == MAGNITUDE_TEMPERATURE) {
if (_sensor_temperature_units == TMP_FAHRENHEIT) value = value * 1.8 + 32;
value = value + _sensor_temperature_correction;
}
if (type == MAGNITUDE_HUMIDITY) {
value = constrain(value + _sensor_humidity_correction, 0, 100);
}
if (type == MAGNITUDE_LUX) {
value = value + _sensor_lux_correction;
}
if (type == MAGNITUDE_ENERGY ||
type == MAGNITUDE_ENERGY_DELTA) {
if (_sensor_energy_units == ENERGY_KWH) value = value / 3600000;
}
if (type == MAGNITUDE_POWER_ACTIVE ||
type == MAGNITUDE_POWER_APPARENT ||
type == MAGNITUDE_POWER_REACTIVE) {
if (_sensor_power_units == POWER_KILOWATTS) value = value / 1000;
}
return roundTo(value, decimals);
}
// -----------------------------------------------------------------------------
#if WEB_SUPPORT
//void _sensorWebSocketMagnitudes(JsonObject& root, const String& ws_name, const String& conf_name) {
template<typename T> void _sensorWebSocketMagnitudes(JsonObject& root, T prefix) {
// ws produces flat list <prefix>Magnitudes
const String ws_name = String(prefix) + "Magnitudes";
// config uses <prefix>Magnitude<index> (cut 's')
const String conf_name = ws_name.substring(0, ws_name.length() - 1);
JsonObject& list = root.createNestedObject(ws_name);
list["size"] = magnitudeCount();
//JsonArray& name = list.createNestedArray("name");
JsonArray& type = list.createNestedArray("type");
JsonArray& index = list.createNestedArray("index");
JsonArray& idx = list.createNestedArray("idx");
for (unsigned char i=0; i<magnitudeCount(); ++i) {
//name.add(magnitudeName(i));
type.add(magnitudeType(i));
index.add(magnitudeIndex(i));
idx.add(getSetting(conf_name, i, 0).toInt());
}
}
/*
template<typename T> void _sensorWebSocketMagnitudes(JsonObject& root, T prefix) {
// ws produces flat list <prefix>Magnitudes
const String ws_name = String(prefix) + "Magnitudes";
// config uses <prefix>Magnitude<index> (cut 's')
const String conf_name = ws_name.substring(0, ws_name.length() - 1);
_sensorWebSocketMagnitudes(root, ws_name, conf_name);
}
*/
bool _sensorWebSocketOnKeyCheck(const char * key, JsonVariant& value) {
if (strncmp(key, "pwr", 3) == 0) return true;
if (strncmp(key, "sns", 3) == 0) return true;
if (strncmp(key, "tmp", 3) == 0) return true;
if (strncmp(key, "hum", 3) == 0) return true;
if (strncmp(key, "ene", 3) == 0) return true;
if (strncmp(key, "lux", 3) == 0) return true;
return false;
}
void _sensorWebSocketOnVisible(JsonObject& root) {
root["snsVisible"] = 1;
for (auto& magnitude : _magnitudes) {
if (magnitude.type == MAGNITUDE_TEMPERATURE) root["temperatureVisible"] = 1;
if (magnitude.type == MAGNITUDE_HUMIDITY) root["humidityVisible"] = 1;
#if MICS2710_SUPPORT || MICS5525_SUPPORT
if (magnitude.type == MAGNITUDE_CO || magnitude.type == MAGNITUDE_NO2) root["micsVisible"] = 1;
#endif
}
}
void _sensorWebSocketMagnitudesConfig(JsonObject& root) {
JsonObject& magnitudes = root.createNestedObject("magnitudesConfig");
uint8_t size = 0;
JsonArray& index = magnitudes.createNestedArray("index");
JsonArray& type = magnitudes.createNestedArray("type");
JsonArray& units = magnitudes.createNestedArray("units");
JsonArray& description = magnitudes.createNestedArray("description");
for (unsigned char i=0; i<magnitudeCount(); i++) {
sensor_magnitude_t magnitude = _magnitudes[i];
if (magnitude.type == MAGNITUDE_EVENT) continue;
++size;
index.add<uint8_t>(magnitude.global);
type.add<uint8_t>(magnitude.type);
units.add(magnitudeUnits(magnitude.type));
if (magnitude.type == MAGNITUDE_ENERGY) {
if (_sensor_energy_reset_ts.length() == 0) _sensorResetTS();
description.add(magnitude.sensor->slot(magnitude.local) + String(" (since ") + _sensor_energy_reset_ts + String(")"));
} else {
description.add(magnitude.sensor->slot(magnitude.local));
}
}
magnitudes["size"] = size;
}
void _sensorWebSocketSendData(JsonObject& root) {
char buffer[64];
JsonObject& magnitudes = root.createNestedObject("magnitudes");
uint8_t size = 0;
JsonArray& value = magnitudes.createNestedArray("value");
JsonArray& error = magnitudes.createNestedArray("error");
for (unsigned char i=0; i<magnitudeCount(); i++) {
sensor_magnitude_t magnitude = _magnitudes[i];
if (magnitude.type == MAGNITUDE_EVENT) continue;
++size;
double value_show = _magnitudeProcess(magnitude.type, magnitude.decimals, magnitude.last);
dtostrf(value_show, 1, magnitude.decimals, buffer);
value.add(buffer);
error.add(magnitude.sensor->error());
}
magnitudes["size"] = size;
}
void _sensorWebSocketOnConnected(JsonObject& root) {
for (unsigned char i=0; i<_sensors.size(); i++) {
BaseSensor * sensor = _sensors[i];
UNUSED(sensor);
#if EMON_ANALOG_SUPPORT
if (sensor->getID() == SENSOR_EMON_ANALOG_ID) {
root["emonVisible"] = 1;
root["pwrVisible"] = 1;
root["pwrVoltage"] = ((EmonAnalogSensor *) sensor)->getVoltage();
}
#endif
#if HLW8012_SUPPORT
if (sensor->getID() == SENSOR_HLW8012_ID) {
root["hlwVisible"] = 1;
root["pwrVisible"] = 1;
}
#endif
#if CSE7766_SUPPORT
if (sensor->getID() == SENSOR_CSE7766_ID) {
root["cseVisible"] = 1;
root["pwrVisible"] = 1;
}
#endif
#if V9261F_SUPPORT
if (sensor->getID() == SENSOR_V9261F_ID) {
root["pwrVisible"] = 1;
}
#endif
#if ECH1560_SUPPORT
if (sensor->getID() == SENSOR_ECH1560_ID) {
root["pwrVisible"] = 1;
}
#endif
#if PZEM004T_SUPPORT
if (sensor->getID() == SENSOR_PZEM004T_ID) {
root["pzemVisible"] = 1;
root["pwrVisible"] = 1;
}
#endif
#if PULSEMETER_SUPPORT
if (sensor->getID() == SENSOR_PULSEMETER_ID) {
root["pmVisible"] = 1;
root["pwrRatioE"] = ((PulseMeterSensor *) sensor)->getEnergyRatio();
}
#endif
}
if (magnitudeCount()) {
//root["apiRealTime"] = _sensor_realtime;
root["pwrUnits"] = _sensor_power_units;
root["eneUnits"] = _sensor_energy_units;
root["tmpUnits"] = _sensor_temperature_units;
root["tmpCorrection"] = _sensor_temperature_correction;
root["humCorrection"] = _sensor_humidity_correction;
root["snsRead"] = _sensor_read_interval / 1000;
root["snsReport"] = _sensor_report_every;
root["snsSave"] = _sensor_save_every;
_sensorWebSocketMagnitudesConfig(root);
}
/*
// Sensors manifest
JsonArray& manifest = root.createNestedArray("manifest");
#if BMX280_SUPPORT
BMX280Sensor::manifest(manifest);
#endif
// Sensors configuration
JsonArray& sensors = root.createNestedArray("sensors");
for (unsigned char i; i<_sensors.size(); i++) {
JsonObject& sensor = sensors.createNestedObject();
sensor["index"] = i;
sensor["id"] = _sensors[i]->getID();
_sensors[i]->getConfig(sensor);
}
*/
}
#endif // WEB_SUPPORT
#if API_SUPPORT
void _sensorAPISetup() {
for (unsigned char magnitude_id=0; magnitude_id<_magnitudes.size(); magnitude_id++) {
sensor_magnitude_t magnitude = _magnitudes[magnitude_id];
String topic = magnitudeTopic(magnitude.type);
if (SENSOR_USE_INDEX || (_counts[magnitude.type] > 1)) topic = topic + "/" + String(magnitude.global);
apiRegister(topic.c_str(), [magnitude_id](char * buffer, size_t len) {
sensor_magnitude_t magnitude = _magnitudes[magnitude_id];
double value = _sensor_realtime ? magnitude.last : magnitude.reported;
dtostrf(value, 1, magnitude.decimals, buffer);
});
}
}
#endif // API_SUPPORT
#if TERMINAL_SUPPORT
void _sensorInitCommands() {
terminalRegisterCommand(F("MAGNITUDES"), [](Embedis* e) {
for (unsigned char i=0; i<_magnitudes.size(); i++) {
sensor_magnitude_t magnitude = _magnitudes[i];
DEBUG_MSG_P(PSTR("[SENSOR] * %2d: %s @ %s (%s/%d)\n"),
i,
magnitudeTopic(magnitude.type).c_str(),
magnitude.sensor->slot(magnitude.local).c_str(),
magnitudeTopic(magnitude.type).c_str(),
magnitude.global
);
}
terminalOK();
});
#if PZEM004T_SUPPORT
terminalRegisterCommand(F("PZ.ADDRESS"), [](Embedis* e) {
if (e->argc == 1) {
DEBUG_MSG_P(PSTR("[SENSOR] PZEM004T\n"));
unsigned char dev_count = pzem004t_sensor->getAddressesCount();
for(unsigned char dev = 0; dev < dev_count; dev++) {
DEBUG_MSG_P(PSTR("Device %d/%s\n"), dev, pzem004t_sensor->getAddress(dev).c_str());
}
terminalOK();
} else if(e->argc == 2) {
IPAddress addr;
if (addr.fromString(String(e->argv[1]))) {
if(pzem004t_sensor->setDeviceAddress(&addr)) {
terminalOK();
}
} else {
terminalError(F("Invalid address argument"));
}
} else {
terminalError(F("Wrong arguments"));
}
});
terminalRegisterCommand(F("PZ.RESET"), [](Embedis* e) {
if(e->argc > 2) {
terminalError(F("Wrong arguments"));
} else {
unsigned char init = e->argc == 2 ? String(e->argv[1]).toInt() : 0;
unsigned char limit = e->argc == 2 ? init +1 : pzem004t_sensor->getAddressesCount();
DEBUG_MSG_P(PSTR("[SENSOR] PZEM004T\n"));
for(unsigned char dev = init; dev < limit; dev++) {
float offset = pzem004t_sensor->resetEnergy(dev);
_sensorEnergyTotal(dev, offset);
DEBUG_MSG_P(PSTR("Device %d/%s - Offset: %s\n"), dev, pzem004t_sensor->getAddress(dev).c_str(), String(offset).c_str());
}
terminalOK();
}
});
terminalRegisterCommand(F("PZ.VALUE"), [](Embedis* e) {
if(e->argc > 2) {
terminalError(F("Wrong arguments"));
} else {
unsigned char init = e->argc == 2 ? String(e->argv[1]).toInt() : 0;
unsigned char limit = e->argc == 2 ? init +1 : pzem004t_sensor->getAddressesCount();
DEBUG_MSG_P(PSTR("[SENSOR] PZEM004T\n"));
for(unsigned char dev = init; dev < limit; dev++) {
DEBUG_MSG_P(PSTR("Device %d/%s - Current: %s Voltage: %s Power: %s Energy: %s\n"), //
dev,
pzem004t_sensor->getAddress(dev).c_str(),
String(pzem004t_sensor->value(dev * PZ_MAGNITUDE_CURRENT_INDEX)).c_str(),
String(pzem004t_sensor->value(dev * PZ_MAGNITUDE_VOLTAGE_INDEX)).c_str(),
String(pzem004t_sensor->value(dev * PZ_MAGNITUDE_POWER_ACTIVE_INDEX)).c_str(),
String(pzem004t_sensor->value(dev * PZ_MAGNITUDE_ENERGY_INDEX)).c_str());
}
terminalOK();
}
});
#endif
}
#endif
void _sensorTick() {
for (unsigned char i=0; i<_sensors.size(); i++) {
_sensors[i]->tick();
}
}
void _sensorPre() {
for (unsigned char i=0; i<_sensors.size(); i++) {
_sensors[i]->pre();
if (!_sensors[i]->status()) {
DEBUG_MSG_P(PSTR("[SENSOR] Error reading data from %s (error: %d)\n"),
_sensors[i]->description().c_str(),
_sensors[i]->error()
);
}
}
}
void _sensorPost() {
for (unsigned char i=0; i<_sensors.size(); i++) {
_sensors[i]->post();
}
}
void _sensorResetTS() {
#if NTP_SUPPORT
if (ntpSynced()) {
if (_sensor_energy_reset_ts.length() == 0) {
_sensor_energy_reset_ts = ntpDateTime(now() - millis() / 1000);
} else {
_sensor_energy_reset_ts = ntpDateTime(now());
}
} else {
_sensor_energy_reset_ts = String();
}
setSetting("snsResetTS", _sensor_energy_reset_ts);
#endif
}
double _sensorEnergyTotal(unsigned int index) {
double value = 0;
if (rtcmemStatus() && (index < (sizeof(Rtcmem->energy) / sizeof(*Rtcmem->energy)))) {
value = Rtcmem->energy[index];
} else {
value = (_sensor_save_every > 0) ? getSetting("eneTotal", index, 0).toInt() : 0;
}
return value;
}
double _sensorEnergyTotal() {
return _sensorEnergyTotal(0);
}
void _sensorEnergyTotal(unsigned int index, double value) {
static unsigned long save_count = 0;
// Save to EEPROM every '_sensor_save_every' readings
if (_sensor_save_every > 0) {
save_count = (save_count + 1) % _sensor_save_every;
if (0 == save_count) {
setSetting("eneTotal", index, value);
saveSettings();
}
}
// Always save to RTCMEM
if (index < (sizeof(Rtcmem->energy) / sizeof(*Rtcmem->energy))) {
Rtcmem->energy[index] = value;
}
}
// -----------------------------------------------------------------------------
// Sensor initialization
// -----------------------------------------------------------------------------
void _sensorLoad() {
/*
This is temporal, in the future sensors will be initialized based on
soft configuration (data stored in EEPROM config) so you will be able
to define and configure new sensors on the fly
At the time being, only enabled sensors (those with *_SUPPORT to 1) are being
loaded and initialized here. If you want to add new sensors of the same type
just duplicate the block and change the arguments for the set* methods.
Check the DHT block below for an example
*/
#if AM2320_SUPPORT
{
AM2320Sensor * sensor = new AM2320Sensor();
sensor->setAddress(AM2320_ADDRESS);
_sensors.push_back(sensor);
}
#endif
#if ANALOG_SUPPORT
{
AnalogSensor * sensor = new AnalogSensor();
sensor->setSamples(ANALOG_SAMPLES);
sensor->setDelay(ANALOG_DELAY);
//CICM For analog scaling
sensor->setFactor(ANALOG_FACTOR);
sensor->setOffset(ANALOG_OFFSET);
_sensors.push_back(sensor);
}
#endif
#if BH1750_SUPPORT
{
BH1750Sensor * sensor = new BH1750Sensor();
sensor->setAddress(BH1750_ADDRESS);
sensor->setMode(BH1750_MODE);
_sensors.push_back(sensor);
}
#endif
#if BMP180_SUPPORT
{
BMP180Sensor * sensor = new BMP180Sensor();
sensor->setAddress(BMP180_ADDRESS);
_sensors.push_back(sensor);
}
#endif
#if BMX280_SUPPORT
{
// Support up to two sensors with full auto-discovery.
const unsigned char number = constrain(getSetting("bmx280Number", BMX280_NUMBER).toInt(), 1, 2);
// For second sensor, if BMX280_ADDRESS is 0x00 then auto-discover
// otherwise choose the other unnamed sensor address
const unsigned char first = getSetting("bmx280Address", BMX280_ADDRESS).toInt();
const unsigned char second = (first == 0x00) ? 0x00 : (0x76 + 0x77 - first);
const unsigned char address_map[2] = { first, second };
for (unsigned char n=0; n < number; ++n) {
BMX280Sensor * sensor = new BMX280Sensor();
sensor->setAddress(address_map[n]);
_sensors.push_back(sensor);
}
}
#endif
#if CSE7766_SUPPORT
{
CSE7766Sensor * sensor = new CSE7766Sensor();
sensor->setRX(CSE7766_PIN);
_sensors.push_back(sensor);
}
#endif
#if DALLAS_SUPPORT
{
DallasSensor * sensor = new DallasSensor();
sensor->setGPIO(DALLAS_PIN);
_sensors.push_back(sensor);
}
#endif
#if DHT_SUPPORT
{
DHTSensor * sensor = new DHTSensor();
sensor->setGPIO(DHT_PIN);
sensor->setType(DHT_TYPE);
_sensors.push_back(sensor);
}
#endif
/*
// Example on how to add a second DHT sensor
// DHT2_PIN and DHT2_TYPE should be defined in sensors.h file
#if DHT_SUPPORT
{
DHTSensor * sensor = new DHTSensor();
sensor->setGPIO(DHT2_PIN);
sensor->setType(DHT2_TYPE);
_sensors.push_back(sensor);
}
#endif
*/
#if DIGITAL_SUPPORT
{
#if (DIGITAL1_PIN != GPIO_NONE)
{
DigitalSensor * sensor = new DigitalSensor();
sensor->setGPIO(DIGITAL1_PIN);
sensor->setMode(DIGITAL1_PIN_MODE);
sensor->setDefault(DIGITAL1_DEFAULT_STATE);
_sensors.push_back(sensor);
}
#endif
#if (DIGITAL2_PIN != GPIO_NONE)
{
DigitalSensor * sensor = new DigitalSensor();
sensor->setGPIO(DIGITAL2_PIN);
sensor->setMode(DIGITAL2_PIN_MODE);
sensor->setDefault(DIGITAL2_DEFAULT_STATE);
_sensors.push_back(sensor);
}
#endif
#if (DIGITAL3_PIN != GPIO_NONE)
{
DigitalSensor * sensor = new DigitalSensor();
sensor->setGPIO(DIGITAL3_PIN);
sensor->setMode(DIGITAL3_PIN_MODE);
sensor->setDefault(DIGITAL3_DEFAULT_STATE);
_sensors.push_back(sensor);
}
#endif
#if (DIGITAL4_PIN != GPIO_NONE)
{
DigitalSensor * sensor = new DigitalSensor();
sensor->setGPIO(DIGITAL4_PIN);
sensor->setMode(DIGITAL4_PIN_MODE);
sensor->setDefault(DIGITAL4_DEFAULT_STATE);
_sensors.push_back(sensor);
}
#endif
#if (DIGITAL5_PIN != GPIO_NONE)
{
DigitalSensor * sensor = new DigitalSensor();
sensor->setGPIO(DIGITAL5_PIN);
sensor->setMode(DIGITAL5_PIN_MODE);
sensor->setDefault(DIGITAL5_DEFAULT_STATE);
_sensors.push_back(sensor);
}
#endif
#if (DIGITAL6_PIN != GPIO_NONE)
{
DigitalSensor * sensor = new DigitalSensor();
sensor->setGPIO(DIGITAL6_PIN);
sensor->setMode(DIGITAL6_PIN_MODE);
sensor->setDefault(DIGITAL6_DEFAULT_STATE);
_sensors.push_back(sensor);
}
#endif
#if (DIGITAL7_PIN != GPIO_NONE)
{
DigitalSensor * sensor = new DigitalSensor();
sensor->setGPIO(DIGITAL7_PIN);
sensor->setMode(DIGITAL7_PIN_MODE);
sensor->setDefault(DIGITAL7_DEFAULT_STATE);
_sensors.push_back(sensor);
}
#endif
#if (DIGITAL8_PIN != GPIO_NONE)
{
DigitalSensor * sensor = new DigitalSensor();
sensor->setGPIO(DIGITAL8_PIN);
sensor->setMode(DIGITAL8_PIN_MODE);
sensor->setDefault(DIGITAL8_DEFAULT_STATE);
_sensors.push_back(sensor);
}
#endif
}
#endif
#if ECH1560_SUPPORT
{
ECH1560Sensor * sensor = new ECH1560Sensor();
sensor->setCLK(ECH1560_CLK_PIN);
sensor->setMISO(ECH1560_MISO_PIN);
sensor->setInverted(ECH1560_INVERTED);
_sensors.push_back(sensor);
}
#endif
#if EMON_ADC121_SUPPORT
{
EmonADC121Sensor * sensor = new EmonADC121Sensor();
sensor->setAddress(EMON_ADC121_I2C_ADDRESS);
sensor->setVoltage(EMON_MAINS_VOLTAGE);
sensor->setReference(EMON_REFERENCE_VOLTAGE);
sensor->setCurrentRatio(0, EMON_CURRENT_RATIO);
_sensors.push_back(sensor);
}
#endif
#if EMON_ADS1X15_SUPPORT
{
EmonADS1X15Sensor * sensor = new EmonADS1X15Sensor();
sensor->setAddress(EMON_ADS1X15_I2C_ADDRESS);
sensor->setType(EMON_ADS1X15_TYPE);
sensor->setMask(EMON_ADS1X15_MASK);
sensor->setGain(EMON_ADS1X15_GAIN);
sensor->setVoltage(EMON_MAINS_VOLTAGE);
sensor->setCurrentRatio(0, EMON_CURRENT_RATIO);
sensor->setCurrentRatio(1, EMON_CURRENT_RATIO);
sensor->setCurrentRatio(2, EMON_CURRENT_RATIO);
sensor->setCurrentRatio(3, EMON_CURRENT_RATIO);
_sensors.push_back(sensor);
}
#endif
#if EMON_ANALOG_SUPPORT
{
EmonAnalogSensor * sensor = new EmonAnalogSensor();
sensor->setVoltage(EMON_MAINS_VOLTAGE);
sensor->setReference(EMON_REFERENCE_VOLTAGE);
sensor->setCurrentRatio(0, EMON_CURRENT_RATIO);
_sensors.push_back(sensor);
}
#endif
#if EVENTS_SUPPORT
{
#if (EVENTS1_PIN != GPIO_NONE)
{
EventSensor * sensor = new EventSensor();
sensor->setGPIO(EVENTS1_PIN);
sensor->setTrigger(EVENTS1_TRIGGER);
sensor->setPinMode(EVENTS1_PIN_MODE);
sensor->setDebounceTime(EVENTS1_DEBOUNCE);
sensor->setInterruptMode(EVENTS1_INTERRUPT_MODE);
_sensors.push_back(sensor);
}
#endif
#if (EVENTS2_PIN != GPIO_NONE)
{
EventSensor * sensor = new EventSensor();
sensor->setGPIO(EVENTS2_PIN);
sensor->setTrigger(EVENTS2_TRIGGER);
sensor->setPinMode(EVENTS2_PIN_MODE);
sensor->setDebounceTime(EVENTS2_DEBOUNCE);
sensor->setInterruptMode(EVENTS2_INTERRUPT_MODE);
_sensors.push_back(sensor);
}
#endif
#if (EVENTS3_PIN != GPIO_NONE)
{
EventSensor * sensor = new EventSensor();
sensor->setGPIO(EVENTS3_PIN);
sensor->setTrigger(EVENTS3_TRIGGER);
sensor->setPinMode(EVENTS3_PIN_MODE);
sensor->setDebounceTime(EVENTS3_DEBOUNCE);
sensor->setInterruptMode(EVENTS3_INTERRUPT_MODE);
_sensors.push_back(sensor);
}
#endif
#if (EVENTS4_PIN != GPIO_NONE)
{
EventSensor * sensor = new EventSensor();
sensor->setGPIO(EVENTS4_PIN);
sensor->setTrigger(EVENTS4_TRIGGER);
sensor->setPinMode(EVENTS4_PIN_MODE);
sensor->setDebounceTime(EVENTS4_DEBOUNCE);
sensor->setInterruptMode(EVENTS4_INTERRUPT_MODE);
_sensors.push_back(sensor);
}
#endif
#if (EVENTS5_PIN != GPIO_NONE)
{
EventSensor * sensor = new EventSensor();
sensor->setGPIO(EVENTS5_PIN);
sensor->setTrigger(EVENTS5_TRIGGER);
sensor->setPinMode(EVENTS5_PIN_MODE);
sensor->setDebounceTime(EVENTS5_DEBOUNCE);
sensor->setInterruptMode(EVENTS5_INTERRUPT_MODE);
_sensors.push_back(sensor);
}
#endif
#if (EVENTS6_PIN != GPIO_NONE)
{
EventSensor * sensor = new EventSensor();
sensor->setGPIO(EVENTS6_PIN);
sensor->setTrigger(EVENTS6_TRIGGER);
sensor->setPinMode(EVENTS6_PIN_MODE);
sensor->setDebounceTime(EVENTS6_DEBOUNCE);
sensor->setInterruptMode(EVENTS6_INTERRUPT_MODE);
_sensors.push_back(sensor);
}
#endif
#if (EVENTS7_PIN != GPIO_NONE)
{
EventSensor * sensor = new EventSensor();
sensor->setGPIO(EVENTS7_PIN);
sensor->setTrigger(EVENTS7_TRIGGER);
sensor->setPinMode(EVENTS7_PIN_MODE);
sensor->setDebounceTime(EVENTS7_DEBOUNCE);
sensor->setInterruptMode(EVENTS7_INTERRUPT_MODE);
_sensors.push_back(sensor);
}
#endif
#if (EVENTS8_PIN != GPIO_NONE)
{
EventSensor * sensor = new EventSensor();
sensor->setGPIO(EVENTS8_PIN);
sensor->setTrigger(EVENTS8_TRIGGER);
sensor->setPinMode(EVENTS8_PIN_MODE);
sensor->setDebounceTime(EVENTS8_DEBOUNCE);
sensor->setInterruptMode(EVENTS8_INTERRUPT_MODE);
_sensors.push_back(sensor);
}
#endif
}
#endif
#if GEIGER_SUPPORT
{
GeigerSensor * sensor = new GeigerSensor(); // Create instance of thr Geiger module.
sensor->setGPIO(GEIGER_PIN); // Interrupt pin of the attached geiger counter board.
sensor->setMode(GEIGER_PIN_MODE); // This pin is an input.
sensor->setDebounceTime(GEIGER_DEBOUNCE); // Debounce time 25ms, because https://github.com/Trickx/espurna/wiki/Geiger-counter
sensor->setInterruptMode(GEIGER_INTERRUPT_MODE); // Interrupt triggering: edge detection rising.
sensor->setCPM2SievertFactor(GEIGER_CPM2SIEVERT); // Conversion factor from counts per minute to µSv/h
_sensors.push_back(sensor);
}
#endif
#if GUVAS12SD_SUPPORT
{
GUVAS12SDSensor * sensor = new GUVAS12SDSensor();
sensor->setGPIO(GUVAS12SD_PIN);
_sensors.push_back(sensor);
}
#endif
#if SONAR_SUPPORT
{
SonarSensor * sensor = new SonarSensor();
sensor->setEcho(SONAR_ECHO);
sensor->setIterations(SONAR_ITERATIONS);
sensor->setMaxDistance(SONAR_MAX_DISTANCE);
sensor->setTrigger(SONAR_TRIGGER);
_sensors.push_back(sensor);
}
#endif
#if HLW8012_SUPPORT
{
HLW8012Sensor * sensor = new HLW8012Sensor();
sensor->setSEL(HLW8012_SEL_PIN);
sensor->setCF(HLW8012_CF_PIN);
sensor->setCF1(HLW8012_CF1_PIN);
sensor->setSELCurrent(HLW8012_SEL_CURRENT);
_sensors.push_back(sensor);
}
#endif
#if LDR_SUPPORT
{
LDRSensor * sensor = new LDRSensor();
sensor->setSamples(LDR_SAMPLES);
sensor->setDelay(LDR_DELAY);
sensor->setType(LDR_TYPE);
sensor->setPhotocellPositionOnGround(LDR_ON_GROUND);
sensor->setResistor(LDR_RESISTOR);
sensor->setPhotocellParameters(LDR_MULTIPLICATION, LDR_POWER);
_sensors.push_back(sensor);
}
#endif
#if MHZ19_SUPPORT
{
MHZ19Sensor * sensor = new MHZ19Sensor();
sensor->setRX(MHZ19_RX_PIN);
sensor->setTX(MHZ19_TX_PIN);
if (getSetting("mhz19CalibrateAuto", 0).toInt() == 1)
sensor->setCalibrateAuto(true);
_sensors.push_back(sensor);
}
#endif
#if MICS2710_SUPPORT
{
MICS2710Sensor * sensor = new MICS2710Sensor();
sensor->setAnalogGPIO(MICS2710_NOX_PIN);
sensor->setPreHeatGPIO(MICS2710_PRE_PIN);
sensor->setRL(MICS2710_RL);
_sensors.push_back(sensor);
}
#endif
#if MICS5525_SUPPORT
{
MICS5525Sensor * sensor = new MICS5525Sensor();
sensor->setAnalogGPIO(MICS5525_RED_PIN);
sensor->setRL(MICS5525_RL);
_sensors.push_back(sensor);
}
#endif
#if NTC_SUPPORT
{
NTCSensor * sensor = new NTCSensor();
sensor->setSamples(NTC_SAMPLES);
sensor->setDelay(NTC_DELAY);
sensor->setUpstreamResistor(NTC_R_UP);
sensor->setDownstreamResistor(NTC_R_DOWN);
sensor->setBeta(NTC_BETA);
sensor->setR0(NTC_R0);
sensor->setT0(NTC_T0);
_sensors.push_back(sensor);
}
#endif
#if PMSX003_SUPPORT
{
PMSX003Sensor * sensor = new PMSX003Sensor();
#if PMS_USE_SOFT
sensor->setRX(PMS_RX_PIN);
sensor->setTX(PMS_TX_PIN);
#else
sensor->setSerial(& PMS_HW_PORT);
#endif
sensor->setType(PMS_TYPE);
_sensors.push_back(sensor);
}
#endif
#if PULSEMETER_SUPPORT
{
PulseMeterSensor * sensor = new PulseMeterSensor();
sensor->setGPIO(PULSEMETER_PIN);
sensor->setEnergyRatio(PULSEMETER_ENERGY_RATIO);
sensor->setInterruptMode(PULSEMETER_INTERRUPT_ON);
sensor->setDebounceTime(PULSEMETER_DEBOUNCE);
_sensors.push_back(sensor);
}
#endif
#if PZEM004T_SUPPORT
{
String addresses = getSetting("pzemAddr", PZEM004T_ADDRESSES);
if (!addresses.length()) {
DEBUG_MSG_P(PSTR("[SENSOR] PZEM004T Error: no addresses are configured\n"));
return;
}
PZEM004TSensor * sensor = pzem004t_sensor = new PZEM004TSensor();
sensor->setAddresses(addresses.c_str());
if (getSetting("pzemSoft", PZEM004T_USE_SOFT).toInt() == 1) {
sensor->setRX(getSetting("pzemRX", PZEM004T_RX_PIN).toInt());
sensor->setTX(getSetting("pzemTX", PZEM004T_TX_PIN).toInt());
} else {
sensor->setSerial(& PZEM004T_HW_PORT);
}
// Read saved energy offset
unsigned char dev_count = sensor->getAddressesCount();
for(unsigned char dev = 0; dev < dev_count; dev++) {
float value = _sensorEnergyTotal(dev);
if (value > 0) sensor->resetEnergy(dev, value);
}
_sensors.push_back(sensor);
}
#endif
#if SENSEAIR_SUPPORT
{
SenseAirSensor * sensor = new SenseAirSensor();
sensor->setRX(SENSEAIR_RX_PIN);
sensor->setTX(SENSEAIR_TX_PIN);
_sensors.push_back(sensor);
}
#endif
#if SDS011_SUPPORT
{
SDS011Sensor * sensor = new SDS011Sensor();
sensor->setRX(SDS011_RX_PIN);
sensor->setTX(SDS011_TX_PIN);
_sensors.push_back(sensor);
}
#endif
#if SHT3X_I2C_SUPPORT
{
SHT3XI2CSensor * sensor = new SHT3XI2CSensor();
sensor->setAddress(SHT3X_I2C_ADDRESS);
_sensors.push_back(sensor);
}
#endif
#if SI7021_SUPPORT
{
SI7021Sensor * sensor = new SI7021Sensor();
sensor->setAddress(SI7021_ADDRESS);
_sensors.push_back(sensor);
}
#endif
#if T6613_SUPPORT
{
T6613Sensor * sensor = new T6613Sensor();
sensor->setRX(T6613_RX_PIN);
sensor->setTX(T6613_TX_PIN);
_sensors.push_back(sensor);
}
#endif
#if TMP3X_SUPPORT
{
TMP3XSensor * sensor = new TMP3XSensor();
sensor->setType(TMP3X_TYPE);
_sensors.push_back(sensor);
}
#endif
#if V9261F_SUPPORT
{
V9261FSensor * sensor = new V9261FSensor();
sensor->setRX(V9261F_PIN);
sensor->setInverted(V9261F_PIN_INVERSE);
_sensors.push_back(sensor);
}
#endif
#if MAX6675_SUPPORT
{
MAX6675Sensor * sensor = new MAX6675Sensor();
sensor->setCS(MAX6675_CS_PIN);
sensor->setSO(MAX6675_SO_PIN);
sensor->setSCK(MAX6675_SCK_PIN);
_sensors.push_back(sensor);
}
#endif
#if VEML6075_SUPPORT
{
VEML6075Sensor * sensor = new VEML6075Sensor();
sensor->setIntegrationTime(VEML6075_INTEGRATION_TIME);
sensor->setDynamicMode(VEML6075_DYNAMIC_MODE);
_sensors.push_back(sensor);
}
#endif
#if VL53L1X_SUPPORT
{
VL53L1XSensor * sensor = new VL53L1XSensor();
sensor->setInterMeasurementPeriod(VL53L1X_INTER_MEASUREMENT_PERIOD);
sensor->setDistanceMode(VL53L1X_DISTANCE_MODE);
sensor->setMeasurementTimingBudget(VL53L1X_MEASUREMENT_TIMING_BUDGET);
_sensors.push_back(sensor);
}
#endif
#if EZOPH_SUPPORT
{
EZOPHSensor * sensor = new EZOPHSensor();
sensor->setRX(EZOPH_RX_PIN);
sensor->setTX(EZOPH_TX_PIN);
_sensors.push_back(sensor);
}
#endif
#if ADE7953_SUPPORT
{
ADE7953Sensor * sensor = new ADE7953Sensor();
sensor->setAddress(ADE7953_ADDRESS);
_sensors.push_back(sensor);
}
#endif
}
void _sensorCallback(unsigned char i, unsigned char type, double value) {
DEBUG_MSG_P(PSTR("[SENSOR] Sensor #%u callback, type %u, payload: '%s'\n"), i, type, String(value).c_str());
for (unsigned char k=0; k<_magnitudes.size(); k++) {
if ((_sensors[i] == _magnitudes[k].sensor) && (type == _magnitudes[k].type)) {
_sensorReport(k, value);
return;
}
}
}
void _sensorInit() {
_sensors_ready = true;
_sensor_save_every = getSetting("snsSave", 0).toInt();
for (unsigned char i=0; i<_sensors.size(); i++) {
// Do not process an already initialized sensor
if (_sensors[i]->ready()) continue;
DEBUG_MSG_P(PSTR("[SENSOR] Initializing %s\n"), _sensors[i]->description().c_str());
// Force sensor to reload config
_sensors[i]->begin();
if (!_sensors[i]->ready()) {
if (_sensors[i]->error() != 0) DEBUG_MSG_P(PSTR("[SENSOR] -> ERROR %d\n"), _sensors[i]->error());
_sensors_ready = false;
continue;
}
// Initialize magnitudes
for (unsigned char k=0; k<_sensors[i]->count(); k++) {
unsigned char type = _sensors[i]->type(k);
signed char decimals = _sensors[i]->decimals(type);
if (decimals < 0) decimals = _magnitudeDecimals(type);
sensor_magnitude_t new_magnitude;
new_magnitude.sensor = _sensors[i];
new_magnitude.local = k;
new_magnitude.type = type;
new_magnitude.decimals = (unsigned char) decimals;
new_magnitude.global = _counts[type];
new_magnitude.last = 0;
new_magnitude.reported = 0;
new_magnitude.min_change = 0;
new_magnitude.max_change = 0;
// TODO: find a proper way to extend this to min/max of any magnitude
if (MAGNITUDE_ENERGY == type) {
new_magnitude.max_change = getSetting("eneMaxDelta", ENERGY_MAX_CHANGE).toFloat();
} else if (MAGNITUDE_TEMPERATURE == type) {
new_magnitude.min_change = getSetting("tmpMinDelta", TEMPERATURE_MIN_CHANGE).toFloat();
} else if (MAGNITUDE_HUMIDITY == type) {
new_magnitude.min_change = getSetting("humMinDelta", HUMIDITY_MIN_CHANGE).toFloat();
}
if (MAGNITUDE_ENERGY == type) {
new_magnitude.filter = new LastFilter();
} else if (MAGNITUDE_DIGITAL == type) {
new_magnitude.filter = new MaxFilter();
} else if (MAGNITUDE_COUNT == type || MAGNITUDE_GEIGER_CPM == type || MAGNITUDE_GEIGER_SIEVERT == type) { // For geiger counting moving average filter is the most appropriate if needed at all.
new_magnitude.filter = new MovingAverageFilter();
} else {
new_magnitude.filter = new MedianFilter();
}
new_magnitude.filter->resize(_sensor_report_every);
_magnitudes.push_back(new_magnitude);
DEBUG_MSG_P(PSTR("[SENSOR] -> %s:%d\n"), magnitudeTopic(type).c_str(), _counts[type]);
_counts[type] = _counts[type] + 1;
}
// Hook callback
_sensors[i]->onEvent([i](unsigned char type, double value) {
_sensorCallback(i, type, value);
});
// Custom initializations
#if MICS2710_SUPPORT
if (_sensors[i]->getID() == SENSOR_MICS2710_ID) {
MICS2710Sensor * sensor = (MICS2710Sensor *) _sensors[i];
sensor->setR0(getSetting("snsR0", MICS2710_R0).toInt());
}
#endif // MICS2710_SUPPORT
#if MICS5525_SUPPORT
if (_sensors[i]->getID() == SENSOR_MICS5525_ID) {
MICS5525Sensor * sensor = (MICS5525Sensor *) _sensors[i];
sensor->setR0(getSetting("snsR0", MICS5525_R0).toInt());
}
#endif // MICS5525_SUPPORT
#if EMON_ANALOG_SUPPORT
if (_sensors[i]->getID() == SENSOR_EMON_ANALOG_ID) {
EmonAnalogSensor * sensor = (EmonAnalogSensor *) _sensors[i];
sensor->setCurrentRatio(0, getSetting("pwrRatioC", EMON_CURRENT_RATIO).toFloat());
sensor->setVoltage(getSetting("pwrVoltage", EMON_MAINS_VOLTAGE).toInt());
double value = _sensorEnergyTotal();
if (value > 0) sensor->resetEnergy(0, value);
}
#endif // EMON_ANALOG_SUPPORT
#if HLW8012_SUPPORT
if (_sensors[i]->getID() == SENSOR_HLW8012_ID) {
HLW8012Sensor * sensor = (HLW8012Sensor *) _sensors[i];
double value;
value = getSetting("pwrRatioC", HLW8012_CURRENT_RATIO).toFloat();
if (value > 0) sensor->setCurrentRatio(value);
value = getSetting("pwrRatioV", HLW8012_VOLTAGE_RATIO).toFloat();
if (value > 0) sensor->setVoltageRatio(value);
value = getSetting("pwrRatioP", HLW8012_POWER_RATIO).toFloat();
if (value > 0) sensor->setPowerRatio(value);
value = _sensorEnergyTotal();
if (value > 0) sensor->resetEnergy(value);
}
#endif // HLW8012_SUPPORT
#if ADE7953_SUPPORT
if (_sensors[i]->getID() == SENSOR_ADE7953_ID) {
ADE7953Sensor * sensor = (ADE7953Sensor *) _sensors[i];
unsigned int dev_count = sensor->getTotalDevices();
for(unsigned char dev = 0; dev < dev_count; dev++) {
double value = _sensorEnergyTotal(dev);
if (value > 0) sensor->resetEnergy(dev, value);
}
}
#endif // ADE7953_SUPPORT
#if CSE7766_SUPPORT
if (_sensors[i]->getID() == SENSOR_CSE7766_ID) {
CSE7766Sensor * sensor = (CSE7766Sensor *) _sensors[i];
double value;
value = getSetting("pwrRatioC", 0).toFloat();
if (value > 0) sensor->setCurrentRatio(value);
value = getSetting("pwrRatioV", 0).toFloat();
if (value > 0) sensor->setVoltageRatio(value);
value = getSetting("pwrRatioP", 0).toFloat();
if (value > 0) sensor->setPowerRatio(value);
value = _sensorEnergyTotal();
if (value > 0) sensor->resetEnergy(value);
}
#endif // CSE7766_SUPPORT
#if PULSEMETER_SUPPORT
if (_sensors[i]->getID() == SENSOR_PULSEMETER_ID) {
PulseMeterSensor * sensor = (PulseMeterSensor *) _sensors[i];
sensor->setEnergyRatio(getSetting("pwrRatioE", sensor->getEnergyRatio()).toInt());
}
#endif // PULSEMETER_SUPPORT
}
}
void _sensorConfigure() {
// General sensor settings
_sensor_read_interval = 1000 * constrain(getSetting("snsRead", SENSOR_READ_INTERVAL).toInt(), SENSOR_READ_MIN_INTERVAL, SENSOR_READ_MAX_INTERVAL);
_sensor_report_every = constrain(getSetting("snsReport", SENSOR_REPORT_EVERY).toInt(), SENSOR_REPORT_MIN_EVERY, SENSOR_REPORT_MAX_EVERY);
_sensor_save_every = getSetting("snsSave", SENSOR_SAVE_EVERY).toInt();
_sensor_realtime = getSetting("apiRealTime", API_REAL_TIME_VALUES).toInt() == 1;
_sensor_power_units = getSetting("pwrUnits", SENSOR_POWER_UNITS).toInt();
_sensor_energy_units = getSetting("eneUnits", SENSOR_ENERGY_UNITS).toInt();
_sensor_temperature_units = getSetting("tmpUnits", SENSOR_TEMPERATURE_UNITS).toInt();
_sensor_temperature_correction = getSetting("tmpCorrection", SENSOR_TEMPERATURE_CORRECTION).toFloat();
_sensor_humidity_correction = getSetting("humCorrection", SENSOR_HUMIDITY_CORRECTION).toFloat();
_sensor_energy_reset_ts = getSetting("snsResetTS", "");
_sensor_lux_correction = getSetting("luxCorrection", SENSOR_LUX_CORRECTION).toFloat();
// Specific sensor settings
for (unsigned char i=0; i<_sensors.size(); i++) {
#if MICS2710_SUPPORT
if (_sensors[i]->getID() == SENSOR_MICS2710_ID) {
if (getSetting("snsResetCalibration", 0).toInt() == 1) {
MICS2710Sensor * sensor = (MICS2710Sensor *) _sensors[i];
sensor->calibrate();
setSetting("snsR0", sensor->getR0());
}
}
#endif // MICS2710_SUPPORT
#if MICS5525_SUPPORT
if (_sensors[i]->getID() == SENSOR_MICS5525_ID) {
if (getSetting("snsResetCalibration", 0).toInt() == 1) {
MICS5525Sensor * sensor = (MICS5525Sensor *) _sensors[i];
sensor->calibrate();
setSetting("snsR0", sensor->getR0());
}
}
#endif // MICS5525_SUPPORT
#if EMON_ANALOG_SUPPORT
if (_sensors[i]->getID() == SENSOR_EMON_ANALOG_ID) {
double value;
EmonAnalogSensor * sensor = (EmonAnalogSensor *) _sensors[i];
if ((value = getSetting("pwrExpectedP", 0).toInt())) {
sensor->expectedPower(0, value);
setSetting("pwrRatioC", sensor->getCurrentRatio(0));
}
if (getSetting("pwrResetCalibration", 0).toInt() == 1) {
sensor->setCurrentRatio(0, EMON_CURRENT_RATIO);
delSetting("pwrRatioC");
}
if (getSetting("pwrResetE", 0).toInt() == 1) {
sensor->resetEnergy();
delSetting("eneTotal", 0);
_sensorResetTS();
}
sensor->setVoltage(getSetting("pwrVoltage", EMON_MAINS_VOLTAGE).toInt());
}
#endif // EMON_ANALOG_SUPPORT
#if EMON_ADC121_SUPPORT
if (_sensors[i]->getID() == SENSOR_EMON_ADC121_ID) {
EmonADC121Sensor * sensor = (EmonADC121Sensor *) _sensors[i];
if (getSetting("pwrResetE", 0).toInt() == 1) {
sensor->resetEnergy();
delSetting("eneTotal", 0);
_sensorResetTS();
}
}
#endif
#if EMON_ADS1X15_SUPPORT
if (_sensors[i]->getID() == SENSOR_EMON_ADS1X15_ID) {
EmonADS1X15Sensor * sensor = (EmonADS1X15Sensor *) _sensors[i];
if (getSetting("pwrResetE", 0).toInt() == 1) {
sensor->resetEnergy();
delSetting("eneTotal", 0);
_sensorResetTS();
}
}
#endif
#if HLW8012_SUPPORT
if (_sensors[i]->getID() == SENSOR_HLW8012_ID) {
double value;
HLW8012Sensor * sensor = (HLW8012Sensor *) _sensors[i];
if ((value = getSetting("pwrExpectedC", 0).toFloat())) {
sensor->expectedCurrent(value);
setSetting("pwrRatioC", sensor->getCurrentRatio());
}
if ((value = getSetting("pwrExpectedV", 0).toInt())) {
sensor->expectedVoltage(value);
setSetting("pwrRatioV", sensor->getVoltageRatio());
}
if ((value = getSetting("pwrExpectedP", 0).toInt())) {
sensor->expectedPower(value);
setSetting("pwrRatioP", sensor->getPowerRatio());
}
if (getSetting("pwrResetE", 0).toInt() == 1) {
sensor->resetEnergy();
delSetting("eneTotal", 0);
_sensorResetTS();
}
if (getSetting("pwrResetCalibration", 0).toInt() == 1) {
sensor->resetRatios();
delSetting("pwrRatioC");
delSetting("pwrRatioV");
delSetting("pwrRatioP");
}
}
#endif // HLW8012_SUPPORT
#if CSE7766_SUPPORT
if (_sensors[i]->getID() == SENSOR_CSE7766_ID) {
double value;
CSE7766Sensor * sensor = (CSE7766Sensor *) _sensors[i];
if ((value = getSetting("pwrExpectedC", 0).toFloat())) {
sensor->expectedCurrent(value);
setSetting("pwrRatioC", sensor->getCurrentRatio());
}
if ((value = getSetting("pwrExpectedV", 0).toInt())) {
sensor->expectedVoltage(value);
setSetting("pwrRatioV", sensor->getVoltageRatio());
}
if ((value = getSetting("pwrExpectedP", 0).toInt())) {
sensor->expectedPower(value);
setSetting("pwrRatioP", sensor->getPowerRatio());
}
if (getSetting("pwrResetE", 0).toInt() == 1) {
sensor->resetEnergy();
delSetting("eneTotal", 0);
_sensorResetTS();
}
if (getSetting("pwrResetCalibration", 0).toInt() == 1) {
sensor->resetRatios();
delSetting("pwrRatioC");
delSetting("pwrRatioV");
delSetting("pwrRatioP");
}
}
#endif // CSE7766_SUPPORT
#if PULSEMETER_SUPPORT
if (_sensors[i]->getID() == SENSOR_PULSEMETER_ID) {
PulseMeterSensor * sensor = (PulseMeterSensor *) _sensors[i];
if (getSetting("pwrResetE", 0).toInt() == 1) {
sensor->resetEnergy();
delSetting("eneTotal", 0);
_sensorResetTS();
}
sensor->setEnergyRatio(getSetting("pwrRatioE", sensor->getEnergyRatio()).toInt());
}
#endif // PULSEMETER_SUPPORT
#if PZEM004T_SUPPORT
if (_sensors[i]->getID() == SENSOR_PZEM004T_ID) {
PZEM004TSensor * sensor = (PZEM004TSensor *) _sensors[i];
if (getSetting("pwrResetE", 0).toInt() == 1) {
unsigned char dev_count = sensor->getAddressesCount();
for(unsigned char dev = 0; dev < dev_count; dev++) {
sensor->resetEnergy(dev, 0);
delSetting("eneTotal", dev);
}
_sensorResetTS();
}
}
#endif // PZEM004T_SUPPORT
#if ADE7953_SUPPORT
if (_sensors[i]->getID() == SENSOR_ADE7953_ID) {
ADE7953Sensor * sensor = (ADE7953Sensor *) _sensors[i];
if (getSetting("pwrResetE", 0).toInt() == 1) {
unsigned char dev_count = sensor->getTotalDevices();
for(unsigned char dev = 0; dev < dev_count; dev++) {
sensor->resetEnergy(dev);
delSetting("eneTotal", dev);
}
_sensorResetTS();
}
}
#endif // ADE7953_SUPPORT
}
// Update filter sizes and reset energy if needed
{
const bool reset_saved_energy = 0 == _sensor_save_every;
for (unsigned char i=0; i<_magnitudes.size(); i++) {
_magnitudes[i].filter->resize(_sensor_report_every);
if ((_magnitudes[i].type == MAGNITUDE_ENERGY) && reset_saved_energy) {
delSetting("eneTotal", _magnitudes[i].global);
}
}
}
// Remove calibration values
// TODO: do not use settings for one-shot calibration
delSetting("snsResetCalibration");
delSetting("pwrExpectedP");
delSetting("pwrExpectedC");
delSetting("pwrExpectedV");
delSetting("pwrResetCalibration");
delSetting("pwrResetE");
saveSettings();
}
void _sensorReport(unsigned char index, double value) {
sensor_magnitude_t magnitude = _magnitudes[index];
unsigned char decimals = magnitude.decimals;
// XXX: ensure that the received 'value' will fit here
// dtostrf 2nd arg only controls leading zeroes and the
// 3rd is only for the part after the dot
char buffer[64];
dtostrf(value, 1, decimals, buffer);
#if BROKER_SUPPORT
#if not BROKER_REAL_TIME
SensorBroker::Publish(magnitudeTopic(magnitude.type), magnitude.global, value, buffer);
#endif
#endif
#if MQTT_SUPPORT
mqttSend(magnitudeTopicIndex(index).c_str(), buffer);
#if SENSOR_PUBLISH_ADDRESSES
char topic[32];
snprintf(topic, sizeof(topic), "%s/%s", SENSOR_ADDRESS_TOPIC, magnitudeTopic(magnitude.type).c_str());
if (SENSOR_USE_INDEX || (_counts[magnitude.type] > 1)) {
mqttSend(topic, magnitude.global, magnitude.sensor->address(magnitude.local).c_str());
} else {
mqttSend(topic, magnitude.sensor->address(magnitude.local).c_str());
}
#endif // SENSOR_PUBLISH_ADDRESSES
#endif // MQTT_SUPPORT
#if THINGSPEAK_SUPPORT
tspkEnqueueMeasurement(index, buffer);
#endif
#if DOMOTICZ_SUPPORT
{
char key[15];
snprintf_P(key, sizeof(key), PSTR("dczMagnitude%d"), index);
if (magnitude.type == MAGNITUDE_HUMIDITY) {
int status;
if (value > 70) {
status = HUMIDITY_WET;
} else if (value > 45) {
status = HUMIDITY_COMFORTABLE;
} else if (value > 30) {
status = HUMIDITY_NORMAL;
} else {
status = HUMIDITY_DRY;
}
char status_buf[5];
itoa(status, status_buf, 10);
domoticzSend(key, buffer, status_buf);
} else {
domoticzSend(key, 0, buffer);
}
}
#endif // DOMOTICZ_SUPPORT
}
// -----------------------------------------------------------------------------
// Public
// -----------------------------------------------------------------------------
unsigned char sensorCount() {
return _sensors.size();
}
unsigned char magnitudeCount() {
return _magnitudes.size();
}
String magnitudeName(unsigned char index) {
if (index < _magnitudes.size()) {
sensor_magnitude_t magnitude = _magnitudes[index];
return magnitude.sensor->slot(magnitude.local);
}
return String();
}
unsigned char magnitudeType(unsigned char index) {
if (index < _magnitudes.size()) {
return int(_magnitudes[index].type);
}
return MAGNITUDE_NONE;
}
double magnitudeValue(unsigned char index) {
if (index < _magnitudes.size()) {
return _sensor_realtime ? _magnitudes[index].last : _magnitudes[index].reported;
}
return DBL_MIN;
}
unsigned char magnitudeIndex(unsigned char index) {
if (index < _magnitudes.size()) {
return int(_magnitudes[index].global);
}
return 0;
}
String magnitudeTopic(unsigned char type) {
char buffer[16] = {0};
if (type < MAGNITUDE_MAX) strncpy_P(buffer, magnitude_topics[type], sizeof(buffer));
return String(buffer);
}
String magnitudeTopicIndex(unsigned char index) {
char topic[32] = {0};
if (index < _magnitudes.size()) {
sensor_magnitude_t magnitude = _magnitudes[index];
if (SENSOR_USE_INDEX || (_counts[magnitude.type] > 1)) {
snprintf(topic, sizeof(topic), "%s/%u", magnitudeTopic(magnitude.type).c_str(), magnitude.global);
} else {
snprintf(topic, sizeof(topic), "%s", magnitudeTopic(magnitude.type).c_str());
}
}
return String(topic);
}
String magnitudeUnits(unsigned char type) {
char buffer[8] = {0};
if (type < MAGNITUDE_MAX) {
if ((type == MAGNITUDE_TEMPERATURE) && (_sensor_temperature_units == TMP_FAHRENHEIT)) {
strncpy_P(buffer, magnitude_fahrenheit, sizeof(buffer));
} else if (
(type == MAGNITUDE_ENERGY || type == MAGNITUDE_ENERGY_DELTA) &&
(_sensor_energy_units == ENERGY_KWH)) {
strncpy_P(buffer, magnitude_kwh, sizeof(buffer));
} else if (
(type == MAGNITUDE_POWER_ACTIVE || type == MAGNITUDE_POWER_APPARENT || type == MAGNITUDE_POWER_REACTIVE) &&
(_sensor_power_units == POWER_KILOWATTS)) {
strncpy_P(buffer, magnitude_kw, sizeof(buffer));
} else {
strncpy_P(buffer, magnitude_units[type], sizeof(buffer));
}
}
return String(buffer);
}
// -----------------------------------------------------------------------------
void sensorSetup() {
// Backwards compatibility
moveSetting("eneTotal", "eneTotal0");
moveSetting("powerUnits", "pwrUnits");
moveSetting("energyUnits", "eneUnits");
// Update PZEM004T energy total across multiple devices
moveSettings("pzEneTotal", "eneTotal");
// Load sensors
_sensorLoad();
_sensorInit();
// Configure stored values
_sensorConfigure();
// Websockets
#if WEB_SUPPORT
wsRegister()
.onVisible(_sensorWebSocketOnVisible)
.onConnected(_sensorWebSocketOnConnected)
.onData(_sensorWebSocketSendData)
.onKeyCheck(_sensorWebSocketOnKeyCheck);
#endif
// API
#if API_SUPPORT
_sensorAPISetup();
#endif
// Terminal
#if TERMINAL_SUPPORT
_sensorInitCommands();
#endif
// Main callbacks
espurnaRegisterLoop(sensorLoop);
espurnaRegisterReload(_sensorConfigure);
}
void sensorLoop() {
// Check if we still have uninitialized sensors
static unsigned long last_init = 0;
if (!_sensors_ready) {
if (millis() - last_init > SENSOR_INIT_INTERVAL) {
last_init = millis();
_sensorInit();
}
}
if (_magnitudes.size() == 0) return;
// Tick hook
_sensorTick();
// Check if we should read new data
static unsigned long last_update = 0;
static unsigned long report_count = 0;
if (millis() - last_update > _sensor_read_interval) {
last_update = millis();
report_count = (report_count + 1) % _sensor_report_every;
double value_raw; // holds the raw value as the sensor returns it
double value_show; // holds the processed value applying units and decimals
double value_filtered; // holds the processed value applying filters, and the units and decimals
// Pre-read hook
_sensorPre();
// Get the first relay state
#if SENSOR_POWER_CHECK_STATUS
bool relay_off = (relayCount() == 1) && (relayStatus(0) == 0);
#endif
// Get readings
for (unsigned char i=0; i<_magnitudes.size(); i++) {
sensor_magnitude_t magnitude = _magnitudes[i];
if (magnitude.sensor->status()) {
// -------------------------------------------------------------
// Instant value
// -------------------------------------------------------------
value_raw = magnitude.sensor->value(magnitude.local);
// Completely remove spurious values if relay is OFF
#if SENSOR_POWER_CHECK_STATUS
if (relay_off) {
if (magnitude.type == MAGNITUDE_POWER_ACTIVE ||
magnitude.type == MAGNITUDE_POWER_REACTIVE ||
magnitude.type == MAGNITUDE_POWER_APPARENT ||
magnitude.type == MAGNITUDE_CURRENT ||
magnitude.type == MAGNITUDE_ENERGY_DELTA
) {
value_raw = 0;
}
}
#endif
_magnitudes[i].last = value_raw;
// -------------------------------------------------------------
// Processing (filters)
// -------------------------------------------------------------
magnitude.filter->add(value_raw);
// Special case for MovingAverageFilter
if (MAGNITUDE_COUNT == magnitude.type ||
MAGNITUDE_GEIGER_CPM ==magnitude. type ||
MAGNITUDE_GEIGER_SIEVERT == magnitude.type) {
value_raw = magnitude.filter->result();
}
// -------------------------------------------------------------
// Procesing (units and decimals)
// -------------------------------------------------------------
value_show = _magnitudeProcess(magnitude.type, magnitude.decimals, value_raw);
#if BROKER_REAL_TIME
{
char buffer[64];
dtostrf(value_show, 1-sizeof(buffer), magnitude.decimals, buffer);
SensorBroker::Publish(magnitudeTopic(magnitude.type), magnitude.global, value_show, buffer);
}
#endif
// -------------------------------------------------------------
// Debug
// -------------------------------------------------------------
#if SENSOR_DEBUG
{
char buffer[64];
dtostrf(value_show, 1, magnitude.decimals, buffer);
DEBUG_MSG_P(PSTR("[SENSOR] %s - %s: %s%s\n"),
magnitude.sensor->slot(magnitude.local).c_str(),
magnitudeTopic(magnitude.type).c_str(),
buffer,
magnitudeUnits(magnitude.type).c_str()
);
}
#endif // SENSOR_DEBUG
// -------------------------------------------------------------
// Report
// (we do it every _sensor_report_every readings)
// -------------------------------------------------------------
bool report = (0 == report_count);
if ((MAGNITUDE_ENERGY == magnitude.type) && (magnitude.max_change > 0)) {
// for MAGNITUDE_ENERGY, filtered value is last value
report = (fabs(value_show - magnitude.reported) >= magnitude.max_change);
} // if ((MAGNITUDE_ENERGY == magnitude.type) && (magnitude.max_change > 0))
if (report) {
value_filtered = magnitude.filter->result();
value_filtered = _magnitudeProcess(magnitude.type, magnitude.decimals, value_filtered);
magnitude.filter->reset();
// Check if there is a minimum change threshold to report
if (fabs(value_filtered - magnitude.reported) >= magnitude.min_change) {
_magnitudes[i].reported = value_filtered;
_sensorReport(i, value_filtered);
} // if (fabs(value_filtered - magnitude.reported) >= magnitude.min_change)
// Persist total energy value
if (MAGNITUDE_ENERGY == magnitude.type) {
_sensorEnergyTotal(magnitude.global, value_raw);
}
} // if (report_count == 0)
} // if (magnitude.sensor->status())
} // for (unsigned char i=0; i<_magnitudes.size(); i++)
// Post-read hook
_sensorPost();
#if WEB_SUPPORT
wsPost(_sensorWebSocketSendData);
#endif
#if THINGSPEAK_SUPPORT
if (report_count == 0) tspkFlush();
#endif
}
}
#endif // SENSOR_SUPPORT